In the Official Firmware of Galaxy J5 2016 the following files are seen:
abbot.mbn
sbl1.mbn
rpm.mbn
tz.mbn
hyp.mbn
NON-HLOS.bin
sec.dat
boot.img
recovery.img
system.img.ext4
modem.bin
cache.img.ext4
hidden.img.ext4
I want to make a 4-file ROM for j5 2016. So I should know in the above list which files relate to Boot(loader), which files relate to PDA, which files relate to CSC, and which files relate to Modem.
Can anyone guide me?
Related
I have a S4 LTE and I've been looking for the aboot.mbn in the I9505XXUEMJ5_I9505OLBEMJ5_XME firmware but can't find it. Is there any other name it could be under?
SOFT BRICK - Fail flashing Stock ROM at hidden.img ODIN
Guys hello.
I have rooted and successfully flashed custom recovery and custom firmwares on my Note 3 (9005 Qualcomm LTE), however the last flash (stock ROM 4.4.2 N9005XXUENB4) attempt with Odin (v 3) failed at the end of the flash process ( hidden.img.ext4 -> FAIL! (ext4)):
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now the phone wouldn't boot any more....
Than I try the pit file ........sorry the some situation......................................
Can somebody help or advise me?:crying::crying:
Cheers Shark001
This is possible coz the firmware you have installed (maybe you upgrade your bootloader flashing that custom roms) is newer that the one you are trying to flash.
Joku1981 said:
This is possible coz the firmware you have installed (maybe you upgrade your bootloader) is newer that the one you are trying to flash.
Click to expand...
Click to collapse
Thank you for your quick answer.......
I had this ROM [SM-N9005][XXUGNI4]_BoBCaTROM_EVO_v12 multi density........
Is there a way how I can solve it?
Shark001 said:
Thank you for your quick answer.......
I had this ROM [SM-N9005][XXUGNI4]_BoBCaTROM_EVO_v12 multi density........
Is there a way how I can solve it?
Click to expand...
Click to collapse
Ni4 is much newer....so flash a Ni4 room. ...
Shark001 said:
Thank you for your quick answer.......
I had this ROM [SM-N9005][XXUGNI4]_BoBCaTROM_EVO_v12 multi density........
Is there a way how I can solve it?
Click to expand...
Click to collapse
Are you using a branded device? Where is your device from? Do you know the CSC of your device?
Go to Sammobile.com and take a look the firmwares GNI4. Download and flash it. Done.
HI
My Phone was brandet by T-Mobile (Note3 is rooted) but I used a custom Rom the BobCat Rom and the reported Error happend during the tryed to reinstall the xxxGNI4 version from Sammobile.
Therefore I'm confused . Sorry I wrote the wrong version in my first post....
Shark001 said:
HI
My Phone was brandet by T-Mobile (Note3 is rooted) but I used a custom Rom the BobCat Rom and the reported Error happend during the tryed to reinstall the xxxGNI4 version from Sammobile.
Therefore I'm confused . Sorry I wrote the wrong version in my first post....
Click to expand...
Click to collapse
I found the CSC Version of the BObCatROm ............it is N9005AXXGNJ1
Cheers
Shark001 said:
I found the CSC Version of the BObCatROm ............it is N9005AXXGNJ1
Cheers
Click to expand...
Click to collapse
T-mobile of what country?
Ok, so I was running TWRP 2.8.5.0-trltedt and CM12 with its own kernel. N910G.
If I go to TWRP and install a custom Sh1twiz ROM via ZIP + nadia kernel it's fine and it works.
If I go to TWRP and wipe System, Dalvik and Internal Storage and then go into Download Mode and use Odin 3.10 to install an official ROM (N910GDTU1ANK3_N910GOLB1ANK3_N910GDTU1ANK3_HOME.tar.md5) from Sammobile then I get a:
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Ext4)
The phone screen says:
Volume size is too big 92160 < 204800
ODIN: Invalid ext4 image
At this point if I restart the phone and try to enter TWRP (recovery) it doesn't work anymore, it goes into another screen that says:
"Firmware upgrade encountered an issue" etc.
If I go again into download mode and flash TWRP with Odin the flashing works.
Then, if I try to enter recovery it says something... I cant read it cause it happens too fast, but it's something related to "formatting", "cache", "wipe".
Then the phone restarts by itself and the phone seems to work.
However, if I go again in download mode and try to flash the original firmware with Odin, I get the same FAIL! (Ext4)... so this means the core problem was not fixed by TWRP.
I heard I may need to flash a PIT file with re-partition clicked?
But where do I find the right PIT file for N910G?
The thing is that even if the phone seems to work I am afraid that later I might find out that it doesnt work properly... after spending hours installing everything on it...
Hey guys. I tried to install the N910CXXU1BOC5 firmware on my Note 4 and this is what I get in Odin :
...
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
For the first time ever I can't flash with odin. What should I do ? I tried both 3.04 and 3.10.6 versions of Odin and both return "FAIL" as result and now I can't use my phone. Please help
GeorgEveS said:
Hey guys. I tried to install the N910CXXU1BOC5 firmware on my Note 4 and this is what I get in Odin :
...
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
For the first time ever I can't flash with odin. What should I do ? I tried both 3.04 and 3.10.6 versions of Odin and both return "FAIL" as result and now I can't use my phone. Please help
Click to expand...
Click to collapse
make sure you follow all the steps, remember you have to unzip the file you downloaded then you will be able to flash it via Odin, remember to click on PDA, and Re Partition have to be disabled, only Auto Reboot and F.Reset Time should be checked, good luck, cheers:fingers-crossed:
make sure reactivation lock is uncheck at security settings...
Need pit file to flash stock with heimdall. or JOdin3. The only one online "J5LTE_EUR_OPEN.pit" isn't working. I have "repartitioned" and lost my original.
pit file here
https://forum.xda-developers.com/galaxy-j5/help/bricked-samsung-galaxy-j5-j500f-t3769340
heimdall cli flash j5 2015 j500f stock 5.1.1
sudo heimdall flash --CACHE cache.img.ext4 --HIDDEN hidden.img.ext4 --ABOOT aboot.mbn --RPM rpm.mbn --QSEE tz.mbn --QHEE hyp.mbn --SBL1 sbl1.mbn --SYSTEM system.img.ext4 --BOOT boot.img --pit PIT-SM-J500F-12-09-2016_11-32-53.pit --no-reboot