Database Users

Galaxy s4 gt-i9506 stuck on samsung logo set warrant bit kernel

Hey everyone, sorry my English is not good
i have galaxy s4 gt-i9506 and this morning when i woke up my phone was stuck on samsung logo.
i tried to boot to recovery then wiped all then reboot i got stuck on logo again
i flashed twrp with odin and rooted it from twrp recovery then reboot again stuck on logo and on the left top said set warrant bit : kernel.
and tries so much time to flash a stock firmware 4.4.2 and 5.0.1 with odin but it fail and i get error (secure check fail : rpm ) or (secure check fail : aboot)
could anyone help me with this situation.

sandro10 said:
Hey everyone, sorry my English is not good
i have galaxy s4 gt-i9506 and this morning when i woke up my phone was stuck on samsung logo.
i tried to boot to recovery then wiped all then reboot i got stuck on logo again
i flashed twrp with odin and rooted it from twrp recovery then reboot again stuck on logo and on the left top said set warrant bit : kernel.
and tries so much time to flash a stock firmware 4.4.2 and 5.0.1 with odin but it fail and i get error (secure check fail : rpm ) or (secure check fail : aboot)
could anyone help me with this situation.
Click to expand...
Click to collapse
which rom were you using ?

If it is failing to flash the aboot file, the ROM may not have been made for the phone. Also try using different USB cables and USB ports.
The model number is gt-19506 in download mode?

gosha98_ said:
which rom were you using ?
Click to expand...
Click to collapse
i used stock firmware 4.4.2 and then 5.0.1

audit13 said:
If it is failing to flash the aboot file, the ROM may not have been made for the phone. Also try using different USB cables and USB ports.
The model number is gt-19506 in download mode?
Click to expand...
Click to collapse
this is my download mode screen:
odin mode
product name : gt-i9506
current binary : custom
system status : custom
knox warranty void : 0x1 (1)
qualcomm secureboot : enable
ap swrev : s1, t1, r1, a1, p1
secure download : enable
udc start
and i tried to change usb port and cable but didnt work.
can you put a download link for my model firmware ?

Stock Roms for 9506: http://www.sammobile.com/firmwares/database/GT-I9506/

sandro10 said:
i used stock firmware 4.4.2 and then 5.0.1
Click to expand...
Click to collapse
Not possibile. The stock firmware doesn't show the warning for using another kernel during boot. Where did you get the firmware ?
---------- Post added at 10:32 AM ---------- Previous post was at 10:29 AM ----------
sandro10 said:
this is my download mode screen:
odin mode
product name : gt-i9506
current binary : custom
system status : custom
knox warranty void : 0x1 (1)
qualcomm secureboot : enable
ap swrev : s1, t1, r1, a1, p1
secure download : enable
udc start
and i tried to change usb port and cable but didnt work.
can you put a download link for my model firmware ?
Click to expand...
Click to collapse
Simply download your firmware from here: http://www.sammobile.com/firmwares/database/GT-I9506/ as audit13 suggest to you.
Region of firmware isn't important. But check the md5 after downloading to verify it isn't corrupted.

gosha98_ said:
Not possibile. The stock firmware doesn't show the warning for using another kernel during boot. Where did you get the firmware ?
---------- Post added at 10:32 AM ---------- Previous post was at 10:29 AM ----------
Simply download your firmware from here: http://www.sammobile.com/firmwares/database/GT-I9506/ as audit13 suggest to you.
Region of firmware isn't important. But check the md5 after downloading to verify it isn't corrupted.
Click to expand...
Click to collapse
i downloaded from that link and flashed with odin3 3.10.7 and the screen turned blue while odin at system then i disconnected it and odin said failed. I booted to download mode and reflashed it with the same firmware it failed and say (secure check fail : sbl1), now what would i do?

audit13 said:
Stock Roms for 9506: http://www.sammobile.com/firmwares/database/GT-I9506/
Click to expand...
Click to collapse
i downloaded from that link and flashed with odin3 3.10.7 and the screen turned blue while odin at system then i disconnected it and odin said failed. I booted to download mode and reflashed it with the same firmware it failed and say (secure check fail : sbl1), now what would i do? do you know what is the error ?

Did you use the original Samsung USB cable? I have found that the s4 is very picky about the USB cable when flashing with Odin.

sandro10 said:
i downloaded from that link and flashed with odin3 3.10.7 and the screen turned blue while odin at system then i disconnected it and odin said failed. I booted to download mode and reflashed it with the same firmware it failed and say (secure check fail : sbl1), now what would i do? do you know what is the error ?
Click to expand...
Click to collapse
As an user suggest to you, use a Samsung USB cable or try with another one. Maybe try to change also the USB port. Let us know
---------- Post added at 08:43 AM ---------- Previous post was at 08:42 AM ----------
sandro10 said:
i downloaded from that link and flashed with odin3 3.10.7 and the screen turned blue while odin at system then i disconnected it and odin said failed. I booted to download mode and reflashed it with the same firmware it failed and say (secure check fail : sbl1), now what would i do? do you know what is the error ?
Click to expand...
Click to collapse
Try another USB cable or another USB port. Let us know.

Need help!!! I believe I soft-bricked my Galaxy s8 SM-G950U

Hi recently I believe I soft-bricked my Galaxy S8 SM-G950U I was having trouble getting service on it, It would only work on like major roads so I knew something was wrong with it so I tried to get the device fully updated and everything by going in the setting menu in Android and doing it from there It still was doing the same issues. So I went about restoring it with OEM firmware with Odin, everything worked when I restarted it, it was running more smoothly and everything. So since I achieved doing that I was like might as well root it so I installed firmware in Odin then everything messed up I couldn't get into my boot-loader anymore. So I reflashed the stock files that originally worked at first and I was having the same issue. In the bootloader it's on a blue screen I see no command for a second and then it goes to installing updates and the screen keeps on flashing. I believe it's because I reflashed a firmware that had a loader bootloader I believe it was the v2 bootloader. I need the v3 bootloader for ATT galaxy I can't find it on any site preferably all the Odin files needed. Please any expert let me know if you experience this thanks!
DOWNLOAD MODE
CARRIER : ATT
RPMB fuse blown
RPMB PROVISIONED
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS : OFFICIAL
FRP LOCK : ON
WARRANTY VOID : 0x0
QUALCOMM SECUREBOOT : ENABLED
RP SWREV : B5(2,1,1,1,1) K4 S5
SECURE DONLOAD : ENABLED
DID : 205EA46632FD

FRP G935W8 Android Oreo 8.0 - Need some help over here.

Hello i need some help with unlocking my Phone which is Canadian Galaxy S7 Edge G935W8.
I did manage to install factory binary on this device, then I did factory reset from settings which should have remove the FRP Lock like in this video on youtube titled "Bypass Samsung S7 Edge SM-G935w8 Android 8 .Remove Google Account Bypass FRP.Without box" from 5th August 2018.
Then I installed the newest Android 8.0 by download mode (odin) but the phone still says FRP Lock : ON and I cannot pass the setup guide. The full name of the firmware version is G935W8VLS4CRH1. I also tried to downgrade the firmware but when i try odin fails at sboot.bin file and on the phone screen there is an information "SW rev check fail (bootloader) device 4 binary 3". After that I can just normally restart the phone by the buttons and it works normally. Is here someone who knows how to bypass the FRP Lock on this G935W8 Model ? I appreciate any kind of help.
Best regards.

G935W8VLS4CRH1 bootloader downgrade lock
twrp pass

Can you explain what I need to do ?

Flash stock rom G935W8VLS4CRH1 only
boot stock
menu developer tick 2 case on
boot bootloader flash twrp mode ap
magisk
---------- Post added at 03:58 AM ---------- Previous post was at 03:48 AM ----------
FRP Lock : ON=locked rom flash rom custom
In Settings, go to About phone > Software information
Tap on Build number 7 times to activate Developer options
Back out. In Settings, go to the newly added Developer options
Untick Auto update system
OEM unlock option should be available in the Developer options now
https://www.xda-developers.com/fix-...y-s9-samsung-galaxy-s8-samsung-galaxy-note-8/
reboot bootloader Lock : Off

I have same problem Samsung S7 Edge G935W8 with G935W8VLS4CRH1 firmware cannot make FRP unlock. Who can help me?

[HELP]Samsung Galaxy S8+ (Only official released binaries are allowed to be flashed)

Hello i have bootloap on my Samsung Galaxy S8 Plus ( SM-G955F).
1) I succesfully rooted phone by this vid. www,youtube,com/watch?v=XNznlTJJesc(just replace , after www and after youtube)
2) In App Magidisk i download Busybox and i have restarted phone.
3) Phone starts by ,,Samsung Galaxy S8 Plus" but in left corner is ,,Only official released binaries are allowed to be flashed".
Please, please you all, help me with this
I will love you!
Thank you a lot for any response.
Sorry for my bad english.

UPDATE
Update
odin mode
download speed: Fast
product name : Sm-g955f
current binary : Custom
system status : Custom
amm status : Prenormal
fap lock : Off
oem lock : Off
secure download : Enabled
..
..
Sw rev. Check fail (bootloader) device: 4, binary 1

moullcz said:
Update
odin mode
download speed: Fast
product name : Sm-g955f
current binary : Custom
system status : Custom
amm status : Prenormal
fap lock : Off
oem lock : Off
secure download : Enabled
..
..
Sw rev. Check fail (bootloader) device: 4, binary 1
Click to expand...
Click to collapse
1. Sw rev check fail - you are try to flash older firmware than what is on your phone. You will need to find firmware with bootloader 4 or higher ( 5th number from right of firmware name.
2. Official binary error is due to your rmm state being in pre-normal. This guide maybe of some help to you.
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
3. If you want to downgrade you will need firmware with the same bootloader version as what is on your phone.

Fixed by new ap & bt
spawnlives said:
1. Sw rev check fail - you are try to flash older firmware than what is on your phone. You will need to find firmware with bootloader 4 or higher ( 5th number from right of firmware name.
2. Official binary error is due to your rmm state being in pre-normal. This guide maybe of some help to you.
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
3. If you want to downgrade you will need firmware with the same bootloader version as what is on your phone.
Click to expand...
Click to collapse
I downladed new OS from sammobile and installed by odin.
Fixed. Thank you!

I need help with S7 edge custom binary blocked by FRP lock

I have been trying to install a new firmware using odin3. It doesn't work and it keeps showing "SW REV. CHECK FAIL(BOUTLORDER) DEVICE: 8. BINARY:1
My phone model is SM-G935F

My suddenly enter custom binary frp lock mode
My Samsung S7 edge model is SM-G935F. My AP SWREV shows B:8 K:6 S:7. Please, where can I download the correct firmware file that will be compatible with my phone binary?

Ksam1 said:
My suddenly enter custom binary frp lock mode
My Samsung S7 edge model is SM-G935F. My AP SWREV shows B:8 K:6 S:7. Please, where can I download the correct firmware file that will be compatible with my phone binary?
Click to expand...
Click to collapse
Hello There!
You can download your Firmware here (https://galaxyfirmware.com/model/SM-G935F/)
while finding a firmware, you will see something like this G935FXXS8ETC1, the 9th digit is the Bootloader Version or BINARY. since your binary is 8 you should find a firmware with the same Binary. I think you can choose any region right there as long as its open-line (choosing a different region from yours might end up a slow device).
Since your BINARY IS 8, you can only download a Android 8 Firmware for your S7 Edge.
Goodluck!