Related
Hi all again. Today i write guide for noob
How Flash Stock rom???
1. First download rom to your pc
2. When you download rom open in winrar and check pack
3. If you have only one file update.app you can extrack but first you must create in desktop folder named dload and extract there.
4. If you have root and want flash full rom you can do it but you must have stock recovery.
5. Copy dload to your extsdcard and go to dialpad and write *#*#2846579#*#* and choise 4 and 1.
6. Your phone now power off and flash new firmware.
7. When its finish your phone boot again with new firmware.
P.s Flash firmware for your region or you be have bootloop or software brick and if you have you must have unlocked bootloader to reanimate your mate7
How Flash Ota update???
1. Download Ota update to your pc
2. Open using winrar and check do you have all folder and file look for exsample
cust
META-INF
patch
system
update.app
3. If you have that same folder do not extract from update.zip
4. Create dload on desktop and copy there update.zip and now copy to your extsdcard and go to dialpad and write *#*#2846579#*#* and choise 4 and 1.
5. Your phone now power off and flash new firmware.
6. When its finish your phone boot again with new firmware.
How restore twrp backup ???
1. If you have lollipop you must use pc to create folders:
TWRP/BACKUPS/ here you must put downloaded backup
2. If you have marshmallow you must use pc to create folders:
TWRP/BACKUPS/YOUR SERIAL NUMBER/ and here you must put downloaded backup
3. Download backup for your mate7 and extraxt to desktop
4. Copy all file to create folder and now copy TWRP folder to your internal sdcard or ext sdcard.
5. Power off your phone and go to TWRP RECOVERY
6. Select storege where you copy backup and now go restore.
7. If you see backup you can now restore.
8. Whene its restore go back and do it wipe data/cache/dalvick cache and reboot
9. First boot can make very long time and wait when in boot to system.
P.s When you use TWRP 2.8.7.X and do ot wipe data you lose your file and vendor country but when you use TWRP 3.0.2.0 you don't lose. If you lose you must restore using tool from this topic but you must be root
http://forum.xda-developers.com/mate-7/development/tool-srk-tool-huawei-beta-02-20160501-t3369990
How to reanimater your mate after bootloap???
We have 2 methode for now.
Firts it's restore twrp backup and secend its fastboot and downgrade pack
If you use twrp backup and its work very good for you but if dont work you must use fastboot method
1. Power off device and go to fastboot
2. Extract file from update.app for lollipop :
- system
- cust
- boot
- recovery
- userdata
for Marshmallow extract :
- system
- cust
- boot
- recovery
3. Install adb drive from this topic
http://forum.xda-developers.com/showthread.php?p=48915118
and copy all file to C:/adb on your windows
4. Open CMD as administator and write this commads
cd C:/adb
adb fastboot
Now you on fastboot mode
When you extract file frome update.app you must rename file :
10.boot.img to boot.img
11.recovery.img to recovery.img
13.cust.img to cust.img
14.system.img to system.img
If you remane you can flash img file using fastboot methode using cmd
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
fastboot flash system system.img
It's take very long but wait. When its finish take micro sd adapter and put you micro sdcard and connect to pc and copy full rom :
If you use lp file because you have bootloop on lp you must flash that same rom what you flash file using fastboot
and do it that same for marshmallow
when you copy put your adapter to slot of microsdcard in your mate7
Now power of your phone and try go to flash method using 3 bottom on you mate7
VOL+ POWER + VOL- when you seescreen on realese power and wait. Now you see how rom its flash.
If you have error you must use downgrade pack from mm to lp and flash.
When its flash you must flash lp.
If you have error you must use downgrde pack from lp to kk and flash.
When its finish you must flash kk rom.
Now you back to rom after bootloop and you can try again flash rom what you want.
Finish guide for noob
Cheers :highfive:
Thanks for the guide. I want to restore to MM from kk using twrp? Is it possible? I only wait 5 minutes after restore reboot then I think something must be wrong so I restore my own backup. I will give a try again.
Sent from my HUAWEI MT7-L09 using XDA-Developers mobile app
No you can't do it you must first flash kk second lp and then you flash mm
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka
chudy_85 said:
How restore twrp backup ???
1. If you have lollipop you must use pc to create folders:
TWRP/BACKUPS/ here you must put downloaded backup
2. If you have marshmallow you must use pc to create folders:
TWRP/BACKUPS/YOUR SERIAL NUMBER/ and here you must put downloaded backup
3. Download backup for your mate7 and extraxt to desktop
4. Copy all file to create folder and now copy TWRP folder to your internal sdcard or ext sdcard.
5. Power off your phone and go to TWRP RECOVERY
6. Select storege where you copy backup and now go restore.
7. If you see backup you can now restore.
8. Whene its restore go back and do it wipe data/cache/dalvick cache and reboot
9. First boot can make very long time and wait when in boot to system.
P.s When you use TWRP 2.8.7.X and do ot wipe data you lose your file and vendor country but when you use TWRP 3.0.2.0 you don't lose. If you lose you must restore using tool from this topic but you must be root
http://forum.xda-developers.com/mate-7/development/tool-srk-tool-huawei-beta-02-20160501-t3369990
Click to expand...
Click to collapse
Hi buddy, your guide is gold. I explain what i did up to now. I wanna know how to proceed safely.
1) 2 year old MT7-L09 Mate 7. Long time ago i go bootloader unlocked, rooted and updated to lollipop stock. dont know which firmware version.
2) TWRP 2.8.7.0. Wanted to factory reset after long time no using the phone, ended up wiping OS and god knows what else.
3) Can access fastboot and TWRP.
4) Tried stock recovery and 3 button method to downgrade or install stock update.app. Nothing worked it always got stuck at 90%.
Up to there nothing worked. I guess i must have damaged some critical files.
Then i found your guide and wanted to try making a lollipop restore from TWRP. Found a file.
Now, if i understood what you have written in red, i may have wiped oem information like country and vendor. Maybe thats because i cant install stock from huawei.
How can i restore that info? is there any way i can backup my bootloader info, or retrive my country and vendor info?
How do you suggest me to proceed safely.
Thanks
Sebastian
lungolok said:
Hi buddy, your guide is gold. I explain what i did up to now. I wanna know how to proceed safely.
1) 2 year old MT7-L09 Mate 7. Long time ago i go bootloader unlocked, rooted and updated to lollipop stock. dont know which firmware version.
2) TWRP 2.8.7.0. Wanted to factory reset after long time no using the phone, ended up wiping OS and god knows what else.
3) Can access fastboot and TWRP.
4) Tried stock recovery and 3 button method to downgrade or install stock update.app. Nothing worked it always got stuck at 90%.
Up to there nothing worked. I guess i must have damaged some critical files.
Then i found your guide and wanted to try making a lollipop restore from TWRP. Found a file.
Now, if i understood what you have written in red, i may have wiped oem information like country and vendor. Maybe thats because i cant install stock from huawei.
How can i restore that info? is there any way i can backup my bootloader info, or retrive my country and vendor info?
How do you suggest me to proceed safely.
Thanks
Sebastian
Click to expand...
Click to collapse
You can manual push oem info to correct partition. What country you from
chudy_85 said:
You can manual push oem info to correct partition. What country you from
Click to expand...
Click to collapse
Im form Argentina. Phone was bought in US. I dont mind putting any country version as long as i can bring it back alive.
Luckily i have saved phone imei, serial number and id in evernote. Maybe that can help to figure it out.
Do you have a procedure or guide to do that you are suggesting?
if you have unlocked bootloader you can try use SRKToolHuawei-Lod-Chong-V2.0-20161002 to change oem info and then try flash correct your rom using dload method. But if you change region you must unlock again bootloader but when you go to fastboot you have unlocked. Unlock again because its locked
Today, I installed TWRP and rooted my device. I tried to install Xposed but I couldn't get passed the logo screen after rebooting. To try and fix this I did an advanced wipe and got rid of everything...
I know this was very stupid! TWRP is telling me there is no OS if I try to reboot. Is there a ROM I can install to fix this? I was on the stock MM rom and have L31 version.
LeChuck85 said:
Today, I installed TWRP and rooted my device. I tried to install Xposed but I couldn't get passed the logo screen after rebooting. To try and fix this I did an advanced wipe and got rid of everything...
I know this was very stupid! TWRP is telling me there is no OS if I try to reboot. Is there a ROM I can install to fix this? I was on the stock MM rom and have L31 version.
Click to expand...
Click to collapse
I made the same mistake at some point, but managed to get it back up and running.
Download the correct version of "update.zip" for your phone.
In my case it is a L31C432 so I looked for a file called something like VNS-L31C432B160 (stock MM).
Download this (EU version) (if you have a L31C432)
Once the download is completed, rename the downloaded file to "update.zip".
While in Recovery on your phone, and it's connected to your pc, copy the "update.zip" to either the phone's internal memory or the sdcard (doesn't matter).
Grab your phone and go into "Install" in your recovery and find your "update.zip" file.
Slide and let it install it.
Once done, reboot.
Viola!
Remember the "Thanks" button if it helped :good:
SnowmanDK said:
I made the same mistake at some point, but managed to get it back up and running.
Download the correct version of "update.zip" for your phone.
In my case it is a L31C432 so I looked for a file called something like VNS-L31C432B160 (stock MM).
Download this (EU version) (if you have a L31C432)
Once the download is completed, rename the downloaded file to "update.zip".
While in Recovery on your phone, and it's connected to your pc, copy the "update.zip" to either the phone's internal memory or the sdcard (doesn't matter).
Grab your phone and go into "Install" in your recovery and find your "update.zip" file.
Slide and let it install it.
Once done, reboot.
Viola!
Remember the "Thanks" button if it helped :good:
Click to expand...
Click to collapse
Excellent, thank you! For some reason I had no way of signing into my Google account with that version, however I found a previous version in another thread on here and that works perfectly. Thanks.
how to open the recovery mode ????
Hi, why when I try to install the zip it says invalid zip format? I'm trying to install it from a TWRP
spyrkle said:
Hi, why when I try to install the zip it says invalid zip format? I'm trying to install it from a TWRP
Click to expand...
Click to collapse
It's meant to be unzipped and then flashed with the dload method. Hope that helps :good:
Hello,
I tried to flash the RessurectionRemix ROM and it was working well except the LTE so I decided to get back to EMUI.
Problem, i took the backup of bluesmoothie and flashed it but the phone never finish to boot.... (I didn't wipe anything, i thought that the restore function of TWRP was doing everything, am I wrong ?)
Moreover, the TWRP recovery can't access the content of my ext sdcard where the RR ROM is located and even if i put this rom to internal storage, i got the ERROR 7 (this is for deive: can; you have generic_a53)
Do you know what can I do to :
- Come back to EMUI
- Unroot the phone
- Re-lock the bootloader
The files of the TWRP backup are located on the sdcard, if i wipe data/system/cache, will it delete these files ?
Infos :
- Bootloader unlocked
- TWRP of Garak (but still have ERROR 7 now)
Thank you very much
First you need to flash the stock recovery in fastboot. After that you need to put the update.app in a folder called dload in your internal storage.
wangdaning said:
First you need to flash the stock recovery in fastboot. After that you need to put the update.app in a folder called dload in your internal storage.
Click to expand...
Click to collapse
Okay but where can I find the stock recovery ?
Then, do i have to flash it via ADB like i did with TWRP ?
After that, where can I find the "update.app" that you are talking about ?
If i'm right, you're telling me that i can't go back to EMUI without flashing the stock recovery ?
That is correct. First use firmware finder to get the update.app. There is a firmware extractor tool for Huawei firmware. Use it to extract the recovery.img and flash with fastboot.
wangdaning said:
That is correct. First use firmware finder to get the update.app. There is a firmware extractor tool for Huawei firmware. Use it to extract the recovery.img and flash with fastboot.
Click to expand...
Click to collapse
First of all, thank you very much for your anwser, it's very kind of you.
If i understood everything, that's what i have to do :
- Download one of the Huawei firmwares with Huawei Finder (Better get the B100 or another one ?)
- Extract the recovery.img with the update.app from Huawei Finder
- Flash the stock recovery with ADB
Then :
- I put the update.app that i get through the Huawei Finder in the dload folder of the internal storage (If i flash the stock recovery, will I be able to put files in the storage ?)
- I reboot the phone in recovery and normally, it should install the EMUI rom
At the end, my phone will no longer have a custom recvery, bootloader unlocked and root status ?
iSpeeX said:
First of all, thank you very much for your anwser, it's very kind of you.
If i understood everything, that's what i have to do :
- Download one of the Huawei firmwares with Huawei Finder (Better get the B100 or another one ?)
- Extract the recovery.img with the update.app from Huawei Finder
- Flash the stock recovery with ADB
Then :
- I put the update.app that i get through the Huawei Finder in the dload folder of the internal storage (If i flash the stock recovery, will I be able to put files in the storage ?)
- I reboot the phone in recovery and normally, it should install the EMUI rom
At the end, my phone will no longer have a custom recvery, bootloader unlocked and root status ?
Click to expand...
Click to collapse
Yes, that's correct. But you have to put update.app in dload folder on your SD card as far as I know. That's how I did it.
I couldn't find B100 on Firmware Finder and I've got relocked bootloader on Nougat.
Yes, you will need to copy the update.app to internal storage in TWRP, then flash the stock recovery. After flashing you need to hold all three buttons when booting (just like getting into TWRP. After update you will have no custom recovery, no root, and it should lock bootloader.
wangdaning said:
Yes, you will need to copy the update.app to internal storage in TWRP, then flash the stock recovery. After flashing you need to hold all three buttons when booting (just like getting into TWRP. After update you will have no custom recovery, no root, and it should lock bootloader.
Click to expand...
Click to collapse
I did everything, now it's booting but it's VERY VERY LONG... I'll wait and pray
iSpeeX said:
I did everything, now it's booting but it's VERY VERY LONG... I'll wait and pray
Click to expand...
Click to collapse
If it doesn't boot, then boot in recovery and do a factory reset and then it should boot. It happened to me and that's what I did.
#Henkate said:
If it doesn't boot, then boot in recovery and do a factory reset and then it should boot. It happened to me and that's what I did.
Click to expand...
Click to collapse
I still have the warning message "your phone is unlocked", is it normal ?
When i boot into recovery it's displaying "eRecovery" and ask me to download the new update of recovery but it fails when getting the package. I can only reboot and turn off :/
Thank you as always
iSpeeX said:
I still have the warning message "your phone is unlocked", is it normal ?
When i boot into recovery it's displaying "eRecovery" and ask me to download the new update of recovery but it fails when getting the package. I can only reboot and turn off :/
Thank you as always
Click to expand...
Click to collapse
You shouldn't have that message anymore.
Are you sure that the update.app got installed? @wangdaning told you to put it on dload folder in internal memory. I don't know if that is right or if it works, but I've put it in dload folder on sdcard when I've installed update.app.
#Henkate said:
You shouldn't have that message anymore.
Are you sure that the update.app got installed? @wangdaning told you to put it on dload folder in internal memory. I don't know if that is right or if it works, but I've put it in dload folder on sdcard when I've installed update.app.
Click to expand...
Click to collapse
Well i wasn't in front of it when it finished and I just did it : the update stops at 5% and then the phone reboot....
Do you know what do I have to do ? I took the recovery from the last B350 on huawei firmware finder
EDIT1 : but this time in recovery i can Reboot, Wipe factory reset, Wipe cache
iSpeeX said:
Well i wasn't in front of it when it finished and I just did it : the update stops at 5% and then the phone reboot....
Do you know what do I have to do ? I took the recovery from the last B350 on huawei firmware finder
EDIT1 : but this time in recovery i can Reboot, Wipe factory reset, Wipe cache
Click to expand...
Click to collapse
You can read in this post the steps I've used to relock the bootloader and get update (official I guess) through Settings > System update. Just "click to show content".
#Henkate said:
You can read in this post the steps I've used to relock the bootloader and get update (official I guess) through Settings > System update. Just "click to show content".
Click to expand...
Click to collapse
The problem is that the phone doesnt finish to but anymore... i can't do things in menu.
When you talk about SD card, it's the external sd card ? Because i don't have access to it anymore, but i have the partition SD Card
When you installed the B340 update, you seen the percent growing up and had a "success" message ? Because, for me, the update is stuck at 5% and then it reboot the phone
iSpeeX said:
The problem is that the phone doesnt finish to but anymore... i can't do things in menu.
When you talk about SD card, it's the external sd card ? Because i don't have access to it anymore, but i have the partition SD Card
When you installed the B340 update, you seen the percent growing up and had a "success" message ? Because, for me, the update is stuck at 5% and then it reboot the phone
Click to expand...
Click to collapse
Yes, I mean external sdcard.
Reinstall TWRP and restore bluesmoothie's backup and then flash the stock recovery again.
I didn't have any issues with installing the B340 firmware. It was installed successfully.
Try to follow the steps I've used. You shouldn't have any problem.
#Henkate said:
Yes, I mean external sdcard.
Reinstall TWRP and restore bluesmoothie's backup and then flash the stock recovery again.
I didn't have any issues with installing the B340 firmware. It was installed successfully.
Try to follow the steps I've used. You shouldn't have any problem.
Click to expand...
Click to collapse
Okay i'm going to try it right away
My external sd card doesnt show up anymore when i connect it to my PC, i don't know why
I mentioned internal SD card because you said your external was not recognized, but you might try putting the dload folder on external. I have done it both ways. Sometimes the update through stock recovery is finicky. If it doesn't finish run it again. Also, make sure your USB is disconnected, as may Huawei users have mentioned this causes it to freeze. If it still fails, try dloading a different update from firmware finder.
Did it work?
I didn't have so much time these days but I did it and it worked for the 1st part (flash bouesmoothie's backup). Tomorrow I'll do the final step! Thank you again
Here I am :
1 : flashed stock recovery from B350 and i don't have the "unlocked" message anymore !
2 : The update B350 made it, "update success"
3 : It doesn't boot for now
4 : The boot doesn't end
-----
1 : flashed TWRP recovery, launched a factory reset in the same time
2 : Phone booting again on B100
-----
1 : flashed stock recovery from b350
2 : flashed b350 update
3 : Everything is fine !
Thank you for your help !!!
Long story short; I wiped system and everything on this device, so all I really have on it working now is TWRP. The official FullOTA updates fail in TWRP, erecovery fails, and recovery in hisuite fails. I assume the last two will fail because of the third party recovery. So I guess I'm wondering if anyone can point me in the direction of the official recovery that I can fastboot flash, or any other way to reload the ROM?
Full story; I got this new tablet last week, and I unlocked, installed TWRP, and rooted successfully. Then I broke google services with a dodgy gapps install that I didn't need, couldnt figure out how to unflash it, and wiped everything like an idiot.
Thanks if anyone can help.
Update; I guess the root of the problem is that I'm unable to mount /data? Any actions I take in TWRP give me the error "Failed to mount '/data'", including if I do a wipe data or try to change the file system. I've used "Huawei Update Extractor" to see if there is a data.img, but it looks like no.
Update 2: Still not sure what this was all about, but I extracted system.img from "Huawei Update Extractor" and fastboot flashed that, and it looks like everything is working again. Haven't checked TWRP to see if it still gives errors on the data partition, but I'm at least in the OS and google play services are working.
Download latest firmware for your device from Huawei server and extract it. Make a new folder on external sdcard, named dload. Copy extracted file (update.app) in this folder. Power off device and turn it on using 3 button method: volume up + volume down + power - old all 3 buttons simultaneously.
It will start the update/flash process. It will install factory firmware on your device.
When you download Firmware, in the archive you will find these steps (PDF file).
Next time you can try this
Sent from my BTV-DL09 using Tapatalk
30adi said:
Download latest firmware for your device from Huawei server and extract it. Make a new folder on external sdcard, named dload. Copy extracted file (update.app) in this folder. Power off device and turn it on using 3 button method: volume up + volume down + power - old all 3 buttons simultaneously.
It will start the update/flash process. It will install factory firmware on your device.
When you download Firmware, in the archive you will find these steps (PDF file).
Next time you can try this
Click to expand...
Click to collapse
Wrong. He installed TWRP so there is not a functional recovery.
The right thing is to extract the Recovery from the Update.app and flash it, then use the dload method.
nicolap8 said:
Wrong. He installed TWRP so there is not a functional recovery.
The right thing is to extract the Recovery from the Update.app and flash it, then use the dload method.
Click to expand...
Click to collapse
Actually, I did try that, but I put stock recovery back on and and tried the dload method, it still failed int he same way as with TWRP installed.
What ended up working was extracting system.img from the update and fastboot flashing it. Not very intuitive. I am still getting "Failed to mount '/data'" errors in TWRP now, but haven't looked much into it yet. That is weird, I guess if everything is working it is more a problem with TWRP, because if everything is running and booting /data should be fine.
i have an P9lite VNS-L31,that was soft brooking!!after fixed from smartphone fixer with some BOX it became working with an L21 firmware build number (VNS-L21C185B3XX),it was working fine with some bug like Bluetooth not working ,and it auto update to (VNS-L21C185B399) and nothing is working no camera no Bluetooth no virtual keyboard.
i need some help to how rebrand downgrade the phone to original VNS-L31C185B150 (original rom).
thank you
kriminel87 said:
i have an P9lite VNS-L31,that was soft brooking!!after fixed from smartphone fixer with some BOX it became working with an L21 firmware build number (VNS-L21C185B3XX),it was working fine with some bug like Bluetooth not working ,and it auto update to (VNS-L21C185B399) and nothing is working no camera no Bluetooth no virtual keyboard.
i need some help to how rebrand downgrade the phone to original VNS-L31C185B150 (original rom).
thank you
Click to expand...
Click to collapse
please help me anyone !!!
kriminel87 said:
please help me anyone !!!
Click to expand...
Click to collapse
Hey dude,
i searched a bit for the correct OEMinfo file to convert
your phone from L21 to L31 version, but your CUST (C185) seem
to be non-existent at the moment...
Sincerely i never seen anyone doing this kind of conversion, but it may work...
Under your responsibility and my guide, you could try to convert it to the European CUST (C432).
If i'm correct, your device is running android 7 and it is single sim, can you confirm this ?
So, if you agree and will not point your finger at me (for a bad scenario), i can tell you how do this.
Cheers
Dadditz said:
Hey dude,
i searched a bit for the correct OEMinfo file to convert
your phone from L21 to L31 version, but your CUST (C185) seem
to be non-existent at the moment...
Sincerely i never seen anyone doing this kind of conversion, but it may work...
Under your responsibility and my guide, you could try to convert it to the European CUST (C432).
If i'm correct, your device is running android 7 and it is single sim, can you confirm this ?
So, if you agree and will not point your finger at me (for a bad scenario), i can tell you how do this.
Cheers
Click to expand...
Click to collapse
thank you for the response!!if you have any recommendation yes i will take it!my phone is working android 7 duel sim!if i convert it to european CUST is there any chance that wil be simlocked ??
kriminel87 said:
thank you for the response!!if you have any recommendation yes i will take it!my phone is working android 7 duel sim!if i convert it to european CUST is there any chance that wil be simlocked ??
Click to expand...
Click to collapse
Dude you have to use a custom recovery (TWRP)
to be able to flash a different oeminfo file
and the appropriate firmware.
So you need to unlock your bootloader first.
When you done this come back for the files and the guide...
The European no brand firmware will not lock any sim
and i'm pretty sure your sim will continue to normally work,
but it's your choice, you can ever keep your device as it is...
Cheers
Dadditz said:
Dude you have to use a custom recovery (TWRP)
to be able to flash a different oeminfo file
and the appropriate firmware.
So you need to unlock your bootloader first.
When you done this come back for the files and the guide...
The European no brand firmware will not lock any sim
and i'm pretty sure your sim will continue to normally work,
but it's your choice, you can ever keep your device as it is...
Cheers
Click to expand...
Click to collapse
ok i will do it bat i need some help like what is the best working TWRP and what is the best working European firmware!and oeminfo i will use i have to extract it from the firmware or i have to found it from somewhere else!!thank you
kriminel87 said:
ok i will do it bat i need some help like what is the best working TWRP and what is the best working European firmware!and oeminfo i will use i have to extract it from the firmware or i have to found it from somewhere else!!thank you
Click to expand...
Click to collapse
Dude,
you have to not worry about twrp, firmware and oeminfo...
i can provide you those files.
Remove all safeties (pin / pattern / fingerprints),
possibly do a backup of your most important files
as unlocking the bootloader will factory reset your device.
When you're ready I will tell you which files and the guide to convert ...
Cheers
Dadditz said:
Dude,
you have to not worry about twrp, firmware and oeminfo...
i can provide you those files.
Remove all safeties (pin / pattern / fingerprints),
possibly do a backup of your most important files
as unlocking the bootloader will factory reset your device.
When you're ready I will tell you which files and the guide to convert ...
Cheers
Click to expand...
Click to collapse
unlocking the bootloader done,what next !!!:good:
kriminel87 said:
unlocking the bootloader done,what next !!!:good:
Click to expand...
Click to collapse
Dude sorry for answering you late,
i'm little busy atm.
THIS is Hassan's 3.1.1-1 recovery, your TWRP;
Your dualSIMC432OEMinfo.zip file;
This is HuRUpdater04 script (zip) file;
The Firmware (latest VNS-L31C432B418),
they are three files;
1 - update .zip;
2 - update_data_full_public .zip;
3 - update_full_VNS-L31_hw_eu .zip;
Let file 1 the same name,
rename file 2 from update_data_full_public TO update_data_public,
rename file 3 from update_full_VNS-L31_hw_eu TO update_all_hw.
Names must mandatory match the ones I wrote, otherwise it won't work.
This is the procedure:
Use your PC, make a folder and rename it L31C432B418.
Copy files 1-2-3 (renamed) and HuRUpdater04.zip file into that folder.
(if you want you can keep the TWRP copying the .img file into that folder too).
Copy the folder into the SD.
Copy the OEMinfo file wherever you want into the SD.
Put the SD into the device...
Reboot into recovery and format DATA
(wipe>advanced wipe>tick data and tap format in the bottom right> type 'yes').
Reboot again recovery and wipe everything except SD
(wipe>advanced wipe>tick everything except sd).
Go in main menu, tap install, find and select OEMinfo file, let it flash...
When finished go in main menu and select REBOOT then Bootloader.
Once booted, connect the phone to your PC and
unlock again the bootloader. (quickly disconnect it from PC)
Device should automatically reboot into the recovery otherwise you can do
holding vol + and power button.
Now tap install, find your L31C432B418 folder,
select (only) HuRUpdater04.zip file and let it flash...
Your device should reboot into the system correctly,
if not (if passes over 15 mins) reboot into the e-recovery and
do a factory reset + wipe cache.
Done !!
i did what you told me using this method https://forum.xda-developers.com/hu...ite-upgrade-rebrand-tools-pc-t3778839,ulocked boot loader installed TWRP recovery than used oem info for L31C432 and i download last full ota firmwire for it !!worked fine
thank you for guiding me!! i appreciate your help :victory::victory::good:
kriminel87 said:
unlocking the bootloader done,what next !!!:good:
Click to expand...
Click to collapse
Dude sorry for answering you late,
i'm little busy atm.
THIS is Hassan's 3.1.1-1 recovery, your TWRP;
Your dualSIMC432OEMinfo.zip file;
This is HuRUpdater04 script (zip) file;
The Firmware (latest VNS-L31C432B418),
they are three files;
1 - update .zip;
2 - update_data_full_public .zip;
3 - update_full_VNS-L31_hw_eu .zip;
Let file 1 the same name,
rename file 2 from update_data_full_public TO update_data_public,
rename file 3 from update_full_VNS-L31_hw_eu TO update_all_hw.
Names must mandatory match the ones I wrote, otherwise it won't work.
This is the procedure:
Use your PC, make a folder and rename it L31C432B418.
Copy files 1-2-3 (renamed) and HuRUpdater04.zip file into that folder.
(if you want you can keep the TWRP copying the .img file into that folder too).
Copy the folder into the SD.
Copy the OEMinfo file wherever you want into the SD.
Put the SD into the device...
Flash the 3.1.1-1 recovery into your device:
( fastboot flash recovery 'nameofrecovery'.img )
You can also use some apps to flash .img files...
Reboot into recovery and format DATA
(wipe>advanced wipe>tick data and tap format in the bottom right> type 'yes').
Reboot again recovery and wipe everything except SD
(wipe>advanced wipe>tick everything except sd).
Go in main menu, tap install, find and select OEMinfo file, let it flash...
When finished go in main menu and select REBOOT then Bootloader.
Once booted, connect the phone to your PC and
unlock again the bootloader. (quickly disconnect it from PC)
Device should automatically reboot into the recovery otherwise you can do
holding vol + and power button.
Now tap install, find your L31C432B418 folder,
select (only) HuRUpdater04.zip file and let it flash...
Your device should reboot into the system correctly,
if not (if passes over 15 mins) reboot into the e-recovery and
do a factory reset + wipe cache.
Done !!
If you have any doubt, just let me know....
Dadditz said:
Dude sorry for answering you late,
i'm little busy atm.
THIS is Hassan's 3.1.1-1 recovery, your TWRP;
Your dualSIMC432OEMinfo.zip file;
This is HuRUpdater04 script (zip) file;
The Firmware (latest VNS-L31C432B418),
they are three files;
1 - update .zip;
2 - update_data_full_public .zip;
3 - update_full_VNS-L31_hw_eu .zip;
Let file 1 the same name,
rename file 2 from update_data_full_public TO update_data_public,
rename file 3 from update_full_VNS-L31_hw_eu TO update_all_hw.
Names must mandatory match the ones I wrote, otherwise it won't work.
This is the procedure:
Use your PC, make a folder and rename it L31C432B418.
Copy files 1-2-3 (renamed) and HuRUpdater04.zip file into that folder.
(if you want you can keep the TWRP copying the .img file into that folder too).
Copy the folder into the SD.
Copy the OEMinfo file wherever you want into the SD.
Put the SD into the device...
Reboot into recovery and format DATA
(wipe>advanced wipe>tick data and tap format in the bottom right> type 'yes').
Reboot again recovery and wipe everything except SD
(wipe>advanced wipe>tick everything except sd).
Go in main menu, tap install, find and select OEMinfo file, let it flash...
When finished go in main menu and select REBOOT then Bootloader.
Once booted, connect the phone to your PC and
unlock again the bootloader. (quickly disconnect it from PC)
Device should automatically reboot into the recovery otherwise you can do
holding vol + and power button.
Now tap install, find your L31C432B418 folder,
select (only) HuRUpdater04.zip file and let it flash...
Your device should reboot into the system correctly,
if not (if passes over 15 mins) reboot into the e-recovery and
do a factory reset + wipe cache.
Done !!
Click to expand...
Click to collapse
thank you again you help me so mush i appreciate it :good:
kriminel87 said:
i did what you told me using this method https://forum.xda-developers.com/hu...ite-upgrade-rebrand-tools-pc-t3778839,ulocked boot loader installed TWRP recovery than used oem info for L31C432 and i download last full ota firmwire for it !!worked fine
thank you for guiding me!! i appreciate your help :victory::victory::good:
Click to expand...
Click to collapse
kriminel87 said:
thank you again you help me so mush i appreciate it :good:
Click to expand...
Click to collapse
Dude, my satisfaction is that everything went well ..
Thank you so much for all your feedback.
Cheers :highfive: