Related
could not do normal boot.
ODIN MODE.
Product name: SM-N9006
Current Binary: Custom
Reactivitation lock(KK): OFF
KNOX KEANEL LOCK : 0X 0
KNOX WARRANTY VOID : 0 X1
QUALCOMM SECUREBOOT: ENABLE(CSB)
AP SWAEV: S2, T2, R2, A3, P2
WRITE PROTECTION : Enable
UBC START
Downloading....
Do not turn off target
- download KINGO to root it, and it show success
- download root checker shown not rooted
- then download odin ver 3.7 and tried to do that and failed
- then it came to recovery mode, I press wipe all data and then reboot
- then shown firmware upgrade, and use kies
- I use kies but cannot detect this phone
- then use odin ver 3.9 and now it became this
then i restart and battery take out , and for whole day.. no seem to load.
and
i tried using pressing VOL DOWN + HOME + POWER
it came to Chinese wording.. with WARNING
. (I TRANSLATE IN ENGLISH AS WRITTEN IN CHINESE)
custom , modify or downloading can cause great problem to the software function.
if required our technical support, required to pay.
if you insist want to download default system function, please
VOL UP , if not VOL DOWN to cancel.
VOL UP
: CONTINUE
VOL DOWN
: CANCEL ( RECOVERY)
anyone can help, i', reside in Singapore and this is a china NOTE 3,
and the version is 4.42 KIT KAT version.
MODEL : NOTE 3, SM-N9
PLEASE HELP, MY EMAIL ADDRESS: [email protected] really appreciate.. thank you
ODIN MODE ( Could not do normal boot) SM9006
could not do normal boot.
ODIN MODE.
Product name: SM-N9006
Current Binary: Custom
Reactivitation lock(KK): OFF
KNOX KEANEL LOCK : 0X 0
KNOX WARRANTY VOID : 0 X1
QUALCOMM SECUREBOOT: ENABLE(CSB)
AP SWAEV: S2, T2, R2, A3, P2
WRITE PROTECTION : Enable
UBC START
Downloading....
Do not turn off target
- download KINGO to root it, and it show success
- download root checker shown not rooted
- then download odin ver 3.7 and tried to do that and failed
- then it came to recovery mode, I press wipe all data and then reboot
- then shown firmware upgrade, and use kies
- I use kies but cannot detect this phone
- then use odin ver 3.9 and now it became this
then i restart and battery take out , and for whole day.. no seem to load.
and
i tried using pressing VOL DOWN + HOME + POWER
it came to Chinese wording.. with WARNING
. (I TRANSLATE IN ENGLISH AS WRITTEN IN CHINESE)
custom , modify or downloading can cause great problem to the software function.
if required our technical support, required to pay.
if you insist want to download default system function, please
VOL UP , if not VOL DOWN to cancel.
VOL UP
: CONTINUE
VOL DOWN
: CANCEL ( RECOVERY)
once I press UP , this came to ODIN MODE page without could not do normal boot.
but it cannot not loading. and struck at the page..
I tried to press again with VOL UP + HOME + POWER
it came to this page
Andriod. system recovery <3E>
KOT49.HN9006ZNUENH1
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
below written
#MANUAL MODE #
--Appling Multi-CSC...
Applied the CSC-code : CHN
Successfully applied multi-CSC.[?COLOR]
anyone can help, i reside in Singapore and this is a china NOTE 3,
and the version is 4.42 KIT KAT version.
MODEL : NOTE 3, SM-N9
PLEASE HELP, MY EMAIL ADDRESS: [email protected] really appreciate.. thank you
MODEL: NOTE 3 SM-N9006
CHINA NOTE 3
VERSION: KITKAT 4.4.2
and I tried download kies in Singapore, US and even China ..cannot detect,
whatever I tried, it automatically came to the odin mode cannot do normal reboot.
and in recovery mode I pressed VOL UP + HOME + POWER still go back to odin mode...
anyone can help me with it.
PLEASE HELP, MY EMAIL ADDRESS: [email protected] really appreciate.. thank you
[/QUOTE]
ciny said:
could not do normal boot.
ODIN MODE.
Product name: SM-N9006
Current Binary: Custom
Reactivitation lock(KK): OFF
KNOX KEANEL LOCK : 0X 0
KNOX WARRANTY VOID : 0 X1
QUALCOMM SECUREBOOT: ENABLE(CSB)
AP SWAEV: S2, T2, R2, A3, P2
WRITE PROTECTION : Enable
UBC START
Downloading....
Do not turn off target
- download KINGO to root it, and it show success
- download root checker shown not rooted
- then download odin ver 3.7 and tried to do that and failed
- then it came to recovery mode, I press wipe all data and then reboot
- then shown firmware upgrade, and use kies
- I use kies but cannot detect this phone
- then use odin ver 3.9 and now it became this
then i restart and battery take out , and for whole day.. no seem to load.
and
i tried using pressing VOL DOWN + HOME + POWER
it came to Chinese wording.. with WARNING
. (I TRANSLATE IN ENGLISH AS WRITTEN IN CHINESE)
custom , modify or downloading can cause great problem to the software function.
if required our technical support, required to pay.
if you insist want to download default system function, please
VOL UP , if not VOL DOWN to cancel.
VOL UP
: CONTINUE
VOL DOWN
: CANCEL ( RECOVERY)
anyone can help, i', reside in Singapore and this is a china NOTE 3,
and the version is 4.42 KIT KAT version.
MODEL : NOTE 3, SM-N9
PLEASE HELP, MY EMAIL ADDRESS: [email protected] really appreciate.. thank you
Click to expand...
Click to collapse
G'day
I had the exact same issue with my SM-G900I. With the suggestion from an XDA senior; Try flashing with stock firmware from samsmobile.com for your particular model with Odin.
Trying this suggestion as I respond to your predicament. Shall keep you posted on the outcome.
Peace. :what:
Sent from my PNDPP47GP using XDA Free mobile app
I wanted to reset my rooted device after I had format it into boot it into recovery mode, but I had forgot to turn off the OEM unlock and now I can ONLY access download mode.
HELP!!!!!
Flash stock firmware.
Naked Snake 7575 said:
I wanted to reset my rooted device after I had format it into boot it into recovery mode, but I had forgot to turn off the OEM unlock and now I can ONLY access download mode.
HELP!!!!!
Click to expand...
Click to collapse
I have the a problem that I install other TWRP custom rom and now when I turn the phone gets stuck on a screen that says:
Odin mode (written in red letters)
Product Name: Smg360t1
Current binary: Custom
System status: Custom
Fap lock: off
Qualcomm secureboot: Enable (CSB)
rp swrev: s1, t1, h1, r1, a11, p1
Secure download: enable (written in blue letters).
But the android as it should (I guess) does not appear and can not find the way to fix it
I only have 2 days with the phone and then this . I am a newbie on this field so that may explain why I failed
Can somebody help me? I really would appreciate the help
https://samsung-firmware.org/download/GALAXY CORE PRIME/9q9f/TMB/G360T1UVU1AOFA/G360T1TMB1AOFA/
Download the file abobe extract the file.
Do the rest of things. Best of luck
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.
@MrBl4ckSh33p
It happened to me to, install samsung kies and restore the firmware
Sent from my Samsung SM-G361F using XDA Labs
somebody can tell me step by step what to do? I'm stuck in a bootloop and i tried to install the stock firmware with odin but it keeps failing Odin says that after i started it, everything is ok and i get a "pass" in Odin but it just keeps rebooting i only can get into download mode, not into recovery mode And when the phone starts to boot, i just get this black screen with the samsung galaxy S5 on it and in the top corner in blue letters "recovery booting ..." and then it goes black and restart ...
Can anybody help me i'm kinda desperate
Hi, try with pit file check your pm´s
israelicky said:
Hi, try with pit file check your pm´s
Click to expand...
Click to collapse
Whatdo i do with the file? Flash it with odin and then? Do i flash a new rom after it?
i tried to flash it again and used that PIT file but still the same result any other suggestions? Or is my phone ready for the recycle bin? :crying:
Flash it whit the rom
Does it say G900F in download mode?
Odin mode
Product Name : SM-G900F
Current binary : Samsung official
System status : Custom
Reactivation lock (KK) : Off
Knox waranty void : 0x1 (2)
Qualcomm secureboot : Enable (CSB)
Ap survey : S1, T1, A1, A1, P1
Secure download : Enable
UDC start
Thats what it says ...
Sounds like something in DATA is corrupted, which ODIN does not wipe
So flashing ROMs with ODIN won't fix it, you need to wipe the phone
Almost the same thing was happening with another member the other day, using ODIN option "Nand erase all" while flashing the ROM to wipe the phone, and then using KIES3 to recover the firmware was their fix
After Nand erase all, the phone would only enter download mode, KIES3 fixed that with the firmware recovery process
http://www.samsung.com/uk/support/usefulsoftware/KIES/
--
Or you could try flashing TWRP with ODIN, and see if you can get into TWRP recovery first, factory reset from there
I tried to put TWRP on my S5 with odin but that didn't work ...
Now i just flashed the phone with a new rom and with "Nand erase all" ticked and then do a firmware upgrade with "Kies" but unfortunately that didn't worked either :crying:
any other suggestions?
In ODIN, uncheck "Auto reboot"
Flash TWRP
When it completes disconnect USB and remove battery to power off
Replace battery and immediately boot into recovery
Volume Up & Home & Power
ANd you need to add more details other than "It didn't work" or we can't help
Ok i did what you suggested and at first it starts up with this on the screen :
Recovery booting .... (in blue letters)
Set warranty bit: recovery (in yellow letters)
then it just reboots without this text on it but it just keeps rebooting ... i dont get to see any thing else but the samsung galaxy s5 powered by android screen ...
And what does KIES firmware recovery say?
With the kies program i get thesame result ... it just stucks in the bootloop ...
No, what does KIES say when you run the firmware recovery?
I'm going to leave you to it, can't help you when you just keep repeating the same thing "Doesn't work"
Im not home at the moment,i will give it another go when im at home and tell you what it sayw
Ok, i opened Kies and searched for that emergency recovery firmware that you talked about but i don't see a option to select my phone??
Here is a printscreen from kies and my phone connected i download mode ...
http://i1360.photobucket.com/albums/r643/Tom_Mutsaerts/Naamloos2_zpskzwqrxly.jpg
Ok, you may close this topic, i brought the s5 to a repairshop and they are gonna check what the could do ... possible even necessary to replace the touchscreen and lcd according to the salesmen :s
Hi,
I realy need your help,
I have a S7 edge who is stuck at the samsung logo.
I have flashed some stock rom (all in 7.0) via odin 3.12 after a wipe factory but nothing. So i decided to try it with Kies and smartSwitch but still nothing.
I have access to recovery and download mode.
FRP lock: On
The phone is not rooted, and the usb debugging not enabled.
The phone print this in the download mode:
ODIN MODE
Download speed: FAST
Product-Name: SM-G935F
Current Binary: Samsung Official
System Status: Custom
FRP lock: ON
Secure Downlaod: Enabled
Warranty Void: 0(0x000)
RP SWREV: B:1 K:0 S:0
After the installation of the flashed rom in the download mode, the phone reboot with a blue screen, a progress bar but it stop to 32%, and then it is printed "erasing.." and the phone reboot and is still stuck.
I have re-tryed with Kies, now the phone is with a green screen with 2 white Gears : "android is starting" but it is still stuck (i let him all the night but nothing)
i don't know what to do
nonechap said:
Hi,
I realy need your help,
I have a S7 edge who is stuck at the samsung logo.
I have flashed some stock rom (all in 7.0) via odin 3.12 after a wipe factory but nothing. So i decided to try it with Kies and smartSwitch but still nothing.
I have access to recovery and download mode.
FRP lock: On
The phone is not rooted, and the usb debugging not enabled.
The phone print this in the download mode:
ODIN MODE
Download speed: FAST
Product-Name: SM-G935F
Current Binary: Samsung Official
System Status: Custom
FRP lock: ON
Secure Downlaod: Enabled
Warranty Void: 0(0x000)
RP SWREV: B:1 K:0 S:0
After the installation of the flashed rom in the download mode, the phone reboot with a blue screen, a progress bar but it stop to 32%, and then it is printed "erasing.." and the phone reboot and is still stuck.
I have re-tryed with Kies, now the phone is with a green screen with 2 white Gears : "android is starting" but it is still stuck (i let him all the night but nothing)
i don't know what to do
Click to expand...
Click to collapse
You have to use smart switch emergency recovery function to restore your phone. It is a stand alone function within smart switch.
All you need is your phone model and serial number.
Apparently you missed a step when preparing your phone for flashing.
Or you can continue to use Odin which when you plug the USB in will show that a connection is made even though the phone says it's not in download mode.
Cosmic Blue said:
You have to use smart switch emergency recovery function to restore your phone. It is a stand alone function within smart switch.
All you need is your phone model and serial number.
Apparently you missed a step when preparing your phone for flashing.
Click to expand...
Click to collapse
I did an emergency recovery with my phone model and serial, same with kies.
nonechap said:
I did an emergency recovery with my phone model and serial, same with kies.
Click to expand...
Click to collapse
If that did not work, it looks like the memory chip on the mother board is damaged. Take it in if it is still under warranty.
Cosmic Blue said:
If that did not work, it looks like the memory chip on the mother board is damaged. Take it in if it is still under warranty.
Click to expand...
Click to collapse
it is not under warranty anymore, should i replace the motherboard ?
@nonechap bro
upgrade you bootloader before flash nougat rom
bootloader is here
https://www.androidfilehost.com/?fid=529152257862714907
modem is here
https://www.androidfilehost.com/?fid=529152257862714909
open odin and boot your phone into download mode
[1]Connect phone and wait until you get a blue sign in Odin
[2]Place the desired BL file in the [BL] slot.
[3]Place the desired CP file in the [CP] slot.
[4] Go to the Options section and make sure Auto Reboot, Re-Partition and F. reset time are unmarked.
[5]Push [Start]
Once odin reports "Success..." message in the Message box, boot your phone into download mode again
then flash again 7.0 roms via odin
then boot in recovery and wipe data and cache
and reboot device
be patience first boot takes 15 minutes or more
if fail you cant boot your device untill system status changed to official due to knox restrictions or bootloader changed to latest
if not boot that means your bootloader not update by odin due to frp lock is on
if you are on marshmellow before flash 6.0.1 firmware to boot device
firmwares are here
https://www.sammobile.com/firmwares/database/SM-G935F/
i suggest if device boots unlock bootloader first to disable knox
hit thumbs up if i helped you
rony raj said:
@nonechap bro
upgrade you bootloader before flash nougat rom
bootloader is here
https://www.androidfilehost.com/?fid=529152257862714907
modem is here
https://www.androidfilehost.com/?fid=529152257862714909
open odin and boot your phone into download mode
[1]Connect phone and wait until you get a blue sign in Odin
[2]Place the desired BL file in the [BL] slot.
[3]Place the desired CP file in the [CP] slot.
[4] Go to the Options section and make sure Auto Reboot, Re-Partition and F. reset time are unmarked.
[5]Push [Start]
Once odin reports "Success..." message in the Message box, boot your phone into download mode again
then flash again 7.0 roms via odin
then boot in recovery and wipe data and cache
and reboot device
be patience first boot takes 15 minutes or more
if fail you cant boot your device untill system status changed to official due to knox restrictions or bootloader changed to latest
if not boot that means your bootloader not update by odin due to frp lock is on
if you are on marshmellow before flash 6.0.1 firmware to boot device
firmwares are here
https://www.sammobile.com/firmwares/database/SM-G935F/
i suggest if device boots unlock bootloader first to disable knox
hit thumbs up if i helped you
Click to expand...
Click to collapse
In this case, when i flash the rom, should i use the 4 files or only the AP file ?
nonechap said:
In this case, when i flash the rom, should i use the 4 files or only the AP file ?
Click to expand...
Click to collapse
use old odin
rony raj said:
use old odin
Click to expand...
Click to collapse
What version of odin should i use ?
And i have to use only the AP file or the 4 files of the 7.0 rom after the bootloader update? (AP BL CP CSC)
nonechap said:
What version of odin should i use ?
And i have to use only the AP file or the 4 files of the 7.0 rom after the bootloader update? (AP BL CP CSC)
Click to expand...
Click to collapse
odin v3.09 or 3.12
update bootloader and modem from given first post by me
rony raj said:
odin v3.09 or 3.12
update bootloader and modem from given first post by me
Click to expand...
Click to collapse
Yes i know but when i have updated the bootload with the 2 files you gave me, i have to reboot in download mod and flash the 7.0 rom, but i have download the rom and i have 4 files, so should i flash only the AP or the four files ?
nonechap said:
Yes i know but when i have updated the bootload with the 2 files you gave me, i have to reboot in download mod and flash the 7.0 rom, but i have download the rom and i have 4 files, so should i flash only the AP or the four files ?
Click to expand...
Click to collapse
tell me rom on your device before bootloop
6.0 or 7.0
rony raj said:
tell me rom on your device before bootloop
6.0 or 7.0
Click to expand...
Click to collapse
6.0.1
nonechap said:
6.0.1
Click to expand...
Click to collapse
then flash 6.0 firmware
download from here
https://www.sammobile.com/firmwares/database/SM-G935F/
rony raj said:
then flash 6.0 firmware
download from here
https://www.sammobile.com/firmwares/database/SM-G935F/
Click to expand...
Click to collapse
I tried but still nothing, i think i have to replace the motherboard ?
nonechap said:
I tried but still nothing, i think i have to replace the motherboard ?
Click to expand...
Click to collapse
try another chance
To do the S7 FRP OFF - Put phone in download mode
Once phone is in download mode.
Flash the files which i will provide.
You Only need to flash boot.tar via odin for respective models (example for s7 use G930 Qualcomm folder) for (s7 edge use G935 Qualcomm folder)
Once you flash the boot tar file. The phone will reboot and it will enable ADB. Run the Bat file which i will provide and it will remove the FRP lock
Once done put the phone in Downlaod mode and flash stock ROM.
The whole process takes less than 10 mins.
Same Idea for S7 Exynos phones... put phone in downlaod mode and then flash the file (G930F(ENGroot) for s7 models & (G935F_Root for s7 edge models). Once done phone will reboot. Then use this bat file (g935f.bat). Once this is executed locks will be removed and phone will go in download mode. Flash stock Boot.img and ALL DONE.
download
https://mega.nz/#!Tw0TAI6I!jCGuxGrwqCGEy3flcRqF9EpzbaTkby7SJ_slKRaXqRs
rony raj said:
try another chance
To do the S7 FRP OFF - Put phone in download mode
Once phone is in download mode.
Flash the files which i will provide.
You Only need to flash boot.tar via odin for respective models (example for s7 use G930 Qualcomm folder) for (s7 edge use G935 Qualcomm folder)
Once you flash the boot tar file. The phone will reboot and it will enable ADB. Run the Bat file which i will provide and it will remove the FRP lock
Once done put the phone in Downlaod mode and flash stock ROM.
The whole process takes less than 10 mins.
Same Idea for S7 Exynos phones... put phone in downlaod mode and then flash the file (G930F(ENGroot) for s7 models & (G935F_Root for s7 edge models). Once done phone will reboot. Then use this bat file (g935f.bat). Once this is executed locks will be removed and phone will go in download mode. Flash stock Boot.img and ALL DONE.
download
https://mega.nz/#!Tw0TAI6I!jCGuxGrwqCGEy3flcRqF9EpzbaTkby7SJ_slKRaXqRs
Click to expand...
Click to collapse
After flashing boot.tar, when i run the .bat, it says error: closed
EDIT: i have to enter into the recovery mod and select "adb update" in order to make my phone detected by my computer
Those files are for the S7. Do they work for the S7 Edge also?
Edit - I tried it and it fails in odin. My phone is bricked.
rony raj said:
@nonechap bro
upgrade you bootloader before flash nougat rom
bootloader is here
https://www.androidfilehost.com/?fid=529152257862714907
modem is here
https://www.androidfilehost.com/?fid=529152257862714909
open odin and boot your phone into download mode
[1]Connect phone and wait until you get a blue sign in Odin
[2]Place the desired BL file in the [BL] slot.
[3]Place the desired CP file in the [CP] slot.
[4] Go to the Options section and make sure Auto Reboot, Re-Partition and F. reset time are unmarked.
[5]Push [Start]
Once odin reports "Success..." message in the Message box, boot your phone into download mode again
then flash again 7.0 roms via odin
then boot in recovery and wipe data and cache
and reboot device
be patience first boot takes 15 minutes or more
if fail you cant boot your device untill system status changed to official due to knox restrictions or bootloader changed to latest
if not boot that means your bootloader not update by odin due to frp lock is on
if you are on marshmellow before flash 6.0.1 firmware to boot device
firmwares are here
https://www.sammobile.com/firmwares/database/SM-G935F/
i suggest if device boots unlock bootloader first to disable knox
hit thumbs up if i helped you
Click to expand...
Click to collapse
Works !!!
Sorry to revive an old thread but I think it might help people recover from a bootloop with a bit of addtional explanation than initially provided.
So I have an S7 Edge as a backup phone and hadn't used it for a while. Google FRP was activated. I tried to update to a newer firmware through Odin (can't OTA since it's from Tmo and i'm in Canada). Anyways for whatever reason it failed in the middle and I was stuck in a bootloop that wouldn't stop. I tried downgrading, I tried factory, I tried new versions, nothing would do, I'm assuming because of FRP.
So I followed Rony Raj's post https://forum.xda-developers.com/showpost.php?p=71906126&postcount=17 but kept getting stuck. The thing is once you flash the proper Boot.tar file, the phone will appear to still be in a bootloop. You will have to go with the screen (the phone) and the sound of the connection and disconnection from your computer. So basically just sync with the sounds and time it so you open the ''S7 & S7 Edge QUALCOMM.bat'' file at the exact time your phone reconnects and it'll work. I had to do it about 6-7 times before i got it right.
When that is done your phone will restart in download mode. When you do just flash the latest version of the firmware you get from AndroidFileHos*.com or Sammobil*.com. Make sure you select all 4 files in Odin (BL, AP, CP and SELECT CSC HOME for CSC - NOT CSC).
Once all that is done your phone will restart and everything should be fine, well that worked for me
Thanks a lot to @rony raj for putting together the files and the steps to save my G935
Hi, i am very new to the whole rooting process, so please forgive me of any ignorance.
i have a Samsung Tab E model is SM-T377P and it has Sprint service, my tablet got infected by a virus and its blocking me from doing a wipe data / factory reset.
so if i try to select the option wipe data / factory reset the virus gives me a message its not allowed and reboots the device, now i tried loading the firmware T377PVPU3CQI4_T377PSPT3CQI4_SPR\T377PVPU3CQI4_T377PSPT3CQI4_T377PVPU3CQI4_HOME.tar.md5 with Odin3 and it passed, but still got no luck to reset, so i tried with Nand Erase, but unfortunately this time i can no longer boot into android, it stays stuck at the sprint logo, i can still go to download mode, but i can no longer get this machine working, if i restart the tablet it stays stuck at the sprint logo.
another thing to note, i can also no longer see the device in my computer, only Odin3 is detecting it, even Samsung Kies is not detecting it anymore.
could anyone help me to get this recovered to a full factory reset?
here is some details of my screen in recovery mode.
samsung/gtesqltespr/gtesqltespr
7.1.1/NMF26X/T377PVPU3CQI4
user/release-keys
Use volume uo/down and power.
___________________________________________________
reboot system now (doesnt work, it gets stuck at the logo)
Reboot to bootloader
apply update from ADR
Apply update from SD card
Wipe data/factory reset (doesnt work, virus is blocking it)
Wipe cache partition
Mount /system
View recovery logs
Run graphics test
Power off
___________________________________________________
No Support SINGLE-SKU
Supported API: 3
E: ensure_path_unmounted failed to unmount /efs (Device or resource busy)
# MANUAL MODE v1.0.0#
-- Appling Multi-CSC...
Applied the CSC-code : SPR
Successfully applied multi-CSC
successfully verify for dmverity hash tree
E:failed to open /dev/block/bootdevice/by-name/misc: No such file or directory
****************************************************
here is my screen in download mode.
ODIN MODE
PRODUCT NAME: SM-T377P
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FAP LOCK: ON
WARRANTY VOID: 0X0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, H1, R1, A3, P1
SECURE DOWNLOAD : ENABLE
auto9999 said:
Hi, i am very new to the whole rooting process, so please forgive me of any ignorance.
i have a Samsung Tab E model is SM-T377P and it has Sprint service, my tablet got infected by a virus and its blocking me from doing a wipe data / factory reset.
so if i try to select the option wipe data / factory reset the virus gives me a message its not allowed and reboots the device, now i tried loading the firmware T377PVPU3CQI4_T377PSPT3CQI4_SPR\T377PVPU3CQI4_T377PSPT3CQI4_T377PVPU3CQI4_HOME.tar.md5 with Odin3 and it passed, but still got no luck to reset, so i tried with Nand Erase, but unfortunately this time i can no longer boot into android, it stays stuck at the sprint logo, i can still go to download mode, but i can no longer get this machine working, if i restart the tablet it stays stuck at the sprint logo.
another thing to note, i can also no longer see the device in my computer, only Odin3 is detecting it, even Samsung Kies is not detecting it anymore.
could anyone help me to get this recovered to a full factory reset?
here is some details of my screen in recovery mode.
samsung/gtesqltespr/gtesqltespr
7.1.1/NMF26X/T377PVPU3CQI4
user/release-keys
Use volume uo/down and power.
___________________________________________________
reboot system now (doesnt work, it gets stuck at the logo)
Reboot to bootloader
apply update from ADR
Apply update from SD card
Wipe data/factory reset (doesnt work, virus is blocking it)
Wipe cache partition
Mount /system
View recovery logs
Run graphics test
Power off
___________________________________________________
No Support SINGLE-SKU
Supported API: 3
E: ensure_path_unmounted failed to unmount /efs (Device or resource busy)
# MANUAL MODE v1.0.0#
-- Appling Multi-CSC...
Applied the CSC-code : SPR
Successfully applied multi-CSC
successfully verify for dmverity hash tree
E:failed to open /dev/block/bootdevice/by-name/misc: No such file or directory
****************************************************
here is my screen in download mode.
ODIN MODE
PRODUCT NAME: SM-T377P
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FAP LOCK: ON
WARRANTY VOID: 0X0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, H1, R1, A3, P1
SECURE DOWNLOAD : ENABLE
Click to expand...
Click to collapse
Are you saying in recovery mode you cannot wipe data/reset?
I've never heard of any virus being able to do this? Are you sure the device isn't MDM locked?
Also note that it can take anything up to 10-15 minutes for Android to load after a full wipe and fresh install.
ashyx said:
Are you saying in recovery mode you cannot wipe data/reset?
I've never heard of any virus being able to do this? Are you sure the device isn't MDM locked?
Also note that it can take anything up to 10-15 minutes for Android to load after a full wipe and fresh install.
Click to expand...
Click to collapse
yes, i cannot wipe data in recovery mode.
yes, you are right its MDM locked, but how can i get around that?
after fresh install i left it all night and it stayed at the sprint logo, nothing happened.
auto9999 said:
yes, i cannot wipe data in recovery mode.
yes, you are right its MDM locked, but how can i get around that?
after fresh install i left it all night and it stayed at the sprint logo, nothing happened.
Click to expand...
Click to collapse
That's the issue MDM. Who installed the MDM software?
Unfortunately now you've used Nand erase it makes it more difficult to bypass.
Your best bet is attempting to install the combination firmware and then factory resetting.
https://www.mediafire.com/file/29r6...51_T377PVPU3AQI1_SPTFAC_BoxWares.tar.zip/file
There is also the repair firmware which will wipe the device.
https://www.full-repair-firmware.com/2017/11/repair-firmware-t377p.html?m=1
Factory resetting is the key to removing it.