Hey, i tried to downgrade from G950FXXU2CRED (latest oreo build) to nougat with odin but it shows this:
"<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5617 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
Is this the new bootloader stuff problem? Can't i downgrade to nougat?
I think because the latest OREO is bootloader V2 and you can't downgrade to V1.
cannot downgrade to nougat..you must install xxu2 only version
Does any nougat firmware have bootloader v2?
otongniee82 said:
cannot downgrade to nougat..you must install xxu2 only version
Click to expand...
Click to collapse
picaadi said:
Does any nougat firmware have bootloader v2?
Click to expand...
Click to collapse
I think the only other solution is to install the custom roms.
What if we try wih the oem unlock?
ryaneu said:
I think the only other solution is to install the custom roms.
Click to expand...
Click to collapse
ryaneu said:
I think the only other solution is to install the custom roms.
Click to expand...
Click to collapse
Hello,
Ive got the same problem. And I couldn't find a U2 release of nougat...
Could you suggest me some custom rom witch have U2 compatible ?
Thanks a lot
Related
good day ,
anyone can help me with installing stock version of android 4.3 version on my GS4 ?! i have problem while using odin v3.09 to flash my Galaxy s4 i9505 to stock firmware version 4.3 with the md5 file downloaded from sammobile.com , here is some info about my phone :
having CWM recovery installed
running on custom ROM CM11 4.4.4
error message in odin is as below :
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
micphone7 said:
good day ,
anyone can help me with installing stock version of android 4.3 version on my GS4 ?! i have problem while using odin v3.09 to flash my Galaxy s4 i9505 to stock firmware version 4.3 with the md5 file downloaded from sammobile.com , here is some info about my phone :
having CWM recovery installed
running on custom ROM CM11 4.4.4
error message in odin is as below :
Odin v.3 engine (ID:5)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
sbl1.mbn
NAND Write Start!!
sbl2.mbn
sbl3.mbn
rpm.mbn
aboot.mbn
FAIL! (Auth)
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Download the official firmware of your country and carrier from samobile.Com and flash with odin
This will flash stock firmware and stock recovery
Sent from my GT-I9505 using Tapatalk
1eyedmonster said:
Download the official firmware of your country and carrier from samobile.Com and flash with odin
This will flash stock firmware and stock recovery
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
I just bought it from thailand !
micphone7 said:
I just bought it from thailand !
Click to expand...
Click to collapse
You wont be able to flash 4.3 if youre on 4.4.2
"If someone helps, never forget to hit thanks ? "
Does anyone know where I can find the stock firmware for my at&t galaxy s7 SM-930A APB4? I found APB5 but ODIN won't flash it as it's saying its the incorrect matching firmware. I have searched far and wide trying to find the firmware for my phone. It's like I somehow managed to snag the most niche phone on the planet with no stock firmware. Thanks!
PB5 should flash fine. Try a different odin
This is what I get when I try to flash APB5
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And then on my Galaxy s7 it says "SW REV CHECK FAIL : [system]Fused 3 > Binary 1
iscream612 said:
This is what I get when I try to flash APB5
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And then on my Galaxy s7 it says "SW REV CHECK FAIL : [system]Fused 3 > Binary 1
Click to expand...
Click to collapse
A quick search I ran found that it seems you may be trying to downgrade. What version were you on prior to this? It sounds like you were either on a T-Mobile firmware or on the latest PI2 firmware (Based on that "Fused 3"). If you don't remember but you haven't taken any updates since you got it, could you provide the date you got it? Then I could help. Thanks.
SkyAttacksX said:
A quick search I ran found that it seems you may be trying to downgrade. What version were you on prior to this? It sounds like you were either on a T-Mobile firmware or on the latest PI2 firmware (Based on that "Fused 3"). If you don't remember but you haven't taken any updates since you got it, could you provide the date you got it? Then I could help. Thanks.
Click to expand...
Click to collapse
I was on the newest Sept bootloader update. With the help of a couple people I was able to flash the unlocked firmware.
http://forum.xda-developers.com/att-galaxy-s7/how-to/please-shed-light-att-s7-root-failures-t3481904
Joe3681 is currently uploaded the Sept AT&T firmware so soon I should be able to flash back to at&T and be all set.
Thanks!!
Hello I am new to this process but I am running my S8, SM-950U1, on Android 8.0.0 Oreo.
I want to root it by adding safestrap but I need to be on Nougat to do this.
Does anyone know how to properly downgrade from android 8.0.0 to android 7.0.0?
Side Note: I have tried to flash the 7.0.0 firmware onto my phone and this is the error message
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Sweggyp said:
Hello I am new to this process but I am running my S8, SM-950U1, on Android 8.0.0 Oreo.
I want to root it by adding safestrap but I need to be on Nougat to do this.
Does anyone know how to properly downgrade from android 8.0.0 to android 7.0.0?
Side Note: I have tried to flash the 7.0.0 firmware onto my phone and this is the error message
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
1. You are not using latest Odin version ( 3.13.1 )
2. Due to boot loader versions you can not downgrade from Oreo to nougat.
Sweggyp said:
Hello I am new to this process but I am running my S8, SM-950U1, on Android 8.0.0 Oreo.
I want to root it by adding safestrap but I need to be on Nougat to do this.
Does anyone know how to properly downgrade from android 8.0.0 to android 7.0.0?
Side Note: I have tried to flash the 7.0.0 firmware onto my phone and this is the error message
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
5th digit from end in your firmware is you current bootloader bit number. Im gonna assume its a 5.
After you have safe strap you can then use safe strap to insall the bit 5 combination bootloader then flash any nougat system IMG that has been extracted from a bit 2 firmware and su and busy box. There are several guides posted on this now. You cannot just flash a nougat firmware which is bit 2.
---------- Post added at 07:12 AM ---------- Previous post was at 07:11 AM ----------
spawnlives said:
1. You are not using latest Odin version ( 3.13.1 )
2. Due to boot loader versions you can not downgrade from Oreo to nougat.
Click to expand...
Click to collapse
With safe strap you can downgrade to nougat. As long as its a bit 5 and if your still on the oreo betas which are bit 2 you can downgrade.
Hello Guýs,
Iam helpless and dont kow what to do right now. I got me TWRP and wanted to install a Rom but i bricked my phone i guess.
Iam trying to get back to stock rom with Odin 3.12.3 but i always get fails. I got a new PIT file with odin.
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Removed!!
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any tipps would be very helpfull to me.
p.s. if i check the re-partition box i dont get any connection.
p.s.s. i have no kies but the Samsung USB Drivers installed
Michel93 said:
Hello Guýs,
Iam helpless and dont kow what to do right now. I got me TWRP and wanted to install a Rom but i bricked my phone i guess.
Iam trying to get back to stock rom with Odin 3.12.3 but i always get fails. I got a new PIT file with odin.
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Removed!!
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any tipps would be very helpfull to me.
p.s. if i check the re-partition box i dont get any connection.
p.s.s. i have no kies but the Samsung USB Drivers installed
Click to expand...
Click to collapse
kies is useless. your drivers are properly installed if Odin recognizes your device.
Download Odin 3.13.1 and try it again
Thanks I'll try when I am back home. I Cann only access download mode BTW. Else I stuck in a boot loop with this blue installing update screen.
Michel93 said:
Thanks I'll try when I am back home. I Cann only access download mode BTW. Else I stuck in a boot loop with this blue installing update screen.
Click to expand...
Click to collapse
as long as you can get to download mode, youre in good shape. From there, its merely a try-and-fail process of different Odin and firmware versions
Ty I was getting pretty despred after hours of fails and disappointment
Michel93 said:
Ty I was getting pretty despred after hours of fails and disappointment
Click to expand...
Click to collapse
it can get that way especially if youre downloading your firmwares from sammobile.com/firmwares directly. Takes FOREVAAAAAAR and then when it fails it gets SUPER irritating. Get the Frija firmware download tool here and the speed difference will blow you away. There is another firmware download tool out there too and i have it on my computer at home, but i cant remember what its called and the Frija tool is as good as that other tool anyways.
youdoofus said:
kies is useless. your drivers are properly installed if Odin recognizes your device.
Download Odin 3.13.1 and try it again
Click to expand...
Click to collapse
got the same problem with 13.1
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5582 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
HELL YEAH!!!
i think i got it!
I used the Firmware from "Frija", Odin 3.13.1 and a PIT-File from https://zfirmware.com/download-samsung-galaxy-s8-g950f-pit-file/.
The Problem with the connection was i had to enter Download Mode every time new an had to do the Pit with the Firmware together.
Thanks for ur help!
I will stay active here and try to helb other poor guys like myself.
Michel93 said:
HELL YEAH!!!
i think i got it!
I used the Firmware from "Frija", Odin 3.13.1 and a PIT-File from https://zfirmware.com/download-samsung-galaxy-s8-g950f-pit-file/.
The Problem with the connection was i had to enter Download Mode every time new an had to do the Pit with the Firmware together.
Thanks for ur help!
I will stay active here and try to helb other poor guys like myself.
Click to expand...
Click to collapse
right on, right on! yeah if you can get to download mode, youre usually good. From there its just getting the right Odin/firmware combo. Same holds true on 90%+ of most newer samsung phones
I am frustrated, every time I try to flash my phone from Oreo 8.1.0 to Nougat 7.0 I get an error.
I have SM-J530F and I downloaded the firmware from sammobile, tried 4 different for Germany.
The USB port works perfectly fine, anti virus program is disabled for the flashing process and Odin is run as an administrator.
Odin error:
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> userdata.img
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 2962 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation.. <ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL! <ID:0/005>
<ID:0/005> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1)
Than my phone says:
SW REV Check fail (bootloader) device: 5 binary: 2
Who can help me? D:
LalaGhost said:
I am frustrated, every time I try to flash my phone from Oreo 8.1.0 to Nougat 7.0 I get an error.
I have SM-J530F and I downloaded the firmware from sammobile, tried 4 different for Germany.
The USB port works perfectly fine, anti virus program is disabled for the flashing process and Odin is run as an administrator.
Odin error:
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> userdata.img
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 2962 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation.. <ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL! <ID:0/005>
<ID:0/005> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1)
Than my phone says:
SW REV Check fail (bootloader) device: 5 binary: 2
Who can help me? D:
Click to expand...
Click to collapse
you can't downgrade 8.1 to 7.0 due to both having different Bootloaders.
BlackAxiom said:
you can't downgrade 8.1 to 7.0 due to both having different Bootloaders.
Click to expand...
Click to collapse
Ok...