Related
Hi guys.
My phone after installing a rom, maybe corrupted, does not enter into emergency mode or recovery mode or PC Suite USB mode.
There is some more method install another rom?
(my phone is a LG optimus L7)
continuation of a good job guys
Can the pone enter CWM? Try change vol button (if earlier entered by pressing vol+ now try vol- and home and power button until vibrate)
raul338 said:
Can the pone enter CWM? Try change vol button (if earlier entered by pressing vol+ now try vol- and home and power button until vibrate)
Click to expand...
Click to collapse
Yes, already tried with phone but the phone restarts and appears black screen and back to normal start. I've tried all the buttons and sequences but does not work any.
kadekz said:
Yes, already tried with phone but the phone restarts and appears black screen and back to normal start. I've tried all the buttons and sequences but does not work any.
Click to expand...
Click to collapse
Then search for a downgrade kdz here in the forums
raul338 said:
Then search for a downgrade kdz here in the forums
Click to expand...
Click to collapse
Already tried that but I get to the step "USB Connection Type" and I can not abide the "Software for LG usb" :s
kadekz said:
Already tried that but I get to the step "USB Connection Type" and I can not abide the "Software for LG usb" :s
Click to expand...
Click to collapse
You don't need that for a kdz with reset all data... Whats the link for the tutorial that you are following?
raul338 said:
You don't need that for a kdz with reset all data... Whats the link for the tutorial that you are following?
Click to expand...
Click to collapse
I do not follow any tutorial, i'm already used to change the rom through cwm, wipes, install zip from SD through and wipes again.
But now not open the cwm, is black screen and reboots to normal mode. I do not understand what is happening. :x
kadekz said:
I do not follow any tutorial, i'm already used to change the rom through cwm, wipes, install zip from SD through and wipes again.
But now not open the cwm, is black screen and reboots to normal mode. I do not understand what is happening. :x
Click to expand...
Click to collapse
I dont now if this help, but only way that works for me to get into recovery, is holding both, vol+ and vol- keys, while presing home, and power button, when the phone vibrates, release power button, but keep holding vol+, vol- and home button for about 2 seconds, then release everything....
phone should boot into recovery now...
here's a guide for flashing original firmware. http://forum.xda-developers.com/showpost.php?p=31828740&postcount=1191
lots, and i mean, lots of information is on this post http://forum.xda-developers.com/showthread.php?t=1664322.
good luck
vashminted said:
I dont now if this help, but only way that works for me to get into recovery, is holding both, vol+ and vol- keys, while presing home, and power button, when the phone vibrates, release power button, but keep holding vol+, vol- and home button for about 2 seconds, then release everything....
phone should boot into recovery now...
here's a guide for flashing original firmware. http://forum.xda-developers.com/showpost.php?p=31828740&postcount=1191
lots, and i mean, lots of information is on this post http://forum.xda-developers.com/showthread.php?t=1664322.
good luck
Click to expand...
Click to collapse
yes, I also used this combination of keys to enter the recovery once but now does not work, call a black screen and does not vibrate.
By KDZ also can not do anything because they also do not enter the emergency mode or in "pc suite".
Not even know how to solve this problem: x
And the worst is that I need the smartphone
kadekz said:
yes, I also used this combination of keys to enter the recovery once but now does not work, call a black screen and does not vibrate.
By KDZ also can not do anything because they also do not enter the emergency mode or in "pc suite".
Not even know how to solve this problem: x
And the worst is that I need the smartphone
Click to expand...
Click to collapse
How do you enter in emergency mode?
I do it by taking the battery off, then conect the cable to phone, hold vol+ (or vol-, i dont remember) and then conect the cable to the pc
vashminted said:
How do you enter in emergency mode?
I do it by taking the battery off, then conect the cable to phone, hold vol+ (or vol-, i dont remember) and then conect the cable to the pc
Click to expand...
Click to collapse
That is the problem, not enter the emergency mode. : s
Already tried it, until with two combinations of keys but does not work, do not understand: (
I'm having the same exact problem. Early in mornign I flashed a rom with cwm and didnt like it at all. Then I flash the homer v20 with KDZ and now it does not boot, neither the emergency mode works as I install it with that mode.
dude ..remove the battery then press vol down with home and power ..all together until emergency or download mode comes ..if doesnt tri volume up ..if it doesnt then try this ...press volume down with home and power ..the front lights will light for 2 seconds ..just remove finger from home button and still on powe with vol down ..i wish i help you i faced this in my l5 and i think they are the same
hassan216 said:
dude ..remove the battery then press vol down with home and power ..all together until emergency or download mode comes ..if doesnt tri volume up ..if it doesnt then try this ...press volume down with home and power ..the front lights will light for 2 seconds ..just remove finger from home button and still on powe with vol down ..i wish i help you i faced this in my l5 and i think they are the same
Click to expand...
Click to collapse
I already tried all the possible combinations of keys to wake up the smartphone but it does not work neither. That's the bigger problem: (
But thanks anyway for the tip.
there is no solution exists?
Final solution is emergency or download mode. if u can not enter it, u shoud take it to service center as soon as possible
Hello, as the title says I have a full brick, I have tried to testpoint without results, when connecting to the pc install drivers and disconnected after 3 seconds, lgup does not recognize the model, the problem was when installing a custom rom that said the web that was for my cell phone lg k8, I lost the guarantee, what can I do ?.
I've tried everything already and on google I find nothing. Thank you.
I have already researched a bit and the boot.img is the kernel is what I installed, is there no economic way to repair the kernel? a software?
tattoosmistery said:
I have already researched a bit and the boot.img is the kernel is what I installed, is there no economic way to repair the kernel? a software?
Click to expand...
Click to collapse
Well when you install/flash wrong kernel things can get very ugly, or it can refuse to flash in your case it seems like a hard bricked. Did you tried guides for unbricking from this and K10’s forum? Can you access fastboot?
I've been 10 days
Professor Woland said:
Well when you install/flash wrong kernel things can get very ugly, or it can refuse to flash in your case it seems like a hard bricked. Did you tried guides for unbricking from this and K10’s forum? Can you access fastboot?
Click to expand...
Click to collapse
I've been 10 days and all day, I read all the tutorials but all say that I enter fastboot or download mode my cell phone k8 does not react to enter those modes I have tried everything and by software is impossible at least for me , voya try to create a jib usb with 990k resistors that I saw a video on YouTube that explained how to do it if it does not work I will try to talk to a friend who has the octopus to see if it can be fixed since it has support for my model, thanks and Anything that can help me to repair it would be very grateful.
tattoosmistery said:
I've been 10 days and all day, I read all the tutorials but all say that I enter fastboot or download mode my cell phone k8 does not react to enter those modes I have tried everything and by software is impossible at least for me , voya try to create a jib usb with 990k resistors that I saw a video on YouTube that explained how to do it if it does not work I will try to talk to a friend who has the octopus to see if it can be fixed since it has support for my model, thanks and Anything that can help me to repair it would be very grateful.
Click to expand...
Click to collapse
I'm not sure what are talking about here. However can you enter fastboot, how do you mean phone doesn't react?
Professor Woland said:
I'm not sure what are talking about here. However can you enter fastboot, how do you mean phone doesn't react?
Click to expand...
Click to collapse
The mobile does not go in any way with any combination of possible keys, I do not know where the testpoint is, it does not go into the download mode and it does not even leave the logo of lg.
Sorry for my english I use the google translator.
tattoosmistery said:
The mobile does not go in any way with any combination of possible keys, I do not know where the testpoint is, it does not go into the download mode and it does not even leave the logo of lg.
Sorry for my english I use the google translator.
Click to expand...
Click to collapse
So the LG logo appears?
We'll try this :
Press the power key until it gives you vibrate or any sign that phone is going to power on, the press and hold volume down it should give you all black screen with text on bottom saying fastboot mode. If it doesn't try all this but with volume up instead of volume down. I'm not even sure how to enter fastboot since I usually do it from ADB.
Professor Woland said:
So the LG logo appears?
We'll try this :
Press the power key until it gives you vibrate or any sign that phone is going to power on, the press and hold volume down it should give you all black screen with text on bottom saying fastboot mode. If it doesn't try all this but with volume up instead of volume down. I'm not even sure how to enter fastboot since I usually do it from ADB.
Click to expand...
Click to collapse
I already tried all the key combinations and it does not react.Thanks
tattoosmistery said:
I already tried all the key combinations and it does not react.Thanks
Click to expand...
Click to collapse
Well if it's not recognized in any way when turning on then it's hard brick sorry
Is there no program to launch it fastboot directly?
Mine was bricked.
My solution was to enter in download mode, because other modes just rebooted the phone.
So follow this, and luck:
1-you need a PC turned on and the USB cable plugged already
2-quit the battery of the phone
3-now the phone is obviously off, you have to put the battery in WHILE holding volumen up button and then plug the USB still holding that button
It will enter download mode.
If step 3 doesn't work, try the same but with power button held too, with volume up.
Follow this then:
https://www.mylgphones.com/how-to-unbrick-lg-k8-k350-phone-with-lg-up.html
carwave said:
Mine was bricked.
My solution was to enter in download mode, because other modes just rebooted the phone.
So follow this, and luck:
1-you need a PC turned on and the USB cable plugged already
2-quit the battery of the phone
3-now the phone is obviously off, you have to put the battery in WHILE holding volumen up button and then plug the USB still holding that button
It will enter download mode.
If step 3 doesn't work, try the same but with power button held too, with volume up.
Follow this then:
https://www.mylgphones.com/how-to-unbrick-lg-k8-k350-phone-with-lg-up.html
Click to expand...
Click to collapse
It does not Word.
Hi
i bought before 2 weeks Xiaomi a1
it wored very good.
Today while I wanted to turn on the screen it did not respond.
The phone is not responding to any type of pressing.
I must say that the phone is new, did not get any kind of hit , and 5 min before this problem it used to work really good.
I think that the phone is in brick mode, and i can't enter to fastboot option because the phone is not responding....
Pls help my solve this problem.
Thanks
Try holding the pwoer button for more then 10 seconds, that should reset it... once you start it up aghain turn of ambient screen... Gave me troubles too... Hope that helps.
Has that still not been fixed with November update? I turned my ambient screen back on to see. So far, 2 days since update and no black screen after notification.
I'm guessing it's not dead. I have the same problem before as well. It was the buggy Ambient Display. Force restart your phone by pressing power button and holding it more than 10 second. First thing on boot up complete, go to Settings > Display and turn off Ambient Display.
micleftic said:
Try holding the pwoer button for more then 10 seconds, that should reset it... once you start it up aghain turn of ambient screen... Gave me troubles too... Hope that helps.
Click to expand...
Click to collapse
I cant even turn on the screen...
It's not showing any thing on the screen.
I tried to push the power but there is no respond
myself379 said:
I'm guessing it's not dead. I have the same problem before as well. It was the buggy Ambient Display. Force restart your phone by pressing power button and holding it more than 10 second. First thing on boot up complete, go to Settings > Display and turn off Ambient Display.
Click to expand...
Click to collapse
I tried forcing it. But it is still show black screen.
I think it is in brick mode
roy123456 said:
I tried forcing it. But it is still show black screen.
I think it is in brick mode
Click to expand...
Click to collapse
Just go in fastboot mode and reflash the firmware from MIUI.con
jack_21 said:
Just go in fastboot mode and reflash the firmware from MIUI.con
Click to expand...
Click to collapse
How can I enter the fastboot mode?
I cant even turn it on.
It is not respoding.
I tried to put it on this mode but the screen is still black.
roy123456 said:
How can I enter the fastboot mode?
I cant even turn it on.
It is not respoding.
I tried to put it on this mode but the screen is still black.
Click to expand...
Click to collapse
You must keep pressed vol down + power until the phone does show "FASTBOOT"
jack_21 said:
You must keep pressed vol down + power until the phone does show "FASTBOOT"
Click to expand...
Click to collapse
How long?
I tried it for 3 min ...
Is it enough?
roy123456 said:
How long?
I tried it for 3 min ...
Is it enough?
Click to expand...
Click to collapse
Well there is something strange.
Leave the phone discharge
Then let it charge
Then power on with vol down + power
Try these 2 things
1) charge your phone for 2-3 hours. if didnt switch on try this 2
2) Connect your data cable with pc. In mobile Press volume up + volume down and plug in the other end of usb cable to your mobile. you need to hold the keys. this will boot your phone into fastboot.
If boot steps didnt work then it might be a hardware problem or hard brick.
selvarajrajkanna said:
Try these 2 things
1) charge your phone for 2-3 hours. if didnt switch on try this 2
2) Connect your data cable with pc. In mobile Press volume up + volume down and plug in the other end of usb cable to your mobile. you need to hold the keys. this will boot your phone into fastboot.
If boot steps didnt work then it might be a hardware problem or hard brick.
Click to expand...
Click to collapse
What can I do if it is a hard brick?
roy123456 said:
What can I do if it is a hard brick?
Click to expand...
Click to collapse
Visit customer care(they will probably say motherboard problem as always) or try qfil method which is quite complex if this flashing things are new to you.
roy123456 said:
How long?
I tried it for 3 min ...
Is it enough?
Click to expand...
Click to collapse
you should press the power key while charging cable connected.If it doesn't work , unplug the charging usb and plug again reverse(type c's reversibility).If it can't, try with another AC source,another person,another location.
My A1 reborn by my gf's charging adaptor,hand and location.(she know nothing about android hard key combination)
Just thinking,don't know exactly.Sorry for my english.
My was hang.. so I restarted it.. but aftr tht.. phone is not turning on.. its just showing anroid one.. and nothhing else
ruhi maallivk said:
My was hang.. so I restarted it.. but aftr tht.. phone is not turning on.. its just showing anroid one.. and nothhing else
Click to expand...
Click to collapse
reflash phone with stock firmware in fastboot mode on MI FLASH TOOL
selvarajrajkanna said:
Try these 2 things
1) charge your phone for 2-3 hours. if didnt switch on try this 2
2) Connect your data cable with pc. In mobile Press volume up + volume down and plug in the other end of usb cable to your mobile. you need to hold the keys. this will boot your phone into fastboot.
If boot steps didnt work then it might be a hardware problem or hard brick.
Click to expand...
Click to collapse
I need help on urgent basis
I'm using Mi A1 rooted with custom kernel, My phone automatically received august update and it's installed automatically then i try to go in download mode to flash my phone with stock rom but i didn't press volume button properly and it's get restart and automatically start installing august update and i by mistake press power button and now my phone is not turning on even not responding
when i try to connect my phone with pc i can hear the connect sound but it's not going in fast boot
Shivam.S said:
I need help on urgent basis
I'm using Mi A1 rooted with custom kernel, My phone automatically received august update and it's installed automatically then i try to go in download mode to flash my phone with stock rom but i didn't press volume button properly and it's get restart and automatically start installing august update and i by mistake press power button and now my phone is not turning on even not responding
when i try to connect my phone with pc i can hear the connect sound but it's not going in fast boot
Click to expand...
Click to collapse
You switched off the phone in middle of installing ota, best bet is take it to the take it to the service center and tell them phone not switching back on after installing August ota update.
Or if not in warranty then try to install stock rom using qfil.
Unfortunately you have bricked your Mi A1
Shivam.S said:
I need help on urgent basis
I'm using Mi A1 rooted with custom kernel, My phone automatically received august update and it's installed automatically then i try to go in download mode to flash my phone with stock rom but i didn't press volume button properly and it's get restart and automatically start installing august update and i by mistake press power button and now my phone is not turning on even not responding
when i try to connect my phone with pc i can hear the connect sound but it's not going in fast boot
Click to expand...
Click to collapse
You have bricked your Mi A1, when you turned it off while installing/flashing the August update. Basically you should never turn a smartphone off, or disconnect the USB cable (if it is connected), while flashing its ROM.
There are various methods to unbrick it, I suggest you try this one since it's apparently not going into fast boot:
[Experimental]Recover Hard Bricked Xiaomi A1 Using SD Card
Hello everyone. Huawei P9 Lite 2016. It doesn't go into Recovery, nor eRecovery and Fastboot also does not load, in general, not one combination of buttons does not work. I think the system is removed, what should I do? How do I achieve something myself?
Well, if your phone is unable to go into fastboot (hold volume- and plug it into a computer), I have some very bad news for you... What did you do??
marek26340 said:
Well, if your phone is unable to go into fastboot (hold volume- and plug it into a computer), I have some very bad news for you... What did you do??
Click to expand...
Click to collapse
Nothing at all.. It had very strong lags, I couldn't make anything, I restarted it delaying the power button for 10 seconds and so several times, and then made through the buttons hard reset, performed successfully, already turned on but still had so strong lags and now it isn't react at all, just a black screen and the red indicator is constantly on. I think that simply the system has been deleted and it is necessary to write down again, but how, the combination of buttons doesn't work at all
[email protected] said:
Hello everyone. Huawei P9 Lite 2016. It doesn't go into Recovery, nor eRecovery and Fastboot also does not load, in general, not one combination of buttons does not work. I think the system is removed, what should I do? How do I achieve something myself?
Click to expand...
Click to collapse
install Hisuite, then click on recover phone, it will aks you to connect with vol - and power button, you are now in rescue mode, you can flash recover via fastboot
sergio_f said:
install Hisuite, then click on recover phone, it will aks you to connect with vol - and power button, you are now in rescue mode, you can flash recover via fastboot
Click to expand...
Click to collapse
It can't see the phone and the combination of buttons doesn't work at all.
[email protected] said:
It can't see the phone and the combination of buttons doesn't work at all.
Click to expand...
Click to collapse
you dont need to see the phone, see attachments
[email protected] said:
It can't see the phone and the combination of buttons doesn't work at all.
Click to expand...
Click to collapse
im getting error on attachments, 2nd step is press Continue Button
sergio_f said:
im getting error on attachments, 2nd step is press Continue Button
Click to expand...
Click to collapse
Yes, but the sense of that? It's necessary to work with buttons and not one combination of buttons doesn't work. Hisuite asks me to click on the power button and on the volume down button but nothing happens it doesn't go in Fastboot mode or in Recovery nor in eRecovery.
[email protected] said:
Yes, but the sense of that? It's necessary to work with buttons and not one combination of buttons doesn't work. Hisuite asks me to click on the power button and on the volume down button but nothing happens it doesn't go in Fastboot mode or in Recovery nor in eRecovery.
Click to expand...
Click to collapse
press and hold power and vol - , and connect to computer? have you done that?
sergio_f said:
press and hold power and vol - , and connect to computer? have you done that?
Click to expand...
Click to collapse
Yes. It makes nothing. Black screen and red indicator always.
Do you still have warranty on it? If you did not even unlock bootloader, then try to send it in for a warranty repair. Something on the motherboard must have gone bad..
After unlocking my bootloader i just rebooted it to flash twrp. But it did'nt rebooted. While connecting to PC, it show
Qualcomm HS- USB QDLoader - 9008 (COM 8)
i can't reboot or exit edl
please help?
i also tried msm download.
but after 16s it showing "Sahara Communication error"
I had the same thing happen to me with the msm download tool connection. Try to hold down the power button and volume down or up for a good 30 seconds. One of those combinations worked for me to make the device boot. Just a suggestion. Hope it helps.
someone made a USB QDLoader - 9008 tool for PC to flash phone stuck in this mode it's on xda hope that helps it did for lg g5 I flashed a test kernel on
alp47470 said:
After unlocking my bootloader i just rebooted it to flash twrp. But it did'nt rebooted. While connecting to PC, it show
Qualcomm HS- USB QDLoader - 9008 (COM 8)
i can't reboot or exit edl
please help?
i also tried msm download.
but after 16s it showing "Sahara Communication error"
Click to expand...
Click to collapse
Power plus volume up till the phone shuts off then start over. Msm tool does this sometimes to me as well just restart it and the phone.
thanks everyone for their help. I tried the button combination too but it was'nt working.
Something silly worked. I left the phone for hours. The entire battery died. After connecting it just booted again.. its funny.
Now i think i should delete this thread.
I can't wait
alp47470 said:
thanks everyone for their help. I tried the button combination too but it was'nt working.
Something silly worked. I left the phone for hours. The entire battery died. After connecting it just booted again.. its funny.
Now i think i should delete this thread.
Click to expand...
Click to collapse
I had your same problem but my OP6T is fully charged
Are there another solution for exit EFL mode?
Entering fastboot mode.
Same thing happened to me. Just hold the power button + Volume Up & down buttons until it vibrates
ogkillergreen said:
Entering fastboot mode.
Same thing happened to me. Just hold the power button + Volume Up & down buttons until it vibrates
Click to expand...
Click to collapse
Thanks, i exactly press VolUP + PWR button for 30 seconds untill the phone vibrate, if the phone is connected to pc IT DOESN'T WORK
Kratos_01 said:
Thanks, i exactly press VolUP + PWR button for 30 seconds untill the phone vibrate, if the phone is connected to pc IT DOESN'T WORK
Click to expand...
Click to collapse
Unplug the phone and press the PWR button + VOLUP and VolDOWN
Kratos_01 said:
I had your same problem but my OP6T is fully charged
Are there another solution for exit EFL mode?
Click to expand...
Click to collapse
Yes, hold the volume up + power key till it reboots automatically. :good:
this thread saved me today from having to wipe a perfectly working phone.
i booted into msm mode just see if i can use my non oneplus cable to flash phone using msm tool.
the phone showed properly in the msm tool but i didnt want to flash.
so i just read this thread and did what was told.
thanks for not removing this thread.
ogkillergreen said:
Entering fastboot mode.
Same thing happened to me. Just hold the power button + Volume Up & down buttons until it vibrates[/QUOTE
Came here for my OP7 Plus, Couldn't force it to reboot with just Power and Vol -. Had to do both Vol - and Vol + for it to reboot. Just came here to say thanks!
Click to expand...
Click to collapse
I just held the Volume up and Power button. For so long that my fingers were hurting ... lol it worked for me.
Con't exit EDL mode
alp47470 said:
Yes, hold the volume up + power key till it reboots automatically. :good:
Click to expand...
Click to collapse
I have also faced the same problem. I have tried all combination of keys to exit Edl mode without success.
The easiest way is disconnect the USB cable from PC/Laptop, connect the battery in case disconnected and connect to a power cable. Your mobile will start.
se7ensde said:
Power plus volume up till the phone shuts off then start over. Msm tool does this sometimes to me as well just restart it and the phone.
Click to expand...
Click to collapse
I have this problem too on the Oneplus 7T
I tried running adb commands but it says device unauthorized so I tried to use MSM tool but same error, but have to mention that before doing this the phone was taken for a physical LCD replacement, don't know if something was messed up during the replacement
Thank you @Fodderp, this helped me with my OP Nord.
ecompton59 said:
someone made a USB QDLoader - 9008 tool for PC to flash phone stuck in this mode it's on xda hope that helps it did for lg g5 I flashed a test kernel on
Click to expand...
Click to collapse
Where is it?
Kratos_01 said:
I can't wait
I had your same problem but my OP6T is fully charged
Are there another solution for exit EFL mode?
Click to expand...
Click to collapse
I had your same problem but my OP6T HELPPP
ogkillergreen said:
Entering fastboot mode.
Same thing happened to me. Just hold the power button + Volume Up & down buttons until it vibrates
Click to expand...
Click to collapse
i tried this but still no response
lvivek said:
i tried this but still no response
Click to expand...
Click to collapse
How long are you holding before giving up? You gotta hold that for a long time
Also make sure the phone is unplugged from the USB while holding
If there is sill no response it could be a dead battery. Plug it into the wall and let it charge for a while. Then unplug and press power, Vol +, and Vol - and hold it long. When you think it's been too long, keep holding.
It should take you to fastboot