Hello guys. This is my first Samsung device. It's network locked here in the Philippines and I flashed UK firmware to get Nougat update. Since thre is an official update available now in our country, I flashed the firmware downloaded from sammobile with CSC SMA (philippines Smart). The problem is, SIM 2 is not working for a different SIM card (ex. Globe). Does anyone know how to fix this issue? Before only SIM 1 is Network locked and SIM 2 is openline. Now they are both Network locked.
Up
Up
vince_junior said:
Up
Click to expand...
Click to collapse
As far as I know, Dual SIM phone has issues when trying to unlock the phone. they are problematic and sometimes they refuse to work. I recommend you take it to Samsung assistance, maybe they can do something with your firmware and make the phone work again.
Hi
I just purchased a S6 edge+ SM-G928A which is I believe from the at&t network in the usa, I purchased it from
a electronics retailer on ebay, the phone works perfect and came with MM installed however I want
to upgrade to Nougat and the at&t software updater refuses to download which I believe is down to
me not having a at&t sim card, something that is impossible for me as I am from the UK and currently use the three network.
My questions are
is it possible to upgrade the firmware and if so can I flash the usa firmware or do I have to find one that is international or european?
I semi familiar with using odin and flashing etc so that part I dont really need help with, I just need advice on flashing the right rom .
could i for instance flash 3 uks firmware for this phone? or another uk provider.
any advice appreciated.
Hello fellow S8 users,
I've recently purchased a Samsung S8 SM-G950FD from eBay as I wanted the Dual SIM capability. Version image attached, I'm not entirely sure where it's from.
Unfortunately the Samsung Pay version on the phone is in Chinese as are the promotion, images attached.
Can someone tell me if it's possible to get the Australian version on Samsung Pay on this phone?
Can I just update the ROM to an Australian version? If so, would I end up losing the Dual SIM capability?
Any help on this would be much appreciated.
Thank you.
Any suggestions?
kuri_2k said:
Hello fellow S8 users,
I've recently purchased a Samsung S8 SM-G950FD from eBay as I wanted the Dual SIM capability. Version image attached, I'm not entirely sure where it's from.
Unfortunately the Samsung Pay version on the phone is in Chinese as are the promotion, images attached.
Can someone tell me if it's possible to get the Australian version on Samsung Pay on this phone?
Can I just update the ROM to an Australian version? If so, would I end up losing the Dual SIM capability?
Any help on this would be much appreciated.
Thank you.
Click to expand...
Click to collapse
Your Australia cards should work as Australia already have support for Samsung Pay. I have setup few of my Indian cards with Australian version phone. I guess you need to bear with the Chinese though. Updating XSA room will definitely disable the Dual sim option and I am not sure 950FD support 950F.
venki5star said:
Your Australia cards should work as Australia already have support for Samsung Pay. I have setup few of my Indian cards with Australian version phone. I guess you need to bear with the Chinese though. Updating XSA room will definitely disable the Dual sim option and I am not sure 950FD support 950F.
Click to expand...
Click to collapse
Yeh the Samsung Pay Application doesn't like my American Express Card....
It states that Amex is not supported in my country, but in fact it's working on my Samsung S6, and my Gear 3.
So you think changing the firmware to AU I would lose the Dual SIM capabilities?
It might just be easier to try and get the Samsung Pay and Samsung Pay Framework from AU ROM and extract it to mine maybe?
If it's anything like the S7, you should be fine putting the Australian firmware on it. I got an S7 edge from the UAE and had to flash German firmware and the T-Mobile CSC to it for spay to finally work. It'll be trail and error, but the multi sim function never went away for me.
Since almost all the international S8/S8+s are on the multi CSC ROM, all you need to do is reset your phone (preferably from the recovery menu) and put in the Oz SIM and reboot. All the regional features are activated, and you get Oz SPAY.
Using that method, I am currently using the India SPAY on an Afghanistan S8+ (Dual sim) and Taiwanese S8 and both work with all cards.
cooolzzz_guy said:
Since almost all the international S8/S8+s are on the multi CSC ROM, all you need to do is reset your phone (preferably from the recovery menu) and put in the Oz SIM and reboot. All the regional features are activated, and you get Oz SPAY.
Using that method, I am currently using the India SPAY on an Afghanistan S8+ (Dual sim) and Taiwanese S8 and both work with all cards.
Click to expand...
Click to collapse
I've actually tried to restore to factory setting 6+ times with an assortment of sim cards from Vodafone, Optus, Telstra, Macquarie (Telstra variant), samsung pay keeps loading up as Taiwanese version (Chinese)...
I've recently asked a friend to extract his Samsung Pay & Framework.apk, it still loads Taiwan Samsung pay.
I think it's region locked?
I'm going to try and restore to XSA Firmware, apparently this worked for the S7 guys, whilst retaining Dual Sim functions.
neoslink1 said:
If it's anything like the S7, you should be fine putting the Australian firmware on it. I got an S7 edge from the UAE and had to flash German firmware and the T-Mobile CSC to it for spay to finally work. It'll be trail and error, but the multi sim function never went away for me.
Click to expand...
Click to collapse
Thank you! You've just reaffirmed what I actually just read in another forum, going to give it a try and will update my findings.
kuri_2k said:
I've actually tried to restore to factory setting 6+ times with an assortment of sim cards from Vodafone, Optus, Telstra, Macquarie (Telstra variant), samsung pay keeps loading up as Taiwanese version (Chinese)...
I've recently asked a friend to extract his Samsung Pay & Framework.apk, it still loads Taiwan Samsung pay.
I think it's region locked?
I'm going to try and restore to XSA Firmware, apparently this worked for the S7 guys, whilst retaining Dual Sim functions.
Click to expand...
Click to collapse
Did you try to factory reset from recovery? Vol up + Bixby + power, wait for few seconds it goes into recovery. Put the regional SIM in, then reboot. It will reboot twice and activate SIM specific features (prominently tells you that it's doing so).
Also please post a screenshot of the Settings->Software information screen (Service provide SW ver. is 2nd last row) both before and after you complete the process.
Someone recommended me this solution after I had a similar problem with my UAE S8 and flashing other country firmware no longer works without supporting SIM card. Download Samsung Pay version 2.7.03 and try that.
oplix said:
Someone recommended me this solution after I had a similar problem with my UAE S8 and flashing other country firmware no longer works without supporting SIM card. Download Samsung Pay version 2.7.03 and try that.
Click to expand...
Click to collapse
Worked for me as well !!
oplix said:
Someone recommended me this solution after I had a similar problem with my UAE S8 and flashing other country firmware no longer works without supporting SIM card. Download Samsung Pay version 2.7.03 and try that.
Click to expand...
Click to collapse
What do you mean flashing other country firmware no longer works without supporting SIM card ?
vortexmak said:
What do you mean flashing other country firmware no longer works without supporting SIM card ?
Click to expand...
Click to collapse
Means that it doesn't matter which firmware you flash if you don't have the country's sim card because s8 will default back to factory CSC. Only way to change CSC without root is to flash with the supporting sim card installed.
cooolzzz_guy said:
Since almost all the international S8/S8+s are on the multi CSC ROM, all you need to do is reset your phone (preferably from the recovery menu) and put in the Oz SIM and reboot. All the regional features are activated, and you get Oz SPAY.
Using that method, I am currently using the India SPAY on an Afghanistan S8+ (Dual sim) and Taiwanese S8 and both work with all cards.
Click to expand...
Click to collapse
Just came across this post. Wondering if the same method works with the dual sim version of S7 (G930FD)?
Thanks.
TopGun2000 said:
Just came across this post. Wondering if the same method works with the dual sim version of S7 (G930FD)?
Thanks.
Click to expand...
Click to collapse
Has anyone here got the Australian Samsung Pay app onto the Taiwanese dual-sim model? I purchased an S8+ at $799 (compared to the RRP of $1349) but I don't want to factory reset if I don't have to.
Anyone got spay working? Pkease share what firmware version are you using.
Hello,i'm new at that forum.Few weeks ago i bought s7 (sprint) from ebay and the firmware model is G930PVPU6BRD2 which has bootloader 6 and no other firmware is installing at that phone,otherwise it is bricked (i tried 4 or 5 firmware and root methods but no good result) and if i install correct (G930PVPU6BRD2) software it is working.I live in Georgia and there are 3 mobile operator which provides LTE bands and my phone refuses sim (it says "Invalid Sim").
someone can help me to solve this problem?
P.S. my friend also bought s7 edge (sprint) from ebay and give it to technical,which what i think unlock LTE bans and firmware is still G935PVPU6BRD2 with sprint built in apps but system message is still activation required,but phone works great with calling and LTE.He told me that technical firstly downgrade phone and than upgrade it (he is noob at phones and actually don't know which steps technical done to unlock sim and cann't tell me whole process).
Please help if anyone tried some working method for that problem!
any advice will be appreciated.
here is link of my friend's s7 edge of combination *#0011#:
https:// ibb.co/bzSNaJ
I bought myself an unlocked AT&T s7 edge (SM-G935A) a while ago and recently flashed it with an SM-G935U firmware. I didn't flash the 935A version cuz I thought it wouldn't work here in Malaysia (somewhere in Asia). After flashing it I had no problems using wifi but couldn't make calls even with a SIM card in it. I have tried flashing the 935FD version but couldn't get it to flash with Odin due to errors. I've even tried to buy an unlock code for the 935A version and that still didn't work. Any ideas?
I'm new here so hi.
modem problem
i had the same issue.
tip *#0011#... see if shows up the imei number and SN... look for CERTI FAIL
if true, just flash your stock rom ( what works normally) and then flash the U version without the CP File.