Related
Hey guys, need some help. I've searched around and tried to do different things but I'm afraid that I might be stuck (due to my limited knowledge of working with androids).
So I rooted my Fascinate and installed ROM manager and clockwork recovery onto it. Well, after fiddling around with it for a few weeks, I feel like I’ve gotten my self into a position where I’ve lost the way back. So now, I’ve tried unrooting using a couple of methods (update.zip and one click unroot) but it fails every time. This led me to believe that root/super user was not gone from my system (Super User icon/app is still there). This morning, I installed Titanium Back up and it said it couldn’t start because my phone is not rooted. I go into the Super User app and no app has requested it. I’m just kinda lost at this point and want my phone back to the state when I had first purchased it.
Now I know there is the Odin way, however, his post says that his files include superuser and busybox already installed – this I don’t want. I want the unrooted factory Samsung Fascinate state back. I was thinking about using the “factory reset” option in the settings but wanted to get your opinion on this before proceeding (since several posts said to do it where as others said don’t do this way).
Can someone help this clueless android n00b? Please?
If you do a factory reset superuser will still be installed.
When I did Oden restore i think I had to re-root my phone.
You could also root your pone again, then un-root to remove superuser.
Why do you care? My wife and I both have gotten replacements because of hardware defects. Both phones were rooted and they never questioned it either time.
This thread contains ODIN files for a completely stock device:
http://forum.xda-developers.com/showthread.php?t=782204
No root/bb/su.
NKT said:
This thread contains ODIN files for a completely stock device:
No root/bb/su.
Click to expand...
Click to collapse
Actually, the system file in that thread does have SU/Superuser.apk/Busybox, but otherwise it's stock.
atrich0608 said:
You could also root your pone again, then un-root to remove superuser.
Click to expand...
Click to collapse
This did the trick!!
I used the the z4root app from appbrain, rooted and unrooted. SU = Gone!! Amazing!
Thank you!!
Just got a system update notification... taking forever to install... anyone know what it entails?
Edit: SO I see that Sprint ID / EW!!!) was installed, and my Firmware is 2.2.1, and baseband is S: P100.08 S: EB28, and Build is SPH-P100.EB28...
Problem is, I can't remember if that's new or not...lol. Damn me for not paying attention, and DAMN ME for thinking that the possibility of a HC release was possible... stupid hopes and dreams....
Edit II: Just found this report... compared to the rest of the updates, the SGT got the short end of the stick YET AGAIN!!!
http://www.wirelessandmobilenews.co...epic-4g-tab-transform-updates-coming-321.html
"The Samsung Galaxy Tab update adds Sprint ID features."
I updated also and 2.2.1 is new, also ot updated the modem as seen by hitting the soft menu key during the update and looking under about phone, baseband. I would like to see if the update package had a whole modem.bin in ot but i installed the update before I got the temp file. The last update only had a modem file of a few kbytes so it just patched the modem. It would be great to get hold of a whole modem.bin as there are none for the sprint tab currently.
Sent from my SPH-P100 using XDA App
I was just going to as if anyone was able to grab the modem.bin. Hopefully we get luck and someone is able to do so.
What about root status? I'm hesitant to update if it breaks root because of the issues I've had with the stock gallery app (removed it via a root file explorer).
I updated my rooted Gtab and the root seems unaffected. I use mine without a data pack - wifi only. I used the root to get rid of the activation nagger in the notification bar - and it's still gone and SuperUser is still operating.
However: Sprint ID only works through a Sprint Subscriber Data Pack - not over WiFi, unless you have a company "Keyword". Alas - I don't like Sprint ID anyway.
sprint tv
i installed the "sprint" id, and it says in the description about sprint tv. i had this on the evo, but i feel like i'd make better use of it on a 7 inch screen. any ideas how to get it on the tab? i searched the market under the sprint tab and had no luck finding it.. any suggestion would be great
I got the OTA shortly after trying to install clockwork and patching an overclocked kernel. I wasn't expecting the OTA until Monday, but I went ahead and try to install it (it failed, of course).
I managed to pull the downloaded zip file out of my cache and check if there was a modem.bin. Unfortunately, once again, there's only a modem_delta.bin, so no luck there.
I tried running the update again manually after rolling back my kernel, and apparently I still had a modified boot.img, so after doing a full wipe, rolling back to DJ30, and then manually updating to EA24, I was able to get the EB28 update installed, with all of its Sprint ID goodness. It's very late now so I don't have time to actually play with it much, but I'm actually happy to be back to an official build. I'm hoping they fixed a few of the bigger issues I had with EA24, but I somehow doubt it.
Previously I was rooted and had the Bauxite kernel. I flashed the original kernel back and then installed the EB28 update. I lost root, so I tried superoneclick again. It said it rooted but superoneclick locked up while "Remounting system with read-only access..." My tab is unresponsive but the buttons are still lit up.
Update: I finally got it to reboot and I am rooted again.
matt6x7 said:
Previously I was rooted and had the Bauxite kernel. I flashed the original kernel back and then installed the EB28 update. I lost root, so I tried superoneclick again. It said it rooted but superoneclick locked up while "Remounting system with read-only access..." My tab is unresponsive but the buttons are still lit up.
Update: I finally got it to reboot and I am rooted again.
Click to expand...
Click to collapse
Would you mind attaching your file for the original kernel? I forgot to make a backup when flashing Bauxite.
powermatt said:
What about root status? I'm hesitant to update if it breaks root because of the issues I've had with the stock gallery app (removed it via a root file explorer).
Click to expand...
Click to collapse
I applied the update last night and can confirm that root is still intact, so the super one click method should still work if you haven't rooted your tab prior to this update.
Unfortunately, what is also intact is my long standing issue with the stock Gallery app (rogue sensor usage causing massive battery drain). Ah well, removed with Titanium backup, replaced with Just Pictures, problem fixed. Again.
Other than the addition of Sprint ID, this seems to be a pretty minor update. Could be my imagination, but it seems a tad snappier than the EA24 update. Could be the incremental increase to Android 2.2.1. But other than Sprint ID, there are no major new features.
powermatt said:
I applied the update last night and can confirm that root is still intact, so the super one click method should still work if you haven't rooted your tab prior to this update.
Click to expand...
Click to collapse
Thanks for the useful info. I was hesitant to run the update after the previous hassles. I've just updated mine without any noticeable detrimental effect.
regards,
Tony C.
Root was not intact for me after upgrade. I tested with root explorer, and font changer. Both failed after trying to get root permission. I just used SOC after upgrade. All was good...
@lloydcabraham
Here is my backup kernel prior to the new EB28 update. Sorry for the delay, I've been engrossed in basketball.
matt6x7 said:
@lloydcabraham
Here is my backup kernel prior to the new EB28 update. Sorry for the delay, I've been engrossed in basketball.
Click to expand...
Click to collapse
Thanks I really appreciate it!
I was previously rooted with SuperOneCLick (rageagainstthecage method). I did not unroot prior to the upgrade. The upgade said it failed but a look at About Phone proved otherwise. I would suggest that people unroot before the upgrade but it did not matter for me.
After the update I no longer had root access. But I was able to root with SuperOneClick again. I have had no problems since the upgrade/reroot. There are no interface differences that I have spotted so far.
Can someone please post the application name for the Sprint ID so I can remove it. I had gotten rid of all the Bloatware and now after this update I get this which I will not use.
By the way I was rooted with Super One Click and using the Once Click lag Fix and after update I did lose Root. Just re-rooted and am fine now. Got scared because the orientation was not working and I thought it broke it. Sohow the update set the orientation lock.
Also I deleted a couple files hoping these were the new Sprint ID update.
Does anyone know what they are and if I need them can somone please post them? I will take the best guess of what I remember them being called.
Perhaps someone can post there Sprint file names.
SprintAndroid
SprintUpdate
Thanks,
Mark
Can someone post the update.zip for the update? I got the OTA notification but when it attempted to install (using Stock recovery), it failed, somehow.
Thanks in advance.
I need the update.zip as well.
Hell, mine still tries to update my tab to EA24 which always failed. Can't even get the notification for 28. Time to go to Sprint and raise some hell....
Sent from my SPH-P100 using XDA Premium App
My sprint galaxy tab was updated the EB28 the day I got it (two days ago), today I was trying to get CWM on the tab, got stuck at Samsung screen, so I used odin and flashed back to DJ30 (without baseband, which is already at EB28) and have been trying to get back to EB28 since.
Can any of you kind gentlemen who updated to EB28 do a roto backup and upload the file? I think this is the only way I can get back into EB28 at the moment.
Many thanks!
I know outside of Att note 3 it hasn't been confirmed to work but wondering if anyone tried it on other note devices? Thanks.
Sent from my iPhone using Tapatalk
Used it installed safestrap and when it reboots get the unlock symbol on the boot screen
Sent from my SM-N900V using XDA Premium 4 mobile app
Works fine on my device. For the unlock symbol, download latest SU and updated binaries. That will go away.
Sent from my SM-N900V using Tapatalk
Definitely works for getting root. Rooted, installed SuperSU, Xposed, SafeStrap all successfully. Now struggling to get a rom to work (tried Eclipse & Hyperdrive). Both say they install successfully via SafeStrap and then hangs on boot up. I've seen one other post on the Eclipse thread for the same problem, so it might be something to keep an eye on.
i can verify that this method works. i just installed superuser and it works flawlessly. the only thing is make sure to download the superuser app from here so you have the updated binaries: http://download.chainfire.eu/447/SuperSU/UPDATE-SuperSU-v1.99r4.zip
re
i have root access verified w/root checker
downloaded v1.99r4.zip and installed it
when i open it it asks for me to update binary and it fails installation
any ideas or workarounds??
lazygregg said:
i have root access verified w/root checker
downloaded v1.99r4.zip and installed it
when i open it it asks for me to update binary and it fails installation
any ideas or workarounds??
Click to expand...
Click to collapse
Rerun towelroot
re
drewcam888 said:
Rerun towelroot
Click to expand...
Click to collapse
i've done that multiple times...
reran towelroot, it reboots phone..open supersu the version that i downloaded earlier from the website and try to download supersu binary and it fails
lazygregg said:
i've done that multiple times...
reran towelroot, it reboots phone..open supersu the version that i downloaded earlier from the website and try to download supersu binary and it fails
Click to expand...
Click to collapse
I seem to be in the same boat as well. Things I have tried and it still does not work:
Installed Play Store Edition
Installed 1.99r4
Installed 1.99r5
All of them are saying I need to update binaries. While I am technically rooted and can grant permissions to apps, I need to get into SuperSU so I can modify some settings.
There are several others have issues on Reddit as well, so its not a couple of people.
exaltedgod said:
I seem to be in the same boat as well. Things I have tried and it still does not work:
Installed Play Store Edition
Installed 1.99r4
Installed 1.99r5
All of them are saying I need to update binaries. While I am technically rooted and can grant permissions to apps, I need to get into SuperSU so I can modify some settings.
There are several others have issues on Reddit as well, so its not a couple of people.
Click to expand...
Click to collapse
Try this. Install safestrap 3.7x. Open it, give su permission, install recovery, hit the home button. Open supersu, update binary thru cwm/twrp. Don't click to reboot phone into recovery from supersu. Hold down home and bring safestrap back up. Reboot to recovery from there and it should update the binary. Hope this helps.
Sent from my SM-N900V using XDA Premium HD app
Dc4479 said:
Try this. Install safestrap 3.7x. Open it, give su permission, install recovery, hit the home button. Open supersu, update binary thru cwm/twrp. Don't click to reboot phone into recovery from supersu. Hold down home and bring safestrap back up. Reboot to recovery from there and it should update the binary. Hope this helps.
Click to expand...
Click to collapse
This is being very peculiar. After I installed Safe Strap, SuperSU went fine, able to get in and do what I needed to get done. I reboot into recovery. Made a backup, and rebooted system. Went right to SuperSU again. And the same issue occurs, constantly asking for updated binaries. I am trying everyone once more to make it all work. If not, then I will just stick with what I have and hopefully it doesn't cause any other issues.
Thank you for the help thus far. :good:
exaltedgod said:
This is being very peculiar. After I installed Safe Strap, SuperSU went fine, able to get in and do what I needed to get done. I reboot into recovery. Made a backup, and rebooted system. Went right to SuperSU again. And the same issue occurs, constantly asking for updated binaries. I am trying everyone once more to make it all work. If not, then I will just stick with what I have and hopefully it doesn't cause any other issues.
Thank you for the help thus far. :good:
Click to expand...
Click to collapse
Yeah I just did all this last night...I installed SafeStrap and installed Recovery, then went into SuperSU and clicked Normal when asking for updating Binaries and it hasnt asked again thankfully. All of this of course was after installing BusyBox from the Play Store.
Note though: Safestrap isnt working for flashing roms just yet, just like someone else said here, and someone else said this in the Jasmine Rom forum. I just tried it myself and everything looks fine when installing, but then when you boot up, screen goes black and unresponsive after the SS splash screen on a reboot. Hopefully we have an update to SS soon. Fair warning - make sure you create a backup of your System/Data, etc in SS before messing around...it makes it so much easier to restore in case something screws up.
pmt223 said:
Yeah I just did all this last night...I installed SafeStrap and installed Recovery, then went into SuperSU and clicked Normal when asking for updating Binaries and it hasnt asked again thankfully. All of this of course was after installing BusyBox from the Play Store.
Note though: Safestrap isnt working for flashing roms just yet, just like someone else said here, and someone else said this in the Jasmine Rom forum. I just tried it myself and everything looks fine when installing, but then when you boot up, screen goes black and unresponsive after the SS splash screen on a reboot. Hopefully we have an update to SS soon. Fair warning - make sure you create a backup of your System/Data, etc in SS before messing around...it makes it so much easier to restore in case something screws up.
Click to expand...
Click to collapse
So, can someone enlighten me on what this "root" does? I've been running SafeStrap 3.72 with HyperROM 8 and just yesterday, successfully installed Towelroot on my Verizon Note 3. I downloaded the new SU to my SDcard before running Towelroot and was able to run it immediately after root and all looks good. But... what did I actually gain? Can I now install Cyanogen or others? I am a bit fuzzy on the difference, if any, on a rooted phone vs. an unlocked bootloader. Those of us on the Verizon retail Note 3 still don't have unlocked bootloaders do we? I miss the ease of playing with my old S3! LOL. Thanks!
emtownsend said:
So, can someone enlighten me on what this "root" does? I've been running SafeStrap 3.72 with HyperROM 8 and just yesterday, successfully installed Towelroot on my Verizon Note 3. I downloaded the new SU to my SDcard before running Towelroot and was able to run it immediately after root and all looks good. But... what did I actually gain? Can I now install Cyanogen or others? I am a bit fuzzy on the difference, if any, on a rooted phone vs. an unlocked bootloader. Those of us on the Verizon retail Note 3 still don't have unlocked bootloaders do we? I miss the ease of playing with my old S3! LOL. Thanks!
Click to expand...
Click to collapse
No, you dont gain an unlocked bootlader. At this point, only the Almighty will make that happen lol. For us with Verizon Notes (and some others), this helps the folks who either a) dont want to use Kingo or the other web methods, and b) folks who were on stock 4.4.2 NC4, like from an OTA (like me). This now gave me root, where when the OTA came out people were fearing there would never be a root for it (thanks to everyone else who put monies towards a bounty). Many people as well as myself cannot use SafeStrap successfully to fully flash a rom yet (you'll see this remarked in a lot of places), so Im sure there is an update forthcoming. In the meantime, I can use TB and freeze/uninstall a lot of the bloatware crap, and use Xposed for whatever else, which is fine by me. But no, we are still a no-go on full rooting and unlocked bootladers like on some other phones, which means no CyanogenMod, etc.
pmt223 said:
No, you dont gain an unlocked bootlader. At this point, only the Almighty will make that happen lol. For us with Verizon Notes (and some others), this helps the folks who either a) dont want to use Kingo or the other web methods, and b) folks who were on stock 4.4.2 NC4, like from an OTA (like me). This now gave me root, where when the OTA came out people were fearing there would never be a root for it (thanks to everyone else who put monies towards a bounty). Many people as well as myself cannot use SafeStrap successfully to fully flash a rom yet (you'll see this remarked in a lot of places), so Im sure there is an update forthcoming. In the meantime, I can use TB and freeze/uninstall a lot of the bloatware crap, and use Xposed for whatever else, which is fine by me. But no, we are still a no-go on full rooting and unlocked bootladers like on some other phones, which means no CyanogenMod, etc.
Click to expand...
Click to collapse
Ah. Got it. Thanks!
* I successfully used SafeStrap to install HyperROM 8 on slot 1 only, so I had to lose my stock ROM, but I'm OK with that.
cnotes2019 said:
I know outside of Att note 3 it hasn't been confirmed to work but wondering if anyone tried it on other note devices? Thanks.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
i rooted today with towelroot. i have a verizon note 3 on 4.4.2
First off, I have little knowledge about rooting, custom recoveries.. etc. I'm a noob.
My problem is that I do have my Samsung Galaxy E5 (S978L) rooted with King Root (verified with root checker).
But I am trying to get rid of King Root and replace it with SuperSU. I have the SuperSU-Me app installed, but it
doesn't get past "Processing, please wait...". The regular SuperSU app gives me an error when I try to install it,
and it says "The SU binary needs to be updated. Continue?" I have to select normal? Since my device is not listed
under TWRP's install menu... and the normal install fails leading me to "Installation failed! please reboot and try again"
which obviously doesn't work for me. I think I read something about unlocking bootloaders, but I am not sure where
to go from that, since samsung is harder to do that with? Correct me if I'm wrong. Also I don't think it helps that this E5
is the straight talk tracfone model.
Bottom line is I am trying to replace King Root with SuperSU, and install TWRP onto my POS phone. Any help is appreciated. Once again, I have no clue about anything really. Trying to learn this stuff
Try this SuperSu Me version, it worked like charm for me,
https://userscloud.com/krqm5cr96eby.
Google Drive link: https://drive.google.com/file/d/0B-dC_jprJYfYRTVnd0R2b2dRRzQ/view?usp=drivesdk
Hit Thanks if it's helpful!! ?
Sent from my SM-E700H using Tapatalk
I started a thread about thishere.
Has some useful info for you. Supersume got rid of king root for me, version 6.7 did it I'll try to upload it later. Also as far as a custom recovery, we are still working on making a permissive kernel which I feel like I am getting closer, but not having a computer to test with if I brick I'm out the game for a little bit lol. Also in my thread at my latest post I explained how to find the proper partitions to dump with dd in terminal emulator, to make a proper nandroid. Many useful articles on this site. Good luck. Maybe you should merge this with the other thread I linked and started for our sneaky straight talk phones. Also, once we get the permissive kernel, we can get the custom recovery going probably, bootloader needs to be unlocked too. Anyways ya, be easy.
Just a little update: I finally have SuperSU installed. For some reason, supersu me wasn't working with my king root, however once I uninstalled it, and installed KINGOroot supersu me worked...
Maybe I can now assist in your process since I have a powerful computer and a decent paying job. But my days are pretty busy. But shortly I'll be trying to make a nandroid backup after doing some reading. Have to learn some of this stuff. But my next couple days are packed. Anyways thanks for pointing me in the right direction
firmware galaxy e5 s978L!!!
the cure
need
-Odin
-drivers samsung
and download this firmware :
firmware.gem-flash.com/index.php?a=browse&b=category&id=8395
Andough said:
First off, I have little knowledge about rooting, custom recoveries.. etc. I'm a noob.
My problem is that I do have my Samsung Galaxy E5 (S978L) rooted with King Root (verified with root checker).
But I am trying to get rid of King Root and replace it with SuperSU. I have the SuperSU-Me app installed, but it
doesn't get past "Processing, please wait...". The regular SuperSU app gives me an error when I try to install it,
and it says "The SU binary needs to be updated. Continue?" I have to select normal? Since my device is not listed
under TWRP's install menu... and the normal install fails leading me to "Installation failed! please reboot and try again"
which obviously doesn't work for me. I think I read something about unlocking bootloaders, but I am not sure where
to go from that, since samsung is harder to do that with? Correct me if I'm wrong. Also I don't think it helps that this E5
is the straight talk tracfone model.
Bottom line is I am trying to replace King Root with SuperSU, and install TWRP onto my POS phone. Any help is appreciated. Once again, I have no clue about anything really. Trying to learn this stuff
Click to expand...
Click to collapse
I've managed to install TWRP - ver twrp-3.1.1-0-gracelte.img.tar (for N7) via Odin. Straightforward. Could access recovery, but need now to work out how to deal with encryption in order to make backup. Any help would be appreciated.
We're on our way!
Great job keep us posted
zamzenos said:
I've managed to install TWRP - ver twrp-3.1.1-0-gracelte.img.tar (for N7) via Odin. Straightforward. Could access recovery, but need now to work out how to deal with encryption in order to make backup. Any help would be appreciated.
We're on our way!
Click to expand...
Click to collapse
I think you would need a boot.img that disables it. Or you can disable encryption manually and erase all data to keep it disabled.
zamzenos said:
I've managed to install TWRP - ver twrp-3.1.1-0-gracelte.img.tar (for N7) via Odin. Straightforward. Could access recovery, but need now to work out how to deal with encryption in order to make backup. Any help would be appreciated.
We're on our way!
Click to expand...
Click to collapse
@jcadduono can help you to have a perfect job about TWRP ...
Ask him on irc ...
Backup failed because /data cannot be mounted, which suggests a mismatch twixt TWRP and device. Decided to push on and try to root. This failed, so that stock firmware had to be installed. I've hacked a number of phones and tabs here, so I was itching to see what could be done with existing N7 mods. Now I know.
It looks as though we need recovery etc specific to FE. Not sure we will have the numbers for it, though. If anyone has any ideas...
zamzenos said:
I've managed to install TWRP - ver twrp-3.1.1-0-gracelte.img.tar (for N7) via Odin. Straightforward. Could access recovery, but need now to work out how to deal with encryption in order to make backup. Any help would be appreciated.
We're on our way!
Click to expand...
Click to collapse
Your a brave man for trying this and the first to do so on here so thank you!.
As for the encryption on all the last few sammy devices ive had/have including the original Note 7 once you flash twrp you have to format data in twrp (not wipe mind you...format) to remove encryption.
We also had to then flash a zip to deal with dm verity but now SU does that anyway and also keeps the device decrypted when you reboot.
Id hazard a guess and say if you formatted and flashed SU this might actually work.
Now that we know flashing twrp (which was my main worry) and then odin stock without any issues this just got alot less risky.
sent from my Note FE, S8 plus, S7 edge or S6
Well I'm traveling now and will give this a go when I return home. Question: does DM Verity and Magic's or SU root require a a Note FR boot image to work or can they simply patch the boot image?
force70 said:
Your a brave man for trying this and the first to do so on here so thank you!.
As for the encryption on all the last few sammy devices ive had/have including the original Note 7 once you flash twrp you have to format data in twrp (not wipe mind you...format) to remove encryption.
We also had to then flash a zip to deal with dm verity but now SU does that anyway and also keeps the device decrypted when you reboot.
Id hazard a guess and say if you formatted and flashed SU this might actually work.
Now that we know flashing twrp (which was my main worry) and then odin stock without any issues this just got alot less risky.
sent from my Note FE, S8 plus, S7 edge or S6
Click to expand...
Click to collapse
Ah, I followed directions I found on the N7 forum, from which I assumed that SU would do the encryption. This is the first time I have come up against this barrier. I was resigned to possibly not having root, but from what you say I now think we might well manage it.
I've had a number of narrow shaves with various devices, so I felt that I could find my way out of any difficulty I encountered hacking the FE (maybe just fool's luck) . While cortez.i will try it at some stage, I am tempted to dive back in and see what happens.
Incidentally, sammobile didn't have the K variant firmware (may have now). I found it through google on a vietnamese site.
Just found this comprehensive guide to removing dm-verity:
http://www.theandroidsoul.com/disable-dm-verity-forced-encryption-galaxy-note-7/
Posting this separately.
FE WILL ROOT!
Factory reset is automatic (with less KT bloat, for some reason).
Titanuim can uninstall apps. But Adaway cannot copy edited hosts file. Sdfix cannot release the card: says there are no groups in WRITE_EXTERNAL_STORAGE. Keep getting a security warning with each reboot from security log agent, but no action on reboot. Hopefully, all this can be sorted.
Finally, TWRP backup successful. Assume for now that it would restore, if needed.
zamzenos said:
Posting this separately.
FE WILL ROOT!
Factory reset is automatic (with less KT bloat, for some reason).
Titanuim can uninstall apps. But Adaway cannot copy edited hosts file. Sdfix cannot release the card: says there are no groups in WRITE_EXTERNAL_STORAGE. Keep getting a security warning with each reboot from security log agent, but no action on reboot. Hopefully, all this can be sorted.
Finally, TWRP backup successful. Assume for now that it would restore, if needed.
Click to expand...
Click to collapse
You are THE MAN !!!!
WOOOOOOOOOO
wolfgart said:
You are THE MAN !!!!
WOOOOOOOOOO
Click to expand...
Click to collapse
I second that!
You shoukd be able to freeze security log agent with TIBU or package disabler pro to get rid of that message
force70 said:
I second that!
You shoukd be able to freeze security log agent with TIBU or package disabler pro to get rid of that message
Click to expand...
Click to collapse
I uninstalled the log agent with Titanium, ripped out all the Knox, still getting that message. I think I'll backup progress so far and restart FE from within the warning message and see what happens...**
Thank you both for the kudos. But some work still to be done. I'm finding some apps won't start - unfortunately some of them important. It's OK for now - I'm not using the FE yet - but need to get some real benefits from root, otherwise it's back to stock with Adhell (tho' I'd say sammy will spike that soon). Maybe folk with more tech xp than I have can work out what's wrong here.
**Restart from within Security boots into Recovery - in this case TWRP. Looks like a response to the decrypted state, and is set off by any root level action. Can we get rid of this?
zamzenos said:
Posting this separately.
FE WILL ROOT!
Factory reset is automatic (with less KT bloat, for some reason).
Titanuim can uninstall apps. But Adaway cannot copy edited hosts file. Sdfix cannot release the card: says there are no groups in WRITE_EXTERNAL_STORAGE. Keep getting a security warning with each reboot from security log agent, but no action on reboot. Hopefully, all this can be sorted.
Finally, TWRP backup successful. Assume for now that it would restore, if needed.
Click to expand...
Click to collapse
which root package did you use, Magix or SU and did you have to use no verity disable zip?
EDIT: Nevermind, i'm rooted with SuperSU. have a 4 hour plane ride home so i'll have plenty time to checkout root before i get home..
cortez.i said:
which root package did you use, Magix or SU and did you have to use no verity disable zip?
EDIT: Nevermind, i'm rooted with SuperSU. have a 4 hour plane ride home so i'll have plenty time to checkout root before i get home..
Click to expand...
Click to collapse
Just curious if Knox is now tripped,by using SU ?
For myself,I'm not too worried about it either way,but,those interested in root may want to know,for future Samsung Pay use/possible resale value loss due to Knox 0x1/etc....
KOLIOSIS said:
Just curious if Knox is now tripped,by using SU ?
For myself,I'm not too worried about it either way,but,those interested in root may want to know,for future Samsung Pay use/possible resale value loss due to Knox 0x1/etc....
Click to expand...
Click to collapse
Yes sir as soon as you flash twrp its tripped.
And we need twrp for SU so no way around it.
sent from my Note FE, S8 plus, S7 edge or S6
force70 said:
Yes sir as soon as you flash twrp its tripped.
And we need twrp for SU so no way around it.
sent from my Note FE, S8 plus, S7 edge or S6
Click to expand...
Click to collapse
I figured that much hadn't changed since I last rooted/ROM'd a Samsung device,thanks for confirming. :good:
Again,for myself,it's not much of an issue,I plan on keeping this phone for the long haul (at least 1-2 yrs) & loss of Samsung Pay/Android Pay is of no consequence to me.
KOLIOSIS said:
I figured that much hadn't changed since I last rooted/ROM'd a Samsung device,thanks for confirming. :good:
Again,for myself,it's not much of an issue,I plan on keeping this phone for the long haul (at least 1-2 yrs) & loss of Samsung Pay/Android Pay is of no consequence to me.
Click to expand...
Click to collapse
Ive never cared about knox either....and this phone I will keep until it dies or I do lol
force70 said:
Ive never cared about knox either....and this phone I will keep until it dies or I do lol
Click to expand...
Click to collapse
+1
LMFAO,let's hope for the former................... :highfive:
so... after renaming SecurityLogAgent.apk from TWRP, i've had no problems running root apps, modifying build.prop, etc. google Adaway Vesion 3.2 and install this version and it will configure hosts files without issue (at least on my device). will continue testing and report findings should things changes. thanks @zamzenos for risking your device to confirm that the Note 7 version of TWRP is working.
cortez.i said:
so... after renaming SecurityLogAgent.apk from TWRP, i've had no problems running root apps, modifying build.prop, etc. google Adaway Vesion 3.2 and install this version and it will configure hosts files without issue (at least on my device). will continue testing and report findings should things changes. thanks @zamzenos for risking your device to confirm that the Note 7 version of TWRP is working.
Click to expand...
Click to collapse
The Adaway update worked. Thanks for that. I followed the N7 forum guide, except that I formatted data using TWRP, and used SU as advised. I uninstalled the log agent with Titanium (and as much of Knox as I could find). I no longer get security notifications, but something is still being tripped by any root activity. The apps that won't start don't require root, for instance, Adobe Reader, and sms and call log restore apps. I cannot see any common cause here. SDfix (latest version) says it can't find any groups, so can't do its work.
I'll nose around the S7 & 8 forums and see if any of these problems are turning up there (dev on the N7 was seriously interrupted by the problems caused by sammy's battery restrictions).