<ID:0/005> aboot.mbn <ID:0/005> FAIL! (Auth) - Galaxy Note 4 Q&A, Help & Troubleshooting

<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1210)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbnmz
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)can not
help me please my friend.what is it.why i can not install android 5 stock room
help me please
neu
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

qwellen said:
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1210)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbnmz
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)can not
help me please my friend.what is it.why i can not install android 5 stock room
help me please
neu
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Which android you was running before flashing?

I don't know

qwellen said:
I don't know
Click to expand...
Click to collapse
You can flash android 5.1.1 .but you cannot flash android 5.0 it will fail because once you are on 5.1.1 or 6.0.1 you cannot downgrade to 5.0 or 4.4.4 samsung has locked down bootloader to prevent downgrading.

Trex888 said:
You can flash android 5.1.1 .but you cannot flash android 5.0 it will fail because once you are on 5.1.1 or 6.0.1 you cannot downgrade to 5.0 or 4.4.4 samsung has locked down bootloader to prevent downgrading.
Click to expand...
Click to collapse
i"ve tried Lollipop 5.0.1 , Android 5.1.1 ,Marshmallow 6.0.1 fail all of this roms are stock rom for smn910f.
before flashing i was running andrid 6.0.1 . can i install android 5.1.1
in recovery mode write n910g on note 4.
back of note 4 write ist sm n910f.
edit :i found problem- my note 4 is not n910f . its sm n910g thanks.

Related

Can't reflash Stock firmware

I've been using cyanogenmod for a while but after updating it to android 4.3 i had some problems so i decided to move back to stock.
Now when i try to install the stock firmware through odin i get this.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK8_I9505OXXEMK3_I9505XXUEMK8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
i would really love some help
I've tried another usb port and it worked.. i guess i`m retarded

I337 hang on samsung LOGO

i receive it form customer hanfg on samsung logo , he say he try by odian to upload some file !!!
so i flash it all time error , but just succed on 4.4.2 after flash phone hang on samsung logo
and i can't enter to wipe device or to install stuck rom with sd card ,when i try i get on menu this photo
(recovery is not seandroid enforcing)
hitibiti said:
i receive it form customer hanfg on samsung logo , he say he try by odian to upload some file !!!
so i flash it all time error , but just succed on 4.4.2 after flash phone hang on samsung logo
and i can't enter to wipe device or to install stuck rom with sd card ,when i try i get on menu this photo
(recovery is not seandroid enforcing)
Click to expand...
Click to collapse
Hi,
It seems like you have a soft brick follow this guide
http://forum.xda-developers.com/showthread.php?t=2265477
Make sure you use the right PIT and the right stock rom for your phone
MAX 404 said:
Hi,
It seems like you have a soft brick follow this guide
http://forum.xda-developers.com/showthread.php?t=2265477
Make sure you use the right PIT and the right stock rom for your phone
Click to expand...
Click to collapse
thx for answer
i try still same problem , but itès strange i canèt wite any forware om it he just accept
I337MVLUFNE1_I337MOYAFNE2_I337MVLUFNE1_HOME.tar (4.4.2)
even other 4.4.2 from other provider can't accept it
also try 4.3 !!!!
any other suggestion ?
You need to give us more details. Post the Odin log here.
hitibiti said:
thx for answer
i try still same problem , but itès strange i canèt wite any forware om it he just accept
I337MVLUFNE1_I337MOYAFNE2_I337MVLUFNE1_HOME.tar (4.4.2)
even other 4.4.2 from other provider can't accept it
also try 4.3 !!!!
any other suggestion ?
Click to expand...
Click to collapse
Lennyz1988 said:
You need to give us more details. Post the Odin log here.
Click to expand...
Click to collapse
Hi
As Lennyz1988 said more detail , post log.......
flashed ok still same problem with this version ; I337MVLUFNE1_I337MOYAFNE2_I337MVLUFNE1_HOME.tar
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUFNE1_I337MOYAFNE2_I337MVLUFNE1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> modem.bin
<ID:0/005> NON-HLOS.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
Click to expand...
Click to collapse
now i try this version with pit file
I337_16GB.pit
I337MVLUEMK6_I337MOYAEMK6_I337MVLUEMK6_HOME.tar
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUEMK6_I337MOYAEMK6_I337MVLUEMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> NON-HLOS.bin
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
now i try with
I337_16GB.pit
AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> persdata.img.ext4
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Click to expand...
Click to collapse

S4 can't flash back to NB1 from botched OC3 install.

Hi, I followed the instructions from this link to upgrade my NC1 phone to OC3, and it worked fine, until I flashed another ROM: http://forum.xda-developers.com/gal...llipop-rom-t3135396/post61352064#post61352064.
I flashed this ROM: http://forum.xda-developers.com/galaxy-s4/i9505-develop/rom-albe95-lollirom-official-1-0-t3049564, and was stuck in the startup sequence for like 10 minutes, so I went back to odin to see if I could flash back to NB1, and I get failed, saying:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUFNB1_TWRootable_Full_Odin.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> persdata.img.ext4
<ID:0/004> system.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
And when I try to turn on my phone from then, it says that it failed a Kies update. I've tried different USB ports and different cables, but I get the same result. How do I fix this? I cannot afford to get a new phone.
Edit; I tried a USB port in the back of my computer and it worked from there!

Help me SM-G900V upgrading via Odin to 6.0

Error after upgrading via Odin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900VVRU2DPF4_G900VVZW2DPF4_G900VVRU2DPF4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
in the phone show secure check fail : system, i tried verizon sofware recovery, same error

Flash into stock rom on Galaxy S8 (SM-G95OU1)

Was trying to flash a custom ROM and Odin failed and now I can't flash the stock rom.
Issues are:
When in recovery mode I get a "No command" error and #fail to open recovery_cause(No such file or directory)
Will boot loop with the "Installing system update" screen
Odin log when flashing to stock ROM is:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img.lz4
<ID:0/005> Complete(Write) operation failed.
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin log when flashing to TWRP(3.2.1) is:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
If it matters the boxes I have checked are auto-reboot and f. reset time. I've tried on a different PC and usb ports.
Also if this is the wrong place to put the thread then can a mod move it or somebody tell me where to put it.
UPDATE:
Found a newer Odin(3.13) and got it working by ticking DeviceInfo but I'm still getting a "no command" and "fail to open recovery_cause" errors.
Odin log when it worked:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

Categories

Resources