Database Users

Can't flash files using Odin

Hello guys,
I am trying to install CWM recovery. As you certainly know the easiest way is by flashing the file via Odin.
Thing is I'm having a hard time trying to do what might look easy at first glance.
When opening Odin 3.09 as administrator, it is able to recognize my rooted 9505 (I'm on Samsung stock firmware) whenever I'm in download mode, but after selecting the corresponding CWM file and clicking Start, I get the following:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I tried flashing the PIT partition file for my phone model, but I also get this:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
I tried flashing the files independently and both at the same time. It always failed.
What can i do? I really don't know what else should be done to fix this.

I'm getting
Secure Check Fail: apnhlos
when I try to flash any PDA-compatible file in Odin.
What does that even mean? Android sure has some of the most cryptic error messages I have ever seen.

Have you tried using Odin 3.15?
Sent from my HTC One using Tapatalk 4

squabbi said:
Have you tried using Odin 3.15?
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Which version is that? Can you provide a link?

Alphadan said:
Which version is that? Can you provide a link?
Click to expand...
Click to collapse
Oh my bad. I was mistaking it for another program.
The version I used to root my pho e was Odin 3.07
http://samsung-updates.com/Odin307.zip
Also I presume you have the Samsung usb drivers installed?
Sent from my HTC One using Tapatalk 4

Don't forget to exit, or better yet uninstall, Kies... This can affect flashing too...

Did you use the original samsung cable for flashing?Using another cable often cause issues.

Butterfly11 said:
Did you use the original samsung cable for flashing?Using another cable often cause issues.
Click to expand...
Click to collapse
The thing is that i have managed to actually root the phone via Odin using CF Auto root ( I had to click "Start" twice, but i ended up successfully rooting the phone)
I just don't know what I'm doing wrong this time around that it's preventing it from flashing files
Any more ideas? Cheers.

Same probleme here
Alphadan said:
The thing is that i have managed to actually root the phone via Odin using CF Auto root ( I had to click "Start" twice, but i ended up successfully rooting the phone)
I just don't know what I'm doing wrong this time around that it's preventing it from flashing files
Any more ideas? Cheers.
Click to expand...
Click to collapse
Same problem here, the only difference is I was just doing a firmware update via Odin and something went wrong (I don't know what). The phone says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" but Kies is not recognizing the phone.
Please help!

stuck in bootloop even after flashing new rom

Hello,
So to start off I had encrypted CyanogenMOd 12.1 nightlies running on my T-Mobile Samsung Galaxy S5 with TWRP 2.8.7 recovery without any problems. I went to reboot and it got stuck in a bootloop, I tried restarting it and same thing. I tried wiping cache/dalvik and same thing. Sometimes it would make it to the "optimizing apps" screen and indefinitely hang on "starting apps", but mostly it gets stuck on the boot animation. I hadn't added or deleted anything prior to this happening. I had tried a number of possible solutions from various threads, none of which solved my issue. (Also, it never asked me to enter my password to startup which it usually did)
I then tried wiping dalvik, system , data, internal storage, and cache and flashing a fresh rom which did not work either. This time the bootloop only ever occurs on the boot animation screen.
What should be my next course of action?

Flash a stock ROM along with the PIT file for your model S5 (Flash both at the same time in ODIN)

*Detection* said:
Flash a stock ROM along with the PIT file for your model S5 (Flash both at the same time in ODIN)
Click to expand...
Click to collapse
I'm having trouble getting a stock rom, they keep corrupting at the end of the download and the download speed is throttled. Do you know of a good source to obtain a stock rom that won't take 2+ hours to download?

What model S5 is it?
Eg: Mine is G900F

*Detection* said:
What model S5 is it?
Eg: Mine is G900F
Click to expand...
Click to collapse
G900T

EzStyles said:
G900T
Click to expand...
Click to collapse
Try this link
Code:
http://am4-r1f7-stor06.uploaded.net/dl/42f1fae6-1bca-4e2b-ae7a-f1959a6f1f9e

*Detection* said:
Try this link
Code:
http://am4-r1f7-stor06.uploaded.net/dl/42f1fae6-1bca-4e2b-ae7a-f1959a6f1f9e
Click to expand...
Click to collapse
Awesome thank you that is working great! Much faster than the download links I have been finding. I will report back shortly with results

Good luck

*Detection* said:
Good luck
Click to expand...
Click to collapse
So I tried flashing the file from that link along with a PIT file that I found on another thread on this site but it fails to flash.
The message from Odin is:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The message on my phone says:
Secure check fail : PIT
Would this be a bad pit file?

EzStyles said:
So I tried flashing the file from that link along with a PIT file that I found on another thread on this site but it fails to flash.
The message from Odin is:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The message on my phone says:
Secure check fail : PIT
Would this be a bad pit file?
Click to expand...
Click to collapse
Are you 100% sure about the model S5 you're trying to flash?
Check Settings > General > About
I've just spent the day with another member, who had the same error FAIL! message, and he was trying to flash a G900F ROM and PIT onto a G901F

*Detection* said:
Are you 100% sure about the model S5 you're trying to flash?
Check Settings > General > About
I've just spent the day with another member, who had the same error FAIL! message, and he was trying to flash a G900F ROM and PIT onto a G901F
Click to expand...
Click to collapse
100% positive. It's T-Mobile, I have the box with that model number and in download mode it shows product name: SM-G900T
Perhaps the files need to have a specific name in order to flash properly? I've run into that issue when reflashing motherboards
So I tried flashing without the PIT file and it "passed" according to odin but it is just stuck on the "Samsung Galaxy S5 Powered by Android" screen now

Ok, So i tried flashing the rom itself one more time and this time it worked! My phone is back to working now. Or, at least until I reboot again > I'll be back if there's any more issues haha. Thanks again for your help

Same Problem
EzStyles said:
So I tried flashing the file from that link along with a PIT file that I found on another thread on this site but it fails to flash.
The message from Odin is:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The message on my phone says:
Secure check fail : PIT
Would this be a bad pit file?
Click to expand...
Click to collapse
Hi, I have a Galaxy S5 SM-G900M and it's in a bootloop, I tried to intall the stock rom with ODIN and Kies but still not work, maybe somebody have the PIT file for this model?

Cendrez said:
Hi, I have a Galaxy S5 SM-G900M and it's in a bootloop, I tried to intall the stock rom with ODIN and Kies but still not work, maybe somebody have the PIT file for this model?
Click to expand...
Click to collapse
Did you have ODIN and Kies running at the same time? Make sure Kies service is stopped in system before running ODIN

Trying to Flash Back To Stock S7 930A

I have try to flash back to stock but I get the same error every time. I have tried about 5 different flash.
About once a week it will get bricked. And I have to factory reset. That is why I want to flash back.
This is the error
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for the help

firehawk321 said:
I have try to flash back to stock but I get the same error every time. I have tried about 5 different flash.
About once a week it will get bricked. And I have to factory reset. That is why I want to flash back.
This is the error
Removed!!
Added!!
Odin engine v(ID:3.1203)..
File analysis..
SetupConnection..
Initialzation..
FAIL! Model dismatch fail
All threads completed. (succeed 0 / failed 1)
Thanks for the help
Click to expand...
Click to collapse
Does your Odin error really say FAIL!! Model Dismatch or did it say "md5 mismatch?" I wanted to make sure that was not a typo.
Sent from my Nexus 6 using XDA-Developers mobile app

fast69mopar said:
Does your Odin error really say FAIL!! Model Dismatch or did it say "md5 mismatch?" I wanted to make sure that was not a typo.
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
it really says that. I copied and pasted that.

There was no failure on the phones boot loader screen either.

Im having the same issue. My phone has a sticker that says it is 930A and the rom im using file name is G930AATT1APB5_ATT1APB5_ATT_USA_v6.0.1_Repair_Firmware but yea its saying model mismatch

BrokenMessiah said:
Im having the same issue. My phone has a sticker that says it is 930A and the rom im using file name is G930AATT1APB5_ATT1APB5_ATT_USA_v6.0.1_Repair_Firmware but yea its saying model mismatch
Click to expand...
Click to collapse
well mine says model " dismatch " not model mismatch

I put a custom rom on it maybe that will fix it.

I got mine working. I used this rom and this odin

firehawk321 said:
I have try to flash back to stock but I get the same error every time. I have tried about 5 different flash.
About once a week it will get bricked. And I have to factory reset. That is why I want to flash back.
This is the error
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for the help
Click to expand...
Click to collapse
I had the same problem. I downloaded version 3.12.3 of Odin and used that instead and that worked.

WARNING: PHE update not downgradeable

Just tried to downgrade the Note 7 after updating to PHE and it's a no go.
Message on the phone says: SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
Here is Odin's log:
<ID:0/005> Odin engine v(ID:3.1205)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't think I'm doing anything wrong. I've upgraded and downgraded with Odin a few times before without any problems.
I've tried both PH3 and PH9 firmware versions.
It's not looking good for rooting...

lightning413 said:
Just tried to downgrade the Note 7 after updating to PHE and it's a no go.
Message on the phone says: SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
Here is Odin's log:
<ID:0/005> Odin engine v(ID:3.1205)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't think I'm doing anything wrong. I've upgraded and downgraded with Odin a few times before without any problems.
I've tried both PH3 and PH9 firmware versions.
It's not looking good for rooting...
Click to expand...
Click to collapse
No you're correct. It doesn't have the ability to downgrade.

Do the replacement notes come with the PHE update? Is the update forced? I need to get my phone replaced at Best Buy but I can't lose root.

zeroempathy said:
Do the replacement notes come with the PHE update? Is the update forced? I need to get my phone replaced at Best Buy but I can't lose root.
Click to expand...
Click to collapse
I grabbed my replacement today and it came with PH9, though it sure wanted to install PHE shortly after initial boot. It's giving the option to delay for now.

zeroempathy said:
Do the replacement notes come with the PHE update? Is the update forced? I need to get my phone replaced at Best Buy but I can't lose root.
Click to expand...
Click to collapse
I just got mine and while I was there, I saw them activating and updating everyone's phone so when it came to my turn, I ask for them not to activate. I told them I didn't have time to go through it and would do it later when I got home.
It's still at PH9.
I just grabbed the full PHE firmware update and am talking to another dev to try to find out if there is a chance we can modify this update to remove the rev lock and root.
Will keep everyone posted.

Did you disable OEM lock in developer tools?
Sent from my SM-N930P using XDA-Developers mobile app

richardjrdeal said:
Did you disable OEM lock in developer tools?
Sent from my SM-N930P using XDA-Developers mobile app
Click to expand...
Click to collapse
by my understanding, that only relates to bootloader unlocking, and does not work for said purpose.

How can I use the IMEI to find the telephone number that was attached to the device???
Sent from my SM-N930P using Tapatalk

Sterist said:
by my understanding, that only relates to bootloader unlocking, and does not work for said purpose.
Click to expand...
Click to collapse
It keeps someone from wiping your phone. Pretty sure if you unlock it, it will allow you to Odin back.
Sent from my SM-N930P using XDA-Developers mobile app

I was reading on a Note 7 thread was someone that reset their phone ( http://forum.xda-developers.com/note-7/how-to/note-7-n930fd-f-downgrade-to-100-t3469787/page3) to get it back to pre- PHE update. Has anybody with a sprint phone tried to reset their phone before flashing in odin to downgrade.?

There is no way to have it downgraded
Sent from my SM-N930P using Tapatalk

sterstar2012 said:
There is no way to have it downgraded
Sent from my SM-N930P using Tapatalk
Click to expand...
Click to collapse
hi. i have a question. When my phone sprint note 7 has pk1 made unlock carrier. First using odin put a combine rom COMBINATION_FA60_N930VVRU2APIB_CL9208905_QB11007042_REV00_user_mid_noship_MULTI_CERT and then using samsung tool pro to unlock. after this put a PHE by odin and now working unlock. is this a downgrade or not?. i want to have ph3 or ph9 for root and avoid kill my phone and use my phone like a smartphone.

https://drive.google.com/file/d/0Bw6tEApjkJtRRm05bHN4SXhEUkU/view

Unroot and reset back to "as new"

So I got a Samsung Galaxy S8, and installed TWRP. I by mistake deleted the OS, so I have no OS on the phone now, I want to remove all the root and ****, and make it like a new one without any root. How can I do this?
I have tried multiple stuff using odin, but it looks like it stuck on <ID:0/005> SetupConnection.. all the time. Help please?

Have you tried flashing the same android version as before through Odin using the original cable?
i.e. you had android 7.0 and you're flashing 7.0 now and not trying to upgrade/downgrade

SevenD2 said:
Have you tried flashing the same android version as before through Odin using the original cable?
i.e. you had android 7.0 and you're flashing 7.0 now and not trying to upgrade/downgrade
Click to expand...
Click to collapse
How exactly? All I know is that I had Android 8.0, and bought the phone from Norway.

xScylez said:
How exactly? All I know is that I had Android 8.0, and bought the phone from Norway.
Click to expand...
Click to collapse
Follow this thread:
https://forum.xda-developers.com/galaxy-s8/how-to/official-stock-firmware-update-odin-t3598172
I'm assuming it's a G950F if you purchased it in Norway so the official firmware from:
https://www.sammobile.com/firmwares/galaxy-s8/SM-G950F/
and then follow the xda thread above

SevenD2 said:
Follow this thread:
https://forum.xda-developers.com/galaxy-s8/how-to/official-stock-firmware-update-odin-t3598172
I'm assuming it's a G950F if you purchased it in Norway so the official firmware from:
https://www.sammobile.com/firmwares/galaxy-s8/SM-G950F/
and then follow the xda thread above
Click to expand...
Click to collapse
I will have a look at it when I get home tonight.
I did manage to install GoogleWiz : - but I want to just reset everything, and make it as new. Hope it works with the links you sent.
EDIT: Haha the link you sent with download says Approx. 15 kB/Sec. This will take a day to download

xScylez said:
I will have a look at it when I get home tonight.
I did manage to install GoogleWiz : - but I want to just reset everything, and make it as new. Hope it works with the links you sent.
EDIT: Haha the link you sent with download says Approx. 15 kB/Sec. This will take a day to download
Click to expand...
Click to collapse
Use this instead https://updato.com/firmware-archive-select-model

update Odin

xScylez said:
So I got a Samsung Galaxy S8, and installed TWRP. I by mistake deleted the OS, so I have no OS on the phone now, I want to remove all the root and ****, and make it like a new one without any root. How can I do this?
I have tried multiple stuff using odin, but it looks like it stuck on <ID:0/005> SetupConnection.. all the time. Help please?
Click to expand...
Click to collapse
note that you will not be able to restore it 100%. Knox is and will be forever broken on your phone. And for that, all Knox related functions won't work either.

SevenD2 said:
Follow this thread:
https://forum.xda-developers.com/galaxy-s8/how-to/official-stock-firmware-update-odin-t3598172
I'm assuming it's a G950F if you purchased it in Norway so the official firmware from:
https://www.sammobile.com/firmwares/galaxy-s8/SM-G950F/
and then follow the xda thread above
Click to expand...
Click to collapse
After loading all and press Start i get this:
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 5641 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and when using the home_csc i get this:
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> userdata.img
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 3834 M
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)

Maybe trying using Prince comsy Odin
https://drive.google.com/file/d/1enVG5a_ocyjhRlta8AX_0b7LLoHWciVU/view
(Not my link)
Given you were able to install TWRP I assume your phone can connect to your laptop so idk why it's not working. A quick Google search found people used older versions of Odin to get it working.