Related
Hi there,
I´ve a Vega and I installed de vegacomb build 7. Discovered that once it was power off it stucks in the vegacomb logo endlesly. I updated to build 8.1 and the same problem came across.
I found a GTab rom and as the tablet has multiple names (mine´s is actually called dvc p10 P10AN class 3G version) I installed it by error.
Now there is no way to plug it to de PC in recovery mode again and it doesn´t start at all, the screen seems to get on, but nothing happens.
The power-back button combination doesn´t work any more. Any suggestion?
Thnx a lot!
make sure the tablet is fully charged and plugged into the
Mains when you try to enter recovery. It should get there in the end.
Please post questions in the general section. This is for development only!
Mods please move this thread.
This sort of happened to me, try this.
Tressy said:
I had similar problem i followed this
Make sure the charger is UNPLUGGED.
2. Hold The power button for 6 seconds and make sure the backlight is off.
3. Now insert the charging cable and the USB cable from the PC to the Vega.
4. Hold the back button for 2 seconds.
5. While still holding the back button ton hold the power for 2 seconds.
6. Then let go of the power button still holding the back button when is hardware wizard
Click to expand...
Click to collapse
Sorry if its not the appropiate section. I posted here because brick mostly happens as a result of a failure of a ROM issue. Move it if you thinks it´s not the place.
I´ve tried B1scu1T method and still nothing.
Regards
In your Windows desktop make sure you're looking at the device manager to ensure you can see if a device is detected. Also make sure you have sound, it helps to know when a deviced is plugged.
Fully charge the Vega.
Make sure the charger is plugged into the Vega
Connect the USB cable from the Vega to a tested USB port directly on the PC (not into a USB hub)
Press and hold back and then press power on the Vega.
Hope it works!
I´ve tried the back-power button combination as I always do, the thing is now the device is not recongnized by de PC. Nothing appears.
Don´t know if anyone has another combination of buttons or solution.
Thanks again, when this is solved we can go back to the enless logo at the start, but now I have this previous problem.
sometimes it doesnt show anything on the screen.
so your Vega will have black screen. follow procedure to put it in recovery mode then execute DEFAULT EXE from Vega website it will open CMD window and tell you that device is not connected or just start installing.
if it says not connected then try again to put it in recovery mode etc till you get install running. It will work AFAIK recovery on Vega + hardware buttons makes it brick proof but i might be wrong there is always first time
Goomy
After millions of tries it finally works!... Now we can go to the problem with the endless logo loop at the start up of the vegacomb 8.1.
Thanks a lot!... and never try a rom from other tablet!
See you in the ROM forum!
B1scu1T said:
This sort of happened to me, try this.
Click to expand...
Click to collapse
Thanks this did the trick for me. Tried quite a few blind alleys
It seems i have bricked a Le Pro 3 x727 trying to booting to a custom Rom. The screen is always off, no info no matters what. I have tried everything but it only vibrates. I have tried the vol +, vol- and power keys but it only vibrates and my PC doesn't recognize anything :/
What can I do? I'm missing something? I'm on Windows 10 BTW...
Thanks in advance!
edgarborras94 said:
It seems i have bricked a Le Pro 3 x727 trying to booting to a custom Rom. The screen is always off, no info no matters what. I have tried everything but it only vibrates. I have tried the vol +, vol- and power keys but it only vibrates and my PC doesn't recognize anything :/
What can I do? I'm missing something? I'm on Windows 10 BTW...
Thanks in advance!
Click to expand...
Click to collapse
Press power button 2 minutes or longer, sometime the phone will come alive I did it couple of times before.
If not work try this tread:
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
What happened what did you flash?
Sent from my LEX727 using xda premium
I have flashed an aboot file i found in this forum. But unfortunately i doesnt show anything in screen and my pc doesnt recognize it in any way...
No flashboot mode, no recovery and no edl mode...
It only vibrates no matter what combination of keys i press
Thanks!!
edgarborras94 said:
I have flashed an aboot file i found in this forum. But unfortunately i doesnt show anything in screen and my pc doesnt recognize it in any way...
No flashboot mode, no recovery and no edl mode...
It only vibrates no matter what combination of keys i press
Thanks!!
Click to expand...
Click to collapse
Volum + and - and power button go in the qfil mode
And go in this thread
https://forum.xda-developers.com/le-pro3/how-to/guide-unbrick-le-pro3-tested-t3622340
venezolano69 said:
Volum + and - and power button go in the qfil mode
And go in this thread
https://forum.xda-developers.com/le-pro3/how-to/guide-unbrick-le-pro3-tested-t3622340
Click to expand...
Click to collapse
Okey, now the phone has a red led steady when is plugged, so it's the first difference between yesterday, I'm charging it and then i will try to enter qfil mode... btw, my pc doesn't recognize my phone in any way... should the qfil show something in the phone screen?
Thank you very much!
edgarborras94 said:
Okey, now the phone has a red led steady when is plugged, so it's the first difference between yesterday, I'm charging it and then i will try to enter qfil mode... btw, my pc doesn't recognize my phone in any way... should the qfil show something in the phone screen?
Thank you very much!
Click to expand...
Click to collapse
You have to install Qualcomm driver to recognize the phone
https://forum.xda-developers.com/le-pro3/help/le-pro3-bricked-fastboot-recovery-t3487259
venezolano69 said:
You have to install Qualcomm driver to recognize the phone
https://forum.xda-developers.com/le-pro3/help/le-pro3-bricked-fastboot-recovery-t3487259
Click to expand...
Click to collapse
:good:
Hi, I'm using Nokia 6 ( TA 1000) mobile with Playstore ( i purchased it local mobile shop and they said it's with Play-store. but i haven't received any update from 2017- April security update.
so i found some ways to manual update (https://forum.xda-developers.com/nokia-6/how-to/nokia-6-official-firmware-mena-region-t3664441) and i followed some steps form Xda forum. finally i got oreo update, but my mobile model change to TA-2025 and sounds/camera quality dropped. ( sound looks like mono speaker)
then i tired to go back to old model using OSTLA_v6.1.2.zip
but unfortunately mobile goes to download mode and now it's not turn on or turn off. (display on until battey low )
"Powered by android - download mode" test only in background
Is there a way to fix this issue ? i didn't found any place to fix i
U must flash desember OTA update firstly
Cek this https://forum.xda-developers.com/nokia-6/how-to/nokia-6-ta-1000-homebrew-stock-android-t3752006
After stuck on recovery u can flash original firmware nougat with OST LA 6.0.4
hawwin88 said:
U must flash desember OTA update firstly
Cek this https://forum.xda-developers.com/nokia-6/how-to/nokia-6-ta-1000-homebrew-stock-android-t3752006
After stuck on recovery u can flash original firmware nougat with OST LA 6.0.4
Click to expand...
Click to collapse
but phone is stuck in the download mode. is there a way to get back to recovery mode ?
Press power switch long?
Mikelsson70 said:
Press power switch long?
Click to expand...
Click to collapse
restarting & once again download mood
Try
- power off phone
- put phone in charger (wait about 10 seconds)
- Press vol+ and power buttons about 10-12s
(now appear death of android)
- Press power button down and then click vol+ once and then don't press any button
swipe cache or flash
try again if not go recovery
if after couple try, recovery still missing. You must flash it.
Mikelsson70 said:
Try
- power off phone
- put phone in charger (wait about 10 seconds)
- Press vol+ and power buttons about 10-12s
(now appear death of android)
- Press power button down and then click vol+ once and then don't press any button
swipe cache or flash
try again if not go recovery
if after couple try, recovery still missing. You must flash it.
Click to expand...
Click to collapse
When i connect charger, then it's automatically power ON and goes to download mood.
so i tired power off phone in charger, but then it's always restart only ( goes to download mood)
Mikelsson70 said:
Try
- power off phone
- put phone in charger (wait about 10 seconds)
- Press vol+ and power buttons about 10-12s
(now appear death of android)
- Press power button down and then click vol+ once and then don't press any button
swipe cache or flash
try again if not go recovery
if after couple try, recovery still missing. You must flash it.
Click to expand...
Click to collapse
is there a way to use any online tool to flash it ?
press and hold three buttons (vol up, down & power) at the same time
maybe you will out from download mode
hawwin88 said:
press and hold three buttons (vol up, down & power) at the same time
maybe you will out from download mode
Click to expand...
Click to collapse
yes, it's work for power off ( display "shout down" in the top left side for the 1st time), but when i plug charger, once again it's goes to download mode.
emmazz said:
When i connect charger, then it's automatically power ON and goes to download mood.
so i tired power off phone in charger, but then it's always restart only ( goes to download mood)
Click to expand...
Click to collapse
edit: It seems OST tool won't work. If we are on 8.1
Try use OST LA and flash stock firmware again. Sorry i never used it, so i can't help more.
If you need EDL cable, but it is ordinary usb cable. Only 2 wires put together when flash.
You go always download mode, so i think you not need.
http://forum.gsmhosting.com/vbb/f805/edl-cable-answered-2192111/
try 1st
https://forum.xda-developers.com/no...ia-8-official-firmware-links-updated-t3678487
( note nokia 8 forum)
or it not working try
try 2nd
https://forum.xda-developers.com/showpost.php?p=75131201&postcount=4
I hope some more things know can help you.
These methods are almost emergency use only.
Mikelsson70 said:
edit: It seems OST tool won't work. If we are on 8.1
Try use OST LA and flash stock firmware again. Sorry i never used it, so i can't help more.
If you need EDL cable, but it is ordinary usb cable. Only 2 wires put together when flash.
You go always download mode, so i think you not need.
http://forum.gsmhosting.com/vbb/f805/edl-cable-answered-2192111/
try 1st
https://forum.xda-developers.com/no...ia-8-official-firmware-links-updated-t3678487
( note nokia 8 forum)
or it not working try
try 2nd
https://forum.xda-developers.com/showpost.php?p=75131201&postcount=4
I hope some more things know can help you.
These methods are almost emergency use only.
Click to expand...
Click to collapse
Thank you so much, i'll try :crying:
emmazz said:
yes, it's work for power off ( display "shout down" in the top left side for the 1st time), but when i plug charger, once again it's goes to download mode.
Click to expand...
Click to collapse
If still goes to download mode, maybe u can try this
Connect ur phone with computer
And open command in OST LA folder
Type this =
fastboot continue
and press enter
hawwin88 said:
If still goes to download mode, maybe u can try this
Connect ur phone with computer
And open command in OST LA folder
Type this =
fastboot continue
and press enter
Click to expand...
Click to collapse
mobile restarting and getting "usb detect" sound in PC continues. it's not stop until unplug
Hey guys, Nokia 6 mobile handover to the small repair shop in the town and, now Mobile is working fine, with the TA-1021 and i have updated to Android 9. (may 1, 2019 Security update.)
but now sounds are very loud and it's very annoying. i don't know what happened. but sound quality dropped to very low. and also Mobile camara quality also like VGA camara.
is there a way to fix this issue ? or restore to the original TA-1000 version. :crying: :crying: :crying:
if you have unlocked bootloader, it much easier just download NOST by hikary, and some stock nougat rom.
just flash and it work again.
My ta-1021 have this couple month ago, stuck on download after downgrade from nougat to oreo.
frnsl3 said:
if you have unlocked bootloader, it much easier just download NOST by hikary, and some stock nougat rom.
just flash and it work again.
My ta-1021 have this couple month ago, stuck on download after downgrade from nougat to oreo.
Click to expand...
Click to collapse
is there a way to check "bootloader unlock" ?
emmazz said:
is there a way to check "bootloader unlock" ?
Click to expand...
Click to collapse
in stock all phone will ship with locked bootloader.
to check just reboot your phone, in "powered by android" display there is a message or not.
if not your phone has locked bootloader.
frnsl3 said:
in stock all phone will ship with locked bootloader.
to check just reboot your phone, in "powered by android" display there is a message or not.
if not your phone has locked bootloader.
Click to expand...
Click to collapse
hmm. only powered by android logo, and then nokia Logo.
is there any tutorials to unclock this bootloader ? my mobile is Nokia 6, TA 1000 ( but current firmware is TA-1021 - android 9 latest update) i want to go back to TA- 1000 or TA 1003 (happy to use android 9 with ta 1000 or ta 1003)
Hoping someone can shed some light. Rushing to root phone again to send back warranty replacement, in my haste my laptop died mid flash and now can only boot in Fastboot and Crashdump Mode.
I am attempting to restore to factory via the MSM tool but cannot for the life of me enter EDL mode.
With phone powered off and pressing the vol up and down keys while plugging into the PC, it only enters Fastboot mode
I have tried to do it with phone off, rebooting from Crashdump mode, from fastboot and it seems that no combination allows me to do so.
I have also tried just vol up and vol down. App loaded at the flash screen, not loaded, etc.
Thanks in advance
quy said:
Hoping someone can shed some light. Rushing to root phone again to send back warranty replacement, in my haste my laptop died mid flash and now can only boot in Fastboot and Crashdump Mode.
I am attempting to restore to factory via the MSM tool but cannot for the life of me enter EDL mode.
With phone powered off and pressing the vol up and down keys while plugging into the PC, it only enters Fastboot mode
I have tried to do it with phone off, rebooting from Crashdump mode, from fastboot and it seems that no combination allows me to do so.
I have also tried just vol up and vol down. App loaded at the flash screen, not loaded, etc.
Thanks in advance
Click to expand...
Click to collapse
What I did when I was in Crash Dump Mode was,
Press and Hold Power Off and Volume Up button and release when the screen goes off. Now your phone is switched off. Now to enter the EDL mode you need to press and hold volume up and volume down buttons at the same time...and then connect the mobile to pc while still holding the buttons. Done. MSM tool will detect your phone.
NOTE : Also keep the Device Manager window open on the PC while u connect the phone to pc and check if it shows up there.
quy said:
Hoping someone can shed some light. Rushing to root phone again to send back warranty replacement, in my haste my laptop died mid flash and now can only boot in Fastboot and Crashdump Mode.
I am attempting to restore to factory via the MSM tool but cannot for the life of me enter EDL mode.
With phone powered off and pressing the vol up and down keys while plugging into the PC, it only enters Fastboot mode
I have tried to do it with phone off, rebooting from Crashdump mode, from fastboot and it seems that no combination allows me to do so.
I have also tried just vol up and vol down. App loaded at the flash screen, not loaded, etc.
Thanks in advance
Click to expand...
Click to collapse
It always seems to take me several tries to get it right. I think if I don't hit the vol +/- keys right at the exact time that's the problem. Just be patient and keep trying. The first time I did it, it took me what seemed forever. Thought maybe my phone was broken.
Sent from my IN2025 using Tapatalk
rmiles7721 said:
It always seems to take me several tries to get it right. I think if I don't hit the vol +/- keys right at the exact time that's the problem. Just be patient and keep trying. The first time I did it, it took me what seemed forever. Thought maybe my phone was broken.
Sent from my IN2025 using Tapatalk
Click to expand...
Click to collapse
I have been doing custom roms since the old win ce devices....and yet you sir have been able to make me feel like an idiot haha. Thanks for this. you had it spot on!! thanks so much
Hello Folks. So i have found myself in this situation as well. MY phone wont go off and keeps restarting to CrashDump Mode. As such can't seem to get into EDL mode inorder to flash. Any tips? I have tried all the above methods nothing seems to work. Is there a different key combination or a fastboot command i can use to achieve EDL? Help a brother i'm going nuts. Device IN2020
HaronM said:
Hello Folks. So i have found myself in this situation as well. MY phone wont go off and keeps restarting to CrashDump Mode. As such can't seem to get into EDL mode inorder to flash. Any tips? I have tried all the above methods nothing seems to work. Is there a different key combination or a fastboot command i can use to achieve EDL? Help a brother i'm going nuts. Device IN2020
Click to expand...
Click to collapse
You just need to keep trying it. Make sure you hit vol+/- at the same time and hold for a few seconds, plug in the USB cable, then let off the vol keys. It's difficult to do and get right with two hands. Recently did it again as I wanted to upgrade to the 11 beta from a clean system. Seems like it took me forever to get it this time but eventually I did.
Use usb 2.0 port.
After using 2.0 instead of 3.0 and the phone connected stable for a while (after many tries)
able to finish the msm operation successful ..
But phone not booting .. getting black screen after 1+ logo
at this point I thought to clear cache but My phone is locked I cannot use any recovery .. I cannot even go into oneplu recovery LOL .. It seems like I am doomed
For me personally I could only get it to work on USB2.0 ports. On USB3.0 it just puts me back into fastboot mode or when it does go into EDL MSM tool just fails with a communication error immediately.
I kinda bricked mine as well messing around with GSI ROM's and flashing too hastily and to the wrong partition lol.
It has always worked for me with USB 2.0 port and non oneplus cable.
originable cable would not work for me on usb 3 or USB 2 port, but 3rd party cable start immediately with USB 2 port.
I've had the issue where EDL mode works..... for a few seconds, then the phone reboots.
Very frustrating!
The MSM Download Tool does spot the phone, but since the phone seems to reboot, I don't have enough time to do anything!
Any ideas why this is happening?
OneOfThePetes said:
I've had the issue where EDL mode works..... for a few seconds, then the phone reboots.
Very frustrating!
The MSM Download Tool does spot the phone, but since the phone seems to reboot, I don't have enough time to do anything!
Any ideas why this is happening?
Click to expand...
Click to collapse
You need to already hit start on msmtool BEFORE plugging in phone
1- start MSM tool (prepare the settings and choose the right oos)
2-keep the cable connected to one end (I prefere to keep it connected from the phone side first)
3-keep holding volume up/down for 3-4 sec and connect the other end of the cable to your PC
4-your device will be connected directly stop holding volume up/down and in msm tool press start wait for ≈300 sec
5-now your device should work as it was before
OneOfThePetes said:
I've had the issue where EDL mode works..... for a few seconds, then the phone reboots.
Very frustrating!
The MSM Download Tool does spot the phone, but since the phone seems to reboot, I don't have enough time to do anything!
Any ideas why this is happening?
Click to expand...
Click to collapse
After rebooting my pc, and fiddling with drivers, I got it all sorted finally.
Thanks for your help, folks.
Niranjan Bapat said:
What I did when I was in Crash Dump Mode was,
Press and Hold Power Off and Volume Up button and release when the screen goes off. Now your phone is switched off. Now to enter the EDL mode you need to press and hold volume up and volume down buttons at the same time...and then connect the mobile to pc while still holding the buttons. Done. MSM tool will detect your phone.
NOTE : Also keep the Device Manager window open on the PC while u connect the phone to pc and check if it shows up there.
Click to expand...
Click to collapse
This is a royal pita! I remember when it used to be fun....
Anyway, I've been trying every trick in the book, and then some, but shiznit just isn't going right! The holding of the up and down buttons would be easier if this was the pixel, but it is a tad hard to not mistakenly hit the power button on the other side.
The device manager shows the Qualcomm QDLoader and the msm Downloader is showing the infamous waiting for device... I've been at it for 8 straight hours and if there was a local OnePlus store that sold the international version of the OP8P, that's where I would be heading in a few hours.... It's really frustrating to say the least.
Anyway, when I'm in the bootloader, the device manager shows the Android phone, so I'm thinking that maybe I am in the edl mode when the Qualcomm port shows up, but like I said, the msm is waiting....
tried everything and it is constantly booting into bootloader. I even tried an adjusted fastboot script to boot into EDL but it still boots into bootloader. I have booted into EDL before on a OnePlus 7T, and I have tried multiple times by pressing the OnePlus 8 pro volume buttons at the same time, but always bootloader. Just to check, I tried doing it on my OP 7T again and it worked perfectly fine. Help????
I have had to flash stock 4 times because I land in crash dump mode and it has always been a tricky situation to get into edl.
What worked for me 100% of the time was following the steps in the youtube guide below.
From 2:30 onwards
Hope it helps
I had the same issues, but fixed once read comments as per above. Let me summarize what I did:
1. installed driver Qualcomm HS-USB QDLoader 9008 (I'm using Windows 10) - driver in a cab file should be unpacked using command expand (with proper switches) to preserve folders.
2. launched MSM DT and had it configured and then pressed Verify\Start, as EDL is available only for very short time - 2-3 secs with screen turned off.
3. as my phone was stuck in booting loop I was just keeping presses Vol+/- waiting for EDL to be entered, MDM will find the phone and start uploading data.
Just don't give up trying.
quy said:
Hoping someone can shed some light. Rushing to root phone again to send back warranty replacement, in my haste my laptop died mid flash and now can only boot in Fastboot and Crashdump Mode.
I am attempting to restore to factory via the MSM tool but cannot for the life of me enter EDL mode.
With phone powered off and pressing the vol up and down keys while plugging into the PC, it only enters Fastboot mode
I have tried to do it with phone off, rebooting from Crashdump mode, from fastboot and it seems that no combination allows me to do so.
I have also tried just vol up and vol down. App loaded at the flash screen, not loaded, etc.
Thanks in advance
Click to expand...
Click to collapse
Try different ports. My usb 3 port would force it into fastboot but usb 2 was fine.
What to do if the device doesn't have any usb 2.0 port?
I bricked it and adb wont dectect it on adb, i tried to flash the magisx rom on it and then it just didnt make it past the boot screen and gives me the orange state error, ive tried everything but its still not dectected by the adb thingie
just use the preloader, get mtk-client and then plug it in with power off. Sometime you hold volume up/down same time.
jphilpot7 said:
just use the preloader, get mtk-client and then plug it in with power off. Sometime you hold volume up/down same time.
Click to expand...
Click to collapse
How do i get the preloader?
WalterHartwellWhiteSr said:
How do i get the preloader?
Click to expand...
Click to collapse
its just become a paperweight now, tried fixing it myself and it broke. sad
WalterHartwellWhiteSr said:
How do i get the preloader?
Click to expand...
Click to collapse
Get the mtk-client from GitHub, turn it off, sometimes you hold just the volume buttons and sometimes just plugging it in. The preloader only works when it is off.
jphilpot7 said:
Get the mtk-client from GitHub, turn it off, sometimes you hold just the volume buttons and sometimes just plugging it in. The preloader only works when it is off.
Click to expand...
Click to collapse
it died and it turned into a paperweight and i cant turn it back on and i charged it for a while
You have to get the preloader to start. Also it is very touchy as far as how you get to it. You should at least get a error when you try mtk client and we can worth threw that.
I just bricked my kid's old one, but finally reflashed it. sp flash hands on the preloader part of the "shipping" image I found, but the newer "100003561_12-17-2020_Firmware" flashed & I got it running again. seems like it's preventing the downgrade. *sigh*
my biggest issue was getting the preloader drivers installed. finally found this file "Windows 10 MTK VCOM USB Preloader Drivers" to work on this hand build 2016 PC running a ryzen 1600x (LoL total dino) running Windows 11. found a youtube video, (sorry if this links not allowed but it helped me, please remove if this violates any rules)
but I didn't actually have to remove the battery ever. just has to let it set about 10ish (try counting to 30? LoL) seconds before connecting. basically...
get drivers installed
get stock rom downloaded & extracted
get sp flash installed
get sp flash ready (*open, *load generic d-a bin file, *load the scatter from the stock image)
then while holding vol-, connecting the usb-c cable from tablet to PC
sp flash then starts doing its magic, ends with a yellow bar, & a big @$$ green check mark
then I got back to this (LoL top secret) Chinese menu, vol- to last item, hit PWR to select (reboot cellphone) & then watch this onn. logo for what feels like days as it comes back up wiped clean as a baby's bottom
hope this helps