Hello.
I have a problem and cant find solution.
Last night I try flash Resurrection Rom 5.3.2 on my new S4 I9505. I flash CWM , instal ROM, Gapps, Kernel and what was funny, getting reboot every couple second and touch doesnt work. After that I try restore my backup but when I do this stuck on samsung logo. Now try flash with odin new firmware I9505XXUEMK8_I9505O2UEMK1_O2U but in odin is always fail.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
(when I use PIT file)
and
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK8_I9505O2UEMK1_I9505XXUEMK8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help guys coz I need phone to work
I f****d my phone like this one time...
It is because you tried to install Android 4.3 (I know MK8 is JellyBean) when you have the phone partioned on KK.
Try to reconnect the phone and somehow install that .pit file. It is very important. You can try more of those files, I've seen 2 or 3 .pits for i9505 on XDA.
After that, do not try to install the firmware again because it won't work. Instead, download the .tar or .tar.md5 of PhilZ Recovery or TWRP. You should be able to flash them. If it succeded, now you will be able to acces the custom recovery and install a ROM again (i suggest you something closer to the stock KK to set things up, and then you can search for another Lollipop rom).
I hope it'll work!
Related
Help, Phone Says " Firmare Upgrade encountered an issue, Please use Software Repair
Hey Guys,
I have no clue what happened, Phone is stuck in ODIN Mode,
I am in odin 3.09, downloaded the pit file and the latest MJE firmware and i get to this step.
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help a lost soul...
Justin
Install pit by itself. Restart in recovery and factory wipe. Then install firmware
If I helped hit thanks!!
I did the pit file, not it stays locked at Samsung Galaxy Note 3 screen.
2swizzle said:
Install pit by itself. Restart in recovery and factory wipe. Then install firmware
If I helped hit thanks!!
Click to expand...
Click to collapse
Pit File - HLTE_USA_VZW_32G.PIT
PDA - MI9/MJ7/MJE (none work)
I am running odin as an administrator. I just can't get this thing to download to the phone... am i doing something wrong..
I put the phone in download mode.
Ive Done :
Download the MJE Stock Firmware 1.3 GB and extract it once...
Download latest ODIN 3.09...
In your device go into Download mode(Vol Down+Home Button+Power Button) and again Volume Up for Download mode...
Right click ODIN and open as administrator...
Now connect your device to PC and check the status in ODIN as Connected... (COM 5)
Make sure that only Auto Reboot and F.Reset Time are checked in ODIN...
Click on AP and select the extracted file from MJE firmware...
After checking the MD5 file...Click on START and wait I get the following error
-<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_N900VVRUBMI9_N900VVZWMI9_1671014_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
is there something I am missing?
Thanks in advance!
Looks like you are trying to install I9 in your second post. Unless you were on i9 to start with you cannot downgrade. At the top of your post you refer to MJE. That is probably the reason.
Sent from my SM-N900V using Tapatalk
ive tried them all.. still no luck... verizon is sending me a new phone... it should load through odin, it doesn't nothing..
Well the issue was I was running ODIN in my VMWare Windows 7 Virtual Machine. I got my new phone today from verizon, for ****s i hooked it up to my old Windows XP machine and it went with out a hitch. I unplugged it was 75% so they can have it showing ODIN MODE..
Thanks for all the help...
So I tried rooting my girlfriends VZW S4. I got booted into Safestrap recovery and tried installing a custom ROM... every rom I had failed. So I just wiped the cache, still didn't work. Now I reboot the phone and im stuck at the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Odin will NOT WORK with ANY build I try to flash it. I get that god damn Fail (Auth!) error EVERY TIME.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUEMK2_I545VZWEMK2_I545VRUEMK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Someone help
says SW REV. CHECK FAIL : fused : 6 , binary : 5 on the phone after odin fails.
Tried a bunch of things, nothing yet.
EDIT:
http://galaxys4root.com/galaxy-s4-stock-firmware/
found a stock one that is actually working.... so far so good
The reason why it doesn't work is because you are flashing old firmwares. You can't flash 4.2.2 and 4.3 once you are on 4.4.2. You can only flash 4.4.2.
Lennyz1988 said:
The reason why it doesn't work is because you are flashing old firmwares. You can't flash 4.2.2 and 4.3 once you are on 4.4.2. You can only flash 4.4.2.
Click to expand...
Click to collapse
Now that I am on 4.4.2, is this phone stuck with that? I managed to get safestrap on it, but I still cannot install any custom ROMs on it. Tried partitioning a new piece and installing cyanogen on there, no luck, just bootloops... this is a headache!
ThoR294 said:
Now that I am on 4.4.2, is this phone stuck with that? I managed to get safestrap on it, but I still cannot install any custom ROMs on it. Tried partitioning a new piece and installing cyanogen on there, no luck, just bootloops... this is a headache!
Click to expand...
Click to collapse
No, this is the result of "play" with a SAMSUNG device :highfive:
My s3 took 5 min to install cyanogen lol. Womp womp
ThoR294 said:
My s3 took 5 min to install cyanogen lol. Womp womp
Click to expand...
Click to collapse
Yes but my guess is your s3 isn't a Verizon version.
ps I don't think CM works on your version. I think you can only flash custom roms that match your kernel.
Hello guys... I have been at this for a few hours now. I own a Note 4 N910H. I had upgraded OTA to lollipop last month. I was reading some reviews on lollipop because I was experiencing a lot of bugs with the OS. A lot of people were having the same issues as me. So I decided to go back to kitkat. This is where my problem happens. I accidentely soft bricked my device.
Everything I've done:
Downloaded kitkat and tried to install via odin. (Didn't check developer settings prior, not sure if this was the problem)
Device soft bricked
Turned on my device and saw this message "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
Tried to access Kies, it said my device wasn't supported.
I googled around and saw an article saying I have to go back to lollipop.
I downloaded lollipop and tried to install via odin. It failed again with the same error when I turn on my device.
All help will be greatly appreciated. I really hope I don't have to send my phone back. I don't have a backup lol.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910HXXU1BOC5_N910HOXE1BOC5_N910HXXU1BOC5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
drew92c said:
Hello guys... I have been at this for a few hours now. I own a Note 4 N910H. I had upgraded OTA to lollipop last month. I was reading some reviews on lollipop because I was experiencing a lot of bugs with the OS. A lot of people were having the same issues as me. So I decided to go back to kitkat. This is where my problem happens. I accidentely soft bricked my device.
Everything I've done:
Downloaded kitkat and tried to install via odin. (Didn't check developer settings prior, not sure if this was the problem)
Device soft bricked
Turned on my device and saw this message "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
Tried to access Kies, it said my device wasn't supported.
I googled around and saw an article saying I have to go back to lollipop.
I downloaded lollipop and tried to install via odin. It failed again with the same error when I turn on my device.
All help will be greatly appreciated. I really hope I don't have to send my phone back. I don't have a backup lol.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910HXXU1BOC5_N910HOXE1BOC5_N910HXXU1BOC5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Just flash a custom recovery via odin and reboot and you are good to go
Abdl said:
Just flash a custom recovery via odin and reboot and you are good to go
Click to expand...
Click to collapse
Would that root my device? I don't want to void my warranty. If it doesn't void it, how do I go about doing those steps? This whole thing is driven me nuts.
Edit: THANK YOU!!! All is good now!
Use a pit file for it. Because your hidden partition fails. Or you can Flash your latest rom with no error. I think you re trying another rom from your latest.
hello
i have been flashing roms for ages now and really never had such a problem like this before , i am on sweet rom , model number N910U ( new zealand ) , i need to go back to stock rom cause there to been a hardware problem with the camera, thought i better get back to stock before i take it in .
i have unsuccessfully trying to unroot via odin ( Odin3 v3.09) tried using this firmware "BRI-N910UXXU1BOGB-20150731100307" and even had worse luck with this one " CTI-N910UXXU1BOE1-20150721100509" (fails in a few seconds)
seems to have failed just before it gets to hidden.img
heres the log :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910UXXU1BOGB_N910UZZT1BOGB_N910UXXU1BOGB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hello,
I have the same problem on the S5+ and for the moment i don't find solution for this problem. I think CSC is causing this error and my advice is to install samsung phone info to find CSC and download right firmware for your phone. After that you can try to reinstall with Odin the firmware .
Sent from my SM-G901F using Tapatalk 2
So I've installed a custom ROM on this phone about 2 years ago. It's my girlfriends phone.
Every once in a while when she turns her phone on it would go into a boot loop several times, and eventually go into the system and function normally. It was very intermittent, but it wasn't a big deal. Yesterday the phone was stuck in a permanent boot loop. What was interesting is that i could not enter into a Recovery Mode, just download mode.
So i figured it was time to just simply flash the original stock ROM.
ODIN 3.12.7
ROM: FMC-G900W8VLS1DPF3-20160725152930 (Canadian Koodo Android 6.0.1)
Flash was completely successful (I've flashed and unbricked many phones so I am very familiar with the process). This is the ODIN log file
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> cache.img.ext4
<ID:0/004> modem.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Phone restarts with blue Recovery Booting message and is stuck in a boot loop again. Boot loop is always trying to go Into Recovery Mode (just like previously before flash). I know that flash was successful because I no longer have the yellow Warranty Bit message i did when custom ROM was installed, So then i figured maybe i need the PIT file. I found a pit file SM-G900W8_pit_16GB.
I've then re-flashed again with this PIT file (Auto-reboot, re-partition, and F. Reset Time checked) and got an error message
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't know what else to do. The phone has been dropped quite a few times which is obvious by its appearance. Does anybody have any suggestions?
srdjmor said:
So I've installed a custom ROM on this phone about 2 years ago. It's my girlfriends phone...
Click to expand...
Click to collapse
I don't have this specific device but, your best bet is to post this question within the following Discussion thread for your specific device.
https://forum.xda-developers.com/showthread.php?t=3228804
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE