I want to fix Samsung Galaxy Note 3 which is stuck in reboot.
I used Odin3 v3.12 to flash N9000QXXUEBQA2_N9000QTUREBPL1_N9000QJVUEBPJ1_HOME.tar.md5 but failed!
LOG:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Then I used Odin3 v3.12 and N9000 by sawgent.pit to flash PIT but failed!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Mobile Model: SM-N9000Q
Can you suggest anything else? Please help!
Have you flashed firmware for your model??.
Reads as you have destroyed PIT.
Did you try using different usb cables and usb ports? Tried flashing with Odin 3.07?
JJEgan said:
Have you flashed firmware for your model??.
Reads as you have destroyed PIT.
Click to expand...
Click to collapse
I've used the firmware of the mobile's model.
I did not intentionally do anything to PIT, it be came like this when I made a recovery.
em989 said:
I've used the firmware of the mobile's model.
I did not intentionally do anything to PIT, it be came like this when I made a recovery.
Click to expand...
Click to collapse
Recovery as in restored a backup??
Related
Hello my friends, how are you all
I present to you a simple explanation to you suffers from spam in odin
For example:
Code:
complete write operation failed
Odin flash fail
<ID:0/025> Initialzation..
<ID:0/025> Get PIT for mapping..
<ID:0/025> Firmware update start..
<ID:0/025> system.img
<ID:0/025> NAND Write Start!!
<ID:0/025>
<ID:0/025> Complete(Write) operation failed.
<ID:0/025> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
The simple solution is to follow the following steps:
1-The installation program Odin3 v3.07
2-Enter the download status And connect the phone to the computer
Then open the program Odin
3-We download the file PIT
4-And sail on this phone to correct some errors and keep in the PIT box in Odin
5-We work to Wipe factory
6-We install from four files
I9500XXUAMDE_I9500ODDAMDC_INU.zip
7-After we wipe factory And restart the phone.:good:
And here we have the explanation and I hope I succeeded the explanation Greetings everyone
Thank you friend, looks very useful!
tamirda said:
Thank you friend, looks very useful!
Click to expand...
Click to collapse
Thank you my friend tamirda
Sent from my GT-I9500 using xda app-developers app
Why are you messing around with the PIT file?
This is the easiest way to brick your phone if the pit file you use is corrupt or not for your phone. And I'm not talking about soft brick thats recoverable... You will have a brand new $600+ paperweight...
All you need to flash is the rom file (must be either .tar or .tar.md5) in PDA, make sure repartition isn't ticked and flash...
Also make sure KIES is NOT RUNNING...
If you have the new firmware, MH8, then this definately WON'T work...
I have the same problem but the solution does not work
I try to install this rum brought here and what I get this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUAMDE_I9500ODDAMDC_I9500DDUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
GT-I9500
S4
Anyone know what can be done
The device enters only state DOWNLOAD not RECOVERY
yony100200 said:
I try to install this rum brought here and what I get this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUAMDE_I9500ODDAMDC_I9500DDUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
GT-I9500
S4
Anyone know what can be done
The device enters only state DOWNLOAD not RECOVERY
Click to expand...
Click to collapse
simply go to http://www.sammobile.com/firmwares/2/
download your latest firmware and flash via odin
1. do no check RE-PARTITION option..leave it with auto-reboot and F.reset time (DEFAULT option)
2. flash only PDA file or single file downloaded from sammobile
Help, Phone Says " Firmare Upgrade encountered an issue, Please use Software Repair
Hey Guys,
I have no clue what happened, Phone is stuck in ODIN Mode,
I am in odin 3.09, downloaded the pit file and the latest MJE firmware and i get to this step.
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help a lost soul...
Justin
Install pit by itself. Restart in recovery and factory wipe. Then install firmware
If I helped hit thanks!!
I did the pit file, not it stays locked at Samsung Galaxy Note 3 screen.
2swizzle said:
Install pit by itself. Restart in recovery and factory wipe. Then install firmware
If I helped hit thanks!!
Click to expand...
Click to collapse
Pit File - HLTE_USA_VZW_32G.PIT
PDA - MI9/MJ7/MJE (none work)
I am running odin as an administrator. I just can't get this thing to download to the phone... am i doing something wrong..
I put the phone in download mode.
Ive Done :
Download the MJE Stock Firmware 1.3 GB and extract it once...
Download latest ODIN 3.09...
In your device go into Download mode(Vol Down+Home Button+Power Button) and again Volume Up for Download mode...
Right click ODIN and open as administrator...
Now connect your device to PC and check the status in ODIN as Connected... (COM 5)
Make sure that only Auto Reboot and F.Reset Time are checked in ODIN...
Click on AP and select the extracted file from MJE firmware...
After checking the MD5 file...Click on START and wait I get the following error
-<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_N900VVRUBMI9_N900VVZWMI9_1671014_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
is there something I am missing?
Thanks in advance!
Looks like you are trying to install I9 in your second post. Unless you were on i9 to start with you cannot downgrade. At the top of your post you refer to MJE. That is probably the reason.
Sent from my SM-N900V using Tapatalk
ive tried them all.. still no luck... verizon is sending me a new phone... it should load through odin, it doesn't nothing..
Well the issue was I was running ODIN in my VMWare Windows 7 Virtual Machine. I got my new phone today from verizon, for ****s i hooked it up to my old Windows XP machine and it went with out a hitch. I unplugged it was 75% so they can have it showing ODIN MODE..
Thanks for all the help...
Hello.
I have a problem and cant find solution.
Last night I try flash Resurrection Rom 5.3.2 on my new S4 I9505. I flash CWM , instal ROM, Gapps, Kernel and what was funny, getting reboot every couple second and touch doesnt work. After that I try restore my backup but when I do this stuck on samsung logo. Now try flash with odin new firmware I9505XXUEMK8_I9505O2UEMK1_O2U but in odin is always fail.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
(when I use PIT file)
and
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK8_I9505O2UEMK1_I9505XXUEMK8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help guys coz I need phone to work
I f****d my phone like this one time...
It is because you tried to install Android 4.3 (I know MK8 is JellyBean) when you have the phone partioned on KK.
Try to reconnect the phone and somehow install that .pit file. It is very important. You can try more of those files, I've seen 2 or 3 .pits for i9505 on XDA.
After that, do not try to install the firmware again because it won't work. Instead, download the .tar or .tar.md5 of PhilZ Recovery or TWRP. You should be able to flash them. If it succeded, now you will be able to acces the custom recovery and install a ROM again (i suggest you something closer to the stock KK to set things up, and then you can search for another Lollipop rom).
I hope it'll work!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_G900VVRU1ANCG_G900VVZW1ANCG_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
All flashes fail. Full Tar,Firmware,Kernel, etc...
Just want phone to work again rooted or not, kitkat, lollipop, whatever...
Plz Help =)
beagler89 said:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_G900VVRU1ANCG_G900VVZW1ANCG_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
All flashes fail. Full Tar,Firmware,Kernel, etc...
Just want phone to work again rooted or not, kitkat, lollipop, whatever...
Plz Help =)
Click to expand...
Click to collapse
What happened to cause you the need to odin to NCG?
Are you using the original data cable? Try a different USB port. Try a different version of odin.
Tulsadiver said:
What happened to cause you the need to odin to NCG?
Are you using the original data cable? Try a different USB port. Try a different version of odin.
Click to expand...
Click to collapse
Yes original cable
Tried to revert back to kitkat, it passed. Now it goes to Samsung Splash Screen then reboots to recovery.
All flashes end the same way, from any version. Have factory reset and everything else.
Nothing will pass.
What is/was the FW you were on before using Odin?
Dudash said:
What is/was the FW you were on before using Odin?
Click to expand...
Click to collapse
OC4
beagler89 said:
OC4
Click to expand...
Click to collapse
Download and flash the OC4 .tar from sammobile.
hello
i have been flashing roms for ages now and really never had such a problem like this before , i am on sweet rom , model number N910U ( new zealand ) , i need to go back to stock rom cause there to been a hardware problem with the camera, thought i better get back to stock before i take it in .
i have unsuccessfully trying to unroot via odin ( Odin3 v3.09) tried using this firmware "BRI-N910UXXU1BOGB-20150731100307" and even had worse luck with this one " CTI-N910UXXU1BOE1-20150721100509" (fails in a few seconds)
seems to have failed just before it gets to hidden.img
heres the log :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910UXXU1BOGB_N910UZZT1BOGB_N910UXXU1BOGB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hello,
I have the same problem on the S5+ and for the moment i don't find solution for this problem. I think CSC is causing this error and my advice is to install samsung phone info to find CSC and download right firmware for your phone. After that you can try to reinstall with Odin the firmware .
Sent from my SM-G901F using Tapatalk 2