Does anyone know a way to automatically toggle the cellular connection on an LGWS when not connected to phone via BT and off when connected to phone via BT? Hoping this might give me more battery time.
Related
I hav GPRS enable on my phone and at my home i have a WiFi
So when i connect to the internet from my phone when i am at home it always connects using GPRS but i want to connect it through Wifi when i am at home...Is there any optio through which i can select as to how i want to connect to the internet i.e. either by GPRS or Wifi??
Plz help
disconnect your gprs connection just clikc on the Edge Icon on the top bar and then and disconnect the t-mobile data connection and then manually connect to wifi spot and it shouldnt connect through ur gprs until u want it to
If you have WiFi turned on, it'll automatically try to find a network it can connect you and notify you of the best connection. If it doesn't WiFi may not be on, you can check in the Comm Manager to make sure its on. If it is on, you can click the WiFi icon on the top bar and select your network.
The phone will automatically use Wifi instead of GPRS if WiFi is connected. If it tries to connect through GPRS it is either because WiFi is disabled or WiFi isn't connected to a network.
is there anyone using Phoneweaver? a profile switching software.
Does Phoneweaver aotumatically attempt to connect to internet everytime it switches from one profile to another profile?
Why Phoneweaver attempts to connect to internet? seeking updates? sending data?
I realized this that's because everytime Phoneweaver switches from offline to online,an annoying window will pop-up as follows:
cannot connect
dialed
the answering modem has disconnected . To check your connection settings and change them if needed,tap settings.
This means Phoneweaver is attempting to connect to internet,but because the radio has not fully ready (during switching from offline to online),so the internet is not available either, so there is such annoying pop-up.
if auto connection to internet can be set to several seconds later (than radio is ready), this annoying pop-up will be avoided.
NOW THE QUESTION IS: HOW TO TURN OFF THIS AUTO CONNECTION THING?
Due to this I will not use offline profile just to avoid this pop-up window. G-profile has same problem.
My internet connect is fine,I surf internet everyday,so trying to say something about my internet connection settings is probably not the direction.
I have used Phoneweaver on several ROMs and never encountered this issue.
One irritation I have with the HD2 is that it won't automatically connect to my home WiFi when I have been away from the network. I have WiFi set to switch off of it doesn't connect to a network within 1 minute (to conserve battery), but even if I leave WiFi switched on, I have to manually connect to my home network when in range. What I would ideally like is for WiFi to be 'off' when I am away from my network, but automatically switch 'on' and connect, when in range. I don't need to use WiFi when out, so I don't need it to continually search for networks when I am not at home. Does anyone have a solution to this?
So I have WiFi setup at work and it seems to be working, albeit slow but working.
When I plug the phone into the laptop via USB to charge the phone, the wireless connection is no longer available.(START>SETTINGS>CONNECTIONS>WIFI)
However when I unplug the X2 from the micro USB, the icon comes back and I have a wireless connection.
Is there a setting that I need to adjust for USB connection?
Another question:
Before i connect to WiFi I see the E at the top right of the phone. When I connect to WiFi the E is replaced by the WiFi icon. So I am assuming that my E (EDGE) connection is NOT being used at all when WiFi is on?
In other words, when I am using WiFi, is the internet service from my cellular provider, T-Mobil, completely disconnected? And then when I disconnect from WiFi does the phone internet service go back on to T-Mobil?
Thanks,
xwing
For WIfi + USB, i will test it for you tonight at home,
As for Edge and Wifi, yes, when you are connected to wifi, your cellular data connection is not used anymore for internet connection (and actually why do you need it?) However if you connect your phone via USB and allow to use the internet connection from it, your data connection from your Cellular still active. It allows to differentiate the 2 active sync connections, as each connection has its own properties for which items to be synced. so i wonder why Wifi and USB is not...
So now I have had the device for over a week and find that after a while, 2-4 hrs or longer, the WiFi just does not work. I go to settings>connections> WiFi and I am told to enable WiFi on my device. Then there is a list of about 10 different connections to choose from.
The only way to connect to my WiFi is to turn off the phone and back on (waiting at least 2 min) for the phone to load up.
Any suggestions?
Is there a way to keep out tablet connected to phone via bluetooth for internet,but when there are available wifi networks it connects fine,while simultaneously keeping BL Bluetooth connection incase the WiFi disconnected without having the hassle to reconnect manually everytime?
Bluetooth tethering is way more efficient battery consumption wise, but when using public transport their WiFi network is much faster, however Bluetooth tethering stops when you connect to it,so is there a way to keep both connections on, or perhaps an automation to reconnect Bluetooth tether?
Thanks in advance