hi, i was using my samsung galaxy note 4 for nearly 4 years without any problems. today It went to black screen where was some info about "panic Karnel". I removed battery and everything was fine. 2 hours later when I was using snapchat phone restart and went to bootloob. I connected note 4 to odin to flash stock room and I get a massage in odin every time when I want to flash rom:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
on my phone there is massage:
"mmc_write fail"
Please help dear experts, i it any chance to fix my phone??
P.s. I tryed to use this>>> https://forum.xda-developers.com/no...te-4-pit-files-repartiton-f-g-c-t-w8-t3282641
but did not work, still get a massage:
""mmc_write fail""
x7nofate said:
hi, i was using my samsung galaxy note 4 for nearly 4 years without any problems. today It went to black screen where was some info about "panic Karnel". I removed battery and everything was fine. 2 hours later when I was using snapchat phone restart and went to bootloob. I connected note 4 to odin to flash stock room and I get a massage in odin every time when I want to flash rom:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
on my phone there is massage:
"mmc_write fail"
Please help dear experts, i it any chance to fix my phone??
Click to expand...
Click to collapse
Flash Twrp recovery via odin
In twrp Go to wipe
Wipe "system+data+cache+dalvic cache+internal storage you have to wipe 3 times or more to make sure all partations are wiped cleaned.
Then you have to download repair firmware for your specific model.
Repair firmware comes with 5 files "BL+AP+CP+CSC+PIT"
you have to extract and upload all files in odin with PIT file.
Then go to odin options and check on "nand eraseall" and "re partition"
Now boot your device into odin download mode
Now hit start and wait until finish
Then dont let phone reboot you have to boot into stock recovery and do wipe cache & factory reset then reboot.
If this method fails then there is no way to fix it unless changing logic board because your internal storage is dying thats why it shows "mmc_write fail".
You can download repair firmware from www.tsar3000.com
thank you for reply. I tryed to Flash Twrp recovery via odin but it failed. I get massage in odin:
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tryed few times and I am sure I was flashing the right recovery
I also did try to flah Repair firmware which comes with 5 files "BL+AP+CP+CSC+PIT" but it failed, I get message:
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Erase...
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
x7nofate said:
thank you for reply. I tryed to Flash Twrp recovery via odin but it failed. I get massage in odin:
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tryed few times and I am sure I was flashing the right recovery
I also did try to flah Repair firmware which comes with 5 files "BL+AP+CP+CSC+PIT" but it failed, I get message:
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Erase...
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Click to expand...
Click to collapse
Try to put your phone in freezer without battery for an hour then try this method again.
Keep trying if it doesn't work then as i told you you have to replace logic board because your internal memory is dead.
Related
Help, Phone Says " Firmare Upgrade encountered an issue, Please use Software Repair
Hey Guys,
I have no clue what happened, Phone is stuck in ODIN Mode,
I am in odin 3.09, downloaded the pit file and the latest MJE firmware and i get to this step.
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help a lost soul...
Justin
Install pit by itself. Restart in recovery and factory wipe. Then install firmware
If I helped hit thanks!!
I did the pit file, not it stays locked at Samsung Galaxy Note 3 screen.
2swizzle said:
Install pit by itself. Restart in recovery and factory wipe. Then install firmware
If I helped hit thanks!!
Click to expand...
Click to collapse
Pit File - HLTE_USA_VZW_32G.PIT
PDA - MI9/MJ7/MJE (none work)
I am running odin as an administrator. I just can't get this thing to download to the phone... am i doing something wrong..
I put the phone in download mode.
Ive Done :
Download the MJE Stock Firmware 1.3 GB and extract it once...
Download latest ODIN 3.09...
In your device go into Download mode(Vol Down+Home Button+Power Button) and again Volume Up for Download mode...
Right click ODIN and open as administrator...
Now connect your device to PC and check the status in ODIN as Connected... (COM 5)
Make sure that only Auto Reboot and F.Reset Time are checked in ODIN...
Click on AP and select the extracted file from MJE firmware...
After checking the MD5 file...Click on START and wait I get the following error
-<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_N900VVRUBMI9_N900VVZWMI9_1671014_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
is there something I am missing?
Thanks in advance!
Looks like you are trying to install I9 in your second post. Unless you were on i9 to start with you cannot downgrade. At the top of your post you refer to MJE. That is probably the reason.
Sent from my SM-N900V using Tapatalk
ive tried them all.. still no luck... verizon is sending me a new phone... it should load through odin, it doesn't nothing..
Well the issue was I was running ODIN in my VMWare Windows 7 Virtual Machine. I got my new phone today from verizon, for ****s i hooked it up to my old Windows XP machine and it went with out a hitch. I unplugged it was 75% so they can have it showing ODIN MODE..
Thanks for all the help...
I have an AT&T Samsung Galaxy s4 that I rooted on 4.3. I wanted to update and keep root, so I was going to flash a rom using safestrap. I downloaded the rom and kernel. Then I booted into download mode and it got stuck. So I took out the battery and went into recovery mode. I wiped everything and factory reset it. Now I searched up that I can use odin v3.09 to get out of the brick(only loading the logo). After I got this
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
What can I do?
bump
Firefrazed said:
I have an AT&T Samsung Galaxy s4 that I rooted on 4.3. I wanted to update and keep root, so I was going to flash a rom using safestrap. I downloaded the rom and kernel. Then I booted into download mode and it got stuck. So I took out the battery and went into recovery mode. I wiped everything and factory reset it. Now I searched up that I can use odin v3.09 to get out of the brick(only loading the logo). After I got this
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
What can I do?
Click to expand...
Click to collapse
4.3 is MK2 and it has a locked bootloader. Due to this, you cannot flash a full image containing bootloader lower than MK2 (MDB, MDL, MF3 will not work). You can flash MK2 or newer ones. Stick to MK2.
Full MK2 can be obtained from All things AT&T MK2 and NB1 thread.
Follow Deadly Venom Kitkat Magic tool and flash a pre-rooted kitkat rom from the All things AT&T thread.
Hello.
I have a problem and cant find solution.
Last night I try flash Resurrection Rom 5.3.2 on my new S4 I9505. I flash CWM , instal ROM, Gapps, Kernel and what was funny, getting reboot every couple second and touch doesnt work. After that I try restore my backup but when I do this stuck on samsung logo. Now try flash with odin new firmware I9505XXUEMK8_I9505O2UEMK1_O2U but in odin is always fail.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
(when I use PIT file)
and
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK8_I9505O2UEMK1_I9505XXUEMK8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help guys coz I need phone to work
I f****d my phone like this one time...
It is because you tried to install Android 4.3 (I know MK8 is JellyBean) when you have the phone partioned on KK.
Try to reconnect the phone and somehow install that .pit file. It is very important. You can try more of those files, I've seen 2 or 3 .pits for i9505 on XDA.
After that, do not try to install the firmware again because it won't work. Instead, download the .tar or .tar.md5 of PhilZ Recovery or TWRP. You should be able to flash them. If it succeded, now you will be able to acces the custom recovery and install a ROM again (i suggest you something closer to the stock KK to set things up, and then you can search for another Lollipop rom).
I hope it'll work!
Was trying to flash a custom ROM and Odin failed and now I can't flash the stock rom.
Issues are:
When in recovery mode I get a "No command" error and #fail to open recovery_cause(No such file or directory)
Will boot loop with the "Installing system update" screen
Odin log when flashing to stock ROM is:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img.lz4
<ID:0/005> Complete(Write) operation failed.
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin log when flashing to TWRP(3.2.1) is:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
If it matters the boxes I have checked are auto-reboot and f. reset time. I've tried on a different PC and usb ports.
Also if this is the wrong place to put the thread then can a mod move it or somebody tell me where to put it.
UPDATE:
Found a newer Odin(3.13) and got it working by ticking DeviceInfo but I'm still getting a "no command" and "fail to open recovery_cause" errors.
Odin log when it worked:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I want to fix Samsung Galaxy Note 3 which is stuck in reboot.
I used Odin3 v3.12 to flash N9000QXXUEBQA2_N9000QTUREBPL1_N9000QJVUEBPJ1_HOME.tar.md5 but failed!
LOG:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Then I used Odin3 v3.12 and N9000 by sawgent.pit to flash PIT but failed!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Mobile Model: SM-N9000Q
Can you suggest anything else? Please help!
Have you flashed firmware for your model??.
Reads as you have destroyed PIT.
Did you try using different usb cables and usb ports? Tried flashing with Odin 3.07?
JJEgan said:
Have you flashed firmware for your model??.
Reads as you have destroyed PIT.
Click to expand...
Click to collapse
I've used the firmware of the mobile's model.
I did not intentionally do anything to PIT, it be came like this when I made a recovery.
em989 said:
I've used the firmware of the mobile's model.
I did not intentionally do anything to PIT, it be came like this when I made a recovery.
Click to expand...
Click to collapse
Recovery as in restored a backup??