Database Users

Please help me - tab 4 bricked

At first, sorry for my english, i'm french...
Well, everything is in the title.
I am the owner of a Galaxy Tab4, WiFi, 16GB, SM-T530 model.
I wanted to root it, then install TWRP and a custom rom.
Via Odin, I install the TWRP recovery(2.8).
After I started the flash of a Omnirom. Everything went normally, but on reboot, I have the Samsung Galaxy Tab logo 4 well, but in the upper left corner marked,:
KERNEL IS NOT SEANDROID enforcing (in red)
Set Bit Warranty: kernel (yellow)
If I start in download mode, I have written:
ODIN MODE
PRODUCT NAME: SM-T530
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CBS)
SWREV RP: S1, T1, R1, A1, P1
UDC START
2 days ago, I traveled all the forums, downloaded everything I could find, flash all of things, makes "format data" wipe everything, etc .....
I can not go through Odin because it is no longer recognized.
Nothing works
It's awful, if someone can help me..........

Are you sure you're not able to get into download mode with pressing Volume Down + Home Button + Power Button? It should work if you press them until download mode appears.

Its for testing only. Havent read? But you should be able to go in download mode

Download stock rom, boot into download mode, flash stock Rom.

1019
Hi,
is there someone who can edit my post, I've solved my problem, and then want to put my thread in "solved".
I found a stock rom, then, with Odin, went threw every step.
my tab found a new life.
Thanks to all of you.

latriche said:
Hi,
is there someone who can edit my post, I've solved my problem, and then want to put my thread in "solved".
I found a stock rom, then, with Odin, went threw every step.
my tab found a new life.
Thanks to all of you.
Click to expand...
Click to collapse
Could you tell me exactly how you did it I have a galaxy tab 4 and its saying the same thing I used sammobile firmware but when I try to flash it fails after nand start

Rooted Galaxy S5 Custom Recovery Install Issues (SM-G900F)

Hello guys.
I have successfully rooted my Samsung Galaxy S5 SM-G900F. (Checked root using root checker, and SuperSU)
I want to install a custom ROM and a custom recovery.
I followed dozens of guides online (I have done this before) to install a custom recovery.
However without success.
(Using Windows 10)
I have the USB drivers, I have tried the battery pull out trick when it doesn't boot into recovery after odin flash. Nothing seams to work. Every time it just goes into the default samsung recovery no matter what I do.
I have tried several recovery images without success. (using a USB 2 cable as well)
I have also tried different Odin versions (3.09 and 3.10.7).
I have USB Debugging enabled.
Tried different combinations of everything and nothing worked for my phone.
In recovery this is my information in the top:
Code:
ODIN MODE
PRODUCT NAME: SM-G900F
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK(KK): OFF
KNOX WARRANTY VOID: 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1, T1, R1, A1, P1
UDC START
Does anyone have any idea what I can do about this?

When you say you tried the pull battery trick, how did you do it?
Did you uncheck the "Auto Reboot" option in ODIN first?
Did you allow the flash to complete, disconnect USB, and pull the battery before doing anything else?
Then try to boot directly into recovery instead of powering on normally?

*Detection* said:
When you say you tried the pull battery trick, how did you do it?
Did you uncheck the "Auto Reboot" option in ODIN first?
Did you allow the flash to complete, disconnect USB, and pull the battery before doing anything else?
Then try to boot directly into recovery instead of powering on normally?
Click to expand...
Click to collapse
Yes, I did exactly that and when I tried going into recovery after pulling the battery it would go into the default recovery

soit48 said:
Yes, I did exactly that and when I tried going into recovery after pulling the battery it would go into the default recovery
Click to expand...
Click to collapse
Make sure you're using TWRP 2.8.7.0 specifically that version

*Detection* said:
Make sure you're using TWRP 2.8.7.0 specifically that version
Click to expand...
Click to collapse
Am using exactly that version.
Odin 3.09
TWRP 2.8.7.0 klte

Always use the latest ODIN 3.10.7, and run as administrator (Right click > run as Administrator)
Leave TWRP as .TAR - don't unzip
If it still fails, try using this instead
https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager&hl=en
Requires busybox first
https://play.google.com/store/apps/details?id=stericson.busybox&hl=en

1. win 10 sux whn drivers are in question
2. When instaled drivers did you let windows 10 to obtain them over internet? Windows always tries to chek for drivers even after instaled vie exe file - click skip obtaining from win update
3. Did you used usb 2.0 port on your machine?
4. Did you checked alow mock location and debug on your phone?
5. On some sams phones i had to check unknown sources and uncheck verify aps via usb (why i dnt knw but i menaged to get root after)
6. I always put odin and recov file in root of partition ie c://odin or d://odin
Sent from my SM-G900F using Tapatalk

Needing help - Stuck in Odin

Hi all,
Please bear with me, I'm in way over my head here and don't understand most of what I've done. I was experimenting when I probably shouldn't have been.
So, I installed DarkLord's Note 7 kernel and rom. I found it to be quite buggy and am now wanting to wipe my phone and install Phronesis-N9005-N7-v6.0.
Problem is, when trying to boot into TWRP, I'm met with the the following:
ODIN MODE
Product name: SM-N9005
Current binary: Custom
System status: Official
Reactivation lock(kk): Off
Knox Kernel lock: 0x0
Knox warranty void: 0x1
Qualcomm secureboot: Enable (csb)
Rp swrev: S2, T2, R2, A3, P3
Write protection: Enable
UDC start
Downloading...
Do not turn off target
I've had it on for hours and it didn't do anything.
I managed to reboot it and it ran as it did before, in Darklords rom.
I read I have to install the official firmware and install it via Odin but I can't find anything about my device. On the back of it, it says:
SM N9005
FCC ID - A3LSMN9005
SNN - N9005GSMH
When I enter it into sammobile, nothing comes up.
Have I got this wrong? Should I be looking for something else?

You are booting to download mode not recovery .
Boot to recovery TWRP
#N9005 model firmware are on sammobile etc.
https://forum.xda-developers.com/galaxy-note-3/general/samsung-galaxy-note-3-sticky-roll-t3237249

Booting into recovery via TWRP manager just results in the same Odin screen for me
As for the firmware - I'm not really sure which region I should pick out of those. I just thought this was an international model, but then I downloaded an app called Phone INFO and it tells me it's Vietnam. Could this be because of the rom already on there? It does also say it's a Note 7, so I'm assuming it's incorrect.

TWRP manager
DO NOT USE just boot to recovery via the vol up home and power buttons as normal .
Copy Phronesis to ext sd card and flash as per instructions .
You have N9005 Pick your area /network where you are .
Phone Info can only go by what's on your phone and you flashed DarkLord's Note 7 firmware .

Booting via manager was a last resort. I was trying the usual way and it also resulting in the same thing.

Boot to download/ Odin mode flash stock rom .

Thanks JJEgan, I figured out how to use Odin3 and Odin mode, then install Phronesis. All is good now

Deleted Nand on Samsung GalaXY tab 4 sm-t337v

Sm-t337v band gone
Hi I too click the nand in odin and now I can't get it pass the Samsung galaxy tab icon.
I have gotten a put file and did that it passed tried to do a stock firmware it won't go passed the icon
It wont let me attach them here is what it says
Odin mode
Product name SM-T337V
Current binary Samsung official
System status official
Reactivation lock off
Qualcomm secure boot enable (csb)
Rp sr s1 t1 r1 a3 p1
Secure download enable
Udc start that's the safe mode I think
But I also can get in to recovery mode as well it also says mutil csc?
it says this
manual mode
applying muti-csc...
applied the csc-code; VZW
successfully applied muti-csc
I have wiped the cache
it states
android systems recovery 3e
LMY47X.T337VVRS3BPL1
VOL UP AND DOWN TO HIGHLIGHT
POWER BUTTON TO SELECT
I CAN REBOOT
apply update from adb or external storage or from cache
i can wipe data/factory reset which doesnt do a thing
i can wipe cache partition reboot to bootloader and power down.
SO someone on here has to know how i can fix this im so stupid i could kick myself
please email me at [email protected] I am in IT so I know some what to do but not alot
ty
tammy

download odin 3.13.1 and download official firmware T337VVRS3BPL1 5.1.1 and use AP slot and place tablet in download mode and flash.

Recover data from non booting S6 Edge+

Hello,
I have a SAMSUNG GALAXY S6 EDGE+ which is not able to boot anymore and contains precious data which I desperately want to recover (images and text messages).
If I let the phone boot normally I got a blank screen (white)
If I press Volume Low + Home + Power the phone directly enter DOWNLOAD MODE,
with de following information on the upper left corner:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G928F
CA_ TYPE: CA_3
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FAP LOCK: OFF
Secure Download : Enabled
KNOX WARRANTY VOID: 0 (0x0000)
AP SWREV: B:5 K:0 S:1
On the middle of the screen I can read
Downloading...
Do not turn off target
I never unlocked the boot-loader and/or installed custom recovery on this phone
I tried to :
Unlock boot-loader with Heimdall (or odin), in order to install TWRP
Problem: the phone is not in developer mode, so Heimdall failed to unlock the boot-loader
Recover data using Fone Paw for Android (trial 30 days version)
My phone model (SM-G928F) is not listed in the phone model list
It doesn't look like Fone Paw is able to access the device if I choose another phone model
I didn't try to :
Re-install stock Samsung-OS using ODIN
I'm afraid this will erase the data on the phone
I would appreciate if someone with some experiences on the subject could give me some advices here, what are my options to recover the data ?
Thanks for your help,
Regards,