Good day!
I have the Model Samsung Galaxy Prime (SM-G531F). I rooted it and it was successfully done. But I have found out a problem so I decided to re flash it it the original stock rom. I have tried it using Odin. but then when I start, it always shows fail and now. My phone said "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I cant really flash it using Odin and can't also fix using Kies. Can someone help me please? Thank you very much in advance.
Did you made a backup for before flashing??
Download another compatible frimware from sammobile.com
Envoyé de mon SM-G531F en utilisant Tapatalk
Pls help me
My mobile is samsung Sm-G531y model
My mobile phone can't switch on, but when I connect USB charger Automatically comes odin mode like this below?
No image: warningmessage.jpg
No image: download_image.jpg
Odin mode (multi core download)
Product name :Sm-G531y
Current binary:samsung official
System status :custom
FRB lock : Off
Knox warrenty void:0x0
Secure download:enable
RB swrev: s0 L0 M0
soundarmelur said:
My mobile is samsung Sm-G531y model
My mobile phone can't switch on, but when I connect USB charger Automatically comes odin mode like this below?
No image: warningmessage.jpg
No image: download_image.jpg
Odin mode (multi core download)
Product name :Sm-G531y
Current binary:samsung official
System status :custom
FRB lock : Off
Knox warrenty void:0x0
Secure download:enable
RB swrev: s0 L0 M0
Click to expand...
Click to collapse
Can you get into download mode? Home + Volume Down + Power.
If yes reflash your firmware with Odin. If not, post here with any errors that have shown up and I'll help with what I can
Thank you for your reply
Maybe my is already in (odin mode)
But tried vol+home+power buttons not response in display
But only when connect USB charger it's automatically display that odin download mode
And
I tried to flash odin mode but it's faild
soundarmelur said:
Thank you for your reply
Maybe my is already in (odin mode)
But tried vol+home+power buttons not response in display
But only when connect USB charger it's automatically display that odin download mode
And
I tried to flash odin mode but it's faild
Click to expand...
Click to collapse
This will sound counter intuitive, but try removing the battery and then attaching it to your computer, I've had varied success with this.
That's all I can think of, if Odin and keis can't connect, maybe you could try a jtag at a technician
My mobile is samsung Sm-G531y model
My mobile phone can't switch on, but when I connect USB charger Automatically shows this message only
No image: warningmessage.jpg
No image: download_image.jpg
Odin mode (multi core download)
Product name :Sm-G531y
Current binary:samsung official
System status :custom
FRB lock : Off
Knox warrenty void:0x0
Secure download:enable
RB swrev: s0 L0 M0
no power+volume+home button works
aman5161 said:
My mobile is samsung Sm-G531y model
My mobile phone can't switch on, but when I connect USB charger Automatically shows this message only
No image: warningmessage.jpg
No image: download_image.jpg
Odin mode (multi core download)
Product name :Sm-G531y
Current binary:samsung official
System status :custom
FRB lock : Off
Knox warrenty void:0x0
Secure download:enable
RB swrev: s0 L0 M0
no power+volume+home button works
Click to expand...
Click to collapse
It sounds to me that your bootloader is broken:
No image: warningmessage.jpg
No image: download_image.jpg
Did you really apply a Stock ROM for SM-G531F ?
Cause your bootloader says that: Product name :Sm-G531y
Related
could not do normal boot.
ODIN MODE.
Product name: SM-N9006
Current Binary: Custom
Reactivitation lock(KK): OFF
KNOX KEANEL LOCK : 0X 0
KNOX WARRANTY VOID : 0 X1
QUALCOMM SECUREBOOT: ENABLE(CSB)
AP SWAEV: S2, T2, R2, A3, P2
WRITE PROTECTION : Enable
UBC START
Downloading....
Do not turn off target
- download KINGO to root it, and it show success
- download root checker shown not rooted
- then download odin ver 3.7 and tried to do that and failed
- then it came to recovery mode, I press wipe all data and then reboot
- then shown firmware upgrade, and use kies
- I use kies but cannot detect this phone
- then use odin ver 3.9 and now it became this
then i restart and battery take out , and for whole day.. no seem to load.
and
i tried using pressing VOL DOWN + HOME + POWER
it came to Chinese wording.. with WARNING
. (I TRANSLATE IN ENGLISH AS WRITTEN IN CHINESE)
custom , modify or downloading can cause great problem to the software function.
if required our technical support, required to pay.
if you insist want to download default system function, please
VOL UP , if not VOL DOWN to cancel.
VOL UP
: CONTINUE
VOL DOWN
: CANCEL ( RECOVERY)
anyone can help, i', reside in Singapore and this is a china NOTE 3,
and the version is 4.42 KIT KAT version.
MODEL : NOTE 3, SM-N9
PLEASE HELP, MY EMAIL ADDRESS: [email protected] really appreciate.. thank you
ODIN MODE ( Could not do normal boot) SM9006
could not do normal boot.
ODIN MODE.
Product name: SM-N9006
Current Binary: Custom
Reactivitation lock(KK): OFF
KNOX KEANEL LOCK : 0X 0
KNOX WARRANTY VOID : 0 X1
QUALCOMM SECUREBOOT: ENABLE(CSB)
AP SWAEV: S2, T2, R2, A3, P2
WRITE PROTECTION : Enable
UBC START
Downloading....
Do not turn off target
- download KINGO to root it, and it show success
- download root checker shown not rooted
- then download odin ver 3.7 and tried to do that and failed
- then it came to recovery mode, I press wipe all data and then reboot
- then shown firmware upgrade, and use kies
- I use kies but cannot detect this phone
- then use odin ver 3.9 and now it became this
then i restart and battery take out , and for whole day.. no seem to load.
and
i tried using pressing VOL DOWN + HOME + POWER
it came to Chinese wording.. with WARNING
. (I TRANSLATE IN ENGLISH AS WRITTEN IN CHINESE)
custom , modify or downloading can cause great problem to the software function.
if required our technical support, required to pay.
if you insist want to download default system function, please
VOL UP , if not VOL DOWN to cancel.
VOL UP
: CONTINUE
VOL DOWN
: CANCEL ( RECOVERY)
once I press UP , this came to ODIN MODE page without could not do normal boot.
but it cannot not loading. and struck at the page..
I tried to press again with VOL UP + HOME + POWER
it came to this page
Andriod. system recovery <3E>
KOT49.HN9006ZNUENH1
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
below written
#MANUAL MODE #
--Appling Multi-CSC...
Applied the CSC-code : CHN
Successfully applied multi-CSC.[?COLOR]
anyone can help, i reside in Singapore and this is a china NOTE 3,
and the version is 4.42 KIT KAT version.
MODEL : NOTE 3, SM-N9
PLEASE HELP, MY EMAIL ADDRESS: [email protected] really appreciate.. thank you
MODEL: NOTE 3 SM-N9006
CHINA NOTE 3
VERSION: KITKAT 4.4.2
and I tried download kies in Singapore, US and even China ..cannot detect,
whatever I tried, it automatically came to the odin mode cannot do normal reboot.
and in recovery mode I pressed VOL UP + HOME + POWER still go back to odin mode...
anyone can help me with it.
PLEASE HELP, MY EMAIL ADDRESS: [email protected] really appreciate.. thank you
[/QUOTE]
ciny said:
could not do normal boot.
ODIN MODE.
Product name: SM-N9006
Current Binary: Custom
Reactivitation lock(KK): OFF
KNOX KEANEL LOCK : 0X 0
KNOX WARRANTY VOID : 0 X1
QUALCOMM SECUREBOOT: ENABLE(CSB)
AP SWAEV: S2, T2, R2, A3, P2
WRITE PROTECTION : Enable
UBC START
Downloading....
Do not turn off target
- download KINGO to root it, and it show success
- download root checker shown not rooted
- then download odin ver 3.7 and tried to do that and failed
- then it came to recovery mode, I press wipe all data and then reboot
- then shown firmware upgrade, and use kies
- I use kies but cannot detect this phone
- then use odin ver 3.9 and now it became this
then i restart and battery take out , and for whole day.. no seem to load.
and
i tried using pressing VOL DOWN + HOME + POWER
it came to Chinese wording.. with WARNING
. (I TRANSLATE IN ENGLISH AS WRITTEN IN CHINESE)
custom , modify or downloading can cause great problem to the software function.
if required our technical support, required to pay.
if you insist want to download default system function, please
VOL UP , if not VOL DOWN to cancel.
VOL UP
: CONTINUE
VOL DOWN
: CANCEL ( RECOVERY)
anyone can help, i', reside in Singapore and this is a china NOTE 3,
and the version is 4.42 KIT KAT version.
MODEL : NOTE 3, SM-N9
PLEASE HELP, MY EMAIL ADDRESS: [email protected] really appreciate.. thank you
Click to expand...
Click to collapse
G'day
I had the exact same issue with my SM-G900I. With the suggestion from an XDA senior; Try flashing with stock firmware from samsmobile.com for your particular model with Odin.
Trying this suggestion as I respond to your predicament. Shall keep you posted on the outcome.
Peace. :what:
Sent from my PNDPP47GP using XDA Free mobile app
Hello everyone
my friend bring to me his galaxy grande prime
it want to start up showing this message on his phone screen :
No Image: warningmessage.jpg
No Image: download_image.jpg
ODIN MODE (MULTI CORE DOWNLOAD)
PRODUCT NAME: SM-G531F
CURRENT BINARY: Samsung offical
System Status: Custom
FAP LOCK :0FF
KNOX WARRANTY VOID :0x0
Secure Download:Enabled
AP SWREV:S0,L0, M0
P.S: I cannot get to download mode or by hard rest
ARE THERE ANY WAY TO SOLVE THIS ISSUE PLEASE AND WHAT IS THE NAME OF THAT KIND OF ERROR
I wanted to reset my rooted device after I had format it into boot it into recovery mode, but I had forgot to turn off the OEM unlock and now I can ONLY access download mode.
HELP!!!!!
Flash stock firmware.
Naked Snake 7575 said:
I wanted to reset my rooted device after I had format it into boot it into recovery mode, but I had forgot to turn off the OEM unlock and now I can ONLY access download mode.
HELP!!!!!
Click to expand...
Click to collapse
I have the a problem that I install other TWRP custom rom and now when I turn the phone gets stuck on a screen that says:
Odin mode (written in red letters)
Product Name: Smg360t1
Current binary: Custom
System status: Custom
Fap lock: off
Qualcomm secureboot: Enable (CSB)
rp swrev: s1, t1, h1, r1, a11, p1
Secure download: enable (written in blue letters).
But the android as it should (I guess) does not appear and can not find the way to fix it
I only have 2 days with the phone and then this . I am a newbie on this field so that may explain why I failed
Can somebody help me? I really would appreciate the help
https://samsung-firmware.org/download/GALAXY CORE PRIME/9q9f/TMB/G360T1UVU1AOFA/G360T1TMB1AOFA/
Download the file abobe extract the file.
Do the rest of things. Best of luck
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.
@MrBl4ckSh33p
It happened to me to, install samsung kies and restore the firmware
Sent from my Samsung SM-G361F using XDA Labs
Hi all,
Please bear with me, I'm in way over my head here and don't understand most of what I've done. I was experimenting when I probably shouldn't have been.
So, I installed DarkLord's Note 7 kernel and rom. I found it to be quite buggy and am now wanting to wipe my phone and install Phronesis-N9005-N7-v6.0.
Problem is, when trying to boot into TWRP, I'm met with the the following:
ODIN MODE
Product name: SM-N9005
Current binary: Custom
System status: Official
Reactivation lock(kk): Off
Knox Kernel lock: 0x0
Knox warranty void: 0x1
Qualcomm secureboot: Enable (csb)
Rp swrev: S2, T2, R2, A3, P3
Write protection: Enable
UDC start
Downloading...
Do not turn off target
I've had it on for hours and it didn't do anything.
I managed to reboot it and it ran as it did before, in Darklords rom.
I read I have to install the official firmware and install it via Odin but I can't find anything about my device. On the back of it, it says:
SM N9005
FCC ID - A3LSMN9005
SNN - N9005GSMH
When I enter it into sammobile, nothing comes up.
Have I got this wrong? Should I be looking for something else?
You are booting to download mode not recovery .
Boot to recovery TWRP
#N9005 model firmware are on sammobile etc.
https://forum.xda-developers.com/galaxy-note-3/general/samsung-galaxy-note-3-sticky-roll-t3237249
Booting into recovery via TWRP manager just results in the same Odin screen for me
As for the firmware - I'm not really sure which region I should pick out of those. I just thought this was an international model, but then I downloaded an app called Phone INFO and it tells me it's Vietnam. Could this be because of the rom already on there? It does also say it's a Note 7, so I'm assuming it's incorrect.
TWRP manager
DO NOT USE just boot to recovery via the vol up home and power buttons as normal .
Copy Phronesis to ext sd card and flash as per instructions .
You have N9005 Pick your area /network where you are .
Phone Info can only go by what's on your phone and you flashed DarkLord's Note 7 firmware .
Booting via manager was a last resort. I was trying the usual way and it also resulting in the same thing.
Boot to download/ Odin mode flash stock rom .
Thanks JJEgan, I figured out how to use Odin3 and Odin mode, then install Phronesis. All is good now
Hello,
I have a SAMSUNG GALAXY S6 EDGE+ which is not able to boot anymore and contains precious data which I desperately want to recover (images and text messages).
If I let the phone boot normally I got a blank screen (white)
If I press Volume Low + Home + Power the phone directly enter DOWNLOAD MODE,
with de following information on the upper left corner:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G928F
CA_ TYPE: CA_3
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FAP LOCK: OFF
Secure Download : Enabled
KNOX WARRANTY VOID: 0 (0x0000)
AP SWREV: B:5 K:0 S:1
On the middle of the screen I can read
Downloading...
Do not turn off target
I never unlocked the boot-loader and/or installed custom recovery on this phone
I tried to :
Unlock boot-loader with Heimdall (or odin), in order to install TWRP
Problem: the phone is not in developer mode, so Heimdall failed to unlock the boot-loader
Recover data using Fone Paw for Android (trial 30 days version)
My phone model (SM-G928F) is not listed in the phone model list
It doesn't look like Fone Paw is able to access the device if I choose another phone model
I didn't try to :
Re-install stock Samsung-OS using ODIN
I'm afraid this will erase the data on the phone
I would appreciate if someone with some experiences on the subject could give me some advices here, what are my options to recover the data ?
Thanks for your help,
Regards,