Ever since i flashed my Nokia 6 with the Oreo Beta update i no longer have access to the recovery menu.
I want to update to Oreo Final, but how can i do that now?
My Nokia is a TA-1000 model, but recognized as TA-1025.
IndigoHD said:
Ever since i flashed my Nokia 6 with the Oreo Beta update i no longer have access to the recovery menu.
I want to update to Oreo Final, but how can i do that now?
My Nokia is a TA-1000 model, but recognized as TA-1025.
Click to expand...
Click to collapse
There is 2 way to access recovery menu:
Normal Way:
Step 1) Turn the power off.
Step 2) Hold and Press Volume up + Power Button for about 10 second and release
Step 3) If you see Nokia logo it means failed repeat step 2
Step 4) If you see no command Android logo it means success
Step 5) In no command Android logo Press Volume up + Power Button + Home Button(Center One)
Step 6) You will see recovery menu
Developer Way:
Step 1) In the System->About Phone Tap Build Number Multiple Time to enable developer mode
Step 2) In Developer options enable usb debugging
Step 3) Connect your phone to computer using usb and Allow the access.
Step 4) Download sdk tools from developer.android.com
Step 5) Open adb by cmd and type "adb devices" to detect your phone
Step 6) Then type "adb reboot recovery" to force your phone to reboot and open recovery
Step 7) You should get no command Android logo
Step 8) In no command Android logo Press Volume up + Power Button + Home Button(Center One)
Step 9) You will see recovery menu
IndigoHD said:
Ever since i flashed my Nokia 6 with the Oreo Beta update i no longer have access to the recovery menu.
I want to update to Oreo Final, but how can i do that now?
My Nokia is a TA-1000 model, but recognized as TA-1025.
Click to expand...
Click to collapse
Reflash the mena firmware and wait if you receive otas. If not, you could flash the zip for final oreo. However, I think there's not the link for ta-1025 yet.
Gonz19 said:
Reflash the mena firmware and wait if you receive otas. If not, you could flash the zip for final oreo. However, I think there's not the link for ta-1025 yet.
Click to expand...
Click to collapse
Every zip work on TA-1025/and MENA firmware
Because, internally mena firmware is also TA-1025 and all OTA zips are made and targeted to TA-1025 varient only
So you can even flash OREO FINAL VERSION ALSO
Hit thanks button if you find this useful
Happy flashing
Tried flashing Oreo Final after finding the recovery, now my phone is broken.
Flashing didnt finish and it would no longer boot.
Tried restoring to an older firmware with OST LA, now it just flickers all the time.
Sometimes i see the recovery screen, but then it flickers off again.
Cant do anything anymore. Its broken.
IndigoHD said:
Tried flashing Oreo Final after finding the recovery, now my phone is broken.
Flashing didnt finish and it would no longer boot.
Tried restoring to an older firmware with OST LA, now it just flickers all the time.
Sometimes i see the recovery screen, but then it flickers off again.
Cant do anything anymore. Its broken.
Click to expand...
Click to collapse
Hey dont be sad , we are here to assist you
Try installing OTA manually
when u see the recovery menu, move to the OTA folder and install
Install till January, and then try the OTA of OFFICIAL OREO
this might work, you need to have patience and quick to install the OTA
if I would be there with you, I would love to help you
sltushar said:
Hey dont be sad , we are here to assist you
Try installing OTA manually
when u see the recovery menu, move to the OTA folder and install
Install till January, and then try the OTA of OFFICIAL OREO
this might work, you need to have patience and quick to install the OTA
if I would be there with you, I would love to help you
Click to expand...
Click to collapse
Tried it. Phone just keeps flickering. No longer reacts to anything i do and i cant use the recovery at all. Most of the time the screen is black then it suddenly flashes the recovery for a second.
Cant input any button commands and cant chose anything there.
IndigoHD said:
Tried it. Phone just keeps flickering. No longer reacts to anything i do and i cant use the recovery at all. Most of the time the screen is black then it suddenly flashes the recovery for a second.
Cant input any button commands and cant chose anything there.
Click to expand...
Click to collapse
Can you do one thing,
Its okay it flickers
Try this
When you think you are in recovery mode but still cant see
Then
Just press volume down 4 time(not so quickly, you should know that you pressed it 4 times)
Then click power button
Click one time volume down button
Then again power button
After 20 second press power button
Wait for to reboot the device, if it doesn't
Try force rebooting
Hope this work:fingers-crossed:
sltushar said:
Can you do one thing,
Its okay it flickers
Try this
When you think you are in recovery mode but still cant see
Then
Just press volume down 4 time(not so quickly, you should know that you pressed it 4 times)
Then click power button
Click one time volume down button
Then again power button
After 20 second press power button
Wait for to reboot the device, if it doesn't
Try force rebooting
Hope this work:fingers-crossed:
Click to expand...
Click to collapse
Doesnt work. Forcing a reboot doesnt work either.
Soft reboot works, but i cant get into download mode this way.
IndigoHD said:
Doesnt work. Forcing a reboot doesnt work either.
Soft reboot works, but i cant get into download mode this way.
Click to expand...
Click to collapse
These steps are for hard reset not for download mode
Well i have one solution for you, but its lil expensive
I have firmware, which can be installed through infinity CM2 dongle
This dongle can upgrade, downgrade and do much things on Nokia devices
It costs 70 US dollar
This can only work for you, cause Nokia care will replace your motherboard, they wont repair it, because even they don't know how to deal with it
So if you can buy this dongle then you can flash it else wait for OFFICIAL OREO firmware to be come soon
sltushar said:
These steps are for hard reset not for download mode
Well i have one solution for you, but its lil expensive
I have firmware, which can be installed through infinity CM2 dongle
This dongle can upgrade, downgrade and do much things on Nokia devices
It costs 70 US dollar
This can only work for you, cause Nokia care will replace your motherboard, they wont repair it, because even they don't know how to deal with it
So if you can buy this dongle then you can flash it else wait for OFFICIAL OREO firmware to be come soon
Click to expand...
Click to collapse
Thanks everyone for all your help and to you sltushar, especially!
I guess i will let it discharge for now and hope i can enter into download mode after that.
For now i will use my old phone.
IndigoHD said:
Thanks everyone for all your help and to you sltushar, especially!
I guess i will let it discharge for now and hope i can enter into download mode after that.
For now i will use my old phone.
Click to expand...
Click to collapse
Till don't be sad, we are here, finding solutions for you and mate like you
IndigoHD said:
Thanks everyone for all your help and to you sltushar, especially!
I guess i will let it discharge for now and hope i can enter into download mode after that.
For now i will use my old phone.
Click to expand...
Click to collapse
When phone is powered off, connect charger and keep pressing volume down +power button. It should take you straight to download mode.
I had exact problem and by coincidence today
Can u see the no cammand page of recovery.
If yes then try pressing both volume up and Power button together. Try again and again it must take you to recovery... If you land in recovery only for once you just have to select the reboot to bootloader option, so the download mode will open then.. then use OST
Im also having the same problem, after oreo stable update in my nokia 6 im not able get into recovery mode. Please someone help!
I'm discovered, that Windows 10 and USB 3.0/3.1 may cause problems with flashing using OST. If you can, use USB 2.0 ports and older Windows operating system (in my case - Windows 8.1). I also bricked my phone and my new notebook cannot communicate with my phone, after use OST using my older PC - it communicate without any problem
leszczu8023 said:
Im discovered, that Windows 10 and USB 3.0/3.1 may cause problems with flashing using OST. If you can, use USB 2.0 ports and older Windows operating system (in my case - Windows 8.1). I also bricked my phone and my new notebook cannot communicate with my phone, after use my older PC - it works without any problem
Click to expand...
Click to collapse
No need of older windows i have done it (today) on windows 10 (64bbit) with USB 3.0 port today.. and now i am typing this from my recoverd Nokia 6.
All you need is that your .NETFramework version 3.5 is enabled in windows and you install OST tool properly which includes all drivers.
Bdw my windows 10 is on Fall Creator update.
minhas729 said:
No need of older windows i have done it (today) on windows 10 (64bbit) with USB 3.0 port today.. and now i am typing this from my recoverd Nokia 6.
All you need is that your .NETFramework version 3.5 is enabled in windows and you install OST tool properly which includes all drivers.
Bdw my windows 10 is on Fall Creator update.
Click to expand...
Click to collapse
Idk, but maybe it depends by hardware and software configuration... I also installed OST with all frameworks included in package without any success. Phone starts flashing and... reboots into recovery mode after +/- 10% of flashing progress. But it's my own flash experience
And yep, I also using W10 Fall Creators Update (10.0.16299.192) x64
leszczu8023 said:
Idk, but maybe it depends by hardware and software configuration... I also installed OST with all frameworks included in package without any success. Phone starts flashing and... reboots into recovery mode after +/- 10% of flashing progress. But it's my own flash experience
And yep, I also using W10 Fall Creators Update (10.0.16299.192) x64
Click to expand...
Click to collapse
That reboot thing also occurred with me in first try... All you had to do is press Volume down and power till phone goes back to download mode. And just press next again
leszczu8023 said:
I'm discovered, that Windows 10 and USB 3.0/3.1 may cause problems with flashing using OST. If you can, use USB 2.0 ports and older Windows operating system (in my case - Windows 8.1). I also bricked my phone and my new notebook cannot communicate with my phone, after use OST using my older PC - it communicate without any problem
Click to expand...
Click to collapse
minhas729 said:
No need of older windows i have done it (today) on windows 10 (64bbit) with USB 3.0 port today.. and now i am typing this from my recoverd Nokia 6.
All you need is that your .NETFramework version 3.5 is enabled in windows and you install OST tool properly which includes all drivers.
Bdw my windows 10 is on Fall Creator update.
Click to expand...
Click to collapse
leszczu8023 said:
Idk, but maybe it depends by hardware and software configuration... I also installed OST with all frameworks included in package without any success. Phone starts flashing and... reboots into recovery mode after +/- 10% of flashing progress. But it's my own flash experience
And yep, I also using W10 Fall Creators Update (10.0.16299.192) x64
Click to expand...
Click to collapse
Exactly, @minhas729 even i did all the things from my windows 10 fall creator update and though windows 10 is the best OS to flash phones, it rarely ask for phone drivers or anything, everything is pre-installed and you can just go straight to flashing, automatically system updates downloads all required things automatically.
So no need to go back to the old windows OS to flash it. And also its true on the first go, the OST tool gives error and stuck to flashing splash....
All you need it try once again, second time it flashes successfully
minhas729 said:
That reboot thing also occurred with me in first try... All you had to do is press Volume down and power till phone goes back to download mode. And just press next again
Click to expand...
Click to collapse
Last night i installed oreo stable in my nokia 6 and i wanted to reset and clear cache partition, since i wanted a fresh start. And i tried to go to recovery mode and i was stuck at no command screen and i accidentally did a combination of " press and hold the power button then press the volume up button once". This took my phone to recovery mode from no command screen.
Related
Hello,
I am very new to rooting etc. I rooted my phone a few days ago, unlocked bootloader and tried to flash cm11.0 with rom manager (cwmg) following this link:
http://forum.xda-developers.com/showthread.php?t=2521239
Unfortunately I didn´t understand the instructions well, so after wiping caches, instead of doing a full format I did a user data etc format (which i now think was a factory reset). Tried flashing, didn´t succeed.
Anyway, when I try to switch it on I only get the lg logo and then the batery charging thingy When I try to go to recovery mode with volume up power and menu button, my phone goes on a loop of lg and cyanomod logos untill infinity ( Have to take off the battery). Tried to use heimdall (as i have a mac) to flash kdz back to it, but phone was not recognized. On my pc tried the same, but again phone not seen. I can see it on my computer as an unrecognized external usb but cannot explore. Any ideas on what to do??
thanks in advance
franky.frangi said:
Hello,
I am very new to rooting etc. I rooted my phone a few days ago, unlocked bootloader and tried to flash cm11.0 with rom manager (cwmg) following this link:
http://forum.xda-developers.com/showthread.php?t=2521239
Unfortunately I didn´t understand the instructions well, so after wiping caches, instead of doing a full format I did a user data etc format (which i now think was a factory reset). Tried flashing, didn´t succeed.
Anyway, when I try to switch it on I only get the lg logo and then the batery charging thingy When I try to go to recovery mode with volume up power and menu button, my phone goes on a loop of lg and cyanomod logos untill infinity ( Have to take off the battery). Tried to use heimdall (as i have a mac) to flash kdz back to it, but phone was not recognized. On my pc tried the same, but again phone not seen. I can see it on my computer as an unrecognized external usb but cannot explore. Any ideas on what to do??
thanks in advance
Click to expand...
Click to collapse
power off your device.
long press
1) "vol -"
2) home button
3) power button
for some second
are you able to enter in recovery?
lferlito said:
power off your device.
long press
1) "vol -"
2) home button
3) power button
for some second
are you able to enter in recovery?
Click to expand...
Click to collapse
No, it goes into logos loop.
franky.frangi said:
No, it goes into logos loop.
Click to expand...
Click to collapse
i don't know, man
but for the future, before installing a custom rom
remember to install a recovery
it's very important
hope someone better than me will help you
:fingers-crossed:
lferlito said:
i don't know, man
but for the future, before installing a custom rom
remember to install a recovery
it's very important
hope someone better than me will help you
:fingers-crossed:
Click to expand...
Click to collapse
But I did, throught clockworkmod (first thing I did) ....and also did a nandroid backup...just don´t know how to access them...
franky.frangi said:
But I did, throught clockworkmod (first thing I did) ....and also did a nandroid backup...just don´t know how to access them...
Click to expand...
Click to collapse
on my L5, i long press those 3 buttons until LG logo boot appears..
i wait some second and it appears the CWM reco
i don't know if there are other ways to enter in recovery mode..
yeah me neither.mine used to do the same before the flashing.thanks thought.lets see if someone has another idea...
franky.frangi said:
yeah me neither.mine used to do the same before the flashing.thanks thought.lets see if someone has another idea...
Click to expand...
Click to collapse
As soon as you plug your USB into your phone, hold down the volume up (+) button and the power button and release them after holding them down for about 2 to 3 seconds. Then, install the USB driver for your phone with the LG Mobile Support Tool. Secondly, download and install the LG PC Suite program and last but not least, download the KDZ program. Install the correct firmware for your phone and make sure you select 'EMERGENCY' from the list on the top right of the KDZ program. Select your downloaded firmware file and start the program. If everything worked out, the program should crash after it's done and your phone should reboot. Disconnect your phone from the computer if it doesn't reboot and try to boot it up again.
You can find all of these programs along with tutorials on how they work by searching on either XDA or Google.
did forcing recovery/download work ?
TahaX said:
As soon as you plug your USB into your phone, hold down the volume up (+) button and the power button and release them after holding them down for about 2 to 3 seconds. Then, install the USB driver for your phone with the LG Mobile Support Tool. Secondly, download and install the LG PC Suite program and last but not least, download the KDZ program. Install the correct firmware for your phone and make sure you select 'EMERGENCY' from the list on the top right of the KDZ program. Select your downloaded firmware file and start the program. If everything worked out, the program should crash after it's done and your phone should reboot. Disconnect your phone from the computer if it doesn't reboot and try to boot it up again.
You can find all of these programs along with tutorials on how they work by searching on either XDA or Google.
Click to expand...
Click to collapse
the phone off usb in and buttons did it work ?
Actually didn´t work,I have drivers already, LG PC Suite program , and KDZ. Problem is my phone is not detected by pc, so kdz unzips and then says : phone not detected, with or without battery...doesn´t go into recovery mode with buttons, just lg and cyanomod logos...
I don`t know if this can b fixed.....How can you flash anything if it´s not detected....
I´ll give it a try again tomorrow, without trying to enter recovery mode....but tried lots of buttons combinations and wasn´t working
Press these buttons
volume +
,volume -
home button
together with the power button
release all buttons except power button when you get a vibration
release the power button immediately after the lg logo has appered
this should let you get in the recovery menu
FULL STEP BY STEP GUIDE
found http://forum.xda-developers.com/showthread.php?t=2486512
IGGYVIP said:
Press these buttons
volume +
,volume -
home button
together with the power button
release all buttons except power button when you get a vibration
release the power button immediately after the lg logo has appered
this should let you get in the recovery menu
FULL STEP BY STEP GUIDE
found http://forum.xda-developers.com/showthread.php?t=2486512
Click to expand...
Click to collapse
Finally!! This worked....I can get in the recovery menu!!!
Before I do anything I´ll really think about what rom I want to use )
Thanks lot everyone...hope it gives me no more issues.
franky.frangi said:
Finally!! This worked....I can get in the recovery menu!!!
Before I do anything I´ll really think about what rom I want to use )
Thanks lot everyone...hope it gives me no more issues.
Click to expand...
Click to collapse
happy flashing
i tried rooting my phone huawei p8 lite but got stuck at installing super su now i cannot start my device ..i cannot boot into flash mode or recovery ..i need help ...it wont even charge
pepeline said:
i tried rooting my phone huawei p8 lite but got stuck at installing super su now i cannot start my device ..i cannot boot into flash mode or recovery ..i need help ...it wont even charge
Click to expand...
Click to collapse
What's your build number what version of supersu did you try to flash?
Shutdown your device, put your current build onto 'dload' folder in the sdcard and press the following key combo: POWER, VOL-UP & VOL-DOWN, it should enable automatic update process
amageek said:
What's your build number what version of supersu did you try to flash?
Shutdown your device, put your current build onto 'dload' folder in the sdcard and press the following key combo: POWER, VOL-UP & VOL-DOWN, it should enable automatic update process
Click to expand...
Click to collapse
My phone restarts right at the logo when i press power vol up and vol down
pepeline said:
My phone restarts right at the logo when i press power vol up and vol down
Click to expand...
Click to collapse
Shut it down amd press those 3 keys combo.. upon seeing Huawei Logo and vibration, release the Power key while holding the other 2... That ought to do it
Man, your phone is badly bricked. If you don't have at least access to fastboot, then you're screwed.
Good for me to I have the same problem. I was trying to get to stock ( I have made it several times), but the last time was a fail... The whole process of sending firmware was ok. then a reboot and brick.
Now the huawei screen and the short vibration appears and shutdown.
I was trying everything.
In device manager the phone is displayed as mobile devices \ volume f:\ (drive letter)
in connected devices the phone is detected as
hi6210sft
Phone is not detected in fastboot or ADB.
I met this problem yesterday(I hope the identical ). Because I have two booting animations, one from Vodafone, I guess I shutdown early during installation. It just froze. Then it didn't boot and stock recovery didn't help
My solution needs some recovery software like twrp. Press three buttons at the same time until twrp mode. Copy zip file for SuperSU to phone or sdcard, then flash it. After that my phone works again.
You mentioned that you cannot start recovery. Try more. After installing twrp, starting it is quite annoying. Sometimes it just doesn't start or stock recovery starts. An alternative way is to go to whatever mode, and try adb or fast boot to reboot to recovery. Pressing button requires techniques which j don't have
I can't enter TWRP non combination is working for me. Installing firmware using dload from sd card also.
okay if non of these worked you can try flashing the whole update.app file by fastboot..
tools you will need
1- download the official huawei firmware from the official site
2- download Huawei Update Extractor
3- download minimal adb and fastboot
check the unbricking chapter of this thread
Note: to get in fastboot make sure you connected your phone to computer and press the vol down and power down buttons.. if none of these worked your phone is hard bricked .-. .. try opening the phone and reconnecting the battery worked with someone
if you need any help just pm me or replay on this thread hope that help you
Ok thx. I have already opened the phone to reconnect the battery
And then I was trying the combinations;
Battery connected vol- +power - Huawei logo and vibration and shutdown, no fastboot
Battery disconnected, vol-+power and connecting cable to phone - the same
Battery disconnected combination vol + vol - + ppwer, with sd card dload, the same
Battery connected combination vol + vol - power, sd card dload, the same
Any other suggestions?
The phone is recognized in Windows in device manager as mobile device as volume with a letter, I cant change the drivers to the right ones. I can't enter the storage it's unrecognized format.
Any other suggestions?
mercom said:
Any other suggestions?
Click to expand...
Click to collapse
it is easy to suggest others.. I too advised you.. but today i am facing the same problem...
what I tried:
Reinstalling the same ROM using dload method
Upgrading to other ROM (using both dload and flashing 4 image method)
Downgrading
Restoring from the backup
At one point, the phone booted up all well except the Wifi Module... So I flashed another ROM and stuck again...
the worst thing that I don't have any connection to fastboot Each firmware installation method fails
mercom said:
the worst thing that I don't have any connection to fastboot Each firmware installation method fails
Click to expand...
Click to collapse
yes, mine too... or I could say flashing succeeds but there's some problem with the boot partition... will get my phone today from the Customer Care and try again (if they can't repair).
you can try removing the back cover and unplugging the battery... that is one of the few things I will do today as I get my phone back..
mercom said:
the worst thing that I don't have any connection to fastboot Each firmware installation method fails
Click to expand...
Click to collapse
ok made it back.. just flashed the boot.img from b594 (the one I was using when my mobile got bricked)... somehow made it back. But now I am having a problem with the battery. It doesn't charge when the device is switched on, only when the device is switched off... will see for few days, if there's problem will take it back to service centre again
I have already removed back cover and was trying to reconnect the battery to do clear run. But the only thing is discovered in windows is a driver for storage and I can't change the driver to ADB or FASTBOOT
Now I have connected phone w PC on adb devices I see only emulator-5554 device. In Device manager I see the storage as a Mobile Device.
Nope it was Bluestacks
mercom said:
I have already removed back cover and was trying to reconnect the battery to do clear run. But the only thing is discovered in windows is a driver for storage and I can't change the driver to ADB or FASTBOOT
Now I have connected phone w PC on adb devices I see only emulator-5554 device. In Device manager I see the storage as a Mobile Device.
Nope it was Bluestacks
Click to expand...
Click to collapse
Switch off your device and then connect it to PC but just hold the volume- key.. that should get you in fastboot mode... I did that and then flashed the boot.img of the current ROM. This should boot it up...
Nope it doesn't work I was trying it already
I've been using Cyanogenmod 13.1 (rooted) and I decided to flash a ROM with Nougat. I flashed lineage-14.1-20170320-nightly-d802-signed and open_gapps-arm-7.1-mini-20170325 and everything worked fine except I didn't have SuperSU. I tried flashing SuperSU-v2.79-201612051815 and when I tried to boot into system I got this screen (with the LG logo below) http://i.imgur.com/O7vOtab.png I tried many methods like this https://forum.xda-developers.com/showthread.php?t=2582142 and this https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404 to no avail. In Linux when I used the ls /dev/sd* command in the terminal the phone wouldn't show up and later in Windows I got the PC to recognize the phone as Marshall USB Composite Device 9006 http://i.imgur.com/a5WHV9P.png and in Disk Management the phone partition shows up un-initialised http://i.imgur.com/XaVKIu7.png . Help I don't know what to do now. Tell me if I should provide more information.
I had the exact same problem. Then i found a solution. Just dont flash the normal Supersu, you need to flash the Supersu BUMPED file. Just go in recovery, press 10 sec the power button to be sure the phone is off, then hold volume down and power button until the logo appears, then release and press again (fast) then choose yes, yes. Just flash the Bumped and if recovery asks to do root choose NO.
The Bumped which worked for me
http://www108.zippyshare.com/v/ZjxTLdkp/file.html
I hope i could help
RelaxBuddy said:
I had the exact same problem. Then i found a solution. Just dont flash the normal Supersu, you need to flash the Supersu BUMPED file. Just go in recovery, press 10 sec the power button to be sure the phone is off, then hold volume down and power button until the logo appears, then release and press again (fast) then choose yes, yes. Just flash the Bumped and if recovery asks to do root choose NO.
The Bumped which worked for me
I hope i could help
Click to expand...
Click to collapse
Well I had no luck getting into recovery before but that was before I took apart my phone because I couldn't turn it off (it keeped bootlooping) but I will try, thanks
Bluellama said:
Well I had no luck getting into recovery before but that was before I took apart my phone because I couldn't turn it off (it keeped bootlooping) but I will try, thanks
Click to expand...
Click to collapse
Yeah Bad same Problem, turned off and it went on, then again bootloop. But if you press the power button long enough then its completely off. In cyanogen mod i had Problem that i couldnt get into recovery with power button+volume down.
So you should flash kdz, get oneclickroot for LG g2, then autorec lollipop to get recovery. Then flash Rom + gapps + The bumped file.
If you dont know how to flash kdz, you can ask here. I will help
Good luck
RelaxBuddy said:
Yeah Bad same Problem, turned off and it went on, then again bootloop. But if you press the power button long enough then its completely off. In cyanogen mod i had Problem that i couldnt get into recovery with power button+volume down.
So you should flash kdz, get oneclickroot for LG g2, then autorec lollipop to get recovery. Then flash Rom + gapps + The bumped file.
If you dont know how to flash kdz, you can ask here. I will help
Good luck
Click to expand...
Click to collapse
Previously I couldn't go into download mode but I will try now since I managed to turn off the smartphone completely. Before it would just stay on with a black screen.
Bluellama said:
Previously I couldn't go into download mode but I will try now since I managed to turn off the smartphone completely. Before it would just stay on with a black screen.
Click to expand...
Click to collapse
Yeah Ok. When I wanted to turn It off, I just pressed the power button until the screen went black and the logo came again but after 2-3 sec the screen went black again, then it was off (just hold power button for 10sec)
Try that when your phone keeps restarting
RelaxBuddy said:
Yeah Ok. When I wanted to turn It off, I just pressed the power button until the screen went black and the logo came again but after 2-3 sec the screen went black again, then it was off (just hold power button for 10sec)
Try that when your phone keeps restarting
Click to expand...
Click to collapse
KDZ flashing gets stuck at 60% (Verifying phone connection) http://i.imgur.com/AAHKqcd.png
Should I just let it sit through its emotional problems?
Bluellama said:
KDZ flashing gets stuck at 60% (Verifying phone connection) http://i.imgur.com/AAHKqcd.png
Should I just let it sit through its emotional problems?
Click to expand...
Click to collapse
Get the lg mobile support tool, install it. Then open and connect your phone via download mode, it will find the phone and download the kdz for it. That should work.
If it doesn't install automatically, click on additional options then click on set upgrade error back, or something like that.
Before all that install the driver from
http://www.lg.com/de/support/service-mobil-telefon/lg-G2
Then you can start with lg mobile support tool
RelaxBuddy said:
Get the lg mobile support tool, install it. Then open and connect your phone via download mode, it will find the phone and download the kdz for it. That should work.
If it doesn't install automatically, click on additional options then click on set upgrade error back, or something like that.
Before all that install the driver from
http://www.lg.com/de/support/service-mobil-telefon/lg-G2
Then you can start with lg mobile support tool
Click to expand...
Click to collapse
Ok I managed to flash a stock rom and the problem was... usb 3.0. I connected the phone to usb 2 and it worked flawlessly. If anybody has a problem like I did you can message me
Hi, I'm using Nokia 6 ( TA 1000) mobile with Playstore ( i purchased it local mobile shop and they said it's with Play-store. but i haven't received any update from 2017- April security update.
so i found some ways to manual update (https://forum.xda-developers.com/nokia-6/how-to/nokia-6-official-firmware-mena-region-t3664441) and i followed some steps form Xda forum. finally i got oreo update, but my mobile model change to TA-2025 and sounds/camera quality dropped. ( sound looks like mono speaker)
then i tired to go back to old model using OSTLA_v6.1.2.zip
but unfortunately mobile goes to download mode and now it's not turn on or turn off. (display on until battey low )
"Powered by android - download mode" test only in background
Is there a way to fix this issue ? i didn't found any place to fix i
U must flash desember OTA update firstly
Cek this https://forum.xda-developers.com/nokia-6/how-to/nokia-6-ta-1000-homebrew-stock-android-t3752006
After stuck on recovery u can flash original firmware nougat with OST LA 6.0.4
hawwin88 said:
U must flash desember OTA update firstly
Cek this https://forum.xda-developers.com/nokia-6/how-to/nokia-6-ta-1000-homebrew-stock-android-t3752006
After stuck on recovery u can flash original firmware nougat with OST LA 6.0.4
Click to expand...
Click to collapse
but phone is stuck in the download mode. is there a way to get back to recovery mode ?
Press power switch long?
Mikelsson70 said:
Press power switch long?
Click to expand...
Click to collapse
restarting & once again download mood
Try
- power off phone
- put phone in charger (wait about 10 seconds)
- Press vol+ and power buttons about 10-12s
(now appear death of android)
- Press power button down and then click vol+ once and then don't press any button
swipe cache or flash
try again if not go recovery
if after couple try, recovery still missing. You must flash it.
Mikelsson70 said:
Try
- power off phone
- put phone in charger (wait about 10 seconds)
- Press vol+ and power buttons about 10-12s
(now appear death of android)
- Press power button down and then click vol+ once and then don't press any button
swipe cache or flash
try again if not go recovery
if after couple try, recovery still missing. You must flash it.
Click to expand...
Click to collapse
When i connect charger, then it's automatically power ON and goes to download mood.
so i tired power off phone in charger, but then it's always restart only ( goes to download mood)
Mikelsson70 said:
Try
- power off phone
- put phone in charger (wait about 10 seconds)
- Press vol+ and power buttons about 10-12s
(now appear death of android)
- Press power button down and then click vol+ once and then don't press any button
swipe cache or flash
try again if not go recovery
if after couple try, recovery still missing. You must flash it.
Click to expand...
Click to collapse
is there a way to use any online tool to flash it ?
press and hold three buttons (vol up, down & power) at the same time
maybe you will out from download mode
hawwin88 said:
press and hold three buttons (vol up, down & power) at the same time
maybe you will out from download mode
Click to expand...
Click to collapse
yes, it's work for power off ( display "shout down" in the top left side for the 1st time), but when i plug charger, once again it's goes to download mode.
emmazz said:
When i connect charger, then it's automatically power ON and goes to download mood.
so i tired power off phone in charger, but then it's always restart only ( goes to download mood)
Click to expand...
Click to collapse
edit: It seems OST tool won't work. If we are on 8.1
Try use OST LA and flash stock firmware again. Sorry i never used it, so i can't help more.
If you need EDL cable, but it is ordinary usb cable. Only 2 wires put together when flash.
You go always download mode, so i think you not need.
http://forum.gsmhosting.com/vbb/f805/edl-cable-answered-2192111/
try 1st
https://forum.xda-developers.com/no...ia-8-official-firmware-links-updated-t3678487
( note nokia 8 forum)
or it not working try
try 2nd
https://forum.xda-developers.com/showpost.php?p=75131201&postcount=4
I hope some more things know can help you.
These methods are almost emergency use only.
Mikelsson70 said:
edit: It seems OST tool won't work. If we are on 8.1
Try use OST LA and flash stock firmware again. Sorry i never used it, so i can't help more.
If you need EDL cable, but it is ordinary usb cable. Only 2 wires put together when flash.
You go always download mode, so i think you not need.
http://forum.gsmhosting.com/vbb/f805/edl-cable-answered-2192111/
try 1st
https://forum.xda-developers.com/no...ia-8-official-firmware-links-updated-t3678487
( note nokia 8 forum)
or it not working try
try 2nd
https://forum.xda-developers.com/showpost.php?p=75131201&postcount=4
I hope some more things know can help you.
These methods are almost emergency use only.
Click to expand...
Click to collapse
Thank you so much, i'll try :crying:
emmazz said:
yes, it's work for power off ( display "shout down" in the top left side for the 1st time), but when i plug charger, once again it's goes to download mode.
Click to expand...
Click to collapse
If still goes to download mode, maybe u can try this
Connect ur phone with computer
And open command in OST LA folder
Type this =
fastboot continue
and press enter
hawwin88 said:
If still goes to download mode, maybe u can try this
Connect ur phone with computer
And open command in OST LA folder
Type this =
fastboot continue
and press enter
Click to expand...
Click to collapse
mobile restarting and getting "usb detect" sound in PC continues. it's not stop until unplug
Hey guys, Nokia 6 mobile handover to the small repair shop in the town and, now Mobile is working fine, with the TA-1021 and i have updated to Android 9. (may 1, 2019 Security update.)
but now sounds are very loud and it's very annoying. i don't know what happened. but sound quality dropped to very low. and also Mobile camara quality also like VGA camara.
is there a way to fix this issue ? or restore to the original TA-1000 version. :crying: :crying: :crying:
if you have unlocked bootloader, it much easier just download NOST by hikary, and some stock nougat rom.
just flash and it work again.
My ta-1021 have this couple month ago, stuck on download after downgrade from nougat to oreo.
frnsl3 said:
if you have unlocked bootloader, it much easier just download NOST by hikary, and some stock nougat rom.
just flash and it work again.
My ta-1021 have this couple month ago, stuck on download after downgrade from nougat to oreo.
Click to expand...
Click to collapse
is there a way to check "bootloader unlock" ?
emmazz said:
is there a way to check "bootloader unlock" ?
Click to expand...
Click to collapse
in stock all phone will ship with locked bootloader.
to check just reboot your phone, in "powered by android" display there is a message or not.
if not your phone has locked bootloader.
frnsl3 said:
in stock all phone will ship with locked bootloader.
to check just reboot your phone, in "powered by android" display there is a message or not.
if not your phone has locked bootloader.
Click to expand...
Click to collapse
hmm. only powered by android logo, and then nokia Logo.
is there any tutorials to unclock this bootloader ? my mobile is Nokia 6, TA 1000 ( but current firmware is TA-1021 - android 9 latest update) i want to go back to TA- 1000 or TA 1003 (happy to use android 9 with ta 1000 or ta 1003)
I bought the Axon 7 Mini B14 a few days ago and installed a custom Rom without backing up the original, worst mistake I won't recommend making, so I thought this zip from zteusa site may help resolve the issue, but now my phone says its corrupted and it needs to reset but would instead reboot. I would try to go to recovery by the Vol up+Power button but i would only get a white screen. Is there a fix, or do I need to replace the motherboard?
Let me rephrase this, my phone wont boot to fastboot mode, and wont allow me to use adb. Is there a way I could fix this? Upon further inspection there is a recovery, but its a white screen but I still can't use adb or fastboot
Min3 said:
Let me rephrase this, my phone wont boot to fastboot mode, and wont allow me to use adb. Is there a way I could fix this? Upon further inspection there is a recovery, but its a white screen but I still can't use adb or fastboot
Click to expand...
Click to collapse
https://www.ebay.com/itm/Deep-Flash...401505148974?_trksid=p2349526.m4383.l4275.c10
https://forum.xda-developers.com/axon-7-mini/help/zte-axon-7-mini-hard-bricked-t3835005
https://forum.xda-developers.com/axon-7/how-to/guide-axon-7-universal-unbrick-t3814413
k500zm said:
https://www.ebay.com/itm/Deep-Flash...401505148974?_trksid=p2349526.m4383.l4275.c10
https://forum.xda-developers.com/axon-7-mini/help/zte-axon-7-mini-hard-bricked-t3835005
https://forum.xda-developers.com/axon-7/how-to/guide-axon-7-universal-unbrick-t3814413
Click to expand...
Click to collapse
Tried to do this without the edl cord, got it to edl mode through the button combination, but when I tried to glash it it said it failed. I am trying a different tool to see if it works
k500zm said:
https://www.ebay.com/itm/Deep-Flash...401505148974?_trksid=p2349526.m4383.l4275.c10
https://forum.xda-developers.com/axon-7-mini/help/zte-axon-7-mini-hard-bricked-t3835005
https://forum.xda-developers.com/axon-7/how-to/guide-axon-7-universal-unbrick-t3814413
Click to expand...
Click to collapse
I've actually fixed the problem with the axon 7 edl tool for the pc, thanks for the full tsk files though
Good for you matey
don't know what to do
Hej there,
I just bought a ZTE Axon 7 Mini and did a lot of stupid things...
1. try to flash TWRP with Android 6 (doesn't work)
2. update to 7.1.1 from here via adb sideload
3. install TWRP from here
4. reboot the phone - the phone only turned on in recovery-mode
5. try to flash the update again via adb sideload
and then nothing I think it's bricked
First I thought it doesn't turn on - but the cellphone is on, it vibrates all the time like a little heartbeat - tocktock, tocktock, tocktock...
Now if I press Vol+ AND Vol- for seconds, it will stop the vibrations, but when I press any other button or put it onto power it will start again to vibrate, but doesn't turn on.
Can anyone help me please?
My Axon 7 mini is back in life... How does it get there?
Buy a EDL-Cable
Get phone in EDL/TWRP
Flash Stock-Recovery
In Stock-Recovery make a factory-reset
Flash Stock-ROM via EDL
Install Magisk v16.7 via TWRP (newer version doesn't work for me)
chaosaeffchen said:
Hej there,
I just bought a ZTE Axon 7 Mini and did a lot of stupid things...
1. try to flash TWRP with Android 6 (doesn't work)
2. update to 7.1.1 from here via adb sideload
3. install TWRP from here
4. reboot the phone - the phone only turned on in recovery-mode
5. try to flash the update again via adb sideload
and then nothing I think it's bricked
First I thought it doesn't turn on - but the cellphone is on, it vibrates all the time like a little heartbeat - tocktock, tocktock, tocktock...
Now if I press Vol+ AND Vol- for seconds, it will stop the vibrations, but when I press any other button or put it onto power it will start again to vibrate, but doesn't turn on.
Can anyone help me please?
Click to expand...
Click to collapse
Did you flash no verity boot.img?
bius88 said:
Did you flash no verity boot.img?
Click to expand...
Click to collapse
I thought I did... But after hours of waiting I did the following and it works again
chaosaeffchen said:
My Axon 7 mini is back in life... How does it get there?
Buy a EDL-Cable
Get phone in EDL/TWRP
Flash Stock-Recovery
In Stock-Recovery make a factory-reset
Flash Stock-ROM via EDL
Install Magisk v16.7 via TWRP (newer version doesn't work for me)
Click to expand...
Click to collapse