I have been trying to install a new firmware using odin3. It doesn't work and it keeps showing "SW REV. CHECK FAIL(BOUTLORDER) DEVICE: 8. BINARY:1
My phone model is SM-G935F
My suddenly enter custom binary frp lock mode
My Samsung S7 edge model is SM-G935F. My AP SWREV shows B:8 K:6 S:7. Please, where can I download the correct firmware file that will be compatible with my phone binary?
Ksam1 said:
My suddenly enter custom binary frp lock mode
My Samsung S7 edge model is SM-G935F. My AP SWREV shows B:8 K:6 S:7. Please, where can I download the correct firmware file that will be compatible with my phone binary?
Click to expand...
Click to collapse
Hello There!
You can download your Firmware here (https://galaxyfirmware.com/model/SM-G935F/)
while finding a firmware, you will see something like this G935FXXS8ETC1, the 9th digit is the Bootloader Version or BINARY. since your binary is 8 you should find a firmware with the same Binary. I think you can choose any region right there as long as its open-line (choosing a different region from yours might end up a slow device).
Since your BINARY IS 8, you can only download a Android 8 Firmware for your S7 Edge.
Goodluck!
Related
Hello so here is the problem, I restarted my phone last night then i got a error saying custom binary blocked by frp lock. So i followed steps and waited hours for firmware to download to get nothing but fails on Odin. I am now getting SW REV. CHECK FAIL DEVICE: 2 BINARY: 1
I have downloaded the very last firmware from this site and it has not worked any suggestions would be very helpful.
the website is: sammobile SM-G928P the very last one the is 5.1.1
I could use any help please and thank you.
DETAILS: SM-G928P (Samsung Galaxy S6 Edge +)
Current Binary: Custom
System Status: Custom
FRP Lock: On
Phone cannot be used at all but the Downloading screen ODIN MODE and the start up screen with the custom binary blocked frp lock
trying to flash SM-G950U to stock and I keep getting SW Rev Check Fail fused 5 Binary 1
could anyone point me to what file i need to use i would appreciatw greatly as it has been a week and i have search on google and youtube and i can't figure it out
VZW S8 that had had FRP lock so i flashed to combination file and now I have only binary mode when the phone boot
when i go in binary mode and check under settings i have the followings
SM-G950U
Android 8.0
Secuirty Level Feb 1 2017
baseband: G950USQU5CRF1
Kernel 4.4.16-13344735
build NRD90M.FA70_G950USQU5ARG4
Download mode I have
Carrier : VZW
RPMB fuse blow
RPMB Provisioned
Current Binary: Samsung official
System Status : Official
FRP Lock : off
warranty void 0x0.
qualcom secure boot enabled
RP SWREV B5 (2.1.1.1.1) K4 S5
secure download enabled
dzpower16 said:
trying to flash SM-G950U to stock and I keep getting SW Rev Check Fail fused 5 Binary 1
could anyone point me to what file i need to use i would appreciatw greatly as it has been a week and i have search on google and youtube and i can't figure it out
VZW S8 that had had FRP lock so i flashed to combination file and now I have only binary mode when the phone boot
when i go in binary mode and check under settings i have the followings
SM-G950U
Android 8.0
Secuirty Level Feb 1 2017
baseband: G950USQU5CRF1
Kernel 4.4.16-13344735
build NRD90M.FA70_G950USQU5ARG4
Download mode I have
Carrier : VZW
RPMB fuse blow
RPMB Provisioned
Current Binary: Samsung official
System Status : Official
FRP Lock : off
warranty void 0x0.
qualcom secure boot enabled
RP SWREV B5 (2.1.1.1.1) K4 S5
secure download enabled
Click to expand...
Click to collapse
Moved to Q&A
Also you are flashing older firmware than is on the device
As in you are trying to downgrade which is not possible fine your version of firmware and reflash
The same problem
I have the same phone and the same problem, u already fixed? , help me please ?????
---------- Post added at 11:53 PM ---------- Previous post was at 11:47 PM ----------
dzpower16 said:
trying to flash SM-G950U to stock and I keep getting SW Rev Check Fail fused 5 Binary 1
could anyone point me to what file i need to use i would appreciatw greatly as it has been a week and i have search on google and youtube and i can't figure it out
VZW S8 that had had FRP lock so i flashed to combination file and now I have only binary mode when the phone boot
when i go in binary mode and check under settings i have the followings
SM-G950U
Android 8.0
Secuirty Level Feb 1 2017
baseband: G950USQU5CRF1
Kernel 4.4.16-13344735
build NRD90M.FA70_G950USQU5ARG4
Download mode I have
Carrier : VZW
RPMB fuse blow
RPMB Provisioned
Current Binary: Samsung official
System Status : Official
FRP Lock : off
warranty void 0x0.
qualcom secure boot enabled
RP SWREV B5 (2.1.1.1.1) K4 S5
secure download enabled
Click to expand...
Click to collapse
What u doing?, u fixed the phone?
BierdMelo said:
I have the same phone and the same problem, u already fixed? , help me please
---------- Post added at 11:53 PM ---------- Previous post was at 11:47 PM ----------
What u doing?, u fixed the phone?
Click to expand...
Click to collapse
Did you even read the response above
NEED HELP
TheMadScientist said:
Did you even read the response above
Click to expand...
Click to collapse
?I have a Samsung S8 SM-G950U . I am trying to bypass the FRP and i did but now the phone i stuck in factory Binary mode. I cant find the firmware anywhere online nrd90m.fa70_g950usqu5arg4 . Can you help?
nuro2019 said:
?I have a Samsung S8 SM-G950U . I am trying to bypass the FRP and i did but now the phone i stuck in factory Binary mode. I cant find the firmware anywhere online nrd90m.fa70_g950usqu5arg4 . Can you help?
Click to expand...
Click to collapse
Factory binary mode is the firmware. For bypassing. Now you need to factory reset from there and then flash stock it u5 firmware
NEED HELP
TheMadScientist said:
Factory binary mode is the firmware. For bypassing. Now you need to factory reset from there and then flash stock it u5 firmware
Click to expand...
Click to collapse
What is U5 firmware? Sorry this is my first time doing this and your the only one that can help. Thank you so much
nuro2019 said:
What is U5 firmware? Sorry this is my first time doing this and your the only one that can help. Thank you so much
Click to expand...
Click to collapse
According to the combination you listed above 5th digit from far end is antiroll back value. Your on a revision 5. So sammobile or updato will have your firm Ware needed. 5th digit back must be a 5 but like I said before flashing that in Odin make sure to do a factory reset from inside settings in the combo firmware
hello! can you help me. im trying to root my phone and now stuck on download mode. show this error messages "fused 5 binary 1"
i need a link to download last firmware i think?
From what I've been able to google, this means my bootloader is still locked. If I try to flash with Odin, I get this:.
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G930U
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Officail
FRP LOCK: OFF
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: B4(2, 1, 1, 1, 1) K1 S3
SECURE DOWNLOAD : ENABLE
I know Odin detects the phone, it doesn't seem to be an issue with computer -> phone connection.
turned on OEM Unlock and USB debugging, fired up Odin and my phone is telling me the following when I boot it into recovery:
SECURE CHECK FAIL : recovery
And in Odin, the log looks happy as a clam, then tells me
FAIL! (Auth)
I'm really not sure why this is happening shows OEM Unlock as being enabled. I know Odin detects the phone, it doesn't seem to be an issue with computer -> phone connection.
loop on recovery booting and the phone does not accept any official U or V FW
the error is" unsupport dev_type"
please help me
I think you tried to flash custom recovery? Flash stock rom downloaded from updato, heres the link https://updato.com/firmware-archive-select-model?record=839E6F7BC66911E89F15FA163EE8F90B
I also noticed you have a 930, this is edge (935) forum
Additionally, you have 930U, Snapdragon device with locked and not unlockable bootloader. If you are attempting to unlock your bootloader by switching OEM Unlock you won't be able to do it since at 21 december 2018 locked Snapdragon S7 bootloader is not unlockable by any known way
I have an sm-935v which has not taken updates since way before dec 2018, it is at baseband 4 (the 5th digit from rt to lft). Does that mean my bootloader is possibly NOT locked? How would u go about checking if it is in fact unlocked? I have already rooted my s7edge using kingoroot. The android version is 8.0.
i have s7 edge g935u qualcom (oreo version) iwant to install twrp but i did not find qualcombased file is anyone help me....?
Hello i have bootloap on my Samsung Galaxy S8 Plus ( SM-G955F).
1) I succesfully rooted phone by this vid. www,youtube,com/watch?v=XNznlTJJesc(just replace , after www and after youtube)
2) In App Magidisk i download Busybox and i have restarted phone.
3) Phone starts by ,,Samsung Galaxy S8 Plus" but in left corner is ,,Only official released binaries are allowed to be flashed".
Please, please you all, help me with this
I will love you!
Thank you a lot for any response.
Sorry for my bad english.
UPDATE
Update
odin mode
download speed: Fast
product name : Sm-g955f
current binary : Custom
system status : Custom
amm status : Prenormal
fap lock : Off
oem lock : Off
secure download : Enabled
..
..
Sw rev. Check fail (bootloader) device: 4, binary 1
moullcz said:
Update
odin mode
download speed: Fast
product name : Sm-g955f
current binary : Custom
system status : Custom
amm status : Prenormal
fap lock : Off
oem lock : Off
secure download : Enabled
..
..
Sw rev. Check fail (bootloader) device: 4, binary 1
Click to expand...
Click to collapse
1. Sw rev check fail - you are try to flash older firmware than what is on your phone. You will need to find firmware with bootloader 4 or higher ( 5th number from right of firmware name.
2. Official binary error is due to your rmm state being in pre-normal. This guide maybe of some help to you.
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
3. If you want to downgrade you will need firmware with the same bootloader version as what is on your phone.
Fixed by new ap & bt
spawnlives said:
1. Sw rev check fail - you are try to flash older firmware than what is on your phone. You will need to find firmware with bootloader 4 or higher ( 5th number from right of firmware name.
2. Official binary error is due to your rmm state being in pre-normal. This guide maybe of some help to you.
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
3. If you want to downgrade you will need firmware with the same bootloader version as what is on your phone.
Click to expand...
Click to collapse
I downladed new OS from sammobile and installed by odin.
Fixed. Thank you!
Can't flash firmware for S7 Edge G935V. Error: SW REV CHECK FAIL: Fused 10 > Binary 4
The firmware is G935VVRS4CRI1 (Android 8.0). Current firmwave on my S7 Edge G935V is G935VVRUACSH1.
I use Odin v3.13.1 to flash and meet this error:
SW REV CHECK FAIL: Fused 10 > Binary 4
How do I fix it? Thank you!
i get the same thing unsure of what to do
duchoa1995 said:
The firmware is G935VVRS4CRI1 (Android 8.0). Current firmwave on my S7 Edge G935V is G935VVRUACSH1.
I use Odin v3.13.1 to flash and meet this error:
SW REV CHECK FAIL: Fused 10 > Binary 4
Click to expand...
Click to collapse
You are attempting to flash an old bootloader version over a new bootloader. This message directly means that the e-fuse for a v10 bootloader is trying to be flashed over a v4 bootloader. You can identify the version of bootloader by looking at the fifth digit from the end of the firmware (G935VVRS4CRI1=v4, G935VVRUACSH1=v10). If you want to flash a stock frimware,please ensure that fifth digit from the end matches, as the bootloader version was upgraded early in 2019.
njmcinty said:
You are attempting to flash an old bootloader version over a new bootloader. This message directly means that the e-fuse for a v10 bootloader is trying to be flashed over a v4 bootloader. You can identify the version of bootloader by looking at the fifth digit from the end of the firmware (G935VVRS4CRI1=v4, G935VVRUACSH1=v10). If you want to flash a stock frimware,please ensure that fifth digit from the end matches, as the bootloader version was upgraded early in 2019.
Click to expand...
Click to collapse
Thank you so much. This will be helpful! :good:
duchoa1995 said:
The firmware is G935VVRS4CRI1 (Android 8.0). Current firmwave on my S7 Edge G935V is G935VVRUACSH1.
I use Odin v3.13.1 to flash and meet this error:
SW REV CHECK FAIL: Fused 10 > Binary 4
How do I fix it? Thank you!
Click to expand...
Click to collapse
Also because your device does not have an unlocked bootloader you are stuck on that firmware it is impossible to downgrade back to nougat. I have tried with every piece of firmware that exists for this variant and it is totally a 100% fused to at least V8. Now I'm on the absolute latest firmware which is V10. Luckily the Eng boot image for V8 still works on V10. But until they use the same bootloader on this firmware you will not be able to downgrade. However it is not looking very good that they will use the same one. Generally that only happens in some cases with the first firmware revision to the new Android version. In the case of g930p, there was no such instance. Basically your phone is the same phone is mine the only thing that differs is the carrier.
DragonFire1024 said:
Also because your device does not have an unlocked bootloader you are stuck on that firmware it is impossible to downgrade back to nougat. I have tried with every piece of firmware that exists for this variant and it is totally a 100% fused to at least V8. Now I'm on the absolute latest firmware which is V10. Luckily the Eng boot image for V8 still works on V10. But until they use the same bootloader on this firmware you will not be able to downgrade. However it is not looking very good that they will use the same one. Generally that only happens in some cases with the first firmware revision to the new Android version. In the case of g930p, there was no such instance. Basically your phone is the same phone is mine the only thing that differs is the carrier.
Click to expand...
Click to collapse
Actually I try all ways I can find to fix the "camera failed" error, but it's still not working now. So if I downgrade my phone to previous firmwares (as V10, V9, V8...), can I maybe fix it?