Database Users

[Q] LG G2 (rooted) bricked after OTA update

Hi guys,
i have a G2 D802 rooted with TWRP recovery. My brother did accidentily the OTA update. After that my LG had a bootloop TRWP.
Nothing was working, then suddenly it went black . No Screen, no battery light while charging, no recog from computer, no adb, nothing when i plug it onto the Computer. i searched tons of forums and threads , i used every method, but my phone does not do anything
Several threads are for phones with working ADB or anything working , mine isn't working at all .
What can i do ? i can't bring it to the LG shop because they told me it was rooted and rooted phones have no guarantee in our country.
Please folks does anybody had have the same problem ??

fas2802 said:
Hi guys,
i have a G2 D802 rooted with TWRP recovery. My brother did accidentily the OTA update. After that my LG had a bootloop TRWP.
Nothing was working, then suddenly it went black . No Screen, no battery light while charging, no recog from computer, no adb, nothing when i plug it onto the Computer. i searched tons of forums and threads , i used every method, but my phone does not do anything
Several threads are for phones with working ADB or anything working , mine isn't working at all .
What can i do ? i can't bring it to the LG shop because they told me it was rooted and rooted phones have no guarantee in our country.
Please folks does anybody had have the same problem ??
Click to expand...
Click to collapse
To Get ADB Working try this - http://forum.xda-developers.com/showpost.php?p=48361867&postcount=68
The OP of that thread and one additional (and similar) command found later in the thread fixed up my recovery bootloop.

CxanDroid said:
To Get ADB Working try this - http://forum.xda-developers.com/showpost.php?p=48361867&postcount=68
The OP of that thread and one additional (and similar) command found later in the thread fixed up my recovery bootloop.
Click to expand...
Click to collapse
Just 1 question where can you download "LGE Mobile Sooner Single ADB Interface" and other ADB files for G2? Tnx

battlereactiionz said:
Just 1 question where can you download "LGE Mobile Sooner Single ADB Interface" and other ADB files for G2? Tnx
Click to expand...
Click to collapse
Looks like it's part of the LG mobile driver package.
Good Luck.

TDSJR said:
Looks like it's part of the LG mobile driver package.
Good Luck.
Click to expand...
Click to collapse
hmm, nope i cannot see it in pack

Have you tried to get to power mode? Press Volume Up & and then plug in the usb cable (enter to a download mode). And flash back to stock.
Skickat från min LG-D802 via Tapatalk

Robban said:
Have you tried to get to power mode? Press Volume Up & and then plug in the usb cable (enter to a download mode). And flash back to stock.
Skickat från min LG-D802 via Tapatalk
Click to expand...
Click to collapse
for me it doesnt work at all... i cant acces download mode, twrp so im stuck in LG logo afterwards black screen

battlereactiionz said:
for me it doesnt work at all... i cant acces download mode, twrp so im stuck in LG logo afterwards black screen
Click to expand...
Click to collapse
turn your phone completely off: unplug it from the usb and hold down the power button for like 20sec. the phone should not be turning on or doing anything. then press and hold the power plus volume down. as soon as the lg logo pops up, let go of those 2 buttons and immediately press and hold power + volume down again. this should being up an all white screen with black letters. now press the power button 3 times til you get to "factory resetting". this should boot you into twrp. from there you can do whatever you want. this time do not take the OTA. hehe.
the drivers for your phone will be on lg's g2 site. make sure you've installed those with your phone unplugged from usb. if you have a previous driver installation, uninstall that. the lg drivers have the adb driver inside of it. also make sure you are using the most up to date adb.exe. if not then it may not be able to communicate with your phone. you can get that from android's sdk.

freebee269 said:
turn your phone completely off: unplug it from the usb and hold down the power button for like 20sec. the phone should not be turning on or doing anything. then press and hold the power plus volume down. as soon as the lg logo pops up, let go of those 2 buttons and immediately press and hold power + volume down again. this should being up an all white screen with black letters. now press the power button 3 times til you get to "factory resetting". this should boot you into twrp. from there you can do whatever you want. this time do not take the OTA. hehe.
the drivers for your phone will be on lg's g2 site. make sure you've installed those with your phone unplugged from usb. if you have a previous driver installation, uninstall that. the lg drivers have the adb driver inside of it. also make sure you are using the most up to date adb.exe. if not then it may not be able to communicate with your phone. you can get that from android's sdk.
Click to expand...
Click to collapse
the hard reset writes the same text on the top corner.. i really dont know how to fix the problem i have allready posted a new thread but noone responded ;(

The fact that you see anything, is a good thing. Let battery completely die, and then plug into USB while booting to download mode. I had VERY similar issue and that's worked for me, then flashed to stock.
Sent from my g2 using xda app-developers app

With your phone on, and in recovery (twrp), plug it into your computer.
Open device manager.
Look for a disabled/uninstalled (marked with yellow) device that corresponds to tour device (in my case all it said was D800).
Choose properties/driver/update driver.
From here, you have to choose all the manual options ("let me choose the driver to install"), not automatic, .
Finally Windows should show you a list of device drivers compatible with your device.
choose the LGE (or androidnet) Single Sooner ADB ...
Let it install
Test your ADB interface (ADB Devices).

TDSJR said:
The fact that you see anything, is a good thing. Let battery completely die, and then plug into USB while booting to download mode. I had VERY similar issue and that's worked for me, then flashed to stock.
Sent from my g2 using xda app-developers app
Click to expand...
Click to collapse
Do you think it will solve the problem? the only thing i need to do is to boot it in android.. i think the twrp img. was corrupted and becouse of that it doesnt work..
---------- Post added at 04:32 PM ---------- Previous post was at 04:14 PM ----------
CxanDroid said:
With your phone on, and in recovery (twrp), plug it into your computer.
Open device manager.
Look for a disabled/uninstalled (marked with yellow) device that corresponds to tour device (in my case all it said was D800).
Choose properties/driver/update driver.
From here, you have to choose all the manual options ("let me choose the driver to install"), not automatic, .
Finally Windows should show you a list of device drivers compatible with your device.
choose the LGE (or androidnet) Single Sooner ADB ...
Let it install
Test your ADB interface (ADB Devices).
Click to expand...
Click to collapse
i cannot access the twrp

battlereactiionz said:
Do you think it will solve the problem? the only thing i need to do is to boot it in android.. i think the twrp img. was corrupted and becouse of that it doesnt work..
Click to expand...
Click to collapse
Sounds identical to the problem I had. It's like a REAL slow bootloop. If you catch it just right, can you get it to factory reset? And then from there, it just does the same thing?

Ooops.
I saw bootloop twrp.
I missed the black screen.
What do you get when you hold the power button for longer than 15 seconds (force shutdown), then power it back on (hold power for a few seconds, then release)?
If you have a fully non-booting device, warranty it, of course blame it on the update.

CxanDroid said:
Ooops.
I saw bootloop twrp.
I missed the black screen.
What do you get when you hold the power button for longer than 15 seconds (force shutdown), then power it back on (hold power for a few seconds, then release)?
If you have a fully non-booting device, warranty it, of course blame it on the update.
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=fNQd4SR69-c this is what happens... if i wont be able to fix it i will have to take it to lg servis, but it will take long.

battlereactiionz said:
http://www.youtube.com/watch?v=fNQd4SR69-c this is what happens... if i wont be able to fix it i will have to take it to lg servis, but it will take long.
Click to expand...
Click to collapse
turn the phone completely off. unplug it from the usb/charger. while the phone is off, hold down volume up then plug in the usb/charger. you should automatically see download mode pop up. if that happens then you can return back to stock by googling howto's. if not then you will have to take it in.

no devices when you plug it into computer in that state?
Hopefully none of that text at the top of the screen mentions root or modified system.

freebee269 said:
turn the phone completely off. unplug it from the usb/charger. while the phone is off, hold down volume up then plug in the usb/charger. you should automatically see download mode pop up. if that happens then you can return back to stock by googling howto's. if not then you will have to take it in.
Click to expand...
Click to collapse
nope it didnt work.. same thing again

battlereactiionz said:
nope it didnt work.. same thing again
Click to expand...
Click to collapse
well now you know what you have to do. sorry about the bad news.

Had thesame problem
Sent from my HTCSensation using xda app-developers app

[Urgent] Hard bricked yureka while updating to lollipop

I've installed Lollipop using fastboot.
now phone is not powering on
No led, No Fastoot.
If any method is working Please reply here

Clear cache
sri.vcmk said:
I've installed Lollipop using fastboot.
now phone is not powering on
No led, No Fastoot.
If any method is working Please reply here
Click to expand...
Click to collapse
Is it going into recovery mode? Try pressing volume up and down key plus power button.
If it goes into recovery then wipe cache and try reboot.
Hope it helps

Relax mate and have a cool look at this great thread -
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
I'm sure if you follow it to the letter, you can easily revive your beloved YU to life again!

No recovery, no fastboot

Reply Guys for this Thread, Very Urgent:crying:
http://forum.xda-developers.com/yureka/help/updated-officle-lollipop-5-0-2-facing-t3085901#post60189727

1manshow said:
Relax mate and have a cool look at this great thread -
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
I'm sure if you follow it to the letter, you can easily revive your beloved YU to life again!
Click to expand...
Click to collapse
i tried this, devices is not detected yet

same here
janajackie said:
i tried this, devices is not detected yet
Click to expand...
Click to collapse
Tried everything mentioned but no luck. Yureka is not detected.

vegetaunleashed said:
Tried everything mentioned but no luck. Yureka is not detected.
Click to expand...
Click to collapse
Then your device is completely hard bricked now noo other option to save it.... Give it to Service center....

djraney said:
Then your device is completely hard bricked now noo other option to save it.... Give it to Service center....
Click to expand...
Click to collapse
Could you go to bootloder (unplug the battery for 5 secs, replug, and connect to PC while pressing Volume UP button)? If you can't, disconnect your YU from PC, unplug the battery again for 5 secs, replug, and connect to PC while pressing the phone power button, then go to Windows' "Device Manager", make a screenshot of it, and post it here.

tirta.agung said:
Could you go to bootloder (unplug the battery for 5 secs, replug, and connect to PC while pressing Volume UP button)? If you can't, disconnect your YU from PC, unplug the battery again for 5 secs, replug, and connect to PC while pressing the phone power button, then go to Windows' "Device Manager", make a screenshot of it, and post it here.
Click to expand...
Click to collapse
No luck tried both ....
i also bricked the device by flashing lollipop fastbot image

what hapened then ? did you replace it or repair it?

Ureka briked
rushic24 said:
what hapened then ? did you replace it or repair it?
Click to expand...
Click to collapse
I am having same problem ,even it is not detected in my laptop? PLs help!!!!!!!!!

Sri.vcmk I totally agree with 1 manshow that guide is really amazing and helpful hopfully it may bring back ur yu from the dead......but u have to give it ur time...i have hard bricked my moto e from that day i learned not to mess with android...system
But xperia z series is awesome as it is brickproof
I own a xperia and i hardbricked it one day but after some research i came to know the sollution jeez....xperia is awesome in it waterproof ness and brickproof ness........!!!!!

Totaly Dead

Hi my senior... i want to ask... i have restore my stock rom in my hm13 and i've connect charge because the battery is low after restoring... the problem is here after 2 hours i charged, my device is get totaly dead/hardbrick... i trying to fastboot mode and its not response... trying remove my battery and try to recovery mode, there is no response... what is happening to my redmi2?? Please leave a reply my senior,, sorry for my bad english...

first charge ur battery min 50% somehow.then try to go into recovery or fastboot mode..and check ur mobile now supports offline charging means charging in switch off mode...

Remove the battery then Put it again...press volume down and power button there will be a small vibration...dont worry u will be in fastboot mode just with blank screen...connect it to laptop or pc...fastboot flash the phone fully and it will restart with a living redmi 2...happened to me while restoring... I did the same method and it worked... I was in Trouble too...
I hope it works for u...good luck

Riyanx55tu said:
Remove the battery then Put it again...press volume down and power button there will be a small vibration...dont worry u will be in fastboot mode just with blank screen...connect it to laptop or pc...fastboot flash the phone fully and it will restart with a living redmi 2...happened to me while restoring... I did the same method and it worked... I was in Trouble too...
I hope it works for u...good luck
Click to expand...
Click to collapse
I already try that method... and the result is nothing... my device still dead... trying to connect charger and there is nothing vibrate.. fastboot mode is not worked

uralok said:
first charge ur battery min 50% somehow.then try to go into recovery or fastboot mode..and check ur mobile now supports offline charging means charging in switch off mode...
Click to expand...
Click to collapse
The problem is recovery and fastboot is not warked... i try check the battery and the battery is good... pressing volume down+power and there is no vibrate

Exo721 said:
The problem is recovery and fastboot is not warked... i try check the battery and the battery is good... pressing volume down+power and there is no vibrate
Click to expand...
Click to collapse
so now you are able to use ur recovery????

uralok said:
so now you are able to use ur recovery????
Click to expand...
Click to collapse
No i can't... recovery mode still not working...

then follow this this may help u http://en.miui.com/thread-382180-1-1.html

I think u need to reset the bootloader...there is a separate usb cable to reset the bootloader... Check that out in YouTube... It might be named USB Jig.

May be hardcore solution. here.

P9 Lite VNS-L31 bootloop, no recovery, no twrp , no bootloader

hello,
after install some rom, my p9 lite get bootloop. I manage to enter fastboot but phone was locked, so to install twrp i unlocked it.
After unlock i can't enter fastboot.
Screen "your devices has been unlocked and can't be trusted" appears, vol up+- power, nothing happens phone vibe 2 times and back to screen "your devices...".
My bootloader is unlock, can i flash twrp without bootloader screen on phone ? My phone is connected to PC but no device detected. Maybe at linux i can do something more than windows ?
Maybe i need to go to fastboot some different way ? i try to push 3 button after fist vibe and 2nd. Nothing work for me :crying:
i tried to past b130 to sd card in dload, vol+- power, nothing not even update screen, same "your devices"....,
now downloading b151

dragon218 said:
hello,
after install some rom, my p9 lite get bootloop. I manage to enter fastboot but phone was locked, so to install twrp i unlocked it.
After unlock i can't enter fastboot.
Screen "your devices has been unlocked and can't be trusted" appears, vol up+- power, nothing happens phone vibe 2 times and back to screen "your devices...".
My bootloader is unlock, can i flash twrp without bootloader screen on phone ? My phone is connected to PC but no device detected. Maybe at linux i can do something more than windows ?
Maybe i need to go to fastboot some different way ? i try to push 3 button after fist vibe and 2nd. Nothing work for me :crying:
i tried to past b130 to sd card in dload, vol+- power, nothing not even update screen, same "your devices"....,
now downloading b151
Click to expand...
Click to collapse
For fastbooting u need to use volume down and power in the same time and the phone needs to be connected to PC, and for entering to recovery u only need to press volume up and power key.

robi10101298 said:
For fastbooting u need to use volume down and power in the same time and the phone needs to be connected to PC, and for entering to recovery u only need to press volume up and power key.
Click to expand...
Click to collapse
phone is connected to pc. screen is on "your device..." i push vol down + power. screen going black vibe 2 times, 1 sec huawei logo and back to "your device..". I don't know why after unlock phone i can't go to fastboot
i it possible to erase fastboot ??!!

dragon218 said:
phone is connected to pc. screen is on "your device..." i push vol down + power. screen going black vibe 2 times, 1 sec huawei logo and back to "your device..". I don't know why after unlock phone i can't go to fastboot
Click to expand...
Click to collapse
Disconnect the phone from PC. Make sure it's powered off. Plug in USB cable at the same time while holding volume down.

zgomot said:
Disconnect the phone from PC. Make sure it's powered off. Plug in USB cable at the same time while holding volume down.
Click to expand...
Click to collapse
don't work, after power on still going to "your devices". Even change pc and usb cable
I can belived that i can open fastboot when phone was lock, after unlock fastboot vanished
dc-phoenix can help if pc dont see device ?

dragon218 said:
don't work, after power on still going to "your devices". Even change pc and usb cable
I can belived that i can open fastboot when phone was lock, after unlock fastboot vanished
dc-phoenix can help if pc dont see device ?
Click to expand...
Click to collapse
Don't work, after power on......why power on?
Disconnect from PC. Power of the phone.
Press and hold only vol down, with pressing vol down connect with PC. Device should be start on fastboot mode.
Sent from my NEM-L21 using Tapatalk

Anonda said:
Don't work, after power on......why power on?
Disconnect from PC. Power of the phone.
Press and hold only vol down, with pressing vol down connect with PC. Device should be start on fastboot mode.
Sent from my NEM-L21 using Tapatalk
Click to expand...
Click to collapse
in 5 min i will send video i think i'm doing everything right
if u can look at it
http://sendvid.com/svihvenb

No compatible source was found this video
Sent from my NEM-L21 using Tapatalk

Anonda said:
No compatible source was found this video
Sent from my NEM-L21 using Tapatalk
Click to expand...
Click to collapse
try this from yt
https://youtu.be/K36zMsaP4As

try putting update.app file into dload folder on your sdcard and updating via three button method.

sirjohnrl said:
try putting update.app file into dload folder on your sdcard and updating via three button method.
Click to expand...
Click to collapse
Try with b130 and b161 for region c432 nothing happened. 2 days ago i change region from c185 to c432 now i think maybe i need to past c185b161 to work ?
update doesn't start either, losing hope some one have any other ideas ?

dragon218 said:
try this from yt
https://youtu.be/K36zMsaP4As
Click to expand...
Click to collapse
On the starting, your phone is on.
Then you shutdown? How?
After power off
Press and hold only vol down, connect with pc.
Hi suit installed on your PC?
Sent from my NEM-L21 using Tapatalk

Anonda said:
On the starting, your phone is on.
Then you shutdown? How?
After power off
Press and hold only vol down, connect with pc.
Hi suit installed on your PC?
Sent from my NEM-L21 using Tapatalk
Click to expand...
Click to collapse
i hold power button, if phone isn't connected to pc he is going off. Think is because battery is very low, led is blinking in red.
Then I hold vol down and connect usb cable, but how u can see on video phone weak up and go to booting.
I have hi suit last night as i mention fastboot works, but need to unlock phone. After that "your devices" screen came out and can't fastboot anymore
When i turning off phone with connected usb i can't turn phone off. After a second phone power on by his own.
If phone is disconnected longer than 5 min, then i push vol down and connect usb only red lightening shows up. I need to wait a while to phone start.

dragon218 said:
i hold power button, if phone isn't connected to pc he is going off. Think is because battery is very low, led is blinking in red.
Then I hold vol down and connect usb cable, but how u can see on video phone weak up and go to booting.
I have hi suit last night as i mention fastboot works, but need to unlock phone. After that "your devices" screen came out and can't fastboot anymore
When i turning off phone with connected usb i can't turn phone off. After a second phone power on by his own.
If phone is disconnected longer than 5 min, then i push vol down and connect usb only red lightening shows up. I need to wait a while to phone start.
Click to expand...
Click to collapse
OK. When phone is off, if you connect with PC, phone should be start, but this is only for charging. May be, you don't have charge, so phone is not going to fastboot mode with vol down?
Now just connect the phone with PC for full charge.
You don't have any recovery? Custom or stock?
It can be happen?
Sent from my NEM-L21 using Tapatalk

Anonda said:
OK. When phone is off, if you connect with PC, phone should be start, but this is only for charging. May be, you don't have charge, so phone is not going to fastboot mode with vol down?
Now just connect the phone with PC for full charge.
You don't have any recovery? Custom or stock?
It can be happen?
Sent from my NEM-L21 using Tapatalk
Click to expand...
Click to collapse
When i start charge phone blinking red in led, after while phone vibe 1 time and go to booting now, but led don't stop blinking. I will try to charge it, but because of working screen, phone heat a lot i don't wanna burn it.
Before i made rollback and something gone very bad, emui update after 100 % phone don't boot up. Without usb cable i wasn't able to go recovery or fastboot. So i think i don't have any recovery i made backup of files with twrp but now i can't flash it.

after night without power, phone drain all of battery. Now i understood better what is going on. when i plugged usb cable, phone don't start bye it own, only red lighting flash for second .
I disconnect cable and connect it with vol down button how all of here wrote. Phone immediately weak up an go to "your device has been..".
It's look like after i unlock phone (bootloader) somehow i was able to corrupt bootloader files or even delete it. Some one can confirm that it is possible to crash bootloader ?

dragon218 said:
after night without power, phone drain all of battery. Now i understood better what is going on. when i plugged usb cable, phone don't start bye it own, only red lighting flash for second .
I disconnect cable and connect it with vol down button how all of here wrote. Phone immediately weak up an go to "your device has been..".
It's look like after i unlock phone (bootloader) somehow i was able to corrupt bootloader files or even delete it. Some one can confirm that it is possible to crash bootloader ?
Click to expand...
Click to collapse
I have the same situation. I tried everything, Three button method, letting the battery run out completely, Vol+ and Power, Vol- and Power, connected to PC, not connected to PC. Every time I disconnect the charger, and reconnect it starts from 0. I read some other people here have the same problem. Send it to warranty and explain your rollback process unlocked the bootloader somehow (I mean the phone does do a lot of sh*ty sh*t, so this shouldn't seem very odd as well!!!) and hope that you get a repair/replacement and after that sell it on ebay hoping some stupid people like us in the first place will buy it and spend your money on a phone more reliable!

I managed to access the fastboot using the 3 button method in cold boot. Hold the Power key until the screen goes off and then release and hold down the Vol- key and immideately connect the usb cable to PC right before it vibrates or exactly when it vibrates (it's a matter of timing), and bingo you are in fastboot and you can flash system.img, recovery.img, cust.img, cache.img and boot.img from there, but this is not how I revived my phone. I used the 3 button method again when the phone was charged for like half an hour or so and the did the same cold boot trick and I could boot into the force upgrade environment (strangely this still didn't work whitout connecting the usb cable to PC), but it somehow didn't want to read the UPDATE.APP that I had in dload folder on my SD card and wanted to have it from my PC (I just felt it nad there was no indication of it ) so then I installed the DC Phoenix tool and payed 15 euros to be able to inject the complete UPDATE.APP to my bricked phone and the installation went well to 99% and failed, but I rebooted the phone and I could boot normally. Just to make sure I did a factory reset afterwards. Hope this helps.

bahador_b_92 said:
I managed to access the fastboot using the 3 button method in cold boot. Hold the Power key until the screen goes off and then release and hold down the Vol- key and immideately connect the usb cable to PC right before it vibrates or exactly when it vibrates (it's a matter of timing), and bingo you are in fastboot and you can flash system.img, recovery.img, cust.img, cache.img and boot.img from there, but this is not how I revived my phone. I used the 3 button method again when the phone was charged for like half an hour or so and the did the same cold boot trick and I could boot into the force upgrade environment (strangely this still didn't work whitout connecting the usb cable to PC), but it somehow didn't want to read the UPDATE.APP that I had in dload folder on my SD card and wanted to have it from my PC (I just felt it nad there was no indication of it ) so then I installed the DC Phoenix tool and payed 15 euros to be able to inject the complete UPDATE.APP to my bricked phone and the installation went well to 99% and failed, but I rebooted the phone and I could boot normally. Just to make sure I did a factory reset afterwards. Hope this helps.
Click to expand...
Click to collapse
Now your phone is OK?
Sent from my NEM-L21 using Tapatalk

Anonda said:
Now your phone is OK?
Sent from my NEM-L21 using Tapatalk
Click to expand...
Click to collapse
Yes. I am actually writing this from my Huawei P9 Lite now. This phone is really a nightmare for modifying and customization. I'm not sure if I'm going to resell it or just wait a reasonable amount of time until some reviews from the next update come out and see if I might wanna take the risk and update my phone again.

[Hard bricked] redmi 3sp hard bricked

I was using redmi 3sp and i flashed latest firmwere through twrp it succesfully flashed then i click on reboot to system and mobile screen directly goint to off. I try to on it but it cant boot. Also its not coming on fastboot and recovery mode(i tried many time to press volume up/down+ power button) i connect to into charger but nothing any happen..
After 2days i connect it into pc and nothing any happen then i open mi flash tool and click on refresh button(i tried pressing all three button) then i get like 'COM' name in mi flash tool(see in image) so i confused i disconnect the usb cable and again i connected but device is not showing there
what i do?
pleas help me guys

It's Deep sleep mod
SS Technical said:
I was using redmi 3sp and i flashed latest firmwere through twrp it succesfully flashed then i click on reboot to system and mobile screen directly goint to off. I try to on it but it cant boot. Also its not coming on fastboot and recovery mode(i tried many time to press volume up/down+ power button) i connect to into charger but nothing any happen..
After 2days i connect it into pc and nothing any happen then i open mi flash tool and click on refresh button(i tried pressing all three button) then i get like 'COM' name in mi flash tool(see in image) so i confused i disconnect the usb cable and again i connected but device is not showing there
what i do?
pleas help me guys
Click to expand...
Click to collapse
It happens many times with me it called deep sleep mod
*FIX*
Just hold power button for 2-4 minutes and then your phone will boot up
That's it and reply me
Don't worry it's not a hard brick
Because Redmi 3s is best

[email protected] said:
It happens many times with me it called deep sleep mod
*FIX*
Just hold power button for 2-4 minutes and then your phone will boot up
That's it and reply me
Don't worry it's not a hard brick
Because Redmi 3s is best
Click to expand...
Click to collapse
\
i tried bro but its not work any other solution?

SS Technical said:
\
i tried bro but its not work any other solution?
Click to expand...
Click to collapse
How long you hold power button?
Or remove and replug battery connection
---------- Post added at 10:42 AM ---------- Previous post was at 10:40 AM ----------
SS Technical said:
\
i tried bro but its not work any other solution?
Click to expand...
Click to collapse
Hold button for 6 minutes or above
And check if the power button is not dead

[email protected] said:
How long you hold power button?
Or remove and replug battery connection
---------- Post added at 10:42 AM ---------- Previous post was at 10:40 AM ----------
Hold button for 6 minutes or above
And check if the power button is not dead
Click to expand...
Click to collapse
bro now i am on pc i connected my phone into pc then then i press power button 1min then my phone led glow in blinking red light but i dont know what i exact do now?
sry my english is bad replay fast

SS Technical said:
bro now i am on pc i connected my phone into pc then then i press power button 1min then my phone led glow in blinking red light but i dont know what i exact do now?
sry my english is bad replay fast
Click to expand...
Click to collapse
Red led blinking
Oh lol your phone is not change just put your phone in charge for 20 minutes

I tried to charge night to morning contuniously but nothing any happen bro

SS Technical said:
I tried to charge night to morning contuniously but nothing any happen bro
Click to expand...
Click to collapse
I don't think your phone hard brick remove and replug battery

Is your problem fixed?
If not then message me I'll tell you what to do..

i removed battery connector and replug it then i try to reboot but only led red light blinking there

SS Technical said:
i removed battery connector and replug it then i try to reboot but only led red light blinking there
Click to expand...
Click to collapse
Is it still recognized in PC. Look at device manager. Under the PORT tree. Is it recognized something like Qualcomm 9008 or something?

SS Technical said:
i removed battery connector and replug it then i try to reboot but only led red light blinking there
Click to expand...
Click to collapse
Remove battery connector then reconnect battery don't do anything..
Just see this points in picture use any wire short it not solder just short it using wire or using screwdriver
Then insert your usb cable wait for some seconds you'll see your pc recognized your device port now remove your wire or screwdriver from pins then open mi flash tool flash your fastboot rom your phone will boot normally..

EDL mode pins

bro. pc detect my phone in pc name as COM when i select file and click on flash button after some second its give me hello packet error

Azzkaran said:
Remove battery connector then reconnect battery don't do anything..
Just see this points in picture use any wire short it not solder just short it using wire or using screwdriver
Then insert your usb cable wait for some seconds you'll see your pc recognized your device port now remove your wire or screwdriver from pins then open mi flash tool flash your fastboot rom your phone will boot normally..
Click to expand...
Click to collapse
bro i do this but its detect like qualcomm HS-USB diagnostics 900E (COM20)

pleas help me

SS Technical said:
pleas help me
Click to expand...
Click to collapse
Yes it's right now open mi flash tool select your rom then flash

Azzkaran said:
Yes it's right now open mi flash tool select your rom then flash
Click to expand...
Click to collapse
bro but when i opne mi flash tool and click on refresh button then its nothing detect(show) anything
also i tried reinstalled driver but flash tool nothing show anything
and device manager in port option its show HS-USB diagnostics 900E (COM20)

u can replay me here- [email protected]

bro i tried to change many port but its not detect in mi flash tool and its only show in port option qualcomm HS-USB diagnostics 900E (COM20) pleas help any another method to solve this issue