Related
How to root Lenovo TAB A7-40 A3500-FL?
[Solved] See the guide below!
Device info:
Model number: Lenovo A3500-FL
Android version: 4.4.2
Kernel version: 3.4.67
Build number: A3500FL_A442_01_25_140823_SE
BB Chip: MT6582
MS Board. A3500FL
Bar code: this was my device's serial number
SW Ver.: ALPS.KK1.MP1.V2.10
Custom Build Verno.: 1408775889
Managed to get cwm and root with this guide: http://forum.xda-developers.com/and...vo-a3500-h-t2879208/post55491817#post55491817
Modified the guide for Lenovo A3500-FL!
EDIT: Also some users have reported that this guide doesn't do the trick or is out-dated, so copypasted the guide from this post here.
Guide
1. Download attachment cwmRecovery.zip and download latest Flash_tool (version 5.1352.0) can be downloaded from here)
1.1. Enable USB-debugging. (How to do this)
2. Manually install the drivers from the attachment a7_40_drivers.zip for the LenovoTablet before plugin it to computer (win7 dirvers work for win8 too).
2.1. To install unsigned/uncertified drivers on Windows 7: http://en.kioskea.net/faq/3914-windows-7-how-to-install-unsigned-drivers
2.2. To install unsigned/uncertified drivers on Windows 8: http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
2.3. After you have disabled the driver signature verification, you can install the drivers like this: Right click My computer, Manage, Device Manager, right click your computer at the top, Add Legacy hardware, next, Install plapla manually, next, Show all Devices, Have a Disk.., Browse to the driver folder where you unzip them, choose example windows7 and the 64 version (win7 drivers work for win8.x too), install every device. Then follow the guide.
(Note: Otherwise Windows only installs the normal automatic drivers and its more difficult to install the other drivers.)
2.4. Plug your device to PC.
3. Download the latest supersu zip file (version 2.46) from attachments or from https://download.chainfire.eu/696/SuperSU/
3.1. Move the zip.-file to the Sdcard.
4. Turn off your device.
5. Unpack cwmRecovery.zip
6. Run Flash_tool.exe with Admin Rights.
7. Chose Scatter-Loading and choose MT6582_Android_scatter.txt (in Recovery folder).
7.1. Now you will see checekd only one checkbox - recovery, if not click on it and choose recovery.img
7.2. Press Download.
7.3. Connect your device.
7.4. Wait few seconds.
8. Have CWM on your device .
9. Unplug your device.
10. . Boot to cmw recovery by turning off your device. Then press and hold VOL DOWN + VOL UP and then also press and hold POWER for about 7 seconds.
10.1. Choose " Install zip from sdcard." (To confrim always use the Power Button)
10.2. Choose "zip from sdcard".
10.3. Select SuperSU-v2.46.zip from sdcard and apply.
10.4. Have a rooted tablet.
It might be necessary to always flash the CWM with the Flashtool directly before you startup the device. Otherwise it will start the original AndroidRecovery again.
It might also be necessary to use different drivers from here.
If the supersu zip doesn't install, try toggling the signature verification to disabled from cwm->install zip from sdcard->toggle signature verification.
Tested and working on Levono A7-40 3500-FL with kitkat update, build number A3500FL_A442_01_25_140823_SE, from ota. Attached screenshot for proof. Also other people have reported that this works for later updates too, for example A3500FL_A442_01_27_141127_SE.
You can update to the latest OTA firmware by first going back to stock recovery. See the second post for the guide.
Thanks and credits go to: @Koli96 and @bobais
How to go back to stock rom/recovery and update to latest Lenovo OTA firmware update
So, it's pretty simple, you take the stock_recovery.zip from the first post, extract it, and replace recovery.img in the recovery folder with the stock one.
Then :
Quote:
4. Turn off your device.
6. Run Flash_tool.exe with Admin Rights
7. Chose Scatter-Loading and choose MT6582_Android_scatter.txt (in Recovery folder)
7.1. Now you will see checekd only one checkbox - recovery, if not click on it and choose recovery.img
7.2.. Press Download
7.3. Connect your device
7.4. Wait few seconds.
And that's it !
On a side note, if it seems stuck on a black screen with a loading circle after factory reset, you have to put the tablet in landscape mode and restart (the shutdown menu appears without any problem) - this issue doesn't seem related to recovery, but a bug within lenovo firmware and the first configuration screen.
Side note 2: The first boot after flashing new update might take 15mins.
Side note 3: After updating to the latest OTA you can go back to cwm recovery with the guide from the first post.
Credits @tenuis
I got the same tablet and I also am looking for a root. :/
Another waiting for rooting lenovo owner.
Same here, i was looking for a root guide and i couldn't find anything.
Does anyone else has a problem with long charging times?
Well it charges long and the charge stays long, so no issue here.
Seems that not that many lenovos root easily, but of course this is a pretty new device(?).
leripe said:
Well it charges long and the charge stays long, so no issue here.
Seems that not that many lenovos root easily, but of course this is a pretty new device(?).
Click to expand...
Click to collapse
OK let's try this
Install mtk drivers
Install USB and adb drivers
Install v root 1.7.8
Now tick adb debugging and connect your device to PC run v root and click root button after device get connected to v root
Let me know if you have any issues
All the best ?
Sent from my x604 using Tapatalk
The-Immortal said:
OK let's try this
Install mtk drivers
Install USB and adb drivers
Install v root 1.7.8
Now tick adb debugging and connect your device to PC run v root and click root button after device get connected to v root
Let me know if you have any issues
All the best ?
Sent from my x604 using Tapatalk
Click to expand...
Click to collapse
Can you link all the drivers?
Edit: Vroot link here: http://vrootdownload.info/vroot1.7.8/
leripe said:
Can you link all the drivers?
Edit: Vroot link here: http://vrootdownload.info/vroot1.7.8/
Click to expand...
Click to collapse
If you have win7 or win8/8.1 USB drivers will automatically installed when you connect device
Adb driver I hope this will work
http://adbdriver.com/downloads/
If it fails make a google search am sure you will find it
Sent from my x604 using Tapatalk
The-Immortal said:
If you have win7 or win8/8.1 USB drivers will automatically installed when you connect device
Adb driver I hope this will work
http://adbdriver.com/downloads/
If it fails make a google search am sure you will find it
Sent from my x604 using Tapatalk
Click to expand...
Click to collapse
Installed everything and tried vroot once again (I have tried it before).
Still not rooted. And btw that vroot at least tries to install bunch of bloatware crap on the pc.
Edit:
I would suggest for anyone who installed Vroot to your pc to scan the whole pc after you uninstall the vroot.
Here are the scanning tools:
Malwarebytes
adwcleaner
superantispyware
hitmanpro
leripe said:
Installed everything and tried vroot once again (I have tried it before).
Still not rooted. And btw that vroot at least tries to install bunch of bloatware crap on the pc.
Edit:
I would suggest for anyone who installed Vroot to your pc to scan the whole pc after you uninstall the vroot.
Here are the scanning tools:
Malwarebytes
adwcleaner
superantispyware
hitmanpro
Click to expand...
Click to collapse
I got a successful root by flashing Recovery.rar from lenovo-forums.ru, (it's easy to google, I'm not allowed to post links) with the included SPFlash Tool and afterwards flashing the needed SU binaryies and apk. However, this will mess up the OTA updates, and I can't find the stock recovery again.
Therefore, I really beg anyone having the stock recovery to post it, enabling us to switch between them, whenever we want to apply any OTAs.
Thanks a lot!
nkr said:
I got a successful root by flashing Recovery.rar from lenovo-forums.ru, (it's easy to google, I'm not allowed to post links) with the included SPFlash Tool and afterwards flashing the needed SU binaryies and apk. However, this will mess up the OTA updates, and I can't find the stock recovery again.
Therefore, I really beg anyone having the stock recovery to post it, enabling us to switch between them, whenever we want to apply any OTAs.
Thanks a lot!
Click to expand...
Click to collapse
Well I very highly doubt that there will be any more updates for a device with this price range. And since the next android version is the L version, which requires more work than before.
Edit2: http://forum.xda-developers.com/android/development/guide-lenovo-a3500-h-t2879208 found this. Tested and it works. Will edit it to the first post.
The same as me
i cant flash update.zip from cwm recovery and need to restore the stock recovery ...
I think flashing the stock rom can solve the problem..
.by using the sp flash tool we can select to flash recovery only ....unticking the others except recovery.img ....you just try to download the stock rom and flash the recovery
Same problem
Heya guys!
I have the same problem here.. I can't run the .zip file from the SD card, it get interrupted every time. Any ideas?
drabuaiad said:
The same as me
i cant flash update.zip from cwm recovery and need to restore the stock recovery ...
I think flashing the stock rom can solve the problem..
.by using the sp flash tool we can select to flash recovery only ....unticking the others except recovery.img ....you just try to download the stock rom and flash the recovery
Click to expand...
Click to collapse
I dont know what you two are trying to do but this thread is about rooting the lenovo A3500-FL not about lenovo stock rom.
Rooting..
Yes indeed, that's what I'm trying to do. Rooting the A3500-FL. According to the instructions you need to install the SuperSU from a zip on your SD card. When I try do that it gets interrupted every time. Installing recovery went well. So I'm not getting what I do wrong? Any ideas?
leripe said:
I dont know what you two are trying to do but this thread is about rooting the lenovo A3500-FL not about lenovo stock rom.
Click to expand...
Click to collapse
Mrosenho said:
Yes indeed, that's what I'm trying to do. Rooting the A3500-FL. According to the instructions you need to install the SuperSU from a zip on your SD card. When I try do that it gets interrupted every time. Installing recovery went well. So I'm not getting what I do wrong? Any ideas?
Click to expand...
Click to collapse
http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip and y ou mean this when you talk about update.zip?
And I hope you are using the install zip from sdcard option and the choose zip from sdcard option?
Boot to cmw.
Install zip from sdcard.
Choose zip from sdcard.
browse to your supersu zip and apply.
Now I also update the first post's guide, so you can check that out too.
Thanks for the help so far. But now I'm starting to doubt that the CWM install went successfully. Let me show you a picture of my screen after a failed install of the UPDATE-SuperSU-v2.02.zip -file. (ht_tps://ww_w.dropb_ox.com/s/1wrnatzjk2gn42h/2014-10-09%2008.50.40.png?dl=0) (slightly modified link because of forum rules, just take out the _) I'm using the "apply update from sdcard" option, then I browse to the SuperSU.zip -file and apply it. Then it starts installation, but aborts it in a few seconds. So am I booting to just a normal recovery mode and not CWM? (Sorry if all this seems totally ignorant, I have only flashed roms before, never rooted a new device)
leripe said:
UPDATE-SuperSU-v2.02.zip and you mean this when you talk about update.zip?
And I hope you are using the install zip from sdcard option and the choose zip from sdcard option?
Boot to cmw.
Install zip from sdcard.
Choose zip from sdcard.
browse to your supersu zip and apply.
Now I also update the first post's guide, so you can check that out too.
Click to expand...
Click to collapse
Yup.. This is the problem. The recovery runs fine from Flash Tool and claims it installs it. (Download ok) But I still don't seem to have CWM on the device. It's just normal recovery mode. So any ideas about the CWM-installation? What could possibly go wrong? I get no error messages. Cheers.
//Mike
Mrosenho said:
Thanks for the help so far. But now I'm starting to doubt that the CWM install went successfully. Let me show you a picture of my screen after a failed install of the UPDATE-SuperSU-v2.02.zip -file. (ht_tps://ww_w.dropb_ox.com/s/1wrnatzjk2gn42h/2014-10-09%2008.50.40.png?dl=0) (slightly modified link because of forum rules, just take out the _) I'm using the "apply update from sdcard" option, then I browse to the SuperSU.zip -file and apply it. Then it starts installation, but aborts it in a few seconds. So am I booting to just a normal recovery mode and not CWM? (Sorry if all this seems totally ignorant, I have only flashed roms before, never rooted a new device)
Click to expand...
Click to collapse
thanks ...
It is work fine for me on a3500 fl with 4.4.2 ver a442_01_26_140911_se
Mrosenho said:
Yup.. This is the problem. The recovery runs fine from Flash Tool and claims it installs it. (Download ok) But I still don't seem to have CWM on the device. It's just normal recovery mode. So any ideas about the CWM-installation? What could possibly go wrong? I get no error messages. Cheers.
//Mike
Click to expand...
Click to collapse
Same for me, what about this @leripe ?
EDIT// Oh, It's working now, tried to flash it one more time, then I held a power button until Lenovo logo appeared and then I pressed Vol UP and Vol DOWN and the CWM came in, thank you! Now my tablet is finally rooted
Hi guys. M currently usimg Nephilim Rom V2. I was trying to flash b594 stock rom. Whenever i tried to install it with stock recovery it just says no update.app is found. Even though i extracted the update.zip file and put it in internal storage in dload folder. I cant even flash it through fastboot because it gives error even though i extracted the img files through Huawei extractor. Can anyone help!!!!
What kind of error fastboot method gives you? I always have went back to stock rom by flashing a rom in fastboot and never had problems with it
While flashing system.img i got error cant load system.img. even though it's in the same folder as adb is. There was also an error whule flashing recovery extracted from update.zip. i was flashing the recovery.img only and it says errot:too many links.
Try to re-download your adb and its related files
cheapster8 said:
Try to re-download your adb and its related files
Click to expand...
Click to collapse
Done that to same result...
So you want your original firmware correct ? If so , go here: http://consumer.huawei.com/nl-en/support/downloads/detail/index.htm?id=82749
Change region (if needed) find your phone and download that.
Once you downloaded it:
1. put it on your sd card
1.1 Since when you download the file, its gonna be in .zip or .rar format, you are gonna need to extract that and what you get out of that file (its gonna be a folder called dload) put that whole thing "dload" on to your sdcard. ( put in in a main folder of your sd card its called root folder, its where your main folders are like pictures, DCIM etc.)
2. turn off your phone leave it for a sec
3. then hold all 3 buttons ( power ,volume up , volume down) and it should start installing the thing.
Hope this helps.
Check this
https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702
It's on honor 4x forum but it says it works on p8lite android 5.0 or higher.
Are you able to install stock recovery through adb? If you are, you can easily use Huawei's recovery to flash the stock firmware
cheapster8 said:
Are you able to install stock recovery through adb? If you are, you can easily use Huawei's recovery to flash the stock firmware
Click to expand...
Click to collapse
I guess u havent read my post coz i had clearly stated that i had tried flashing update through stock recovery but it says no update.app found.
keikari said:
Check this
https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702
It's on honor 4x forum but it says it works on p8lite android 5.0 or higher.
Click to expand...
Click to collapse
Thanks man it was of some help. I now have b896.
hussam.aleem said:
I guess u havent read my post coz i had clearly stated that i had tried flashing update through stock recovery but it says no update.app found.
Click to expand...
Click to collapse
Ahh, sorry, I meant to say that you could try after flashing stock recovery to use EMUI updater to start the flashing.. anyway good that you got it to work
Today, I installed TWRP and rooted my device. I tried to install Xposed but I couldn't get passed the logo screen after rebooting. To try and fix this I did an advanced wipe and got rid of everything...
I know this was very stupid! TWRP is telling me there is no OS if I try to reboot. Is there a ROM I can install to fix this? I was on the stock MM rom and have L31 version.
LeChuck85 said:
Today, I installed TWRP and rooted my device. I tried to install Xposed but I couldn't get passed the logo screen after rebooting. To try and fix this I did an advanced wipe and got rid of everything...
I know this was very stupid! TWRP is telling me there is no OS if I try to reboot. Is there a ROM I can install to fix this? I was on the stock MM rom and have L31 version.
Click to expand...
Click to collapse
I made the same mistake at some point, but managed to get it back up and running.
Download the correct version of "update.zip" for your phone.
In my case it is a L31C432 so I looked for a file called something like VNS-L31C432B160 (stock MM).
Download this (EU version) (if you have a L31C432)
Once the download is completed, rename the downloaded file to "update.zip".
While in Recovery on your phone, and it's connected to your pc, copy the "update.zip" to either the phone's internal memory or the sdcard (doesn't matter).
Grab your phone and go into "Install" in your recovery and find your "update.zip" file.
Slide and let it install it.
Once done, reboot.
Viola!
Remember the "Thanks" button if it helped :good:
SnowmanDK said:
I made the same mistake at some point, but managed to get it back up and running.
Download the correct version of "update.zip" for your phone.
In my case it is a L31C432 so I looked for a file called something like VNS-L31C432B160 (stock MM).
Download this (EU version) (if you have a L31C432)
Once the download is completed, rename the downloaded file to "update.zip".
While in Recovery on your phone, and it's connected to your pc, copy the "update.zip" to either the phone's internal memory or the sdcard (doesn't matter).
Grab your phone and go into "Install" in your recovery and find your "update.zip" file.
Slide and let it install it.
Once done, reboot.
Viola!
Remember the "Thanks" button if it helped :good:
Click to expand...
Click to collapse
Excellent, thank you! For some reason I had no way of signing into my Google account with that version, however I found a previous version in another thread on here and that works perfectly. Thanks.
how to open the recovery mode ????
Hi, why when I try to install the zip it says invalid zip format? I'm trying to install it from a TWRP
spyrkle said:
Hi, why when I try to install the zip it says invalid zip format? I'm trying to install it from a TWRP
Click to expand...
Click to collapse
It's meant to be unzipped and then flashed with the dload method. Hope that helps :good:
Hello,
This question has been posted before but I didn't find a solution on the previous threads.
My VNS-L31C432 doesn't boot past 'Your device is booting now'' after trying to install the C900B300 rollback package. The dload method, as well as the default recovery don't work either. I can access fastboot and flash another rom (using this method: https://forum.xda-developers.com/general/general/guide-flash-variant-version-firmware-t3506404), but so far nothing worked.
I can also install TWRP, access adb and shut down. I wiped everything from my phone in order to do a clean install, didn't work.
I was previously on Marshmallow (VNS-L31C432B161)
Any help would be greatly appreciated!
If your twrp works , try to install the rom with this method : https://forum.xda-developers.com/hu...ota-p9-lite-upgrade-rebrand-tools-pc-t3778839, it worked for me from soft brick. Download and try with FullOTA-MF-PV rom first.
lost3 said:
If your twrp works , try to install the rom with this method : https://forum.xda-developers.com/hu...ota-p9-lite-upgrade-rebrand-tools-pc-t3778839, it worked for me from soft brick. Download and try with FullOTA-MF-PV rom first.
Click to expand...
Click to collapse
Well holy sh** thank you so much!
I saw that you have single sim phone , so you must download rom with odd number ,try to download 391 version.
Download the HWOTA-VNS.zip file and unzip it. Copy the directory HWOTA-VNS to the root of your sd card.
When all of 3 files downloads find the one update_full_hw_xxxx zip (xxx is like e.g vns-l21c391 ) and rename it to update_all_hw.zip, copy the 3 files inside the HWOTA-VNS/upgrade directory.
Reboot to twrp and go to WIPE->Advanced wipe mark data and push Repair or Change File System, if writes: File System : ext4, live it , if its F2FS , hit Change File System and change it to ext4. Go back to main menu , go to install guide to HWOTA-VNS directory and install hwota_update.zip after that the phone will reboot and starts to update.
Is anyone able to run TWRP on P580 running Oreo?
Im having problems with my Tab stuck on a black screen instead of recovery mode.
Please help.
Thanks!!
I found a solution if you don't need TWRP, only Magisk or Root. (Using sm-p580 german version P580KXU1CRJ7)
Short Version:
Install Magisk without TWRP with odin in AP section(google it)
Problem is: Once booted up it will tell you that you have to reset your device because the system recognizes that you modified something.
Solution: Just click on the reset button( Magisk will still be there afterwards).
Long Version
Flash the Oreo firmware onto your device.
Set it up (turn on USB debugging) (or dont, I believe you dont need it for download mode ?)
Unzip the AP part of the firmware you have flashed. You may need a modified version of 7-zip, I needed it, because it couldn't unzip lz4.
Google mcmilk 7 zip and download the github release (I hope I'm allowed to reference it, CREDIT goes to MILKY)
You need the boot.img.
Now install Magisk Manager apk.
Under its settings check " .img.tar" under "return of patched boot-images" (Something like that, mine is german)
Click on install in Magisk Manager apk.
Select make thing with boot img, use the boot.img you have extracted and copied onto your phone.
Magisk will create new patched boot img automatically, copy the finished one u find under your main storage in downloads to your pc.
Go into download mode and flash new boot.img with odin using the AP tab.
Now do the things I described in the Short Version
Afterwards install Magisk Manager Apk.
You need internet connection, because it will prompt you to allow installing additional stuff.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
I like to use Bk disabler to remove bloatware/ other stuff to flash or back up your device
(Please dont remove any of the 3 phone apks, on Nougat it worked to remove two of them, but oreo will continuously give an error message <- I found out that you can uninstall two of them, but dont uninstall the storagedial-programm thats what gives the errormessage.)
Hope it will help you!
Worked !!!
Thank you dear. Its worked for mine in p585 oreo android....
Anyone can search mcmilk 7zip in google and download program to extract boot.img.lz4 and get boot.img :good:
use the last TWRP for Oreo.
old version makes black screen or red stripes.
go in download-mode (power+home+vol-) and install the last TWRP over with Odin.
for Oreo use the last Odin 3.13
it tested, i had the same problem :fingers-crossed:
Latest twrp dose not worked on my device but this solution work fine
I can confirm that this method does work. I used it on my SM-P580 yesterday. I would suggest that you first backup your all of your apps, contacts, photos, etc using SmartSwitch. You will need to restore everything after the tablet tells you that it needs to be reset because it wipes everything. After the restore, you will need to enter all of your accounts and passwords again but at least all of the data will be back.
amosdinh said:
I found a solution if you don't need TWRP, only Magisk or Root. (Using sm-p580 german version P580KXU1CRJ7)
Short Version:
Install Magisk without TWRP with odin in AP section(google it)
Problem is: Once booted up it will tell you that you have to reset your device because the system recognizes that you modified something.
Solution: Just click on the reset button( Magisk will still be there afterwards).
Long Version
Flash the Oreo firmware onto your device.
Set it up (turn on USB debugging) (or dont, I believe you dont need it for download mode ?)
Unzip the AP part of the firmware you have flashed. You may need a modified version of 7-zip, I needed it, because it couldn't unzip lz4.
Google mcmilk 7 zip and download the github release (I hope I'm allowed to reference it, CREDIT goes to MILKY)
You need the boot.img.
Now install Magisk Manager apk.
Under its settings check " .img.tar" under "return of patched boot-images" (Something like that, mine is german)
Click on install in Magisk Manager apk.
Select make thing with boot img, use the boot.img you have extracted and copied onto your phone.
Magisk will create new patched boot img automatically, copy the finished one u find under your main storage in downloads to your pc.
Go into download mode and flash new boot.img with odin using the AP tab.
Now do the things I described in the Short Version
Afterwards install Magisk Manager Apk.
You need internet connection, because it will prompt you to allow installing additional stuff.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
I like to use Bk disabler to remove bloatware/ other stuff to flash or back up your device
(Please dont remove any of the 3 phone apks, on Nougat it worked to remove two of them, but oreo will continuously give an error message <- I found out that you can uninstall two of them, but dont uninstall the storagedial-programm thats what gives the errormessage.)
Hope it will help you!
Click to expand...
Click to collapse
Im not sure if this post belongs here, you link to the T580 TWRP, not the P580.
Is that one compatible with P580?
nill3bor said:
use the last TWRP for Oreo.
old version makes black screen or red stripes.
go in download-mode (power+home+vol-) and install the last TWRP over with Odin.
for Oreo use the last Odin 3.13
it tested, i had the same problem :fingers-crossed:
Click to expand...
Click to collapse
If I do this, will I be able to mount my SD Card as internal storage? 16gb just isnt enough on this tablet.
Do you have to be on oreo already for this to work I'm still on 7.0 and with my system modified I can't upgrade normally
This method root my P585 device but the sim card not working anymore until I odin official rom
also twrp-3.2.3-4-gtaxllte-OMNI6 not work and freeze on Samsung logo
there is no method to root android Oreo P585 Realllllly????
khatkhatik said:
This method root my P585 device but the sim card not working anymore until I odin official rom
also twrp-3.2.3-4-gtaxllte-OMNI6 not work and freeze on Samsung logo
there is no method to root android Oreo P585 Realllllly????
Click to expand...
Click to collapse
This one worked for me on a P585Y. You just have to skip the steps below.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
Click to expand...
Click to collapse
It will also show on the Device Maintenance, just ignore the warning.
You can freeze some of the system apps to prevent it from showing on the notification again.
amosdinh said:
I found a solution if you don't need TWRP, only Magisk or Root. (Using sm-p580 german version P580KXU1CRJ7)
Short Version:
Install Magisk without TWRP with odin in AP section(google it)
Problem is: Once booted up it will tell you that you have to reset your device because the system recognizes that you modified something.
Solution: Just click on the reset button( Magisk will still be there afterwards).
Long Version
Flash the Oreo firmware onto your device.
Set it up (turn on USB debugging) (or dont, I believe you dont need it for download mode ?)
Unzip the AP part of the firmware you have flashed. You may need a modified version of 7-zip, I needed it, because it couldn't unzip lz4.
Google mcmilk 7 zip and download the github release (I hope I'm allowed to reference it, CREDIT goes to MILKY)
You need the boot.img.
Now install Magisk Manager apk.
Under its settings check " .img.tar" under "return of patched boot-images" (Something like that, mine is german)
Click on install in Magisk Manager apk.
Select make thing with boot img, use the boot.img you have extracted and copied onto your phone.
Magisk will create new patched boot img automatically, copy the finished one u find under your main storage in downloads to your pc.
Go into download mode and flash new boot.img with odin using the AP tab.
Now do the things I described in the Short Version
Afterwards install Magisk Manager Apk.
You need internet connection, because it will prompt you to allow installing additional stuff.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
I like to use Bk disabler to remove bloatware/ other stuff to flash or back up your device
(Please dont remove any of the 3 phone apks, on Nougat it worked to remove two of them, but oreo will continuously give an error message <- I found out that you can uninstall two of them, but dont uninstall the storagedial-programm thats what gives the errormessage.)
Hope it will help you!
Click to expand...
Click to collapse
this works great! thanks!
2 side notes on the process:
1. Magisk no longer provides " .img.tar" patched files, so a tool like "Tar-tool" is required to convert the file from the ".img" type. The patched file should be renamed "boot.img" before conversion in order to be succesfully flashed by Odin.
2. like f4vr said, freeze the apps that give the error notification or just disable the specific notification. Hiding them in Magisk Hider does not seem to work
Cheers, and thanks again for the guide!
Hello Gyus,
I managed to root the device with the method posted by @amosdinh (Thank you so much). Now I'm trying to configure adoptable storage. So far I didn't achieve this goal. ADB commands doesn't work and I can't install the ASPlugin.zip needed by Root Essentials to set adoptable storage by the app.
TWRP for P585 is corrupted, gives blue/red lines screen. The dev that maintains the code is absent since march. I'm out of luck on this. If anyone have a idea to get adoptable storage on this device while using Oreo, please comment.
Thanks!
---------- Post added at 11:17 AM ---------- Previous post was at 11:11 AM ----------
artaeun said:
this works great! thanks!
2 side notes on the process:
1. Magisk no longer provides " .img.tar" patched files, so a tool like "Tar-tool" is required to convert the file from the ".img" type. The patched file should be renamed "boot.img" before conversion in order to be succesfully flashed by Odin.
2. like f4vr said, freeze the apps that give the error notification or just disable the specific notification. Hiding them in Magisk Hider does not seem to work
Cheers, and thanks again for the guide!
Click to expand...
Click to collapse
Just renaming magisk_patched.img to boot.img and adding to .tar file by 7zip worked for me.
We should ask a dev to update twrp for android 8.1
khatkhatik said:
This method root my P585 device but the sim card not working anymore until I odin official rom
also twrp-3.2.3-4-gtaxllte-OMNI6 not work and freeze on Samsung logo
there is no method to root android Oreo P585 Realllllly????
Click to expand...
Click to collapse
Same freeze for me with the Omni - can't do anything outside of access download mode
Same Problem
cmzizi said:
Is anyone able to run TWRP on P580 running Oreo?
Im having problems with my Tab stuck on a black screen instead of recovery mode.
Please help.
Thanks!!
Click to expand...
Click to collapse
I have the same problem. It just keep getting to the bad TWRP, it seems that it does not work with the SM-P580. I had to flash stock firmware to get it back to work.
luinkazofeifa said:
I have the same problem. It just keep getting to the bad TWRP, it seems that it does not work with the SM-P580. I had to flash stock firmware to get it back to work.
Click to expand...
Click to collapse
Really wish this wasn't the case. I'd actually keep this thing if it had a working TWRP.
On my SM-P580 I used Odin and TWRP I don't get the black screen but when I reboot to get into TWRP recovery mode it shows the padlock and says swipe to unlock. Tried many times bit cannot swipe and cannot get past this. All I want is to be able to use the SD card as internal storage. HELP???? Thanks!!
luinkazofeifa said:
I have the same problem. It just keep getting to the bad TWRP, it seems that it does not work with the SM-P580. I had to flash stock firmware to get it back to work.
Click to expand...
Click to collapse
thanks in advanced
where can i find stock firmware?
I've just installed magisk using TWRP via command line. P580
I've just installed magisk using TWRP via command line.
Read the entire post before trying this yourself.
I installed the latest TWRP, the one that bugs and doesn't display anything, this allows to root without wiping data. I'm running the latest korean firmware for P580.
Just do this:
1. Launch TWRP and INMEDIATELY LOCK YOUR SCREEN. (I got ghost stripes that disappeared after 2 days when testing this, work with low light so you can notice your screen whenever it tuens on) Please don't forget this point, don't [temporarily] damage your screen as I did.
2. adb push Magisk-v[Current version].zip external_sd
3. adb shell
4. twrp install external_sd/Magisk-v[Current version].zip
After this you just need to install MagiskManager-v[Current version].apk and you will be all done.
But there is one thing...
If you ever get into recovery mode, there is no way out without using adb as far as I know. You can launch download mode and cancel it but you'll boot back to TWRP.
When in twrp touching your screen or any button will wake the device up and will start burning the ghost image to your screen.
So if you know of a method for rebooting to system without using adb, please let me know.
Also a solution for this would be to flash back the stock recovery, wich may or may not force to wipe system, that something that needs to be tested tho.
Update: Ok so, you can use a handy tool called MTKroot on recovery.img.lz4 to get recovery.img, then use 7z to pack it into a tar file and flash that tar file with odin (AP, same as TWRP)
This way you will not have a 0.001% chance of random boot into recovery mode and damage your screen