Hey everyone, sorry my English is not good
i have galaxy s4 gt-i9506 and this morning when i woke up my phone was stuck on samsung logo.
i tried to boot to recovery then wiped all then reboot i got stuck on logo again
i flashed twrp with odin and rooted it from twrp recovery then reboot again stuck on logo and on the left top said set warrant bit : kernel.
and tries so much time to flash a stock firmware 4.4.2 and 5.0.1 with odin but it fail and i get error (secure check fail : rpm ) or (secure check fail : aboot)
could anyone help me with this situation.
sandro10 said:
Hey everyone, sorry my English is not good
i have galaxy s4 gt-i9506 and this morning when i woke up my phone was stuck on samsung logo.
i tried to boot to recovery then wiped all then reboot i got stuck on logo again
i flashed twrp with odin and rooted it from twrp recovery then reboot again stuck on logo and on the left top said set warrant bit : kernel.
and tries so much time to flash a stock firmware 4.4.2 and 5.0.1 with odin but it fail and i get error (secure check fail : rpm ) or (secure check fail : aboot)
could anyone help me with this situation.
Click to expand...
Click to collapse
which rom were you using ?
If it is failing to flash the aboot file, the ROM may not have been made for the phone. Also try using different USB cables and USB ports.
The model number is gt-19506 in download mode?
gosha98_ said:
which rom were you using ?
Click to expand...
Click to collapse
i used stock firmware 4.4.2 and then 5.0.1
audit13 said:
If it is failing to flash the aboot file, the ROM may not have been made for the phone. Also try using different USB cables and USB ports.
The model number is gt-19506 in download mode?
Click to expand...
Click to collapse
this is my download mode screen:
odin mode
product name : gt-i9506
current binary : custom
system status : custom
knox warranty void : 0x1 (1)
qualcomm secureboot : enable
ap swrev : s1, t1, r1, a1, p1
secure download : enable
udc start
and i tried to change usb port and cable but didnt work.
can you put a download link for my model firmware ?
Stock Roms for 9506: http://www.sammobile.com/firmwares/database/GT-I9506/
sandro10 said:
i used stock firmware 4.4.2 and then 5.0.1
Click to expand...
Click to collapse
Not possibile. The stock firmware doesn't show the warning for using another kernel during boot. Where did you get the firmware ?
---------- Post added at 10:32 AM ---------- Previous post was at 10:29 AM ----------
sandro10 said:
this is my download mode screen:
odin mode
product name : gt-i9506
current binary : custom
system status : custom
knox warranty void : 0x1 (1)
qualcomm secureboot : enable
ap swrev : s1, t1, r1, a1, p1
secure download : enable
udc start
and i tried to change usb port and cable but didnt work.
can you put a download link for my model firmware ?
Click to expand...
Click to collapse
Simply download your firmware from here: http://www.sammobile.com/firmwares/database/GT-I9506/ as audit13 suggest to you.
Region of firmware isn't important. But check the md5 after downloading to verify it isn't corrupted.
gosha98_ said:
Not possibile. The stock firmware doesn't show the warning for using another kernel during boot. Where did you get the firmware ?
---------- Post added at 10:32 AM ---------- Previous post was at 10:29 AM ----------
Simply download your firmware from here: http://www.sammobile.com/firmwares/database/GT-I9506/ as audit13 suggest to you.
Region of firmware isn't important. But check the md5 after downloading to verify it isn't corrupted.
Click to expand...
Click to collapse
i downloaded from that link and flashed with odin3 3.10.7 and the screen turned blue while odin at system then i disconnected it and odin said failed. I booted to download mode and reflashed it with the same firmware it failed and say (secure check fail : sbl1), now what would i do?
audit13 said:
Stock Roms for 9506: http://www.sammobile.com/firmwares/database/GT-I9506/
Click to expand...
Click to collapse
i downloaded from that link and flashed with odin3 3.10.7 and the screen turned blue while odin at system then i disconnected it and odin said failed. I booted to download mode and reflashed it with the same firmware it failed and say (secure check fail : sbl1), now what would i do? do you know what is the error ?
Did you use the original Samsung USB cable? I have found that the s4 is very picky about the USB cable when flashing with Odin.
sandro10 said:
i downloaded from that link and flashed with odin3 3.10.7 and the screen turned blue while odin at system then i disconnected it and odin said failed. I booted to download mode and reflashed it with the same firmware it failed and say (secure check fail : sbl1), now what would i do? do you know what is the error ?
Click to expand...
Click to collapse
As an user suggest to you, use a Samsung USB cable or try with another one. Maybe try to change also the USB port. Let us know
---------- Post added at 08:43 AM ---------- Previous post was at 08:42 AM ----------
sandro10 said:
i downloaded from that link and flashed with odin3 3.10.7 and the screen turned blue while odin at system then i disconnected it and odin said failed. I booted to download mode and reflashed it with the same firmware it failed and say (secure check fail : sbl1), now what would i do? do you know what is the error ?
Click to expand...
Click to collapse
Try another USB cable or another USB port. Let us know.
Related
Hi guys. I'm seriously new with this. My brother's phone was having a problem with WA's update at first. So, I thought that we need to update the OS. So, we did and we're stuck with the screen showing 'Installing system update>95%>Error!' then this 'Recovery booting' repeatedly. Even right now and we can't even access it. Please help.
silver.eth said:
Hi guys. I'm seriously new with this. My brother's phone was having a problem with WA's update at first. So, I thought that we need to update the OS. So, we did and we're stuck with the screen showing 'Installing system update>95%>Error!' then this 'Recovery booting' repeatedly. Even right now and we can't even access it. Please help.
Click to expand...
Click to collapse
Hi
Can you switch off your phone by removing the battery and turn it on to download mode? (Press Vol down+home+power)
Maybe you can install the firmware update by odin
Yuen.Jason22 said:
Hi
Can you switch off your phone by removing the battery and turn it on to download mode? (Press Vol down+home+power)
Maybe you can install the firmware update by odin
Click to expand...
Click to collapse
Or try to download fresh firmware with the help of computer with stock kernel
Sent from my SM-G7102 using XDA Free mobile app
you can download official firmware at sammobile.. choose your country and download, flash with odin
Samsung Grand 2 SM-G7102software update installing error
ravindrastpt said:
Or try to download fresh firmware with the help of computer with stock kernel
Sent from my SM-G7102 using XDA Free mobile app
Click to expand...
Click to collapse
Please Help Me
Same issue with me...
Dear Tech's,
Unable to attach photos.
youtu.be/cUOViT5W7fg
This phone was given with issue from my friend. Is it fixable ? ( I really don't know what version of rom flashed before.)
When power on - Getting "recovery booting..." in blue color on top left after that next screen is "effacement en cours..."
after that no luck same screens when ever i try to power on.
tried many things, no luck.
Tried the below guidance too.
Samsung Sm-G7102 Soft Unbrick Tested Firmware + Downgrade From 4.4.2 Guide
Note:This file Only fix Bootloop issues ,Always Booting in recovery mode, after update to 4.4.2 hang Logo Only recovery mode.
Firmware Flashing Method:
* Put Mobile in Download Mode By Holding Vol dwn + Home + Pwr
* Cnnt vit pc using Usb
* Run Odin
* Select File in PDA
* Uncheck Auto Boot in Odin (Important This Step )
* Click Start
* After Flash complete Disconnect yur mobile Remove battery Wait for 20
Insert Battery Pwr ON yur Mobile
* If downgraded From 4.4.2 Hard rest it Mobile should Boot
* After flash Hard reset it if not Booted
Note:Tested on 2 Devices Worked Fine nd IMEI also fine
Firmware Download From Here Android 4.3
G7102ZTUANG2_ZZTANG2_BRI_Taiwan_4.3.zip [Credit Tsar3000]
Odin Flasher
no luck... still the same.
Kindly help to unbrick
---------- Post added at 11:21 PM ---------- Previous post was at 11:21 PM ----------
Odin mode
product name: Sm-g7102
current binary: Samsung official
system status: Official
qualcomm secure boot: Enable (csb)
Rp swrev: S2, t2, r2, a2, p2 udc start
I am able to flash roms ... but still no booting only possible to go download mode. Tried flashing twrp aswell no luck.
Good day!
I have the Model Samsung Galaxy Prime (SM-G531F). I rooted it and it was successfully done. But I have found out a problem so I decided to re flash it it the original stock rom. I have tried it using Odin. but then when I start, it always shows fail and now. My phone said "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I cant really flash it using Odin and can't also fix using Kies. Can someone help me please? Thank you very much in advance.
Did you made a backup for before flashing??
Download another compatible frimware from sammobile.com
Envoyé de mon SM-G531F en utilisant Tapatalk
Pls help me
My mobile is samsung Sm-G531y model
My mobile phone can't switch on, but when I connect USB charger Automatically comes odin mode like this below?
No image: warningmessage.jpg
No image: download_image.jpg
Odin mode (multi core download)
Product name :Sm-G531y
Current binary:samsung official
System status :custom
FRB lock : Off
Knox warrenty void:0x0
Secure download:enable
RB swrev: s0 L0 M0
soundarmelur said:
My mobile is samsung Sm-G531y model
My mobile phone can't switch on, but when I connect USB charger Automatically comes odin mode like this below?
No image: warningmessage.jpg
No image: download_image.jpg
Odin mode (multi core download)
Product name :Sm-G531y
Current binary:samsung official
System status :custom
FRB lock : Off
Knox warrenty void:0x0
Secure download:enable
RB swrev: s0 L0 M0
Click to expand...
Click to collapse
Can you get into download mode? Home + Volume Down + Power.
If yes reflash your firmware with Odin. If not, post here with any errors that have shown up and I'll help with what I can
Thank you for your reply
Maybe my is already in (odin mode)
But tried vol+home+power buttons not response in display
But only when connect USB charger it's automatically display that odin download mode
And
I tried to flash odin mode but it's faild
soundarmelur said:
Thank you for your reply
Maybe my is already in (odin mode)
But tried vol+home+power buttons not response in display
But only when connect USB charger it's automatically display that odin download mode
And
I tried to flash odin mode but it's faild
Click to expand...
Click to collapse
This will sound counter intuitive, but try removing the battery and then attaching it to your computer, I've had varied success with this.
That's all I can think of, if Odin and keis can't connect, maybe you could try a jtag at a technician
My mobile is samsung Sm-G531y model
My mobile phone can't switch on, but when I connect USB charger Automatically shows this message only
No image: warningmessage.jpg
No image: download_image.jpg
Odin mode (multi core download)
Product name :Sm-G531y
Current binary:samsung official
System status :custom
FRB lock : Off
Knox warrenty void:0x0
Secure download:enable
RB swrev: s0 L0 M0
no power+volume+home button works
aman5161 said:
My mobile is samsung Sm-G531y model
My mobile phone can't switch on, but when I connect USB charger Automatically shows this message only
No image: warningmessage.jpg
No image: download_image.jpg
Odin mode (multi core download)
Product name :Sm-G531y
Current binary:samsung official
System status :custom
FRB lock : Off
Knox warrenty void:0x0
Secure download:enable
RB swrev: s0 L0 M0
no power+volume+home button works
Click to expand...
Click to collapse
It sounds to me that your bootloader is broken:
No image: warningmessage.jpg
No image: download_image.jpg
Did you really apply a Stock ROM for SM-G531F ?
Cause your bootloader says that: Product name :Sm-G531y
Hi there guys,
I have a Note 3 N9005, and I am from Romania. My phone had the ORO Firmware (I think)but it was not SIM locked, or something like that, and it had Lollipop, the latest OTA version.
I've tried to install TWRP with Odin, on Windows (I have an MacBook, but I have installed Windows 7 x64 on VMware Fusion 8PRO).. but it gave me an error in.. and since then, when I restart the phone, it will say this : "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
I've tried several versions of Odin, like : 3.09 ; 3.07 and 1.85 but I have the same error.
I've also tried to install the latest firmware (N9005XXUGBOB6_N9005OXXGBOB4_ROM) , but I receive the same error, which can be seen in the printscreen.
This is what it says on the Download Mode :
ODIN MODE
Product name: SM-N9005
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: OFF
Knox Warranty Void: 0x0
Qualcomm SecureBoot: Enable (CSB)
RP SWREV: S2, T2, R2, A3, P3
Secure Download: Enable
UDC Start
---------------------------------------------------------
What can I do?
Thanks in advance!
I would try from a real Windows OS .
JJEgan said:
I would try from a real Windows OS .
Click to expand...
Click to collapse
Thanks for ur reply.. but the problem is that I ain't got a real windows computer..
Later Edit : I remembered I've had an old hard disk with Windows 7 which I used it for playing GTA5 a year ago.. (I have a Hackintosh).. and I've plugged it in.. and here it worked Odin.. to flash TWRP.. but now if I restart the phone.. it will get stuck where it says "Samsung N9005" ..but I can enter TWRP recovery menu..
zuzuzuzu said:
Thanks for ur reply.. but the problem is that I ain't got a real windows computer..
Later Edit : I remembered I've had an old hard disk with Windows 7 which I used it for playing GTA5 a year ago.. (I have a Hackintosh).. and I've plugged it in.. and here it worked Odin.. to flash TWRP.. but now if I restart the phone.. it will get stuck where it says "Samsung N9005" ..but I can enter TWRP recovery menu..
Click to expand...
Click to collapse
Of course. Earlier you flashed the phone but it doesn't completed. Reflash stock firmware. Or flash custom rom with twrp.
Sent from my SM-N920C
i have n910c note 4,, suddenly the system crashed and i installed official firmwares 5.01 5.1.1 6,0,1 but all of them just stuck at samsung logo and i cant access recovery,, tried installing recoveries most of them gave the message (recovery is not seandroid)
except the cwm, this one after i install it didnt show any message but still cant access the recovery and stuck at the samsung logo
p.s ... download mode info:
current binary: samsung official
system status: official
reactivation lock: off
secure download: enabled
knox warranty void: 1
rp swerv: 2
amar_diyab said:
i have n910c note 4,, suddenly the system crashed and i installed official firmwares 5.01 5.1.1 6,0,1 but all of them just stuck at samsung logo and i cant access recovery,, tried installing recoveries most of them gave the message (recovery is not seandroid)
except the cwm, this one after i install it didnt show any message but still cant access the recovery and stuck at the samsung logo
p.s ... download mode info:
current binary: samsung official
system status: official
reactivation lock: off
secure download: enabled
knox warranty void: 1
rp swerv: 2
Click to expand...
Click to collapse
Try to find a Pit file for your device with the corresponding firmware and try to flash pit + the firmware and let us know
i tried the pit but still nothing changed
p.s the pit file i used is N910C_TRELTE_EUR_OPEN_SEA by sawgent
amar_diyab said:
i tried the pit but still nothing changed
p.s the pit file i used is N910C_TRELTE_EUR_OPEN_SEA by sawgent
Click to expand...
Click to collapse
Did you tried flashing PIT + Firmware ? (Bootloader,Modem, System and CSC)
KeTuRr74 said:
Did you tried flashing PIT + Firmware ? (Bootloader,Modem, System and CSC)
Click to expand...
Click to collapse
yes i tried flashing still nothing changed
Use any permissive kernel?
thetrangdam said:
Use any permissive kernel?
Click to expand...
Click to collapse
nah i didnt use any kernel
somebody can tell me step by step what to do? I'm stuck in a bootloop and i tried to install the stock firmware with odin but it keeps failing Odin says that after i started it, everything is ok and i get a "pass" in Odin but it just keeps rebooting i only can get into download mode, not into recovery mode And when the phone starts to boot, i just get this black screen with the samsung galaxy S5 on it and in the top corner in blue letters "recovery booting ..." and then it goes black and restart ...
Can anybody help me i'm kinda desperate
Hi, try with pit file check your pm´s
israelicky said:
Hi, try with pit file check your pm´s
Click to expand...
Click to collapse
Whatdo i do with the file? Flash it with odin and then? Do i flash a new rom after it?
i tried to flash it again and used that PIT file but still the same result any other suggestions? Or is my phone ready for the recycle bin? :crying:
Flash it whit the rom
Does it say G900F in download mode?
Odin mode
Product Name : SM-G900F
Current binary : Samsung official
System status : Custom
Reactivation lock (KK) : Off
Knox waranty void : 0x1 (2)
Qualcomm secureboot : Enable (CSB)
Ap survey : S1, T1, A1, A1, P1
Secure download : Enable
UDC start
Thats what it says ...
Sounds like something in DATA is corrupted, which ODIN does not wipe
So flashing ROMs with ODIN won't fix it, you need to wipe the phone
Almost the same thing was happening with another member the other day, using ODIN option "Nand erase all" while flashing the ROM to wipe the phone, and then using KIES3 to recover the firmware was their fix
After Nand erase all, the phone would only enter download mode, KIES3 fixed that with the firmware recovery process
http://www.samsung.com/uk/support/usefulsoftware/KIES/
--
Or you could try flashing TWRP with ODIN, and see if you can get into TWRP recovery first, factory reset from there
I tried to put TWRP on my S5 with odin but that didn't work ...
Now i just flashed the phone with a new rom and with "Nand erase all" ticked and then do a firmware upgrade with "Kies" but unfortunately that didn't worked either :crying:
any other suggestions?
In ODIN, uncheck "Auto reboot"
Flash TWRP
When it completes disconnect USB and remove battery to power off
Replace battery and immediately boot into recovery
Volume Up & Home & Power
ANd you need to add more details other than "It didn't work" or we can't help
Ok i did what you suggested and at first it starts up with this on the screen :
Recovery booting .... (in blue letters)
Set warranty bit: recovery (in yellow letters)
then it just reboots without this text on it but it just keeps rebooting ... i dont get to see any thing else but the samsung galaxy s5 powered by android screen ...
And what does KIES firmware recovery say?
With the kies program i get thesame result ... it just stucks in the bootloop ...
No, what does KIES say when you run the firmware recovery?
I'm going to leave you to it, can't help you when you just keep repeating the same thing "Doesn't work"
Im not home at the moment,i will give it another go when im at home and tell you what it sayw
Ok, i opened Kies and searched for that emergency recovery firmware that you talked about but i don't see a option to select my phone??
Here is a printscreen from kies and my phone connected i download mode ...
http://i1360.photobucket.com/albums/r643/Tom_Mutsaerts/Naamloos2_zpskzwqrxly.jpg
Ok, you may close this topic, i brought the s5 to a repairshop and they are gonna check what the could do ... possible even necessary to replace the touchscreen and lcd according to the salesmen :s