I was using redmi 3sp and i flashed latest firmwere through twrp it succesfully flashed then i click on reboot to system and mobile screen directly goint to off. I try to on it but it cant boot. Also its not coming on fastboot and recovery mode(i tried many time to press volume up/down+ power button) i connect to into charger but nothing any happen..
After 2days i connect it into pc and nothing any happen then i open mi flash tool and click on refresh button(i tried pressing all three button) then i get like 'COM' name in mi flash tool(see in image) so i confused i disconnect the usb cable and again i connected but device is not showing there
what i do?
pleas help me guys
It's Deep sleep mod
SS Technical said:
I was using redmi 3sp and i flashed latest firmwere through twrp it succesfully flashed then i click on reboot to system and mobile screen directly goint to off. I try to on it but it cant boot. Also its not coming on fastboot and recovery mode(i tried many time to press volume up/down+ power button) i connect to into charger but nothing any happen..
After 2days i connect it into pc and nothing any happen then i open mi flash tool and click on refresh button(i tried pressing all three button) then i get like 'COM' name in mi flash tool(see in image) so i confused i disconnect the usb cable and again i connected but device is not showing there
what i do?
pleas help me guys
Click to expand...
Click to collapse
It happens many times with me it called deep sleep mod
*FIX*
Just hold power button for 2-4 minutes and then your phone will boot up
That's it and reply me
Don't worry it's not a hard brick
Because Redmi 3s is best
[email protected] said:
It happens many times with me it called deep sleep mod
*FIX*
Just hold power button for 2-4 minutes and then your phone will boot up
That's it and reply me
Don't worry it's not a hard brick
Because Redmi 3s is best
Click to expand...
Click to collapse
\
i tried bro but its not work any other solution?
SS Technical said:
\
i tried bro but its not work any other solution?
Click to expand...
Click to collapse
How long you hold power button?
Or remove and replug battery connection
---------- Post added at 10:42 AM ---------- Previous post was at 10:40 AM ----------
SS Technical said:
\
i tried bro but its not work any other solution?
Click to expand...
Click to collapse
Hold button for 6 minutes or above
And check if the power button is not dead
[email protected] said:
How long you hold power button?
Or remove and replug battery connection
---------- Post added at 10:42 AM ---------- Previous post was at 10:40 AM ----------
Hold button for 6 minutes or above
And check if the power button is not dead
Click to expand...
Click to collapse
bro now i am on pc i connected my phone into pc then then i press power button 1min then my phone led glow in blinking red light but i dont know what i exact do now?
sry my english is bad replay fast
SS Technical said:
bro now i am on pc i connected my phone into pc then then i press power button 1min then my phone led glow in blinking red light but i dont know what i exact do now?
sry my english is bad replay fast
Click to expand...
Click to collapse
Red led blinking
Oh lol your phone is not change just put your phone in charge for 20 minutes
I tried to charge night to morning contuniously but nothing any happen bro
SS Technical said:
I tried to charge night to morning contuniously but nothing any happen bro
Click to expand...
Click to collapse
I don't think your phone hard brick remove and replug battery
Is your problem fixed?
If not then message me I'll tell you what to do..
i removed battery connector and replug it then i try to reboot but only led red light blinking there
SS Technical said:
i removed battery connector and replug it then i try to reboot but only led red light blinking there
Click to expand...
Click to collapse
Is it still recognized in PC. Look at device manager. Under the PORT tree. Is it recognized something like Qualcomm 9008 or something?
SS Technical said:
i removed battery connector and replug it then i try to reboot but only led red light blinking there
Click to expand...
Click to collapse
Remove battery connector then reconnect battery don't do anything..
Just see this points in picture use any wire short it not solder just short it using wire or using screwdriver
Then insert your usb cable wait for some seconds you'll see your pc recognized your device port now remove your wire or screwdriver from pins then open mi flash tool flash your fastboot rom your phone will boot normally..
EDL mode pins
bro. pc detect my phone in pc name as COM when i select file and click on flash button after some second its give me hello packet error
Azzkaran said:
Remove battery connector then reconnect battery don't do anything..
Just see this points in picture use any wire short it not solder just short it using wire or using screwdriver
Then insert your usb cable wait for some seconds you'll see your pc recognized your device port now remove your wire or screwdriver from pins then open mi flash tool flash your fastboot rom your phone will boot normally..
Click to expand...
Click to collapse
bro i do this but its detect like qualcomm HS-USB diagnostics 900E (COM20)
pleas help me
SS Technical said:
pleas help me
Click to expand...
Click to collapse
Yes it's right now open mi flash tool select your rom then flash
Azzkaran said:
Yes it's right now open mi flash tool select your rom then flash
Click to expand...
Click to collapse
bro but when i opne mi flash tool and click on refresh button then its nothing detect(show) anything
also i tried reinstalled driver but flash tool nothing show anything
and device manager in port option its show HS-USB diagnostics 900E (COM20)
u can replay me here- [email protected]
bro i tried to change many port but its not detect in mi flash tool and its only show in port option qualcomm HS-USB diagnostics 900E (COM20) pleas help any another method to solve this issue
Related
I've installed Lollipop using fastboot.
now phone is not powering on
No led, No Fastoot.
If any method is working Please reply here
Clear cache
sri.vcmk said:
I've installed Lollipop using fastboot.
now phone is not powering on
No led, No Fastoot.
If any method is working Please reply here
Click to expand...
Click to collapse
Is it going into recovery mode? Try pressing volume up and down key plus power button.
If it goes into recovery then wipe cache and try reboot.
Hope it helps
Relax mate and have a cool look at this great thread -
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
I'm sure if you follow it to the letter, you can easily revive your beloved YU to life again!
No recovery, no fastboot
Reply Guys for this Thread, Very Urgent:crying:
http://forum.xda-developers.com/yureka/help/updated-officle-lollipop-5-0-2-facing-t3085901#post60189727
1manshow said:
Relax mate and have a cool look at this great thread -
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
I'm sure if you follow it to the letter, you can easily revive your beloved YU to life again!
Click to expand...
Click to collapse
i tried this, devices is not detected yet
same here
janajackie said:
i tried this, devices is not detected yet
Click to expand...
Click to collapse
Tried everything mentioned but no luck. Yureka is not detected.
vegetaunleashed said:
Tried everything mentioned but no luck. Yureka is not detected.
Click to expand...
Click to collapse
Then your device is completely hard bricked now noo other option to save it.... Give it to Service center....
djraney said:
Then your device is completely hard bricked now noo other option to save it.... Give it to Service center....
Click to expand...
Click to collapse
Could you go to bootloder (unplug the battery for 5 secs, replug, and connect to PC while pressing Volume UP button)? If you can't, disconnect your YU from PC, unplug the battery again for 5 secs, replug, and connect to PC while pressing the phone power button, then go to Windows' "Device Manager", make a screenshot of it, and post it here.
tirta.agung said:
Could you go to bootloder (unplug the battery for 5 secs, replug, and connect to PC while pressing Volume UP button)? If you can't, disconnect your YU from PC, unplug the battery again for 5 secs, replug, and connect to PC while pressing the phone power button, then go to Windows' "Device Manager", make a screenshot of it, and post it here.
Click to expand...
Click to collapse
No luck tried both ....
i also bricked the device by flashing lollipop fastbot image
what hapened then ? did you replace it or repair it?
Ureka briked
rushic24 said:
what hapened then ? did you replace it or repair it?
Click to expand...
Click to collapse
I am having same problem ,even it is not detected in my laptop? PLs help!!!!!!!!!
Sri.vcmk I totally agree with 1 manshow that guide is really amazing and helpful hopfully it may bring back ur yu from the dead......but u have to give it ur time...i have hard bricked my moto e from that day i learned not to mess with android...system
But xperia z series is awesome as it is brickproof
I own a xperia and i hardbricked it one day but after some research i came to know the sollution jeez....xperia is awesome in it waterproof ness and brickproof ness........!!!!!
If your Moto G is connecting in qhsusb dload and you assume it is bricked then you can try this and see if this work for you as much worked for me.
1- Take apart the phone
2- Unplug the battery from the board
3- Connect to your usb charger
4- You will see a image like on attachment
5- Without disconnect the charger plug the battery to your board and let it charge for a few minutes
6- Flash your phone in order to update your bootloader
Good Luck
Are you saying this is a solution for lollipop hardbricked devices?
sebastiandg7 said:
Are you saying this is a solution for lollipop hardbricked devices?
Click to expand...
Click to collapse
I'm saying that if you have a moto g that is connecting on Qhsusb Dload then you have a new option to try
Connecting trough usb without battery does not give any life on the screen... Just black..
dwensch said:
Connecting trough usb without battery does not give any life on the screen... Just black..
Click to expand...
Click to collapse
does your phone connect on qhsusb?, how your phone get on that mode?
Any workaround for enter to bootloader (fastboot) with the volume button (-) broken?
I had a bootloop and I can't turn it off, keep rebooting when I keep the power off pressed... I like to enter to fastboot, and then launch a custom recovery
abeloman said:
Any workaround for enter to bootloader (fastboot) with the volume button (-) broken?
I had a bootloop and I can't turn it off, keep rebooting when I keep the power off pressed... I like to enter to fastboot, and then launch a custom recovery
Click to expand...
Click to collapse
With twrp you can reboot to bootloader!
Sent from my XT1032 using Tapatalk
Xup8 said:
With twrp you can reboot to bootloader!
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
Yeah, but how access to twrp when my phone is turned off? If I press the power button, it goes to bootloop and then, I can't do anything because the broken button... I have to remove the battery to get out the bootloop (otherwise I have to wait battery discharge)
abeloman said:
Yeah, but how access to twrp when my phone is turned off? If I press the power button, it goes to bootloop and then, I can't do anything because the broken button... I have to remove the battery to get out the bootloop (otherwise I have to wait battery discharge)
Click to expand...
Click to collapse
using adb on your pc
adb reboot-recovery
Before i even attempt to do it, how did you end up with QHS-USB mode in phone?
Was it because of bad OTA or something else?
does this work? can anyone confirm?
sebastiandg7 said:
Are you saying this is a solution for lollipop hardbricked devices?
Click to expand...
Click to collapse
Im pretty sure, this is no help for hardbricked phones. https://www.youtube.com/watch?v=qZhAabwi24M
In this video, he did the same, but it wont help, when you have a hardbrick
dwensch said:
Connecting trough usb without battery does not give any life on the screen... Just black..
Click to expand...
Click to collapse
just connect your mobile to wall charger...
---------- Post added at 07:39 AM ---------- Previous post was at 07:37 AM ----------
juancollado2003 said:
If your Moto G is connecting in qhsusb dload and you assume it is bricked then you can try this and see if this work for you as much worked for me.
1- Take apart the phone
2- Unplug the battery from the board
3- Connect to your usb charger
4- You will see a image like on attachment
5- Without disconnect the charger plug the battery to your board and let it charge for a few minutes
6- Flash your phone in order to update your bootloader
Good Luck
Click to expand...
Click to collapse
you are telling us that we can't flash blank because of this?
&
what is the bootloader version of your MOTO G aka Falcon ?
Hello,
I need your help.
I have flashed the Huawei P8 Lite with the original update.app from Huawei Site.
I create an flashable zip via Huawei Update Extractor.
I get an Error with \system could not hang in or something like that.
Then I deleted the cache and starts a reboot.
Now the LED is blinking red, green, green, red.
I cant go in Recovery Mode or something else.
It doesnt start.
Can you help me?
Sorry for my bad english.
ChrisNowa said:
Hello,
I need your help.
I have flashed the Huawei P8 Lite with the original update.app from Huawei Site.
I create an flashable zip via Huawei Update Extractor.
I get an Error with \system could not hang in or something like that.
Then I deleted the cache and starts a reboot.
Now the LED is blinking red, green, green, red.
I cant go in Recovery Mode or something else.
It doesnt start.
Can you help me?
Sorry for my bad english.
Click to expand...
Click to collapse
Hold the power button and volume up...
When you feel vibration and see huawei logo just release power button and not volume up .....After entering recovery do what you want to
HaiderHady said:
Hold the power button and volume up...
When you feel vibration and see huawei logo just release power button and not volume up .....After entering recovery do what you want to
Click to expand...
Click to collapse
Thanks for your Quick Answer. How long do you think should i push the Buttons. I have tried it one minute and it only blinks .
ChrisNowa said:
Thanks for your Quick Answer. How long do you think should i push the Buttons. I have tried it one minute and it only blinks .
Click to expand...
Click to collapse
Took me 12 seconds ..... May be you have a different problem.... Will try to figure out
HaiderHady said:
Took me 12 seconds ..... May be you have a different problem.... Will try to figure out
Click to expand...
Click to collapse
I have tried it again. After 1 Minute still no reaction
@ChrisNowa Try to hold the volume up or down until the led goes off then press and hold power until screen goes black and quickly release power then press and hold volume up until huawei logo appears
Translated with Google
Had times the same problem.
It was a total loss.
Have brought it to the repair and the circuit board was shaken.
Greeting Wolfgang (Deutchland)
I have the same problem, anyone found a solution?
Zelych said:
I have the same problem, anyone found a solution?
Click to expand...
Click to collapse
Tried to disconnect battery? Then bootloader and recovery should work
Wolf1953 said:
Translated with Google
Had times the same problem.
It was a total loss.
Have brought it to the repair and the circuit board was shaken.
Greeting Wolfgang (Deutchland)
Click to expand...
Click to collapse
They did charged you to make that change? or just took it for warranty?
Translated with Google
It was a guarantee. Repair without warranty is not worth it, is too expensive.
lincer556 said:
They did charged you to make that change? or just took it for warranty?
Click to expand...
Click to collapse
I put the phone on a claim in the warranty period, and the motherboard was changed. The repair was free of charge under the warranty.
Odesláno z mého SM-N910F pomocí Tapatalk
SAME HERE. Does any1 have suggestions how to fix it? thanks.
ChrisNowa said:
Hello,
I need your help.
I have flashed the Huawei P8 Lite with the original update.app from Huawei Site.
I create an flashable zip via Huawei Update Extractor.
I get an Error with \system could not hang in or something like that.
Then I deleted the cache and starts a reboot.
Now the LED is blinking red, green, green, red.
I cant go in Recovery Mode or something else.
It doesnt start.
Can you help me?
Sorry for my bad english.
Click to expand...
Click to collapse
Connect to USB Install and run HiSuite Power off phone and Press Volume down and power button same time, you will enter in Fastboot, then flash system IMG! Done!
RootingPro-18 said:
Connect to USB Install and run HiSuite Power off phone and Press Volume down and power button same time, you will enter in Fastboot, then flash system IMG! Done!
Click to expand...
Click to collapse
nothing just blinking red green green red and when it stops blink (dead phone) pc play disconnect sound..
Audriuskins said:
Tried to disconnect battery? Then bootloader and recovery should work
Click to expand...
Click to collapse
I have also did a flash with a zip creation of the "HuaweiUpdateExtractor" and now my phone is dead.
red green green red green green code.
I have disconnected the battery without succes
My pc detects the phone for a short time and disconnect it after a while.
Hisuite don't detect de p8lite.
Is there still hope
PeJe80 said:
I have also did a flash with a zip creation of the "HuaweiUpdateExtractor" and now my phone is dead.
red green green red green green code.
I have disconnected the battery without succes
My pc detects the phone for a short time and disconnect it after a while.
Hisuite don't detect de p8lite.
Is there still hope
Click to expand...
Click to collapse
If You don't have access to fastboot there is no hope for recovery! Sorry
RootingPro-18 said:
If You don't have access to fastboot there is no hope for recovery! Sorry
Click to expand...
Click to collapse
Ahh... After connecting to pc, i can hear sound of connecting phone to pc, but after nofication lights turn off, sounds disconnecting
VdBBc said:
Ahh... After connecting to pc, i can hear sound of connecting phone to pc, but after nofication lights turn off, sounds disconnecting
Click to expand...
Click to collapse
Try this! Plug phone to PC and fast press volume down and power it should start, if you can't do that then try to power on phone!
I had the same issue with an Honor 6 Plus once. Spent months trying to fix it and gave up. Never found out the solution to this day ? Bought a replacement battery also ?
It seems i have bricked a Le Pro 3 x727 trying to booting to a custom Rom. The screen is always off, no info no matters what. I have tried everything but it only vibrates. I have tried the vol +, vol- and power keys but it only vibrates and my PC doesn't recognize anything :/
What can I do? I'm missing something? I'm on Windows 10 BTW...
Thanks in advance!
edgarborras94 said:
It seems i have bricked a Le Pro 3 x727 trying to booting to a custom Rom. The screen is always off, no info no matters what. I have tried everything but it only vibrates. I have tried the vol +, vol- and power keys but it only vibrates and my PC doesn't recognize anything :/
What can I do? I'm missing something? I'm on Windows 10 BTW...
Thanks in advance!
Click to expand...
Click to collapse
Press power button 2 minutes or longer, sometime the phone will come alive I did it couple of times before.
If not work try this tread:
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
What happened what did you flash?
Sent from my LEX727 using xda premium
I have flashed an aboot file i found in this forum. But unfortunately i doesnt show anything in screen and my pc doesnt recognize it in any way...
No flashboot mode, no recovery and no edl mode...
It only vibrates no matter what combination of keys i press
Thanks!!
edgarborras94 said:
I have flashed an aboot file i found in this forum. But unfortunately i doesnt show anything in screen and my pc doesnt recognize it in any way...
No flashboot mode, no recovery and no edl mode...
It only vibrates no matter what combination of keys i press
Thanks!!
Click to expand...
Click to collapse
Volum + and - and power button go in the qfil mode
And go in this thread
https://forum.xda-developers.com/le-pro3/how-to/guide-unbrick-le-pro3-tested-t3622340
venezolano69 said:
Volum + and - and power button go in the qfil mode
And go in this thread
https://forum.xda-developers.com/le-pro3/how-to/guide-unbrick-le-pro3-tested-t3622340
Click to expand...
Click to collapse
Okey, now the phone has a red led steady when is plugged, so it's the first difference between yesterday, I'm charging it and then i will try to enter qfil mode... btw, my pc doesn't recognize my phone in any way... should the qfil show something in the phone screen?
Thank you very much!
edgarborras94 said:
Okey, now the phone has a red led steady when is plugged, so it's the first difference between yesterday, I'm charging it and then i will try to enter qfil mode... btw, my pc doesn't recognize my phone in any way... should the qfil show something in the phone screen?
Thank you very much!
Click to expand...
Click to collapse
You have to install Qualcomm driver to recognize the phone
https://forum.xda-developers.com/le-pro3/help/le-pro3-bricked-fastboot-recovery-t3487259
venezolano69 said:
You have to install Qualcomm driver to recognize the phone
https://forum.xda-developers.com/le-pro3/help/le-pro3-bricked-fastboot-recovery-t3487259
Click to expand...
Click to collapse
:good:
Hi all!
First, english is not fluent for me, so excuse me for grammatical/temporal mistakes in my words.
It is now 12 days I am with my A1 phone bricked. It's bricked because I try to relock my phone with TWRP installed for making an OTA update.... I shouldn't, I know that now. My phone didn't wanted to boot, only on fastboot mode. But I couldn't flash anything because my bootloader seems to be locked now.
I disable the driver enforcement signature, installed the qualcomm drivers, open my phone and use the tespoints method. And my phone boot and this EDL mode 9008, and miflash tool saw it on COMxx and I was able to flash the fastboot july release. I was so happy! :laugh: But, then, the phone now stay in black screen mode :crying: If I plug an USB cable for charge or on PC, the white led blink 3 times. I tried to push the power button during a few minutes, I tried to push power and volume up, power with volume down, power with volume up and down. I tried to reflash 3 times in miflash, everytimes it's a success flash, but I'm still stuck on that black screen mode. I don't know how to exit or if my phone is dead. I tried several USB port and cable too, that doesn't change anything.
Does anyone have any idea how i can exit this annoying black screen blinking white led mode? Or my phone is definitly dead? I searched but I didn't find a solution that works for my phone.
eljulien said:
Hi all!
First, english is not fluent for me, so excuse me for grammatical/temporal mistakes in my words.
It is now 12 days I am with my A1 phone bricked. It's bricked because I try to relock my phone with TWRP installed for making an OTA update.... I shouldn't, I know that now. My phone didn't wanted to boot, only on fastboot mode. But I couldn't flash anything because my bootloader seems to be locked now.
I disable the driver enforcement signature, installed the qualcomm drivers, open my phone and use the tespoints method. And my phone boot and this EDL mode 9008, and miflash tool saw it on COMxx and I was able to flash the fastboot july release. I was so happy! :laugh: But, then, the phone now stay in black screen mode :crying: If I plug an USB cable for charge or on PC, the white led blink 3 times. I tried to push the power button during a few minutes, I tried to push power and volume up, power with volume down, power with volume up and down. I tried to reflash 3 times in miflash, everytimes it's a success flash, but I'm still stuck on that black screen mode. I don't know how to exit or if my phone is dead. I tried several USB port and cable too, that doesn't change anything.
Does anyone have any idea how i can exit this annoying black screen blinking white led mode? Or my phone is definitly dead? I searched but I didn't find a solution that works for my phone.
Click to expand...
Click to collapse
Push and keep power button until your phone will restart
mar.ur said:
Push and keep power button until your phone will restart
Click to expand...
Click to collapse
I already tried that during 3-4 minutes. How long do I need to push it?
eljulien said:
I already tried that during 3-4 minutes. How long do I need to push it?
Click to expand...
Click to collapse
About 10 s . Try to push volume down and power button together and keep untill restart to fastboot
If doesn't work it can mean that power button has broken when you was opening the phone .
Well, I don't think it's the power button broken because if I plug the phone for charging, the led blink. If I disconnected the phone from charge and push the power button for 10s or more, nothing happen. If I put the phone and charge, start to push the power button then unplug the charge cable with power button still pushing it blinks 3 times after unplugged, then nothing. It's a small difference, but still a little reaction so I don't think the power button is the problem, but I'm not sure of that
eljulien said:
Well, I don't think it's the power button broken because if I plug the phone for charging, the led blink. If I disconnected the phone from charge and push the power button for 10s or more, nothing happen. If I put the phone and charge, start to push the power button then unplug the charge cable with power button still pushing it blinks 3 times after unplugged, then nothing. It's a small difference, but still a little reaction so I don't think the power button is the problem, but I'm not sure of that
Click to expand...
Click to collapse
When you connect phone with pc check what recognize in device manager . You can be in qdlooader 9008 or in diagnostic e900 . Always check what is in device manager after connect phone with pc . You will be know in which state is your phone . I don't know if your phone is in edl mode .
try holding on the power button and volume UP (not down) buttons for 10 secs and it should restart, I got into the same problem as u and that is what fixed it for me
if that doesnt work here is a link to a post with a guy that has the same problem: https://forum.xda-developers.com/mi-a1/help/black-screen-xiaomi-mi-a1-reboot-power-t3728497
If I connect the phone to the computer, it shows nothing. I have to bridge the tespoints to make it appears, and then it appears in Qualcomm HS-USB QDLoader9008 (COM10). And then I can flash with miflash and miflash tells me that it's a success.
I have exactly the same problem. Looking for a solution for weeks now. Tried everything that is on the net but still black screen
daveve said:
I have exactly the same problem. Looking for a solution for weeks now. Tried everything that is on the net but still black screen
Click to expand...
Click to collapse
Sorry to read that but I think our phones are dead honestly. I don't see what to try to make it rise from the shadows of this black screen At least, I learn how to go in EDL mode and never relock bootloader with custom recovery. It's an expensive lesson but...
Thanks to you guys for answering and helping me
what is android virson????
rawnel said:
what is android virson????
Click to expand...
Click to collapse
Android 8.1 july patch was installed via EDL mode with miflash tool.
eljulien said:
Android 8.1 july patch was installed via EDL mode with miflash tool.
Click to expand...
Click to collapse
The same thing happens to you. Could you solve it ??
I was in the same situation until i flashef nougat,.
---------- Post added at 12:35 PM ---------- Previous post was at 12:30 PM ----------
I was in the same situation until i flashed nougat,.
---------- Post added at 12:35 PM ---------- Previous post was at 12:35 PM ----------
I was in the same situation until i flashed nougat,.
ccalixtro said:
I was in the same situation until i flashef nougat,.
---------- Post added at 12:35 PM ---------- Previous post was at 12:30 PM ----------
I was in the same situation until i flashed nougat,.
---------- Post added at 12:35 PM ---------- Previous post was at 12:35 PM ----------
I was in the same situation until i flashed nougat,.
Click to expand...
Click to collapse
Also try to flash to Nougat and the problem is not fixed, the vibration is more intermittent only. Thanks for the input.
Enviado desde mi GT-I9505 mediante Tapatalk
XuFLeS said:
Also try to flash to Nougat and the problem is not fixed, the vibration is more intermittent only. Thanks for the input.
Enviado desde mi GT-I9505 mediante Tapatalk
Click to expand...
Click to collapse
same porblem