Hello so here is the problem, I restarted my phone last night then i got a error saying custom binary blocked by frp lock. So i followed steps and waited hours for firmware to download to get nothing but fails on Odin. I am now getting SW REV. CHECK FAIL DEVICE: 2 BINARY: 1
I have downloaded the very last firmware from this site and it has not worked any suggestions would be very helpful.
the website is: sammobile SM-G928P the very last one the is 5.1.1
I could use any help please and thank you.
DETAILS: SM-G928P (Samsung Galaxy S6 Edge +)
Current Binary: Custom
System Status: Custom
FRP Lock: On
Phone cannot be used at all but the Downloading screen ODIN MODE and the start up screen with the custom binary blocked frp lock
Related
Good evening!
This is my first post and I would get a fix on my device, if is possible.
I found every kind of tutorial to flash this device.
I used differents version of Odin with no success
My device is:
Samsung Galaxy A7 SM-A700F
In ODIN MODE appear those details:
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID: 1
RP SWREP: 2
I tried to put into this device Android 4.4 (original rom) and the last one.
I can access only on Download Mode, but not in Recovery Mode... I would make a wipecache, or reset nand, but I can't get into Recovery Mode.
I bought online as not working phone, so I don't know what can I do on it.... Could be bricked?
I have sm-g935f unlocked and rooted I flashed sac23 s9 rom through twrp recovery 3days ago and I noticed there was no signal and it would say not registered on network when try to use it and imei and other info was UNKNOWN I tried to connect to my giff gaff network settings but no luck searched everywhere on web tried many fixes with no luck then went to connect to my pc to flash official firmware and said USB NOT RECOGNISED I uninstalled usb drivers and installed new ones with no luck so I flashed through twrp project dream 1.3 rom with same issues so tried another sac23 B17 debloated rom with the same issues so I restarted the phone then it came on black screen and says : PRODUCT NAME: SM-G935F CURRENT BINARY: CUSTOM SYSTEM STATUS: CUSTOM FRP LOCK: ON SECURE DOWNLOAD: ENABLED WARRENTY VOID: 1 (0 030c) RP SWREV: B:2 K:0 S:1. Download mode is the only thing that I can do now but cannot connect to pc to flash official firmware so please if you can help I would be very great full. Thanks in advance Lisa
Hi recently I believe I soft-bricked my Galaxy S8 SM-G950U I was having trouble getting service on it, It would only work on like major roads so I knew something was wrong with it so I tried to get the device fully updated and everything by going in the setting menu in Android and doing it from there It still was doing the same issues. So I went about restoring it with OEM firmware with Odin, everything worked when I restarted it, it was running more smoothly and everything. So since I achieved doing that I was like might as well root it so I installed firmware in Odin then everything messed up I couldn't get into my boot-loader anymore. So I reflashed the stock files that originally worked at first and I was having the same issue. In the bootloader it's on a blue screen I see no command for a second and then it goes to installing updates and the screen keeps on flashing. I believe it's because I reflashed a firmware that had a loader bootloader I believe it was the v2 bootloader. I need the v3 bootloader for ATT galaxy I can't find it on any site preferably all the Odin files needed. Please any expert let me know if you experience this thanks!
DOWNLOAD MODE
CARRIER : ATT
RPMB fuse blown
RPMB PROVISIONED
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS : OFFICIAL
FRP LOCK : ON
WARRANTY VOID : 0x0
QUALCOMM SECUREBOOT : ENABLED
RP SWREV : B5(2,1,1,1,1) K4 S5
SECURE DONLOAD : ENABLED
DID : 205EA46632FD
Hi everyone,
so it was working perfectly this morning, then i factory resetted it, and used it for a few hours, but forgot to turn on oem unlocking in dev options. And then when i rebooted it it never turned on after that. it showed Custom binary blocked by frp lock on upper right corner in red color.
i had encountered this issue before so i knew the solution, i simply fired up my odin3 3.14. and started flashing my stock rom. after it was done it gave me another error
Failed to mount /system as rw and started restarting after that error.
i had encountered this issue before also, so i knew the solution, i downloaded the latest twrp for herolte, and last time when i did that it successfully installed and then i flashed encyption disabler zip, and it was a happy ending to a stressful evening. but unfortunately this time it wasnt like last time, it was one of those anime fighting comeback scenes where you think you have defeated the villain but he comes back, So this time when i tried flashing the last twrp through odin it said "FAIL!" and on the phone appeared the message "Custom binary (RECOVERY) Blocked By FRP Lock"
please help me fix this phone, i solely use it for watching movies and stuff, no sim card,
ask me any other detail that i might've forgotten to mention.
Here's download mode stats:
ODIN MODE
DOWNLOAD MODE: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
FRP LOCK: ON
Secure Download: Enabled
WARRENTY VOID: 1 (0x0500)
RP SWREV: B:8 K:6 S:7
Custom Binary(RECOVERY) Blocked by FRP Lock
You guys are my last hope, Send help.....
I have been trying to install a new firmware using odin3. It doesn't work and it keeps showing "SW REV. CHECK FAIL(BOUTLORDER) DEVICE: 8. BINARY:1
My phone model is SM-G935F
My suddenly enter custom binary frp lock mode
My Samsung S7 edge model is SM-G935F. My AP SWREV shows B:8 K:6 S:7. Please, where can I download the correct firmware file that will be compatible with my phone binary?
Ksam1 said:
My suddenly enter custom binary frp lock mode
My Samsung S7 edge model is SM-G935F. My AP SWREV shows B:8 K:6 S:7. Please, where can I download the correct firmware file that will be compatible with my phone binary?
Click to expand...
Click to collapse
Hello There!
You can download your Firmware here (https://galaxyfirmware.com/model/SM-G935F/)
while finding a firmware, you will see something like this G935FXXS8ETC1, the 9th digit is the Bootloader Version or BINARY. since your binary is 8 you should find a firmware with the same Binary. I think you can choose any region right there as long as its open-line (choosing a different region from yours might end up a slow device).
Since your BINARY IS 8, you can only download a Android 8 Firmware for your S7 Edge.
Goodluck!