Database Users

Samsung Galaxy s7 Edge Rooting Issues

I rooted my Samsung Galaxy s7 edge successfully through the use of CF auto root and odin. After sometime I was trying to disable fused location with the app named Disable Services when my phone rebooted and gave me the error "Custom Binary blocked by FRP lock". So I researched and found a solution which was to download a firmware on to my device with odin. I downloaded this firmware from a site called sammobile
which was successful.
Now the problem is that whenever I try to re-root my device it gives me the error "recovery is not seandroid enforcing" which I bypass by booting from recovery mode but when I check the root access it is not available.
So how can I re-root my device?
Note: Though root access is not available I still cannot update my phone because it says that it is modified.
Model number: SM-G935F

did you know that to root and/or install custom roms or recoveries, you have to have OEM Unlock checked. And after you can't go and uncheck it or else it will fail to boot and gives you that FRP lock words. just something i found out. Just leave it if you are rooting your device, if you want to go back to stock, you can then go and uncheck OEM unlock. later

"custom binary blocked by frp lock"

Edit: No one replied with a good answer so i reinstalled stock recovery while keeping root and turned off OEM Unblock and it bricked my device with "custom binary blocked by frp lock" and i am currently fixing it with Smart Switch initialization. Moral of the story: Never disable OEM Unlock
(A5 2016)
Does this happen after you turn off OEM Unlock because the recovery is not stock (TWRP is installed) or because the device is rooted or both?
If after rooting with https://forum.xda-developers.com/sa...overy-samsung-sm-a510f-fd-exynos7580-t3314399 i flash stock recovery and turn off OEM Unlock will i still get this message?
Thanks!
Please note that i had the "custom binary blocked by frp lock" error but i fixed it with Smart Switch initialization. I want to turn off OEM Unlock for security reasons

just flash previous firmware version which u have in your phone before frp lock.
nothing to worry its not bricked.
only ensure version u are going to flash is same as before , flash via odin and enjoy

I already did it, my question is that if i remove TWRP and install the stock recovery while keeping root, will disabling "OEM Unlock" show "custom binary blocked by frp lock"

Help
I am going through a similar enigma. I have S7 Edge. If I log in with Google and then turn down unlock on will I get custom binary error? Any help would be greatly appreciated.

@CrystalGTX
This is an old thread, but I am having the same problem; (stupidly) unchecked OEM Unlock. Reboot, and now I have "Custom binary blocked by FRP lock".
When you say "fixed it with Smart Switch initialization", does that essentially mean reflashing firmware?
And as a result, erasing all data?
I've read that flashing stock firmware can save the hardware, but I'm much more concerned about the data; I need my contacts, photos, txts, etc.
EDIT: Err, shoot. I see now this was posted by a Guest, so I doubt the OP is going to give me a response. Anyone else help?

Samsung galaxy S8 G950N frp google account lock bypass method!!!

Hey guys I have the combination firmware for Samsung galaxy S8 korean version G950N and with the stock firmware the frp can be bpassed easily.
Here is a link for the combination firmware
you can find stock firmware at firmwarefile. com
remove the spaces in the link
After the download flash the combination firmware using odin then after a few reboots turn of the phone and flash the stock firmware using odin and make sure to skip (don't flash) the "CP" tab then when the phone boots complete partially incomplete setup wizard and goto settings make factory reset.

Not working. I have an error: disk corupted, must reset. And that's it, I 'm in same frp

Thread closed

FRP Lock, No System installed, OEM & USB-Debugging off

Hello,
I have a Samsung Galaxy S7 edge ( SM-G935F ) Exynos Version.
I flashed the new Oreo Firmware with Odin. I have also a Samsung Gear 3 and wanted to use SHealth. I rooted the device ( didnt work) .
I set back the OEM setting in the Developer Options and turned off USB-Debugging. After restarting I got an ERROR: Custom binary blocked by FRP Lock.
I deleted my Data : "Wipe data/factory reset" in the Android Recovery
Now my Problem: I cannot flash the Stock Firmware again and i cannot flash TWRP.
So I think i dont have Android and i also dont have enabled the options OEM & USB-Debugging.
Has anyone an Idea what to do?

Redischen said:
Hello,
I have a Samsung Galaxy S7 edge ( SM-G935F ) Exynos Version.
I flashed the new Oreo Firmware with Odin. I have also a Samsung Gear 3 and wanted to use SHealth. I rooted the device ( didnt work) .
I set back the OEM setting in the Developer Options and turned off USB-Debugging. After restarting I got an ERROR: Custom binary blocked by FRP Lock.
I deleted my Data : "Wipe data/factory reset" in the Android Recovery
Now my Problem: I cannot flash the Stock Firmware again and i cannot flash TWRP.
So I think i dont have Android and i also dont have enabled the options OEM & USB-Debugging.
Has anyone an Idea what to do?
Click to expand...
Click to collapse
So you have disabled oem unlock and you can't flash custom rom or recovery due to custom binary blocked by frp error..
Also you can't flash stock rom due to dm verity error if i guessed correctly?
You are badly stuck... maybe follow this thread it may help https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963/
Sent from my S7 Edge using XDA Labs

I'm in the same situation and the link is dead. please help..
..
shah22 said:
So you have disabled oem unlock and you can't flash custom rom or recovery due to custom binary blocked by frp error..
Also you can't flash stock rom due to dm verity error if i guessed correctly?
You are badly stuck... maybe follow this thread it may help https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963/
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse

SW Rev Check Fail fused 5 Binnary 1

trying to flash SM-G950U to stock and I keep getting SW Rev Check Fail fused 5 Binary 1
could anyone point me to what file i need to use i would appreciatw greatly as it has been a week and i have search on google and youtube and i can't figure it out
VZW S8 that had had FRP lock so i flashed to combination file and now I have only binary mode when the phone boot
when i go in binary mode and check under settings i have the followings
SM-G950U
Android 8.0
Secuirty Level Feb 1 2017
baseband: G950USQU5CRF1
Kernel 4.4.16-13344735
build NRD90M.FA70_G950USQU5ARG4
Download mode I have
Carrier : VZW
RPMB fuse blow
RPMB Provisioned
Current Binary: Samsung official
System Status : Official
FRP Lock : off
warranty void 0x0.
qualcom secure boot enabled
RP SWREV B5 (2.1.1.1.1) K4 S5
secure download enabled

dzpower16 said:
trying to flash SM-G950U to stock and I keep getting SW Rev Check Fail fused 5 Binary 1
could anyone point me to what file i need to use i would appreciatw greatly as it has been a week and i have search on google and youtube and i can't figure it out
VZW S8 that had had FRP lock so i flashed to combination file and now I have only binary mode when the phone boot
when i go in binary mode and check under settings i have the followings
SM-G950U
Android 8.0
Secuirty Level Feb 1 2017
baseband: G950USQU5CRF1
Kernel 4.4.16-13344735
build NRD90M.FA70_G950USQU5ARG4
Download mode I have
Carrier : VZW
RPMB fuse blow
RPMB Provisioned
Current Binary: Samsung official
System Status : Official
FRP Lock : off
warranty void 0x0.
qualcom secure boot enabled
RP SWREV B5 (2.1.1.1.1) K4 S5
secure download enabled
Click to expand...
Click to collapse
Moved to Q&A
Also you are flashing older firmware than is on the device
As in you are trying to downgrade which is not possible fine your version of firmware and reflash

The same problem
I have the same phone and the same problem, u already fixed? , help me please ?????
---------- Post added at 11:53 PM ---------- Previous post was at 11:47 PM ----------
dzpower16 said:
trying to flash SM-G950U to stock and I keep getting SW Rev Check Fail fused 5 Binary 1
could anyone point me to what file i need to use i would appreciatw greatly as it has been a week and i have search on google and youtube and i can't figure it out
VZW S8 that had had FRP lock so i flashed to combination file and now I have only binary mode when the phone boot
when i go in binary mode and check under settings i have the followings
SM-G950U
Android 8.0
Secuirty Level Feb 1 2017
baseband: G950USQU5CRF1
Kernel 4.4.16-13344735
build NRD90M.FA70_G950USQU5ARG4
Download mode I have
Carrier : VZW
RPMB fuse blow
RPMB Provisioned
Current Binary: Samsung official
System Status : Official
FRP Lock : off
warranty void 0x0.
qualcom secure boot enabled
RP SWREV B5 (2.1.1.1.1) K4 S5
secure download enabled
Click to expand...
Click to collapse
What u doing?, u fixed the phone?

BierdMelo said:
I have the same phone and the same problem, u already fixed? , help me please
---------- Post added at 11:53 PM ---------- Previous post was at 11:47 PM ----------
What u doing?, u fixed the phone?
Click to expand...
Click to collapse
Did you even read the response above

NEED HELP
TheMadScientist said:
Did you even read the response above
Click to expand...
Click to collapse
?I have a Samsung S8 SM-G950U . I am trying to bypass the FRP and i did but now the phone i stuck in factory Binary mode. I cant find the firmware anywhere online nrd90m.fa70_g950usqu5arg4 . Can you help?

nuro2019 said:
?I have a Samsung S8 SM-G950U . I am trying to bypass the FRP and i did but now the phone i stuck in factory Binary mode. I cant find the firmware anywhere online nrd90m.fa70_g950usqu5arg4 . Can you help?
Click to expand...
Click to collapse
Factory binary mode is the firmware. For bypassing. Now you need to factory reset from there and then flash stock it u5 firmware

NEED HELP
TheMadScientist said:
Factory binary mode is the firmware. For bypassing. Now you need to factory reset from there and then flash stock it u5 firmware
Click to expand...
Click to collapse
What is U5 firmware? Sorry this is my first time doing this and your the only one that can help. Thank you so much

nuro2019 said:
What is U5 firmware? Sorry this is my first time doing this and your the only one that can help. Thank you so much
Click to expand...
Click to collapse
According to the combination you listed above 5th digit from far end is antiroll back value. Your on a revision 5. So sammobile or updato will have your firm Ware needed. 5th digit back must be a 5 but like I said before flashing that in Odin make sure to do a factory reset from inside settings in the combo firmware

hello! can you help me. im trying to root my phone and now stuck on download mode. show this error messages "fused 5 binary 1"
i need a link to download last firmware i think?