Database Users

Bricked Defy?

Hi my power button recently broke and i tried to flash twrp recovery to my working defy with wiui installed which allows to to wake the phone with the volume rocker, it has corrupted my recovery and my defy wont boot into android is my phone bricked as i cant think of anyway to recover it from this. Thanks

morgs640 said:
Hi my power button recently broke and i tried to flash twrp recovery to my working defy with wiui installed which allows to to wake the phone with the volume rocker, it has corrupted my recovery and my defy wont boot into android is my phone bricked as i cant think of anyway to recover it from this. Thanks
Click to expand...
Click to collapse
read this guide: http://forum.xda-developers.com/showthread.php?t=1216982
Boot into Bootloader mode (power-on while holding Vol-Down)
You may need to flash an SBF to get going again.

_ossie_ said:
read this guide: http://forum.xda-developers.com/showthread.php?t=1216982
Boot into Bootloader mode (power-on while holding Vol-Down)
You may need to flash an SBF to get going again.
Click to expand...
Click to collapse
Hi thanks for your reply i cant get into bootloader mode as my power button is broken?

morgs640 said:
Hi thanks for your reply i cant get into bootloader mode as my power button is broken?
Click to expand...
Click to collapse
Pull the battery and reinsert it while holding Vol-Down. This usually works as a power-up.
Do it while connected to a PC. The PC should sound the "device connected" sound.
If the white LED comes on, it usually means the phone is OFF and charging. No LED usually means it's ON and in BL mode (you should get the white text on black screen, but you won't if you have flashed a 'bad' SBF).
Try this a few times.
If nothing else is broken you should be able to get into BL mode and flash an SBF.
But your power button needs to be mechanically fixed at some stage, or your phone isn't going to be much use.

_ossie_ said:
Pull the battery and reinsert it while holding Vol-Down. This usually works as a power-up.
Do it while connected to a PC. The PC should sound the "device connected" sound.
If the white LED comes on, it usually means the phone is OFF and charging. No LED usually means it's ON and in BL mode (you should get the white text on black screen, but you won't if you have flashed a 'bad' SBF).
Try this a few times.
If nothing else is broken you should be able to get into BL mode and flash an SBF.
But your power button needs to be mechanically fixed at some stage, or your phone isn't going to be much use.
Click to expand...
Click to collapse
I have tried all of this already and unfortunately it doesnt get into bootloader mode it just comes up with the moto logo. The phone was working before i tried to update my cwm to twrp i didnt flash an sbf. The power button works fine it must be stuffed on the mainboard i took it apart and the button works fine, why do i need the power button for anyway?

morgs640 said:
I have tried all of this already and unfortunately it doesnt get into bootloader mode it just comes up with the moto logo. The phone was working before i tried to update my cwm to twrp i didnt flash an sbf. The power button works fine it must be stuffed on the mainboard i took it apart and the button works fine, why do i need the power button for anyway?
Click to expand...
Click to collapse
now can you turn on your phone? the power btn works?
try flashing official sbf , root and 2nd-init again.
p.s make sure you have above 20% batt or you gonna spend your time just like me plugging the defy mobo directly to 5 volts.

-Danik- said:
now can you turn on your phone? the power btn works?
try flashing official sbf , root and 2nd-init again.
p.s make sure you have above 20% batt or you gonna spend your time just like me plugging the defy mobo directly to 5 volts.
Click to expand...
Click to collapse
The power button doesnt work but it turns on when battery is inserted, i cant get the phone to pickup in rsd

morgs640 said:
The power button doesnt work but it turns on when battery is inserted, i cant get the phone to pickup in rsd
Click to expand...
Click to collapse
Hold the Volume Up key while inserting the battery.

_ossie_ said:
Hold the Volume Up key while inserting the battery.
Click to expand...
Click to collapse
just goes to moto logo, with usb cable it does the same after about a minute. i can get into the android bootmenu (where u can go into cwm overclock from etc) but recovery doesnt load comes up with missing file error due to me trying to flash twrp

morgs640 said:
just goes to moto logo, with usb cable it does the same after about a minute. i can get into the android bootmenu (where u can go into cwm overclock from etc) but recovery doesnt load comes up with missing file error due to me trying to flash twrp
Click to expand...
Click to collapse
Doesn't bootmenu (Recovery) give you option to reboot into Bootloader? If so, do this and flash an SBF.

_ossie_ said:
Doesn't bootmenu (Recovery) give you option to reboot into Bootloader? If so, do this and flash an SBF.
Click to expand...
Click to collapse
Even if it does, power button is malfunctioning, hence can't select it...
Sent from my MB525 using Tapatalk 2

dbarrera said:
Even if it does, power button is malfunctioning, hence can't select it...
Sent from my MB525 using Tapatalk 2
Click to expand...
Click to collapse
the menu button works to select items in cwm so no problem there, do u mean in bootloader?

_ossie_ said:
Doesn't bootmenu (Recovery) give you option to reboot into Bootloader? If so, do this and flash an SBF.
Click to expand...
Click to collapse
options are
- boot
-cpu
-recovery
-tools
-reboot

dbarrera said:
Even if it does, power button is malfunctioning, hence can't select it...
Click to expand...
Click to collapse
<<< head hits desk >>>
OK so if the phone will boot into recovery it SHOULD also boot into bootloader ?
Maybe I confused OP by saying hold "Vol Down" when I meant "Vol UP" ???
Anyway, OP will probably not get too far without a functional Power button.

_ossie_ said:
<<< head hits desk >>>
OK so if the phone will boot into recovery it SHOULD also boot into bootloader ?
Maybe I confused OP by saying hold "Vol Down" when I meant "Vol UP" ???
Anyway, OP will probably not get too far without a functional Power button.
Click to expand...
Click to collapse
Ok im with you now haha i thought you meant i needed the power button in cwm and i was thinking what for? but i cant get into bootloader anyway so doesnt really matter. I cant get into anything except cwm, holding up just brings up a black light up screen and phone wont recognize in rsd

morgs640 said:
... holding up just brings up a black light up screen and phone wont recognize in rsd
Click to expand...
Click to collapse
Are you SURE? I have had Bootloader work even though nothing shows on screen (when I flashed the wrong SBF). The screen was black but RSD could still "see" the device.
Defy has a locked bootloader (cannot be overwritten), so the fact that you can boot into recovery indicates the bootloader is still there and working. Maybe the problem is in your version of RSD Lite, or your version of drivers installed on the PC, or in your USB cable?
Try uninstalling the drivers from the PC, then rebooting, then attaching the phone and insert battery while holding Vol-Up. This SHOULD reinstall the BL drivers to the PC. Try another USB cable - I have had cables which work for charging but not for data transfer.

_ossie_ said:
Are you SURE? I have had Bootloader work even though nothing shows on screen (when I flashed the wrong SBF). The screen was black but RSD could still "see" the device.
Defy has a locked bootloader (cannot be overwritten), so the fact that you can boot into recovery indicates the bootloader is still there and working. Maybe the problem is in your version of RSD Lite, or your version of drivers installed on the PC, or in your USB cable?
Try uninstalling the drivers from the PC, then rebooting, then attaching the phone and insert battery while holding Vol-Up. This SHOULD reinstall the BL drivers to the PC. Try another USB cable - I have had cables which work for charging but not for data transfer.
Click to expand...
Click to collapse
Alright sound good thanks ill give it a go on my other pc using a different cable, thanks for your continued help with the problem

No go looks like the phone is cooked tried another defy and picks up straight away in rsd on boith pc's and mine doesnt work on either thanks for your help people.

ols help me....defy stuck at black screen...no bootloader
rsd lite recognises through factory cable but while flashing sbf it gives error sending ti rom packets and den it fails.....my stock rom was froyo india.....pls help.....
:crying:

Urgent Help - Defy bricked itself!! stuck on red M logo - going away in 6 hours!!!

So everything was running fine - i was on the last CM7 build ( maniacs final ) with a BL7 defy, left it on charge overnight and when i came ot it this morning its stuck on the red M logo and wont boot - and recovery has gone as well - no blue LED.
I can boot into the bootloader, but thats about it, the standard recovery menu wont appear either.
need help fast - please....

Ive just tried re-flashing the SBF files as per the instructions on rooting a bl7 defy, while it appeared to go OK, the phone is still stuck on the red motorola logo - no blue LED - please help....

Recovery mode doesnt work, after pulling the battery and re-starting i t whilst pressing power down, the only thing that happens is a red motorola logo, and there it stays.
please help...... ive got three hours to fix this.

2Pints said:
Recovery mode doesnt work, after pulling the battery and re-starting i t whilst pressing power down, the only thing that happens is a red motorola logo, and there it stays.
please help...... ive got three hours to fix this.
Click to expand...
Click to collapse
Power it off fully by taking out the battery and wait for a few minutes. Then press Vol- and then power button, till ! mark comes. Then press both Vol+ and vol-.

hotdog125 said:
Power it off fully by taking out the battery and wait for a few minutes. Then press Vol- and then power button, till ! mark comes. Then press both Vol+ and vol-.
Click to expand...
Click to collapse
thanks, left it for a good few minutes, all i get is a few minutes of black screen, followed by the red motorola logo, still nothing,
the weird thing is that it bricked itself after running fine for the last few weeks.

2Pints said:
thanks, left it for a good few minutes, all i get is a few minutes of black screen, followed by the red motorola logo, still nothing,
the weird thing is that it bricked itself after running fine for the last few weeks.
Click to expand...
Click to collapse
Hmmm, that worked for me. Took out the battery, left it for 2 minutes. I put back the battery, nothing happened. Then I realized that the phone had gone off so I did what I told you.

I can get to the bootloader with no problem, stock recovery on the other hand is completely absesnt

2Pints said:
I can get to the bootloader with no problem, stock recovery on the other hand is completely absesnt
Click to expand...
Click to collapse
You're not doing it correctly I suspect. However, flash an sbf and try.

By not doing it right, what do you mean?? this is what ive been doing take out battery - wait - replace battery and then hold power button down then hold the power button while keeping the volume down key pressed
RSD lite is showing the device as Omap3630 and imei as N/A

2Pints said:
By not doing it right, what do you mean?? this is what ive been doing take out battery - wait - replace battery and then hold power button down then hold the power button while keeping the volume down key pressed
RSD lite is showing the device as Omap3630 and imei as N/A
Click to expand...
Click to collapse
What I mean is that when you put the battery back, the phone should not switch on (the moto symbol should not come)
As long as it shows in RSDlite, its all good.

hotdog125 said:
What I mean is that when you put the battery back, the phone should not switch on (the moto symbol should not come)
As long as it shows in RSDlite, its all good.
Click to expand...
Click to collapse
again thanks for the help - still no luck. going to have to call it quits.
all i need now is a replacement phone - any sugestions, waterproof/resistant not too big?

2Pints said:
again thanks for the help - still no luck. going to have to call it quits.
all i need now is a replacement phone - any sugestions, waterproof/resistant not too big?
Click to expand...
Click to collapse
THE BLUE LED ONLY COMES WHEN CUSTOM RECOVERY IS INSTALLED.
SEE GOOGLE ON HOW TO ENTER STOCK RECOVERY. IF YOU MANAGED TO USE RSDLITE THEN I'M SURE YOU CAN GO TO STICK RECOVERY.
When you put back the battery, does the phone start? If it does then remove it and wait a little longer and try. It should work, it has worked for me. Plus If it shows in rsdlite you can try flashing to stock.

hotdog125 said:
THE BLUE LED ONLY COMES WHEN CUSTOM RECOVERY IS INSTALLED.
SEE GOOGLE ON HOW TO ENTER STOCK RECOVERY. IF YOU MANAGED TO USE RSDLITE THEN I'M SURE YOU CAN GO TO STICK RECOVERY.
When you put back the battery, does the phone start? If it does then remove it and wait a little longer and try. It should work, it has worked for me. Plus If it shows in rsdlite you can try flashing to stock.
Click to expand...
Click to collapse
Problem solved, Hardware problem, or to be more precise a build up of dust ( fine sand??) behind the volume rocker after a strip down nd clean it worked.
end result defy now running.

A1 Suddenly Dead

Hi
i bought before 2 weeks Xiaomi a1
it wored very good.
Today while I wanted to turn on the screen it did not respond.
The phone is not responding to any type of pressing.
I must say that the phone is new, did not get any kind of hit , and 5 min before this problem it used to work really good.
I think that the phone is in brick mode, and i can't enter to fastboot option because the phone is not responding....
Pls help my solve this problem.
Thanks

Try holding the pwoer button for more then 10 seconds, that should reset it... once you start it up aghain turn of ambient screen... Gave me troubles too... Hope that helps.

Has that still not been fixed with November update? I turned my ambient screen back on to see. So far, 2 days since update and no black screen after notification.

I'm guessing it's not dead. I have the same problem before as well. It was the buggy Ambient Display. Force restart your phone by pressing power button and holding it more than 10 second. First thing on boot up complete, go to Settings > Display and turn off Ambient Display.

micleftic said:
Try holding the pwoer button for more then 10 seconds, that should reset it... once you start it up aghain turn of ambient screen... Gave me troubles too... Hope that helps.
Click to expand...
Click to collapse
I cant even turn on the screen...
It's not showing any thing on the screen.
I tried to push the power but there is no respond

myself379 said:
I'm guessing it's not dead. I have the same problem before as well. It was the buggy Ambient Display. Force restart your phone by pressing power button and holding it more than 10 second. First thing on boot up complete, go to Settings > Display and turn off Ambient Display.
Click to expand...
Click to collapse
I tried forcing it. But it is still show black screen.
I think it is in brick mode

roy123456 said:
I tried forcing it. But it is still show black screen.
I think it is in brick mode
Click to expand...
Click to collapse
Just go in fastboot mode and reflash the firmware from MIUI.con

jack_21 said:
Just go in fastboot mode and reflash the firmware from MIUI.con
Click to expand...
Click to collapse
How can I enter the fastboot mode?
I cant even turn it on.
It is not respoding.
I tried to put it on this mode but the screen is still black.

roy123456 said:
How can I enter the fastboot mode?
I cant even turn it on.
It is not respoding.
I tried to put it on this mode but the screen is still black.
Click to expand...
Click to collapse
You must keep pressed vol down + power until the phone does show "FASTBOOT"

jack_21 said:
You must keep pressed vol down + power until the phone does show "FASTBOOT"
Click to expand...
Click to collapse
How long?
I tried it for 3 min ...
Is it enough?

roy123456 said:
How long?
I tried it for 3 min ...
Is it enough?
Click to expand...
Click to collapse
Well there is something strange.
Leave the phone discharge
Then let it charge
Then power on with vol down + power

Try these 2 things
1) charge your phone for 2-3 hours. if didnt switch on try this 2
2) Connect your data cable with pc. In mobile Press volume up + volume down and plug in the other end of usb cable to your mobile. you need to hold the keys. this will boot your phone into fastboot.
If boot steps didnt work then it might be a hardware problem or hard brick.

selvarajrajkanna said:
Try these 2 things
1) charge your phone for 2-3 hours. if didnt switch on try this 2
2) Connect your data cable with pc. In mobile Press volume up + volume down and plug in the other end of usb cable to your mobile. you need to hold the keys. this will boot your phone into fastboot.
If boot steps didnt work then it might be a hardware problem or hard brick.
Click to expand...
Click to collapse
What can I do if it is a hard brick?

roy123456 said:
What can I do if it is a hard brick?
Click to expand...
Click to collapse
Visit customer care(they will probably say motherboard problem as always) or try qfil method which is quite complex if this flashing things are new to you.

roy123456 said:
How long?
I tried it for 3 min ...
Is it enough?
Click to expand...
Click to collapse
you should press the power key while charging cable connected.If it doesn't work , unplug the charging usb and plug again reverse(type c's reversibility).If it can't, try with another AC source,another person,another location.
My A1 reborn by my gf's charging adaptor,hand and location.(she know nothing about android hard key combination)
Just thinking,don't know exactly.Sorry for my english.

My was hang.. so I restarted it.. but aftr tht.. phone is not turning on.. its just showing anroid one.. and nothhing else

ruhi maallivk said:
My was hang.. so I restarted it.. but aftr tht.. phone is not turning on.. its just showing anroid one.. and nothhing else
Click to expand...
Click to collapse
reflash phone with stock firmware in fastboot mode on MI FLASH TOOL

selvarajrajkanna said:
Try these 2 things
1) charge your phone for 2-3 hours. if didnt switch on try this 2
2) Connect your data cable with pc. In mobile Press volume up + volume down and plug in the other end of usb cable to your mobile. you need to hold the keys. this will boot your phone into fastboot.
If boot steps didnt work then it might be a hardware problem or hard brick.
Click to expand...
Click to collapse
I need help on urgent basis
I'm using Mi A1 rooted with custom kernel, My phone automatically received august update and it's installed automatically then i try to go in download mode to flash my phone with stock rom but i didn't press volume button properly and it's get restart and automatically start installing august update and i by mistake press power button and now my phone is not turning on even not responding
when i try to connect my phone with pc i can hear the connect sound but it's not going in fast boot

Shivam.S said:
I need help on urgent basis
I'm using Mi A1 rooted with custom kernel, My phone automatically received august update and it's installed automatically then i try to go in download mode to flash my phone with stock rom but i didn't press volume button properly and it's get restart and automatically start installing august update and i by mistake press power button and now my phone is not turning on even not responding
when i try to connect my phone with pc i can hear the connect sound but it's not going in fast boot
Click to expand...
Click to collapse
You switched off the phone in middle of installing ota, best bet is take it to the take it to the service center and tell them phone not switching back on after installing August ota update.
Or if not in warranty then try to install stock rom using qfil.

Unfortunately you have bricked your Mi A1
Shivam.S said:
I need help on urgent basis
I'm using Mi A1 rooted with custom kernel, My phone automatically received august update and it's installed automatically then i try to go in download mode to flash my phone with stock rom but i didn't press volume button properly and it's get restart and automatically start installing august update and i by mistake press power button and now my phone is not turning on even not responding
when i try to connect my phone with pc i can hear the connect sound but it's not going in fast boot
Click to expand...
Click to collapse
You have bricked your Mi A1, when you turned it off while installing/flashing the August update. Basically you should never turn a smartphone off, or disconnect the USB cable (if it is connected), while flashing its ROM.
There are various methods to unbrick it, I suggest you try this one since it's apparently not going into fast boot:
[Experimental]Recover Hard Bricked Xiaomi A1 Using SD Card

Huawei P9 Lite Bricked

Hello everyone. Huawei P9 Lite 2016. It doesn't go into Recovery, nor eRecovery and Fastboot also does not load, in general, not one combination of buttons does not work. I think the system is removed, what should I do? How do I achieve something myself?

Well, if your phone is unable to go into fastboot (hold volume- and plug it into a computer), I have some very bad news for you... What did you do??

marek26340 said:
Well, if your phone is unable to go into fastboot (hold volume- and plug it into a computer), I have some very bad news for you... What did you do??
Click to expand...
Click to collapse
Nothing at all.. It had very strong lags, I couldn't make anything, I restarted it delaying the power button for 10 seconds and so several times, and then made through the buttons hard reset, performed successfully, already turned on but still had so strong lags and now it isn't react at all, just a black screen and the red indicator is constantly on. I think that simply the system has been deleted and it is necessary to write down again, but how, the combination of buttons doesn't work at all

[email protected] said:
Hello everyone. Huawei P9 Lite 2016. It doesn't go into Recovery, nor eRecovery and Fastboot also does not load, in general, not one combination of buttons does not work. I think the system is removed, what should I do? How do I achieve something myself?
Click to expand...
Click to collapse
install Hisuite, then click on recover phone, it will aks you to connect with vol - and power button, you are now in rescue mode, you can flash recover via fastboot

sergio_f said:
install Hisuite, then click on recover phone, it will aks you to connect with vol - and power button, you are now in rescue mode, you can flash recover via fastboot
Click to expand...
Click to collapse
It can't see the phone and the combination of buttons doesn't work at all.

[email protected] said:
It can't see the phone and the combination of buttons doesn't work at all.
Click to expand...
Click to collapse
you dont need to see the phone, see attachments

[email protected] said:
It can't see the phone and the combination of buttons doesn't work at all.
Click to expand...
Click to collapse
im getting error on attachments, 2nd step is press Continue Button

sergio_f said:
im getting error on attachments, 2nd step is press Continue Button
Click to expand...
Click to collapse
Yes, but the sense of that? It's necessary to work with buttons and not one combination of buttons doesn't work. Hisuite asks me to click on the power button and on the volume down button but nothing happens it doesn't go in Fastboot mode or in Recovery nor in eRecovery.

[email protected] said:
Yes, but the sense of that? It's necessary to work with buttons and not one combination of buttons doesn't work. Hisuite asks me to click on the power button and on the volume down button but nothing happens it doesn't go in Fastboot mode or in Recovery nor in eRecovery.
Click to expand...
Click to collapse
press and hold power and vol - , and connect to computer? have you done that?

sergio_f said:
press and hold power and vol - , and connect to computer? have you done that?
Click to expand...
Click to collapse
Yes. It makes nothing. Black screen and red indicator always.

Do you still have warranty on it? If you did not even unlock bootloader, then try to send it in for a warranty repair. Something on the motherboard must have gone bad..

[Hard bricked] redmi 3sp hard bricked

I was using redmi 3sp and i flashed latest firmwere through twrp it succesfully flashed then i click on reboot to system and mobile screen directly goint to off. I try to on it but it cant boot. Also its not coming on fastboot and recovery mode(i tried many time to press volume up/down+ power button) i connect to into charger but nothing any happen..
After 2days i connect it into pc and nothing any happen then i open mi flash tool and click on refresh button(i tried pressing all three button) then i get like 'COM' name in mi flash tool(see in image) so i confused i disconnect the usb cable and again i connected but device is not showing there
what i do?
pleas help me guys

It's Deep sleep mod
SS Technical said:
I was using redmi 3sp and i flashed latest firmwere through twrp it succesfully flashed then i click on reboot to system and mobile screen directly goint to off. I try to on it but it cant boot. Also its not coming on fastboot and recovery mode(i tried many time to press volume up/down+ power button) i connect to into charger but nothing any happen..
After 2days i connect it into pc and nothing any happen then i open mi flash tool and click on refresh button(i tried pressing all three button) then i get like 'COM' name in mi flash tool(see in image) so i confused i disconnect the usb cable and again i connected but device is not showing there
what i do?
pleas help me guys
Click to expand...
Click to collapse
It happens many times with me it called deep sleep mod
*FIX*
Just hold power button for 2-4 minutes and then your phone will boot up
That's it and reply me
Don't worry it's not a hard brick
Because Redmi 3s is best

[email protected] said:
It happens many times with me it called deep sleep mod
*FIX*
Just hold power button for 2-4 minutes and then your phone will boot up
That's it and reply me
Don't worry it's not a hard brick
Because Redmi 3s is best
Click to expand...
Click to collapse
\
i tried bro but its not work any other solution?

SS Technical said:
\
i tried bro but its not work any other solution?
Click to expand...
Click to collapse
How long you hold power button?
Or remove and replug battery connection
---------- Post added at 10:42 AM ---------- Previous post was at 10:40 AM ----------
SS Technical said:
\
i tried bro but its not work any other solution?
Click to expand...
Click to collapse
Hold button for 6 minutes or above
And check if the power button is not dead

[email protected] said:
How long you hold power button?
Or remove and replug battery connection
---------- Post added at 10:42 AM ---------- Previous post was at 10:40 AM ----------
Hold button for 6 minutes or above
And check if the power button is not dead
Click to expand...
Click to collapse
bro now i am on pc i connected my phone into pc then then i press power button 1min then my phone led glow in blinking red light but i dont know what i exact do now?
sry my english is bad replay fast

SS Technical said:
bro now i am on pc i connected my phone into pc then then i press power button 1min then my phone led glow in blinking red light but i dont know what i exact do now?
sry my english is bad replay fast
Click to expand...
Click to collapse
Red led blinking
Oh lol your phone is not change just put your phone in charge for 20 minutes

I tried to charge night to morning contuniously but nothing any happen bro

SS Technical said:
I tried to charge night to morning contuniously but nothing any happen bro
Click to expand...
Click to collapse
I don't think your phone hard brick remove and replug battery

Is your problem fixed?
If not then message me I'll tell you what to do..

i removed battery connector and replug it then i try to reboot but only led red light blinking there

SS Technical said:
i removed battery connector and replug it then i try to reboot but only led red light blinking there
Click to expand...
Click to collapse
Is it still recognized in PC. Look at device manager. Under the PORT tree. Is it recognized something like Qualcomm 9008 or something?

SS Technical said:
i removed battery connector and replug it then i try to reboot but only led red light blinking there
Click to expand...
Click to collapse
Remove battery connector then reconnect battery don't do anything..
Just see this points in picture use any wire short it not solder just short it using wire or using screwdriver
Then insert your usb cable wait for some seconds you'll see your pc recognized your device port now remove your wire or screwdriver from pins then open mi flash tool flash your fastboot rom your phone will boot normally..

EDL mode pins

bro. pc detect my phone in pc name as COM when i select file and click on flash button after some second its give me hello packet error

Azzkaran said:
Remove battery connector then reconnect battery don't do anything..
Just see this points in picture use any wire short it not solder just short it using wire or using screwdriver
Then insert your usb cable wait for some seconds you'll see your pc recognized your device port now remove your wire or screwdriver from pins then open mi flash tool flash your fastboot rom your phone will boot normally..
Click to expand...
Click to collapse
bro i do this but its detect like qualcomm HS-USB diagnostics 900E (COM20)

pleas help me

SS Technical said:
pleas help me
Click to expand...
Click to collapse
Yes it's right now open mi flash tool select your rom then flash

Azzkaran said:
Yes it's right now open mi flash tool select your rom then flash
Click to expand...
Click to collapse
bro but when i opne mi flash tool and click on refresh button then its nothing detect(show) anything
also i tried reinstalled driver but flash tool nothing show anything
and device manager in port option its show HS-USB diagnostics 900E (COM20)

u can replay me here- [email protected]

bro i tried to change many port but its not detect in mi flash tool and its only show in port option qualcomm HS-USB diagnostics 900E (COM20) pleas help any another method to solve this issue