Database Users

[Q] Recovery Booting Stuck after install KitKat by Odin

Hi
I need a help. I was flashed by odin new KitKat rom from samsung website after passed phone restart and stuck on Recovery booting. I cant get any download mode or recovey still this same - only samsung Galaxy note 3 logo and blue info on top"Recovery Booting..." Please help me.

Think I have the same issue.
Followed the guide as quoted in this post; http://forum.xda-developers.com/showpost.php?p=49438067&postcount=402
Downloaded from post; http://forum.xda-developers.com/showpost.php?p=49448237&postcount=443
Can't boot into download mode and it doesn't connect to PC. Just stuck saying "Recovery Booting..."
Edit: I can boot into download mode. Trying the same guide again.
Edit 2: Second flash worked.

sylwek23111 said:
Hi
I need a help. I was flashed by odin new KitKat rom from samsung website after passed phone restart and stuck on Recovery booting. I cant get any download mode or recovey still this same - only samsung Galaxy note 3 logo and blue info on top"Recovery Booting..." Please help me.
Click to expand...
Click to collapse
Don t panick. I did that already... You need to disconnect the cable and take out the battery. Then you press on the 3 buttons for a while (to empty the note completely) and put the battery back in. When you press the 3 buttons again it should be in download mode again.
To me it happened i think due to the fact i didn't tick update boot loader in odin 1.85. After ticking it and flashing no problem any more. Good luck

Thank you both for help. I fixed. Now i have kitkat with root but is another problem about cwm recovery. I was flashed by odin 6.0.4.5 and was successful but not working on my phone i cant get in. Always when i pressing tree buttons is "RECOVERY BOOTING" and restarting phone and booting system normal. Any advice?

sylwek23111 said:
Thank you both for help. I fixed. Now i have kitkat with root but is another problem about cwm recovery. I was flashed by odin 6.0.4.5 and was successful but not working on my phone i cant get in. Always when i pressing tree buttons is "RECOVERY BOOTING" and restarting phone and booting system normal. Any advice?
Click to expand...
Click to collapse
I found problem. i was flashing cwm 6.0.4.5 but i should 6.0.4.6 now everything fine.:laugh:

sylwek23111 said:
I found problem. i was flashing cwm 6.0.4.5 but i should 6.0.4.6 now everything fine.:laugh:
Click to expand...
Click to collapse
Good news. :good:

orange_dutchman said:
Don t panick. I did that already... You need to disconnect the cable and take out the battery. Then you press on the 3 buttons for a while (to empty the note completely) and put the battery back in. When you press the 3 buttons again it should be in download mode again.
To me it happened i think due to the fact i didn't tick update boot loader in odin 1.85. After ticking it and flashing no problem any more. Good luck
Click to expand...
Click to collapse
thanks for your help, i thought that i will send my note 3 to claim warranty at tomorrow. My phone just stuck at the "recovery booting" after failed in flashing the rom with mobile odin pro.

Nightmare79 said:
Think I have the same issue.
Followed the guide as quoted in this post; http://forum.xda-developers.com/showpost.php?p=49438067&postcount=402
Downloaded from post; http://forum.xda-developers.com/showpost.php?p=49448237&postcount=443
Can't boot into download mode and it doesn't connect to PC. Just stuck saying "Recovery Booting..."
Edit: I can boot into download mode. Trying the same guide again.
Edit 2: Second flash worked.
Click to expand...
Click to collapse
im note able to boot into download mode any help
---------- Post added at 12:50 AM ---------- Previous post was at 12:28 AM ----------
orange_dutchman said:
Don t panick. I did that already... You need to disconnect the cable and take out the battery. Then you press on the 3 buttons for a while (to empty the note completely) and put the battery back in. When you press the 3 buttons again it should be in download mode again.
To me it happened i think due to the fact i didn't tick update boot loader in odin 1.85. After ticking it and flashing no problem any more. Good luck
Click to expand...
Click to collapse
thanks you saved me

HELP!!!!
I JUST TRIED TO JAILBREAK MY PHONE USING CF-Auto-Root-hltetmo-hltetmo-smn900t.zip AND NOW MY PHONE IS STUCK IN RECOVERY MODE. I TOOK THE BATTERY OUT AND TRIED TO BOOT IT UP NORMALLY AND IT WON'T ALLOW ME TO. :crying: WHAT DO I DO????

jmanciaz said:
I JUST TRIED TO JAILBREAK MY PHONE USING CF-Auto-Root-hltetmo-hltetmo-smn900t.zip AND NOW MY PHONE IS STUCK IN RECOVERY MODE. I TOOK THE BATTERY OUT AND TRIED TO BOOT IT UP NORMALLY AND IT WON'T ALLOW ME TO. :crying: WHAT DO I DO????
Click to expand...
Click to collapse
Reflash stock firmware with Odin and after that data reset, then find a custom recovery like this one http://goo.im/devs/philz_touch/CWM_Advanced_Edition/hltetmo and flash it with Odin and flash the latest superSU.zip in recovery and you`re rooted.

Guys, I have a problem
I was stuck on recovery rebooting and now i'm on download mode and have problem with uploading stock rom
Odin 1.85 Says "Write operation failed"
On the screen i have "WTITE PROTECTION: ENABLE
And - after "Start" of flashing
"UDC START
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2"
please help!

konradciok said:
Guys, I have a problem
I was stuck on recovery rebooting and now i'm on download mode and have problem with uploading stock rom
Odin 1.85 Says "Write operation failed"
On the screen i have "WTITE PROTECTION: ENABLE
And - after "Start" of flashing
"UDC START
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2"
please help!
Click to expand...
Click to collapse
What were you trying to do before you get this error?

hey_joe said:
What were you trying to do before you get this error?
Click to expand...
Click to collapse
I was trying to flash custom rom (alexandr) with mobile odin. But first i made CF Auto-Root
Now I have nothing but stock recovery N9005_Stock_Recovery_KK.tar.md5
Phone is rebooting on logo Samsung Galaxy Note 3.
I have access to downlowad mode and to this recovery. And now i don't now what to do...

konradciok said:
Guys, I have a problem
I was stuck on recovery rebooting and now i'm on download mode and have problem with uploading stock rom
Odin 1.85 Says "Write operation failed"
On the screen i have "WTITE PROTECTION: ENABLE
And - after "Start" of flashing
"UDC START
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 2"
please help!
Click to expand...
Click to collapse
Write the stock 4.4 ROM for your phone in normal Odin.

konradciok said:
I was trying to flash custom rom (alexandr) with mobile odin. But first i made CF Auto-Root
Now I have nothing but stock recovery N9005_Stock_Recovery_KK.tar.md5
Phone is rebooting on logo Samsung Galaxy Note 3.
I have access to downlowad mode and to this recovery. And now i don't now what to do...
Click to expand...
Click to collapse
I suggest you do the following;
First boot into stock recovery and do a factory reset, reboot and see if it boots up to android.
If that doesn't work, you can either odin a custom recovery like TWRP or CWM. Make sure you flash the latest one for KK as I've seen lots of people flashing one for 4.3 when they have a 4.4 bootloader.
Lastly, you can odin the stock firmware for your phone which can be downloaded off sammobile.

orange_dutchman said:
Don t panick. I did that already... You need to disconnect the cable and take out the battery. Then you press on the 3 buttons for a while (to empty the note completely) and put the battery back in. When you press the 3 buttons again it should be in download mode again.
To me it happened i think due to the fact i didn't tick update boot loader in odin 1.85. After ticking it and flashing no problem any more. Good luck
Click to expand...
Click to collapse
Thank you for saving my life, I love you man :laugh:

Thanks!!! Although this tutorial is for a note3 I follow all your recommendations, applied to my note4, and now my phone is working again.

Need help
Hello need help here,
I'm being dumb and fail to root my phone
I try to root my galaxy note 3 by following the step on http://forum.xda-developers.com/galaxy-note-3#root
I downloaded CF-Auto-Root-hlte-hltexx-smn9005 and kies3
However after using odin with check on PDA which is linked to the file in the zip called CF-Auto-Root-hlte-hltexx-smn9005.tar.md5
and check on auto reboot
in odin, it says that my root has pass within 13s
BUT
my device keep looping afterward and
show
Recovery Rebooting....
Recovery is not SEANDROID ENFORCING
Set Warranty Bit : Recovery
and then turned off
and then show that again
and turn off and show that again and soo on
I tried : removing battery and put it back in, it autoboot even without me pressing the power button and it goes showing above message again.
i tried to press the volume down+home+power button, nothing changed
I desperately need help here
any help is appreciated.

orange_dutchman said:
Don t panick. I did that already... You need to disconnect the cable and take out the battery. Then you press on the 3 buttons for a while (to empty the note completely) and put the battery back in. When you press the 3 buttons again it should be in download mode again.
To me it happened i think due to the fact i didn't tick update boot loader in odin 1.85. After ticking it and flashing no problem any more. Good luck
Click to expand...
Click to collapse
i tried this process which you told but also my samsung galaxy mega lte I9205 stucks on recovery booting. is there any other idea to fix it.

i have samsung galaxy mega lte I9205. i updated it to the new version of kitkat by odin. it became passed but after flashing the rom whenever i open my phone it says recovery booting on the left at the top and frequently gets switch off and opens again and again. i ticked on bootoader update on odin also but it dint fixed the problem. is there any idea to fix it.

Cant Boot up phone

I cant boot up my phone after changing permissions of font folder , the device keep vibrate at boot screen.
so i try to flash stock firmware with odin v3.09 , odin says fail.
when i enter recovery mode it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I Followed the error message , nothing worked.
Need some help.. !
EDIT : Phone : SM-N9005 , stock rom rooted with towelroot 0x0 knox
EDIT 2 : Im so panic and scared , so i decided to try using different cable and USB port
I used an 0.5 Metre long USB3 Cable(from ext harddisk) and front usb port of my pc and....
IT WORKED!!! I'm Happy and sad ,
my data all gone.. i don't have an extSD but my phone is restored !!

[HELP] SM-G900F stuck in a recovery bootloop

Hi,
I'm from Singapore and I believe I have the international s5 (SM-G900F), at least that's what it says in download mode. My phone was running CM13 nightly and till last night it was working fine. Last night when I charged it, I woke up this morning and my battery was incredibly overheated. I changed my battery and tried booting, but now it gets stuck in a bootloop. I flashed stock 5.0 lollipop from sammobile via odin, but it still is stuck. I can boot perfectly into download mode with the android logo. Here are the details:
PRODUCT NAME: SM-G900F
CURRENT BINARY: Custom
System Status: Custom
Reactivation Lock (KK): OFF
KNOX WARRANTY LOCK: 0x1 (04)
QUALCOMM SECUREBOOT: ENABLE(CSB)
RP SWERV: S1, T1, R1, A1, P1
SECURE DOWNLOAD: ENABLE
UDC START
I would really appreciate any help. Thanks!

Boot into recovery and factory reset, then try booting again
Sounds like the DATA partition got corrupted, or something installed to it did, flashing with ODIN doesn't wipe anything, so you'll still be bootlooped unless you wipe DATA / Factory Reset

When you go from cyanogenmod back to stock samsung firmware, a wipe data / factory reset is required in recovery or else the phone will be stuck in a boot loop or not boot up.

Hi, the problem is I cant access the recovery any more. Every time I hold power, volume up and the home button, it says recovery booting, warranty bit:kernel, kernel is not se android enforcing (the usual) but doesn't actually enter recovery.

imbtrthanu said:
Hi, the problem is I cant access the recovery any more. Every time I hold power, volume up and the home button, it says recovery booting, warranty bit:kernel, kernel is not se android enforcing (the usual) but doesn't actually enter recovery.
Click to expand...
Click to collapse
Flash TWRP 3.0.0.0 with ODIN and wipe from there, then flash stock again
https://dl.twrp.me/klte/twrp-3.0.0-0-klte-klte.img.tar.html

Hi I tried flashing twrp but that didn't work. It doesnt enter recovery, it still just restarts.

Is there any other way I can do a wipe? Through adb or something? Or should I select a specific option in Odin (3.09) ? Like bootloader update, etc or something?

imbtrthanu said:
Hi I tried flashing twrp but that didn't work. It doesnt enter recovery, it still just restarts.
Click to expand...
Click to collapse
Uncheck "Auto Reboot" in ODIN, flash TWRP again, when it completes, disconnect USB and pull the battery to power off the phone
Replace the battery, and boot immediately into recovery with Vol Up & Home & Power

Hi that's not working as well. Should I reflash stock and then flash twrp in the way you suggested?

Try, but something seems wrong because you should be able to flash TWRP with ODIN
Have you got the drivers installed and does ODIN give you a COM port at the top when the phone is in download mode?
You are putting the phone in download mode to flash TWRP right?
Vol Down & Home & Power

Yes I'm using Odin 3.09. I'm flashing via the AP slot. I only have F Reset time checked. My S5 is definitely in downloading mode. Looks similar to this:
http://cdn.androidblog.gs/wp-content/uploads/2014/12/Samsung-Galaxy-S5-Stuck-In-Download-Mode.png
Also, I think the drivers may be the issue here. Could you advise me on how to check and how to fix it? Thanks so much! Also, yes, the COM port lights up

imbtrthanu said:
Yes I'm using Odin 3.09. I'm flashing via the AP slot. I only have F Reset time checked. My S5 is definitely in downloading mode. Looks similar to this:
http://cdn.androidblog.gs/wp-content/uploads/2014/12/Samsung-Galaxy-S5-Stuck-In-Download-Mode.png
Also, I think the drivers may be the issue here. Could you advise me on how to check and how to fix it? Thanks so much! Also, yes, the COM port lights up
Click to expand...
Click to collapse
If the COM port lights up, the drivers are installed and working
Try ODIN 3.10.7, that's the latest version
Code:
https://mega.nz/#!vcIGmBTQ!Yr00OrGvUslQouU9E-zPf4SmpyVwL7mwIjeSG-0EAZg

Hi, that also didn't work. Any other advice?

Use a different PC / USB lead, everything you have tried should have worked fine on a G900F

Hi, I tried using a different PC and USB cable. Still nothing. Could it be because I flashed a different PIT file previously? There was a thread where someone suggested flashing a pit file, so

imbtrthanu said:
Hi, I tried using a different PC and USB cable. Still nothing. Could it be because I flashed a different PIT file previously? There was a thread where someone suggested flashing a pit file, so
Click to expand...
Click to collapse
Didn't you flash the G900F PIT?
Flash this in the PIT section of ODIN along with the stock ROM
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Extract to .pit first

Hi, I tried flashing the stock rom with the PIT you gave me but it gave me the following response:
<ID:0/005> FAIL! (Size)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas what I should do now? Also, which stock rom should I be flashing? KK or Lollipop?

I don't know what you've done to your phone, and from your main post, it is definitely a G900F if that is what it says in download mode
Which PIT did you flash the first time? And did it flash successfully?
Any stock ROM should work, but might as well go for Lollipop, I know 100% this one works
Code:
https://mega.nz/#!fVhhzRBC!A79uC8Fgg1mGCZOaujQCzBxcUUN9z_ctVVkigD8ffVM
The only thing I can think of for now is to tell KIES3 to perform a firmware recovery
Code:
http://www.samsung.com/uk/support/usefulsoftware/KIES/
If you already have KIES installed, remove it and try ODIN again, people have reported it interferes with ODIN
If not, install KIES3, go to the firmware recovery setting and see if it can fix your phone
Other than that, it looks like it's going to need someone with knowledge of manual partitioning via adb shell or something, if the phone can enter a mode the PC can use that with
EDIT - You are using a native PC running Windows 7 or later right? Not a mac running Windows? Macs don't install the drivers properly and fail

Yup I'm running Windows 10. I'll try KIES and see if that works!

Which PIT did you originally flash? And did it actually flash?

S7 edge bootloop

Hi,
I realy need your help,
I have a S7 edge who is stuck at the samsung logo.
I have flashed some stock rom (all in 7.0) via odin 3.12 after a wipe factory but nothing. So i decided to try it with Kies and smartSwitch but still nothing.
I have access to recovery and download mode.
FRP lock: On
The phone is not rooted, and the usb debugging not enabled.
The phone print this in the download mode:
ODIN MODE
Download speed: FAST
Product-Name: SM-G935F
Current Binary: Samsung Official
System Status: Custom
FRP lock: ON
Secure Downlaod: Enabled
Warranty Void: 0(0x000)
RP SWREV: B:1 K:0 S:0
After the installation of the flashed rom in the download mode, the phone reboot with a blue screen, a progress bar but it stop to 32%, and then it is printed "erasing.." and the phone reboot and is still stuck.
I have re-tryed with Kies, now the phone is with a green screen with 2 white Gears : "android is starting" but it is still stuck (i let him all the night but nothing)
i don't know what to do

nonechap said:
Hi,
I realy need your help,
I have a S7 edge who is stuck at the samsung logo.
I have flashed some stock rom (all in 7.0) via odin 3.12 after a wipe factory but nothing. So i decided to try it with Kies and smartSwitch but still nothing.
I have access to recovery and download mode.
FRP lock: On
The phone is not rooted, and the usb debugging not enabled.
The phone print this in the download mode:
ODIN MODE
Download speed: FAST
Product-Name: SM-G935F
Current Binary: Samsung Official
System Status: Custom
FRP lock: ON
Secure Downlaod: Enabled
Warranty Void: 0(0x000)
RP SWREV: B:1 K:0 S:0
After the installation of the flashed rom in the download mode, the phone reboot with a blue screen, a progress bar but it stop to 32%, and then it is printed "erasing.." and the phone reboot and is still stuck.
I have re-tryed with Kies, now the phone is with a green screen with 2 white Gears : "android is starting" but it is still stuck (i let him all the night but nothing)
i don't know what to do
Click to expand...
Click to collapse
You have to use smart switch emergency recovery function to restore your phone. It is a stand alone function within smart switch.
All you need is your phone model and serial number.
Apparently you missed a step when preparing your phone for flashing.

Or you can continue to use Odin which when you plug the USB in will show that a connection is made even though the phone says it's not in download mode.

Cosmic Blue said:
You have to use smart switch emergency recovery function to restore your phone. It is a stand alone function within smart switch.
All you need is your phone model and serial number.
Apparently you missed a step when preparing your phone for flashing.
Click to expand...
Click to collapse
I did an emergency recovery with my phone model and serial, same with kies.

nonechap said:
I did an emergency recovery with my phone model and serial, same with kies.
Click to expand...
Click to collapse
If that did not work, it looks like the memory chip on the mother board is damaged. Take it in if it is still under warranty.

Cosmic Blue said:
If that did not work, it looks like the memory chip on the mother board is damaged. Take it in if it is still under warranty.
Click to expand...
Click to collapse
it is not under warranty anymore, should i replace the motherboard ?

@nonechap bro
upgrade you bootloader before flash nougat rom
bootloader is here
https://www.androidfilehost.com/?fid=529152257862714907
modem is here
https://www.androidfilehost.com/?fid=529152257862714909
open odin and boot your phone into download mode
[1]Connect phone and wait until you get a blue sign in Odin
[2]Place the desired BL file in the [BL] slot.
[3]Place the desired CP file in the [CP] slot.
[4] Go to the Options section and make sure Auto Reboot, Re-Partition and F. reset time are unmarked.
[5]Push [Start]
Once odin reports "Success..." message in the Message box, boot your phone into download mode again
then flash again 7.0 roms via odin
then boot in recovery and wipe data and cache
and reboot device
be patience first boot takes 15 minutes or more
if fail you cant boot your device untill system status changed to official due to knox restrictions or bootloader changed to latest
if not boot that means your bootloader not update by odin due to frp lock is on
if you are on marshmellow before flash 6.0.1 firmware to boot device
firmwares are here
https://www.sammobile.com/firmwares/database/SM-G935F/
i suggest if device boots unlock bootloader first to disable knox
hit thumbs up if i helped you

rony raj said:
@nonechap bro
upgrade you bootloader before flash nougat rom
bootloader is here
https://www.androidfilehost.com/?fid=529152257862714907
modem is here
https://www.androidfilehost.com/?fid=529152257862714909
open odin and boot your phone into download mode
[1]Connect phone and wait until you get a blue sign in Odin
[2]Place the desired BL file in the [BL] slot.
[3]Place the desired CP file in the [CP] slot.
[4] Go to the Options section and make sure Auto Reboot, Re-Partition and F. reset time are unmarked.
[5]Push [Start]
Once odin reports "Success..." message in the Message box, boot your phone into download mode again
then flash again 7.0 roms via odin
then boot in recovery and wipe data and cache
and reboot device
be patience first boot takes 15 minutes or more
if fail you cant boot your device untill system status changed to official due to knox restrictions or bootloader changed to latest
if not boot that means your bootloader not update by odin due to frp lock is on
if you are on marshmellow before flash 6.0.1 firmware to boot device
firmwares are here
https://www.sammobile.com/firmwares/database/SM-G935F/
i suggest if device boots unlock bootloader first to disable knox
hit thumbs up if i helped you
Click to expand...
Click to collapse
In this case, when i flash the rom, should i use the 4 files or only the AP file ?

nonechap said:
In this case, when i flash the rom, should i use the 4 files or only the AP file ?
Click to expand...
Click to collapse
use old odin

rony raj said:
use old odin
Click to expand...
Click to collapse
What version of odin should i use ?
And i have to use only the AP file or the 4 files of the 7.0 rom after the bootloader update? (AP BL CP CSC)

nonechap said:
What version of odin should i use ?
And i have to use only the AP file or the 4 files of the 7.0 rom after the bootloader update? (AP BL CP CSC)
Click to expand...
Click to collapse
odin v3.09 or 3.12
update bootloader and modem from given first post by me

rony raj said:
odin v3.09 or 3.12
update bootloader and modem from given first post by me
Click to expand...
Click to collapse
Yes i know but when i have updated the bootload with the 2 files you gave me, i have to reboot in download mod and flash the 7.0 rom, but i have download the rom and i have 4 files, so should i flash only the AP or the four files ?

nonechap said:
Yes i know but when i have updated the bootload with the 2 files you gave me, i have to reboot in download mod and flash the 7.0 rom, but i have download the rom and i have 4 files, so should i flash only the AP or the four files ?
Click to expand...
Click to collapse
tell me rom on your device before bootloop
6.0 or 7.0

rony raj said:
tell me rom on your device before bootloop
6.0 or 7.0
Click to expand...
Click to collapse
6.0.1

nonechap said:
6.0.1
Click to expand...
Click to collapse
then flash 6.0 firmware
download from here
https://www.sammobile.com/firmwares/database/SM-G935F/

rony raj said:
then flash 6.0 firmware
download from here
https://www.sammobile.com/firmwares/database/SM-G935F/
Click to expand...
Click to collapse
I tried but still nothing, i think i have to replace the motherboard ?

nonechap said:
I tried but still nothing, i think i have to replace the motherboard ?
Click to expand...
Click to collapse
try another chance
To do the S7 FRP OFF - Put phone in download mode
Once phone is in download mode.
Flash the files which i will provide.
You Only need to flash boot.tar via odin for respective models (example for s7 use G930 Qualcomm folder) for (s7 edge use G935 Qualcomm folder)
Once you flash the boot tar file. The phone will reboot and it will enable ADB. Run the Bat file which i will provide and it will remove the FRP lock
Once done put the phone in Downlaod mode and flash stock ROM.
The whole process takes less than 10 mins.
Same Idea for S7 Exynos phones... put phone in downlaod mode and then flash the file (G930F(ENGroot) for s7 models & (G935F_Root for s7 edge models). Once done phone will reboot. Then use this bat file (g935f.bat). Once this is executed locks will be removed and phone will go in download mode. Flash stock Boot.img and ALL DONE.
download
https://mega.nz/#!Tw0TAI6I!jCGuxGrwqCGEy3flcRqF9EpzbaTkby7SJ_slKRaXqRs

rony raj said:
try another chance
To do the S7 FRP OFF - Put phone in download mode
Once phone is in download mode.
Flash the files which i will provide.
You Only need to flash boot.tar via odin for respective models (example for s7 use G930 Qualcomm folder) for (s7 edge use G935 Qualcomm folder)
Once you flash the boot tar file. The phone will reboot and it will enable ADB. Run the Bat file which i will provide and it will remove the FRP lock
Once done put the phone in Downlaod mode and flash stock ROM.
The whole process takes less than 10 mins.
Same Idea for S7 Exynos phones... put phone in downlaod mode and then flash the file (G930F(ENGroot) for s7 models & (G935F_Root for s7 edge models). Once done phone will reboot. Then use this bat file (g935f.bat). Once this is executed locks will be removed and phone will go in download mode. Flash stock Boot.img and ALL DONE.
download
https://mega.nz/#!Tw0TAI6I!jCGuxGrwqCGEy3flcRqF9EpzbaTkby7SJ_slKRaXqRs
Click to expand...
Click to collapse
After flashing boot.tar, when i run the .bat, it says error: closed
EDIT: i have to enter into the recovery mod and select "adb update" in order to make my phone detected by my computer

Those files are for the S7. Do they work for the S7 Edge also?
Edit - I tried it and it fails in odin. My phone is bricked.
rony raj said:
@nonechap bro
upgrade you bootloader before flash nougat rom
bootloader is here
https://www.androidfilehost.com/?fid=529152257862714907
modem is here
https://www.androidfilehost.com/?fid=529152257862714909
open odin and boot your phone into download mode
[1]Connect phone and wait until you get a blue sign in Odin
[2]Place the desired BL file in the [BL] slot.
[3]Place the desired CP file in the [CP] slot.
[4] Go to the Options section and make sure Auto Reboot, Re-Partition and F. reset time are unmarked.
[5]Push [Start]
Once odin reports "Success..." message in the Message box, boot your phone into download mode again
then flash again 7.0 roms via odin
then boot in recovery and wipe data and cache
and reboot device
be patience first boot takes 15 minutes or more
if fail you cant boot your device untill system status changed to official due to knox restrictions or bootloader changed to latest
if not boot that means your bootloader not update by odin due to frp lock is on
if you are on marshmellow before flash 6.0.1 firmware to boot device
firmwares are here
https://www.sammobile.com/firmwares/database/SM-G935F/
i suggest if device boots unlock bootloader first to disable knox
hit thumbs up if i helped you
Click to expand...
Click to collapse

Works !!!
Sorry to revive an old thread but I think it might help people recover from a bootloop with a bit of addtional explanation than initially provided.
So I have an S7 Edge as a backup phone and hadn't used it for a while. Google FRP was activated. I tried to update to a newer firmware through Odin (can't OTA since it's from Tmo and i'm in Canada). Anyways for whatever reason it failed in the middle and I was stuck in a bootloop that wouldn't stop. I tried downgrading, I tried factory, I tried new versions, nothing would do, I'm assuming because of FRP.
So I followed Rony Raj's post https://forum.xda-developers.com/showpost.php?p=71906126&postcount=17 but kept getting stuck. The thing is once you flash the proper Boot.tar file, the phone will appear to still be in a bootloop. You will have to go with the screen (the phone) and the sound of the connection and disconnection from your computer. So basically just sync with the sounds and time it so you open the ''S7 & S7 Edge QUALCOMM.bat'' file at the exact time your phone reconnects and it'll work. I had to do it about 6-7 times before i got it right.
When that is done your phone will restart in download mode. When you do just flash the latest version of the firmware you get from AndroidFileHos*.com or Sammobil*.com. Make sure you select all 4 files in Odin (BL, AP, CP and SELECT CSC HOME for CSC - NOT CSC).
Once all that is done your phone will restart and everything should be fine, well that worked for me
Thanks a lot to @rony raj for putting together the files and the steps to save my G935

Deleted Nand on Samsung GalaXY tab 4 sm-t337v

Sm-t337v band gone
Hi I too click the nand in odin and now I can't get it pass the Samsung galaxy tab icon.
I have gotten a put file and did that it passed tried to do a stock firmware it won't go passed the icon
It wont let me attach them here is what it says
Odin mode
Product name SM-T337V
Current binary Samsung official
System status official
Reactivation lock off
Qualcomm secure boot enable (csb)
Rp sr s1 t1 r1 a3 p1
Secure download enable
Udc start that's the safe mode I think
But I also can get in to recovery mode as well it also says mutil csc?
it says this
manual mode
applying muti-csc...
applied the csc-code; VZW
successfully applied muti-csc
I have wiped the cache
it states
android systems recovery 3e
LMY47X.T337VVRS3BPL1
VOL UP AND DOWN TO HIGHLIGHT
POWER BUTTON TO SELECT
I CAN REBOOT
apply update from adb or external storage or from cache
i can wipe data/factory reset which doesnt do a thing
i can wipe cache partition reboot to bootloader and power down.
SO someone on here has to know how i can fix this im so stupid i could kick myself
please email me at [email protected] I am in IT so I know some what to do but not alot
ty
tammy

download odin 3.13.1 and download official firmware T337VVRS3BPL1 5.1.1 and use AP slot and place tablet in download mode and flash.