Database Users

[Q] Bricked lgp700 after flashing cm 11.0

Hello,
I am very new to rooting etc. I rooted my phone a few days ago, unlocked bootloader and tried to flash cm11.0 with rom manager (cwmg) following this link:
http://forum.xda-developers.com/showthread.php?t=2521239
Unfortunately I didn´t understand the instructions well, so after wiping caches, instead of doing a full format I did a user data etc format (which i now think was a factory reset). Tried flashing, didn´t succeed.
Anyway, when I try to switch it on I only get the lg logo and then the batery charging thingy When I try to go to recovery mode with volume up power and menu button, my phone goes on a loop of lg and cyanomod logos untill infinity ( Have to take off the battery). Tried to use heimdall (as i have a mac) to flash kdz back to it, but phone was not recognized. On my pc tried the same, but again phone not seen. I can see it on my computer as an unrecognized external usb but cannot explore. Any ideas on what to do??
thanks in advance

franky.frangi said:
Hello,
I am very new to rooting etc. I rooted my phone a few days ago, unlocked bootloader and tried to flash cm11.0 with rom manager (cwmg) following this link:
http://forum.xda-developers.com/showthread.php?t=2521239
Unfortunately I didn´t understand the instructions well, so after wiping caches, instead of doing a full format I did a user data etc format (which i now think was a factory reset). Tried flashing, didn´t succeed.
Anyway, when I try to switch it on I only get the lg logo and then the batery charging thingy When I try to go to recovery mode with volume up power and menu button, my phone goes on a loop of lg and cyanomod logos untill infinity ( Have to take off the battery). Tried to use heimdall (as i have a mac) to flash kdz back to it, but phone was not recognized. On my pc tried the same, but again phone not seen. I can see it on my computer as an unrecognized external usb but cannot explore. Any ideas on what to do??
thanks in advance
Click to expand...
Click to collapse
power off your device.
long press
1) "vol -"
2) home button
3) power button
for some second
are you able to enter in recovery?

lferlito said:
power off your device.
long press
1) "vol -"
2) home button
3) power button
for some second
are you able to enter in recovery?
Click to expand...
Click to collapse
No, it goes into logos loop.

franky.frangi said:
No, it goes into logos loop.
Click to expand...
Click to collapse
i don't know, man
but for the future, before installing a custom rom
remember to install a recovery
it's very important
hope someone better than me will help you
:fingers-crossed:

lferlito said:
i don't know, man
but for the future, before installing a custom rom
remember to install a recovery
it's very important
hope someone better than me will help you
:fingers-crossed:
Click to expand...
Click to collapse
But I did, throught clockworkmod (first thing I did) ....and also did a nandroid backup...just don´t know how to access them...

franky.frangi said:
But I did, throught clockworkmod (first thing I did) ....and also did a nandroid backup...just don´t know how to access them...
Click to expand...
Click to collapse
on my L5, i long press those 3 buttons until LG logo boot appears..
i wait some second and it appears the CWM reco
i don't know if there are other ways to enter in recovery mode..

yeah me neither.mine used to do the same before the flashing.thanks thought.lets see if someone has another idea...

franky.frangi said:
yeah me neither.mine used to do the same before the flashing.thanks thought.lets see if someone has another idea...
Click to expand...
Click to collapse
As soon as you plug your USB into your phone, hold down the volume up (+) button and the power button and release them after holding them down for about 2 to 3 seconds. Then, install the USB driver for your phone with the LG Mobile Support Tool. Secondly, download and install the LG PC Suite program and last but not least, download the KDZ program. Install the correct firmware for your phone and make sure you select 'EMERGENCY' from the list on the top right of the KDZ program. Select your downloaded firmware file and start the program. If everything worked out, the program should crash after it's done and your phone should reboot. Disconnect your phone from the computer if it doesn't reboot and try to boot it up again.
You can find all of these programs along with tutorials on how they work by searching on either XDA or Google.

did forcing recovery/download work ?
TahaX said:
As soon as you plug your USB into your phone, hold down the volume up (+) button and the power button and release them after holding them down for about 2 to 3 seconds. Then, install the USB driver for your phone with the LG Mobile Support Tool. Secondly, download and install the LG PC Suite program and last but not least, download the KDZ program. Install the correct firmware for your phone and make sure you select 'EMERGENCY' from the list on the top right of the KDZ program. Select your downloaded firmware file and start the program. If everything worked out, the program should crash after it's done and your phone should reboot. Disconnect your phone from the computer if it doesn't reboot and try to boot it up again.
You can find all of these programs along with tutorials on how they work by searching on either XDA or Google.
Click to expand...
Click to collapse
the phone off usb in and buttons did it work ?

Actually didn´t work,I have drivers already, LG PC Suite program , and KDZ. Problem is my phone is not detected by pc, so kdz unzips and then says : phone not detected, with or without battery...doesn´t go into recovery mode with buttons, just lg and cyanomod logos...
I don`t know if this can b fixed.....How can you flash anything if it´s not detected....
I´ll give it a try again tomorrow, without trying to enter recovery mode....but tried lots of buttons combinations and wasn´t working

Press these buttons
volume +
,volume -
home button
together with the power button
release all buttons except power button when you get a vibration
release the power button immediately after the lg logo has appered
this should let you get in the recovery menu
FULL STEP BY STEP GUIDE
found http://forum.xda-developers.com/showthread.php?t=2486512

IGGYVIP said:
Press these buttons
volume +
,volume -
home button
together with the power button
release all buttons except power button when you get a vibration
release the power button immediately after the lg logo has appered
this should let you get in the recovery menu
FULL STEP BY STEP GUIDE
found http://forum.xda-developers.com/showthread.php?t=2486512
Click to expand...
Click to collapse
Finally!! This worked....I can get in the recovery menu!!!
Before I do anything I´ll really think about what rom I want to use )
Thanks lot everyone...hope it gives me no more issues.

franky.frangi said:
Finally!! This worked....I can get in the recovery menu!!!
Before I do anything I´ll really think about what rom I want to use )
Thanks lot everyone...hope it gives me no more issues.
Click to expand...
Click to collapse
happy flashing

[Q] Please can someone help I killed my yotaphone 2

Hello to all here at xda im a new member and im hoping someone can help me,
I recently bought a yotaphone 2 from tinydeals in china and its model
P05-Yota which I think is china model YD-205 or 206
I wanted to upgrade the firmware to the latest firmware and I think I made two big mistakes.
First when I downloaded the yotaflasher software for windows I chose the eu firmware on option 2 and clicked to download it.also I dont think I put usb debugging on my phone.i put my phone into diwnloading mode and connected the phone to my pc.my pc recognised the phone and I clicked on option 1 in yotaflasher to flash mobile.
The flash process started but failed on most of the things it was supposes to get access to, my phone reatarted and now its on constant boot loop which shows the android logo.i can boot phone back into downloading mode but nothink else
I have read that as my phone is in boot loop and can still boot into downloading mode its soft bricked and not hard bricked so im guessing thats good news.
This is my own fault and im not very experienced in all this flashing and I fing yotaflasher hard to understand compared to odin ive used on samsung phones before
Please can anyone help a complete novice to revive his mobile
I would be greatful for any help and instructions and dont know if im allowed to do this on this site so I appologise to moderators if im not, but anyone that can help me get my phone working again I will transfer £20 to their paypal account as I would appreciate this help alot
Im sorry for being a noob and hope to hear from someone soon
Thx
Simon h

Sorry for my very, very bad english.
Try to reboot your phone in recovery mode.
Press power button for a long time (20 - 30 seconds or more) and, as soon as the screen turn off, press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, choose wipe data and factory reset.
Try several times if that does not work at once.
I made a big mistaske too and I solved the problem but with several attemps.
Good luck !

I appreciate your help
cheynei said:
Sorry for my very, very bad english.
Try to reboot your phone in recovery mode.
Press power button for a long time (20 - 30 seconds or more) and, as soon as the screen turn off, press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, choose wipe data and factory reset.
Try several times if that does not work at once.
I made a big mistaske too and I solved the problem but with several attemps.
y
Good luck !
Click to expand...
Click to collapse
Just wanted to saythanykyou and appreciate your reply and as soon as I get home I will try and boot into recovery and see how that goes.will update on progress
Again thankyou

simon121simon said:
Just wanted to saythanykyou and appreciate your reply and as soon as I get home I will try and boot into recovery and see how that goes.will update on progress
Again thankyou
Click to expand...
Click to collapse
No problem, I think it's the only solution... but you will loose all your data (I bought my yotaphone from tinydeals too and I killed it too)...
:fingers-crossed:

queation about yotaflasher
cheynei said:
No problem, I think it's the only solution... but you will loose all your data (I aboutbought my yotaphone from tinydeals too and I killed it too)...
:fingers-crossed:
Click to expand...
Click to collapse
Just a quick question, yotaflasher is a software im not familiar with and im not sure if im using it right.
Do I start yotaflasher and then type 2 and enter tochoose region.then type the number for the firmware I want and press enter.then when its finished downloading it seems ro freeze and I cant type any key to start flash so I have to exit software then restart it.
Do I then just type 1 and enter to start flashing phone then thats it or do you have to type proper commands into this software ro get it to work as im not sure if im using it right
I will be home in couple of hrs to test out what you told me
Thx

simon121simon said:
Just a quick question, yotaflasher is a software im not familiar with and im not sure if im using it right.
Do I start yotaflasher and then type 2 and enter tochoose region.then type the number for the firmware I want and press enter.then when its finished downloading it seems ro freeze and I cant type any key to start flash so I have to exit software then restart it.
Do I then just type 1 and enter to start flashing phone then thats it or do you have to type proper commands into this software ro get it to work as im not sure if im using it right
I will be home in couple of hrs to test out what you told me
Thx
Click to expand...
Click to collapse
Sorry again for my english...
1. without any software, reset your phone : turn off your phone (or, if it's not possible, press power button for a long time :20 - 30 seconds or more - and, as soon as the screen turn off) --> press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, choose "wipe data and factory reset" and wait...
2. After the reboot, put usb debugging on your phone
3 . install yotaflasher (so you also have the drivers on your computer).
4. put your phone on download mode : turn off your phone - then, press and hold the Volume down + Power button simultaneously for about 10 seconds
5. open yotaflasher on your computer and connect your phone (wich is on download mode)
6. chose the last EU firmware (option 2) and download it - after, click on option 1 and flash your mobile. Wait the necessary time without touch anything and, after maybe 10 ou 15 minutes, your phone will reboot.
We have the same phone from Tinydeals and I'm now on lolipop (after the flash).
Good luck !

usb debugging is the problem
cheynei said:
Sorry again for my english...
1. without any software, reset your phone : turn off your phone (or, if it's not possible, press power button for a long time :20 - 30 seconds or more - and, as soon as the screen turn off) --> press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, choose "wipe data and factory reset" and wait...
2. After the reboot, put usb debugging on your phone
3 . install yotaflasher (so you also have the drivers on your computer).
4. put your phone on download mode : turn off your phone - then, press and hold the Volume down + Power button simultaneously for about 10 seconds
5. open yotaflasher on your computer and connect your phone (wich is on download mode)
6. chose the last EU firmware (option 2) and download it - after, click on option 1 and flash your mobile. Wait the necessary time without touch anything and, after maybe 10 ou 15 minutes, your phone will reboot.
We have the same phone from Tinydeals and I'm now on lolipop (after the flash).
Good luck !
Click to expand...
Click to collapse
Hi there mate thx for the step by step guide but I think I know what the problem is.i originally didnt put it into usb debugging mode when I originally tried to flash the firmware.now as the mobile is stuck in boot loop and cant load up as normal I cant switch on usb debugging.is there a way through fastboot or that adb program.im just learning about these programs to flash mobiles with but if there is no way to enable usb debugging through any software I fear im screwed

simon121simon said:
Hi there mate thx for the step by step guide but I think I know what the problem is.i originally didnt put it into usb debugging mode when I originally tried to flash the firmware.now as the mobile is stuck in boot loop and cant load up as normal I cant switch on usb debugging.is there a way through fastboot or that adb program.im just learning about these programs to flash mobiles with but if there is no way to enable usb debugging through any software I fear im screwed
Click to expand...
Click to collapse
Yes, I know, don't worry, I bug my phone too - it's why you have, first, to reset your phone... try to put it on recovery mode, it's the only solution (I think).
--> Press the power button for a long time (20 - 30 seconds or more) and, as soon as the screen turn off, press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, you will see a menu : choose "wipe data and factory reset".
Try several times if that does not work at once.

Help bricked my p8 lite

i tried rooting my phone huawei p8 lite but got stuck at installing super su now i cannot start my device ..i cannot boot into flash mode or recovery ..i need help ...it wont even charge

pepeline said:
i tried rooting my phone huawei p8 lite but got stuck at installing super su now i cannot start my device ..i cannot boot into flash mode or recovery ..i need help ...it wont even charge
Click to expand...
Click to collapse
What's your build number what version of supersu did you try to flash?
Shutdown your device, put your current build onto 'dload' folder in the sdcard and press the following key combo: POWER, VOL-UP & VOL-DOWN, it should enable automatic update process

amageek said:
What's your build number what version of supersu did you try to flash?
Shutdown your device, put your current build onto 'dload' folder in the sdcard and press the following key combo: POWER, VOL-UP & VOL-DOWN, it should enable automatic update process
Click to expand...
Click to collapse
My phone restarts right at the logo when i press power vol up and vol down

pepeline said:
My phone restarts right at the logo when i press power vol up and vol down
Click to expand...
Click to collapse
Shut it down amd press those 3 keys combo.. upon seeing Huawei Logo and vibration, release the Power key while holding the other 2... That ought to do it

Man, your phone is badly bricked. If you don't have at least access to fastboot, then you're screwed.

Good for me to I have the same problem. I was trying to get to stock ( I have made it several times), but the last time was a fail... The whole process of sending firmware was ok. then a reboot and brick.
Now the huawei screen and the short vibration appears and shutdown.
I was trying everything.
In device manager the phone is displayed as mobile devices \ volume f:\ (drive letter)
in connected devices the phone is detected as
hi6210sft
Phone is not detected in fastboot or ADB.

I met this problem yesterday(I hope the identical ). Because I have two booting animations, one from Vodafone, I guess I shutdown early during installation. It just froze. Then it didn't boot and stock recovery didn't help
My solution needs some recovery software like twrp. Press three buttons at the same time until twrp mode. Copy zip file for SuperSU to phone or sdcard, then flash it. After that my phone works again.
You mentioned that you cannot start recovery. Try more. After installing twrp, starting it is quite annoying. Sometimes it just doesn't start or stock recovery starts. An alternative way is to go to whatever mode, and try adb or fast boot to reboot to recovery. Pressing button requires techniques which j don't have

I can't enter TWRP non combination is working for me. Installing firmware using dload from sd card also.

okay if non of these worked you can try flashing the whole update.app file by fastboot..
tools you will need
1- download the official huawei firmware from the official site
2- download Huawei Update Extractor
3- download minimal adb and fastboot
check the unbricking chapter of this thread
Note: to get in fastboot make sure you connected your phone to computer and press the vol down and power down buttons.. if none of these worked your phone is hard bricked .-. .. try opening the phone and reconnecting the battery worked with someone
if you need any help just pm me or replay on this thread hope that help you

Ok thx. I have already opened the phone to reconnect the battery
And then I was trying the combinations;
Battery connected vol- +power - Huawei logo and vibration and shutdown, no fastboot
Battery disconnected, vol-+power and connecting cable to phone - the same
Battery disconnected combination vol + vol - + ppwer, with sd card dload, the same
Battery connected combination vol + vol - power, sd card dload, the same
Any other suggestions?
The phone is recognized in Windows in device manager as mobile device as volume with a letter, I cant change the drivers to the right ones. I can't enter the storage it's unrecognized format.

Any other suggestions?

mercom said:
Any other suggestions?
Click to expand...
Click to collapse
it is easy to suggest others.. I too advised you.. but today i am facing the same problem...
what I tried:
Reinstalling the same ROM using dload method
Upgrading to other ROM (using both dload and flashing 4 image method)
Downgrading
Restoring from the backup
At one point, the phone booted up all well except the Wifi Module... So I flashed another ROM and stuck again...

the worst thing that I don't have any connection to fastboot Each firmware installation method fails

mercom said:
the worst thing that I don't have any connection to fastboot Each firmware installation method fails
Click to expand...
Click to collapse
yes, mine too... or I could say flashing succeeds but there's some problem with the boot partition... will get my phone today from the Customer Care and try again (if they can't repair).
you can try removing the back cover and unplugging the battery... that is one of the few things I will do today as I get my phone back..

mercom said:
the worst thing that I don't have any connection to fastboot Each firmware installation method fails
Click to expand...
Click to collapse
ok made it back.. just flashed the boot.img from b594 (the one I was using when my mobile got bricked)... somehow made it back. But now I am having a problem with the battery. It doesn't charge when the device is switched on, only when the device is switched off... will see for few days, if there's problem will take it back to service centre again

I have already removed back cover and was trying to reconnect the battery to do clear run. But the only thing is discovered in windows is a driver for storage and I can't change the driver to ADB or FASTBOOT
Now I have connected phone w PC on adb devices I see only emulator-5554 device. In Device manager I see the storage as a Mobile Device.
Nope it was Bluestacks

mercom said:
I have already removed back cover and was trying to reconnect the battery to do clear run. But the only thing is discovered in windows is a driver for storage and I can't change the driver to ADB or FASTBOOT
Now I have connected phone w PC on adb devices I see only emulator-5554 device. In Device manager I see the storage as a Mobile Device.
Nope it was Bluestacks
Click to expand...
Click to collapse
Switch off your device and then connect it to PC but just hold the volume- key.. that should get you in fastboot mode... I did that and then flashed the boot.img of the current ROM. This should boot it up...

Nope it doesn't work I was trying it already

LG G2 Boot security error after trying to flash SuperSu after going to LineageOS 14.1

I've been using Cyanogenmod 13.1 (rooted) and I decided to flash a ROM with Nougat. I flashed lineage-14.1-20170320-nightly-d802-signed and open_gapps-arm-7.1-mini-20170325 and everything worked fine except I didn't have SuperSU. I tried flashing SuperSU-v2.79-201612051815 and when I tried to boot into system I got this screen (with the LG logo below) http://i.imgur.com/O7vOtab.png I tried many methods like this https://forum.xda-developers.com/showthread.php?t=2582142 and this https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404 to no avail. In Linux when I used the ls /dev/sd* command in the terminal the phone wouldn't show up and later in Windows I got the PC to recognize the phone as Marshall USB Composite Device 9006 http://i.imgur.com/a5WHV9P.png and in Disk Management the phone partition shows up un-initialised http://i.imgur.com/XaVKIu7.png . Help I don't know what to do now. Tell me if I should provide more information.

I had the exact same problem. Then i found a solution. Just dont flash the normal Supersu, you need to flash the Supersu BUMPED file. Just go in recovery, press 10 sec the power button to be sure the phone is off, then hold volume down and power button until the logo appears, then release and press again (fast) then choose yes, yes. Just flash the Bumped and if recovery asks to do root choose NO.
The Bumped which worked for me
http://www108.zippyshare.com/v/ZjxTLdkp/file.html
I hope i could help

RelaxBuddy said:
I had the exact same problem. Then i found a solution. Just dont flash the normal Supersu, you need to flash the Supersu BUMPED file. Just go in recovery, press 10 sec the power button to be sure the phone is off, then hold volume down and power button until the logo appears, then release and press again (fast) then choose yes, yes. Just flash the Bumped and if recovery asks to do root choose NO.
The Bumped which worked for me
I hope i could help
Click to expand...
Click to collapse
Well I had no luck getting into recovery before but that was before I took apart my phone because I couldn't turn it off (it keeped bootlooping) but I will try, thanks

Bluellama said:
Well I had no luck getting into recovery before but that was before I took apart my phone because I couldn't turn it off (it keeped bootlooping) but I will try, thanks
Click to expand...
Click to collapse
Yeah Bad same Problem, turned off and it went on, then again bootloop. But if you press the power button long enough then its completely off. In cyanogen mod i had Problem that i couldnt get into recovery with power button+volume down.
So you should flash kdz, get oneclickroot for LG g2, then autorec lollipop to get recovery. Then flash Rom + gapps + The bumped file.
If you dont know how to flash kdz, you can ask here. I will help
Good luck

RelaxBuddy said:
Yeah Bad same Problem, turned off and it went on, then again bootloop. But if you press the power button long enough then its completely off. In cyanogen mod i had Problem that i couldnt get into recovery with power button+volume down.
So you should flash kdz, get oneclickroot for LG g2, then autorec lollipop to get recovery. Then flash Rom + gapps + The bumped file.
If you dont know how to flash kdz, you can ask here. I will help
Good luck
Click to expand...
Click to collapse
Previously I couldn't go into download mode but I will try now since I managed to turn off the smartphone completely. Before it would just stay on with a black screen.

Bluellama said:
Previously I couldn't go into download mode but I will try now since I managed to turn off the smartphone completely. Before it would just stay on with a black screen.
Click to expand...
Click to collapse
Yeah Ok. When I wanted to turn It off, I just pressed the power button until the screen went black and the logo came again but after 2-3 sec the screen went black again, then it was off (just hold power button for 10sec)
Try that when your phone keeps restarting

RelaxBuddy said:
Yeah Ok. When I wanted to turn It off, I just pressed the power button until the screen went black and the logo came again but after 2-3 sec the screen went black again, then it was off (just hold power button for 10sec)
Try that when your phone keeps restarting
Click to expand...
Click to collapse
KDZ flashing gets stuck at 60% (Verifying phone connection) http://i.imgur.com/AAHKqcd.png
Should I just let it sit through its emotional problems?

Bluellama said:
KDZ flashing gets stuck at 60% (Verifying phone connection) http://i.imgur.com/AAHKqcd.png
Should I just let it sit through its emotional problems?
Click to expand...
Click to collapse
Get the lg mobile support tool, install it. Then open and connect your phone via download mode, it will find the phone and download the kdz for it. That should work.
If it doesn't install automatically, click on additional options then click on set upgrade error back, or something like that.
Before all that install the driver from
http://www.lg.com/de/support/service-mobil-telefon/lg-G2
Then you can start with lg mobile support tool

RelaxBuddy said:
Get the lg mobile support tool, install it. Then open and connect your phone via download mode, it will find the phone and download the kdz for it. That should work.
If it doesn't install automatically, click on additional options then click on set upgrade error back, or something like that.
Before all that install the driver from
http://www.lg.com/de/support/service-mobil-telefon/lg-G2
Then you can start with lg mobile support tool
Click to expand...
Click to collapse
Ok I managed to flash a stock rom and the problem was... usb 3.0. I connected the phone to usb 2 and it worked flawlessly. If anybody has a problem like I did you can message me

Nokia 6 Oreo Beta - No recovery!

Ever since i flashed my Nokia 6 with the Oreo Beta update i no longer have access to the recovery menu.
I want to update to Oreo Final, but how can i do that now?
My Nokia is a TA-1000 model, but recognized as TA-1025.

IndigoHD said:
Ever since i flashed my Nokia 6 with the Oreo Beta update i no longer have access to the recovery menu.
I want to update to Oreo Final, but how can i do that now?
My Nokia is a TA-1000 model, but recognized as TA-1025.
Click to expand...
Click to collapse
There is 2 way to access recovery menu:
Normal Way:
Step 1) Turn the power off.
Step 2) Hold and Press Volume up + Power Button for about 10 second and release
Step 3) If you see Nokia logo it means failed repeat step 2
Step 4) If you see no command Android logo it means success
Step 5) In no command Android logo Press Volume up + Power Button + Home Button(Center One)
Step 6) You will see recovery menu
Developer Way:
Step 1) In the System->About Phone Tap Build Number Multiple Time to enable developer mode
Step 2) In Developer options enable usb debugging
Step 3) Connect your phone to computer using usb and Allow the access.
Step 4) Download sdk tools from developer.android.com
Step 5) Open adb by cmd and type "adb devices" to detect your phone
Step 6) Then type "adb reboot recovery" to force your phone to reboot and open recovery
Step 7) You should get no command Android logo
Step 8) In no command Android logo Press Volume up + Power Button + Home Button(Center One)
Step 9) You will see recovery menu

IndigoHD said:
Ever since i flashed my Nokia 6 with the Oreo Beta update i no longer have access to the recovery menu.
I want to update to Oreo Final, but how can i do that now?
My Nokia is a TA-1000 model, but recognized as TA-1025.
Click to expand...
Click to collapse
Reflash the mena firmware and wait if you receive otas. If not, you could flash the zip for final oreo. However, I think there's not the link for ta-1025 yet.

Gonz19 said:
Reflash the mena firmware and wait if you receive otas. If not, you could flash the zip for final oreo. However, I think there's not the link for ta-1025 yet.
Click to expand...
Click to collapse
Every zip work on TA-1025/and MENA firmware
Because, internally mena firmware is also TA-1025 and all OTA zips are made and targeted to TA-1025 varient only
So you can even flash OREO FINAL VERSION ALSO
Hit thanks button if you find this useful
Happy flashing

Tried flashing Oreo Final after finding the recovery, now my phone is broken.
Flashing didnt finish and it would no longer boot.
Tried restoring to an older firmware with OST LA, now it just flickers all the time.
Sometimes i see the recovery screen, but then it flickers off again.
Cant do anything anymore. Its broken.

IndigoHD said:
Tried flashing Oreo Final after finding the recovery, now my phone is broken.
Flashing didnt finish and it would no longer boot.
Tried restoring to an older firmware with OST LA, now it just flickers all the time.
Sometimes i see the recovery screen, but then it flickers off again.
Cant do anything anymore. Its broken.
Click to expand...
Click to collapse
Hey dont be sad , we are here to assist you
Try installing OTA manually
when u see the recovery menu, move to the OTA folder and install
Install till January, and then try the OTA of OFFICIAL OREO
this might work, you need to have patience and quick to install the OTA
if I would be there with you, I would love to help you

sltushar said:
Hey dont be sad , we are here to assist you
Try installing OTA manually
when u see the recovery menu, move to the OTA folder and install
Install till January, and then try the OTA of OFFICIAL OREO
this might work, you need to have patience and quick to install the OTA
if I would be there with you, I would love to help you
Click to expand...
Click to collapse
Tried it. Phone just keeps flickering. No longer reacts to anything i do and i cant use the recovery at all. Most of the time the screen is black then it suddenly flashes the recovery for a second.
Cant input any button commands and cant chose anything there.

IndigoHD said:
Tried it. Phone just keeps flickering. No longer reacts to anything i do and i cant use the recovery at all. Most of the time the screen is black then it suddenly flashes the recovery for a second.
Cant input any button commands and cant chose anything there.
Click to expand...
Click to collapse
Can you do one thing,
Its okay it flickers
Try this
When you think you are in recovery mode but still cant see
Then
Just press volume down 4 time(not so quickly, you should know that you pressed it 4 times)
Then click power button
Click one time volume down button
Then again power button
After 20 second press power button
Wait for to reboot the device, if it doesn't
Try force rebooting
Hope this work:fingers-crossed:

sltushar said:
Can you do one thing,
Its okay it flickers
Try this
When you think you are in recovery mode but still cant see
Then
Just press volume down 4 time(not so quickly, you should know that you pressed it 4 times)
Then click power button
Click one time volume down button
Then again power button
After 20 second press power button
Wait for to reboot the device, if it doesn't
Try force rebooting
Hope this work:fingers-crossed:
Click to expand...
Click to collapse
Doesnt work. Forcing a reboot doesnt work either.
Soft reboot works, but i cant get into download mode this way.

IndigoHD said:
Doesnt work. Forcing a reboot doesnt work either.
Soft reboot works, but i cant get into download mode this way.
Click to expand...
Click to collapse
These steps are for hard reset not for download mode
Well i have one solution for you, but its lil expensive
I have firmware, which can be installed through infinity CM2 dongle
This dongle can upgrade, downgrade and do much things on Nokia devices
It costs 70 US dollar
This can only work for you, cause Nokia care will replace your motherboard, they wont repair it, because even they don't know how to deal with it
So if you can buy this dongle then you can flash it else wait for OFFICIAL OREO firmware to be come soon

sltushar said:
These steps are for hard reset not for download mode
Well i have one solution for you, but its lil expensive
I have firmware, which can be installed through infinity CM2 dongle
This dongle can upgrade, downgrade and do much things on Nokia devices
It costs 70 US dollar
This can only work for you, cause Nokia care will replace your motherboard, they wont repair it, because even they don't know how to deal with it
So if you can buy this dongle then you can flash it else wait for OFFICIAL OREO firmware to be come soon
Click to expand...
Click to collapse
Thanks everyone for all your help and to you sltushar, especially!
I guess i will let it discharge for now and hope i can enter into download mode after that.
For now i will use my old phone.

IndigoHD said:
Thanks everyone for all your help and to you sltushar, especially!
I guess i will let it discharge for now and hope i can enter into download mode after that.
For now i will use my old phone.
Click to expand...
Click to collapse
Till don't be sad, we are here, finding solutions for you and mate like you

IndigoHD said:
Thanks everyone for all your help and to you sltushar, especially!
I guess i will let it discharge for now and hope i can enter into download mode after that.
For now i will use my old phone.
Click to expand...
Click to collapse
When phone is powered off, connect charger and keep pressing volume down +power button. It should take you straight to download mode.
I had exact problem and by coincidence today
Can u see the no cammand page of recovery.
If yes then try pressing both volume up and Power button together. Try again and again it must take you to recovery... If you land in recovery only for once you just have to select the reboot to bootloader option, so the download mode will open then.. then use OST

Im also having the same problem, after oreo stable update in my nokia 6 im not able get into recovery mode. Please someone help!

I'm discovered, that Windows 10 and USB 3.0/3.1 may cause problems with flashing using OST. If you can, use USB 2.0 ports and older Windows operating system (in my case - Windows 8.1). I also bricked my phone and my new notebook cannot communicate with my phone, after use OST using my older PC - it communicate without any problem

leszczu8023 said:
Im discovered, that Windows 10 and USB 3.0/3.1 may cause problems with flashing using OST. If you can, use USB 2.0 ports and older Windows operating system (in my case - Windows 8.1). I also bricked my phone and my new notebook cannot communicate with my phone, after use my older PC - it works without any problem
Click to expand...
Click to collapse
No need of older windows i have done it (today) on windows 10 (64bbit) with USB 3.0 port today.. and now i am typing this from my recoverd Nokia 6.
All you need is that your .NETFramework version 3.5 is enabled in windows and you install OST tool properly which includes all drivers.
Bdw my windows 10 is on Fall Creator update.

minhas729 said:
No need of older windows i have done it (today) on windows 10 (64bbit) with USB 3.0 port today.. and now i am typing this from my recoverd Nokia 6.
All you need is that your .NETFramework version 3.5 is enabled in windows and you install OST tool properly which includes all drivers.
Bdw my windows 10 is on Fall Creator update.
Click to expand...
Click to collapse
Idk, but maybe it depends by hardware and software configuration... I also installed OST with all frameworks included in package without any success. Phone starts flashing and... reboots into recovery mode after +/- 10% of flashing progress. But it's my own flash experience
And yep, I also using W10 Fall Creators Update (10.0.16299.192) x64

leszczu8023 said:
Idk, but maybe it depends by hardware and software configuration... I also installed OST with all frameworks included in package without any success. Phone starts flashing and... reboots into recovery mode after +/- 10% of flashing progress. But it's my own flash experience
And yep, I also using W10 Fall Creators Update (10.0.16299.192) x64
Click to expand...
Click to collapse
That reboot thing also occurred with me in first try... All you had to do is press Volume down and power till phone goes back to download mode. And just press next again

leszczu8023 said:
I'm discovered, that Windows 10 and USB 3.0/3.1 may cause problems with flashing using OST. If you can, use USB 2.0 ports and older Windows operating system (in my case - Windows 8.1). I also bricked my phone and my new notebook cannot communicate with my phone, after use OST using my older PC - it communicate without any problem
Click to expand...
Click to collapse
minhas729 said:
No need of older windows i have done it (today) on windows 10 (64bbit) with USB 3.0 port today.. and now i am typing this from my recoverd Nokia 6.
All you need is that your .NETFramework version 3.5 is enabled in windows and you install OST tool properly which includes all drivers.
Bdw my windows 10 is on Fall Creator update.
Click to expand...
Click to collapse
leszczu8023 said:
Idk, but maybe it depends by hardware and software configuration... I also installed OST with all frameworks included in package without any success. Phone starts flashing and... reboots into recovery mode after +/- 10% of flashing progress. But it's my own flash experience
And yep, I also using W10 Fall Creators Update (10.0.16299.192) x64
Click to expand...
Click to collapse
Exactly, @minhas729 even i did all the things from my windows 10 fall creator update and though windows 10 is the best OS to flash phones, it rarely ask for phone drivers or anything, everything is pre-installed and you can just go straight to flashing, automatically system updates downloads all required things automatically.
So no need to go back to the old windows OS to flash it. And also its true on the first go, the OST tool gives error and stuck to flashing splash....
All you need it try once again, second time it flashes successfully
minhas729 said:
That reboot thing also occurred with me in first try... All you had to do is press Volume down and power till phone goes back to download mode. And just press next again
Click to expand...
Click to collapse

Last night i installed oreo stable in my nokia 6 and i wanted to reset and clear cache partition, since i wanted a fresh start. And i tried to go to recovery mode and i was stuck at no command screen and i accidentally did a combination of " press and hold the power button then press the volume up button once". This took my phone to recovery mode from no command screen.