I have an AT&T Samsung Galaxy s4 that I rooted on 4.3. I wanted to update and keep root, so I was going to flash a rom using safestrap. I downloaded the rom and kernel. Then I booted into download mode and it got stuck. So I took out the battery and went into recovery mode. I wiped everything and factory reset it. Now I searched up that I can use odin v3.09 to get out of the brick(only loading the logo). After I got this
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
What can I do?
bump
Firefrazed said:
I have an AT&T Samsung Galaxy s4 that I rooted on 4.3. I wanted to update and keep root, so I was going to flash a rom using safestrap. I downloaded the rom and kernel. Then I booted into download mode and it got stuck. So I took out the battery and went into recovery mode. I wiped everything and factory reset it. Now I searched up that I can use odin v3.09 to get out of the brick(only loading the logo). After I got this
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
What can I do?
Click to expand...
Click to collapse
4.3 is MK2 and it has a locked bootloader. Due to this, you cannot flash a full image containing bootloader lower than MK2 (MDB, MDL, MF3 will not work). You can flash MK2 or newer ones. Stick to MK2.
Full MK2 can be obtained from All things AT&T MK2 and NB1 thread.
Follow Deadly Venom Kitkat Magic tool and flash a pre-rooted kitkat rom from the All things AT&T thread.
Related
So I tried rooting my girlfriends VZW S4. I got booted into Safestrap recovery and tried installing a custom ROM... every rom I had failed. So I just wiped the cache, still didn't work. Now I reboot the phone and im stuck at the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Odin will NOT WORK with ANY build I try to flash it. I get that god damn Fail (Auth!) error EVERY TIME.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUEMK2_I545VZWEMK2_I545VRUEMK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Someone help
says SW REV. CHECK FAIL : fused : 6 , binary : 5 on the phone after odin fails.
Tried a bunch of things, nothing yet.
EDIT:
http://galaxys4root.com/galaxy-s4-stock-firmware/
found a stock one that is actually working.... so far so good
The reason why it doesn't work is because you are flashing old firmwares. You can't flash 4.2.2 and 4.3 once you are on 4.4.2. You can only flash 4.4.2.
Lennyz1988 said:
The reason why it doesn't work is because you are flashing old firmwares. You can't flash 4.2.2 and 4.3 once you are on 4.4.2. You can only flash 4.4.2.
Click to expand...
Click to collapse
Now that I am on 4.4.2, is this phone stuck with that? I managed to get safestrap on it, but I still cannot install any custom ROMs on it. Tried partitioning a new piece and installing cyanogen on there, no luck, just bootloops... this is a headache!
ThoR294 said:
Now that I am on 4.4.2, is this phone stuck with that? I managed to get safestrap on it, but I still cannot install any custom ROMs on it. Tried partitioning a new piece and installing cyanogen on there, no luck, just bootloops... this is a headache!
Click to expand...
Click to collapse
No, this is the result of "play" with a SAMSUNG device :highfive:
My s3 took 5 min to install cyanogen lol. Womp womp
ThoR294 said:
My s3 took 5 min to install cyanogen lol. Womp womp
Click to expand...
Click to collapse
Yes but my guess is your s3 isn't a Verizon version.
ps I don't think CM works on your version. I think you can only flash custom roms that match your kernel.
hi everyone i'm new to this forum so bare with me please.
i recently bought a galaxy note 4 sm-910F and it was rooted, i wanted to get rid of the root in order to get the updates for android (because the phone is running kit kat) but i couldn't after doing some research i found that i have to flash the stock firmware of lollipop for my model using Odin. i checked the usb debugging and followed the instructions but when i press start in oddin here's what comes :
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help me i want to get rid of this root . thank you very much in advance
Try kies Samsung
I have a Tab S2 SM-T813 that Im trying to reset it keeps giving me an error.
I tried the original cable and many different cables still gives an error
please help!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> __XmitData_Write
<ID:0/004> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
wickedblue2007 said:
I have a Tab S2 SM-T813 that Im trying to reset it keeps giving me an error.
I tried the original cable and many different cables still gives an error
please help!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> __XmitData_Write
<ID:0/004> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
That error is almost always a bad cable or one that is too long or a bad port.
It might also be worth redownloading the firmware.
If you still have issues then I suggest rooting and using Flashfire to install the firmware.
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1210)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbnmz
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)can not
help me please my friend.what is it.why i can not install android 5 stock room
help me please
neu
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
qwellen said:
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1210)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbnmz
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)can not
help me please my friend.what is it.why i can not install android 5 stock room
help me please
neu
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Which android you was running before flashing?
I don't know
qwellen said:
I don't know
Click to expand...
Click to collapse
You can flash android 5.1.1 .but you cannot flash android 5.0 it will fail because once you are on 5.1.1 or 6.0.1 you cannot downgrade to 5.0 or 4.4.4 samsung has locked down bootloader to prevent downgrading.
Trex888 said:
You can flash android 5.1.1 .but you cannot flash android 5.0 it will fail because once you are on 5.1.1 or 6.0.1 you cannot downgrade to 5.0 or 4.4.4 samsung has locked down bootloader to prevent downgrading.
Click to expand...
Click to collapse
i"ve tried Lollipop 5.0.1 , Android 5.1.1 ,Marshmallow 6.0.1 fail all of this roms are stock rom for smn910f.
before flashing i was running andrid 6.0.1 . can i install android 5.1.1
in recovery mode write n910g on note 4.
back of note 4 write ist sm n910f.
edit :i found problem- my note 4 is not n910f . its sm n910g thanks.
hi, i was using my samsung galaxy note 4 for nearly 4 years without any problems. today It went to black screen where was some info about "panic Karnel". I removed battery and everything was fine. 2 hours later when I was using snapchat phone restart and went to bootloob. I connected note 4 to odin to flash stock room and I get a massage in odin every time when I want to flash rom:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
on my phone there is massage:
"mmc_write fail"
Please help dear experts, i it any chance to fix my phone??
P.s. I tryed to use this>>> https://forum.xda-developers.com/no...te-4-pit-files-repartiton-f-g-c-t-w8-t3282641
but did not work, still get a massage:
""mmc_write fail""
x7nofate said:
hi, i was using my samsung galaxy note 4 for nearly 4 years without any problems. today It went to black screen where was some info about "panic Karnel". I removed battery and everything was fine. 2 hours later when I was using snapchat phone restart and went to bootloob. I connected note 4 to odin to flash stock room and I get a massage in odin every time when I want to flash rom:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
on my phone there is massage:
"mmc_write fail"
Please help dear experts, i it any chance to fix my phone??
Click to expand...
Click to collapse
Flash Twrp recovery via odin
In twrp Go to wipe
Wipe "system+data+cache+dalvic cache+internal storage you have to wipe 3 times or more to make sure all partations are wiped cleaned.
Then you have to download repair firmware for your specific model.
Repair firmware comes with 5 files "BL+AP+CP+CSC+PIT"
you have to extract and upload all files in odin with PIT file.
Then go to odin options and check on "nand eraseall" and "re partition"
Now boot your device into odin download mode
Now hit start and wait until finish
Then dont let phone reboot you have to boot into stock recovery and do wipe cache & factory reset then reboot.
If this method fails then there is no way to fix it unless changing logic board because your internal storage is dying thats why it shows "mmc_write fail".
You can download repair firmware from www.tsar3000.com
thank you for reply. I tryed to Flash Twrp recovery via odin but it failed. I get massage in odin:
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tryed few times and I am sure I was flashing the right recovery
I also did try to flah Repair firmware which comes with 5 files "BL+AP+CP+CSC+PIT" but it failed, I get message:
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Erase...
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
x7nofate said:
thank you for reply. I tryed to Flash Twrp recovery via odin but it failed. I get massage in odin:
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tryed few times and I am sure I was flashing the right recovery
I also did try to flah Repair firmware which comes with 5 files "BL+AP+CP+CSC+PIT" but it failed, I get message:
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Erase...
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Click to expand...
Click to collapse
Try to put your phone in freezer without battery for an hour then try this method again.
Keep trying if it doesn't work then as i told you you have to replace logic board because your internal memory is dead.