Hello Guýs,
Iam helpless and dont kow what to do right now. I got me TWRP and wanted to install a Rom but i bricked my phone i guess.
Iam trying to get back to stock rom with Odin 3.12.3 but i always get fails. I got a new PIT file with odin.
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Removed!!
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any tipps would be very helpfull to me.
p.s. if i check the re-partition box i dont get any connection.
p.s.s. i have no kies but the Samsung USB Drivers installed
Michel93 said:
Hello Guýs,
Iam helpless and dont kow what to do right now. I got me TWRP and wanted to install a Rom but i bricked my phone i guess.
Iam trying to get back to stock rom with Odin 3.12.3 but i always get fails. I got a new PIT file with odin.
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Removed!!
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any tipps would be very helpfull to me.
p.s. if i check the re-partition box i dont get any connection.
p.s.s. i have no kies but the Samsung USB Drivers installed
Click to expand...
Click to collapse
kies is useless. your drivers are properly installed if Odin recognizes your device.
Download Odin 3.13.1 and try it again
Thanks I'll try when I am back home. I Cann only access download mode BTW. Else I stuck in a boot loop with this blue installing update screen.
Michel93 said:
Thanks I'll try when I am back home. I Cann only access download mode BTW. Else I stuck in a boot loop with this blue installing update screen.
Click to expand...
Click to collapse
as long as you can get to download mode, youre in good shape. From there, its merely a try-and-fail process of different Odin and firmware versions
Ty I was getting pretty despred after hours of fails and disappointment
Michel93 said:
Ty I was getting pretty despred after hours of fails and disappointment
Click to expand...
Click to collapse
it can get that way especially if youre downloading your firmwares from sammobile.com/firmwares directly. Takes FOREVAAAAAAR and then when it fails it gets SUPER irritating. Get the Frija firmware download tool here and the speed difference will blow you away. There is another firmware download tool out there too and i have it on my computer at home, but i cant remember what its called and the Frija tool is as good as that other tool anyways.
youdoofus said:
kies is useless. your drivers are properly installed if Odin recognizes your device.
Download Odin 3.13.1 and try it again
Click to expand...
Click to collapse
got the same problem with 13.1
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5582 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
HELL YEAH!!!
i think i got it!
I used the Firmware from "Frija", Odin 3.13.1 and a PIT-File from https://zfirmware.com/download-samsung-galaxy-s8-g950f-pit-file/.
The Problem with the connection was i had to enter Download Mode every time new an had to do the Pit with the Firmware together.
Thanks for ur help!
I will stay active here and try to helb other poor guys like myself.
Michel93 said:
HELL YEAH!!!
i think i got it!
I used the Firmware from "Frija", Odin 3.13.1 and a PIT-File from https://zfirmware.com/download-samsung-galaxy-s8-g950f-pit-file/.
The Problem with the connection was i had to enter Download Mode every time new an had to do the Pit with the Firmware together.
Thanks for ur help!
I will stay active here and try to helb other poor guys like myself.
Click to expand...
Click to collapse
right on, right on! yeah if you can get to download mode, youre usually good. From there its just getting the right Odin/firmware combo. Same holds true on 90%+ of most newer samsung phones
Related
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My Phone N9005 and Lollipop 5.0 N9005XXUGBNL8 installed.
Odin when I go to install v3.10 twrp or CR with getting the above error.
Debugging active.
I run the Odin as administrator.
"Auto reboot" and "Reset time" marked.
V3.7 I get the same error message.
Please help me?
In lollipop u can just install cwm
Auto reboot don't mark
freegalaxy said:
In lollipop u can just install cwm
Auto reboot don't mark
Click to expand...
Click to collapse
I use TWRP 2.8.10 recovery it work very well
auto reboot check
ZeoN1907 said:
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My Phone N9005 and Lollipop 5.0 N9005XXUGBNL8 installed.
Odin when I go to install v3.10 twrp or CR with getting the above error.
Debugging active.
I run the Odin as administrator.
"Auto reboot" and "Reset time" marked.
V3.7 I get the same error message.
Please help me?
Click to expand...
Click to collapse
use odin 3.09
search and download CF-Auto-Root-hlte-hltexx-smn9005
and put it in AP amd flash wait 2 minutes and done
i just did this today and it worked
cybertron_001 said:
use odin 3.09
search and download CF-Auto-Root-hlte-hltexx-smn9005
and put it in AP amd flash wait 2 minutes and done
i just did this today and it worked
Click to expand...
Click to collapse
Odin on my pc doesn't has AP, it has PDA instread, so it works the same way?
thahim said:
Odin on my pc doesn't has AP, it has PDA instread, so it works the same way?
Click to expand...
Click to collapse
Same they are. AP = PDA. The term AP was introduced from Odin 3.09 I think, all the prior versions of Odin have PDA labelled instead of AP.
Now I've searched just about all of Google on this, but I haven't been able to find a solution yet. Everyone here seems to know the most about this kind of stuff so I figured I'd make an account and explain my situation.
Backstory / How it happened
So, earlier today I figured I'd root my AT&T S7 Edge, I used a tutorial from Max Lee (I can't post links yet but if you need to find it I'm sure you can Google it) to get the job done, and after a while I managed to get the thing rooted. I knew absolutely nothing about what the hell flashing, roms, bricked phones, bootloops etc. were and now I only know a bit about them. So the phone was rooted just fine, I had SuperSU running, and a few other root apps, but then I figured I'd install xposed installer. So I went ahead and downloaded the wrong version (whoops) and it installed its framework and then said it needed to reboot my phone, low and behold we have a bootloop. It stays at the AT&T logo indefinitely if I'd let it. I'll happily admit to that being completely my mistake, I read the warning that it may cause a bootloop but I went ahead and installed it anyway thinking I could fix it if it happened. (This thread is my walk of shame I suppose)
Solutions I've tried
Now that the background has been explained, I'll go through the list of solutions I've tried, mind you I'm no expert at any of this so some of the info I give may seem redundant or nonsensical.
- Rebooting into recovery and clearing cache and factory resetting in every order you can imagine
* Only interesting thing I could find is that it still says custom on both the download mode (the one where you press vol down, power, and home) and when you reboot the phone and it goes through the initial animation, it shows custom with a little settings-looking icon just before it goes through the AT&T animation and takes a **** on my self esteem.
- Waiting ~1 hour for the AT&T logo to change to something other than an AT&T logo (I was desperate)
* Yeah nothing came out of that one...
- Flashing every stock firmware I could find on the internet, with every version of Odin I could find.
* Kept getting the same error, "FAIL! (Auth)". I looked it up and all I found was old threads from 2013 on the Galaxy S4, with some now-irrelevant information, I couldn't seem to get it to work, but I'm positive that's what I need to do unless you guys know another solution. Here's the full log:
Code:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Don't know what I did but after that at the download screen it says at the top left "SW REV CHECK FAIL : [aboot]Fused 4 > Binary 2
Sorry for the wall of text, I tried to format it as nicely as possible to make it somewhat readable. If anyone needs more info let me know.
Can you flash TWRP? If you can maybe you can boot into TWRP and then try to flash any rom from XDA and see if it comes alive...
alehawk said:
Can you flash TWRP? If you can maybe you can boot into TWRP and then try to flash any rom from XDA and see if it comes alive...
Click to expand...
Click to collapse
Thank you for the response
I've tried getting TWRP to work, but apparently there still isn't a way to get it working on the AT&T, I was under the impression that it was only for international and Korean versions. I haven't been able to find any version of TWRP that works for my device.
However I just did try some newer stock firmware from, "theandroidsoul" which partially worked, being that I'm desperate and don't know what I'm doing I just tried flashing all three:
G935AUCS4API2 - This one worked more than the others, but it seems at some point it disconnects for whatever reason, causing it to fail. After that my phone gave me the whole "You messed up go use smart switch" deal, and smart switch was saying my device was unsupported. That said I'm not sure what is causing the fake USB disconnect cause I can hear the windows sound for the USB disconnecting, but I'm not sure why.
Here's the log:
Code:
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> xbl.elf
<ID:0/005> tz.mbn
<ID:0/005> hyp.mbn
<ID:0/005> devcfg.mbn
<ID:0/005> pmic.elf
<ID:0/005> rpm.mbn
<ID:0/005> cmnlib.mbn
<ID:0/005> keymaster.mbn
<ID:0/005> apdp.mbn
<ID:0/005> msadp.mbn
<ID:0/005> cmnlib64.mbn
<ID:0/005> sec.dat
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
And here's the log after another try (I factory reset and wiped cache again to give it another go)
Code:
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> xbl.elf
<ID:0/005> tz.mbn
<ID:0/005> hyp.mbn
<ID:0/005> devcfg.mbn
<ID:0/005> pmic.elf
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I found it interesting that it got even less far than before.
G935AUCS2APH1 - Stopped at lksecapp.mbn then went to FAIL! (Auth). There was no disconnect or reconnect
G935AATT2APG1 - Same as above
I seem to be stuck in a similar situation. Did you ever find a fix?
wunderkinder said:
I seem to be stuck in a similar situation. Did you ever find a fix?
Click to expand...
Click to collapse
I had the at&t s7 edge before and had the same problem but not sure if it was the same odin error.
But this is how you flash a stock rom on the at&t:
-You must use the princecomsy odin (search for it on google)
-Here is the stock rom with the latest security update (type "G935AUCS4BRA1" in the google search bar)
(I wasn't allowed to post links)
unzip and flash
tell me how it goes
I am trying to return my phone to stock but I keep getting this error:
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I really need help, it is bricked.
Use this app from your computer, with your phone in download mode. It saved me. I believe it's because you may be trying to flash to a previous version of firmware. http://support-us.samsung.com/VerizonSoftwareUpdateWin
Did you get this fixed?
Sent from my SM-G930V using Tapatalk
This error has happened to me before. Don't use the HOME CSC file, use the other one that wipes your phone. The Home CSC never worked for some reason.
My j5 (sm-j510fn) got pattern-locked n i tried to reset it but no success! Odin cant flash cuz the phone is on "mdm mode" or something and wipes wont working- what should i do?
try using nand erase all in odin
didnt worked bro...
EDIT: weird... cant upload an image of that...
anyway, the log says:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005> ERASE_SECTOR: 0
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
use different firmware.
it isnt possible too body, due to odin refusing listen to me! it seems his hammer got heavier and now nothing is possible for me! cant flash rom/ firmware/ recovery- everything iv done give me a big red FAIL and a message of "MDM MODE, CANT DOWNLOAD" at the phone screen
Recently, I reset my old Galaxy S8 and restarted it but was met with the "Only Official Binaries are Allowed to be Flashed" issue.
After a large amount of time spent trying to flash official stock firmware on, I am faced with :
"<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed."
I have reinstalled drivers as well as attempted to go into TWRP recovery which is presumably why this issue occurred.
Any suggestions or solutions are greatly appreciated.
Changed to Odin 3.12.7 from 3.13.1 and got:
"<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin.lz4"
Is also stuck on set partition
av3nje said:
Recently, I reset my old Galaxy S8 and restarted it but was met with the "Only Official Binaries are Allowed to be Flashed" issue.
After a large amount of time spent trying to flash official stock firmware on, I am faced with :
"<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed."
I have reinstalled drivers as well as attempted to go into TWRP recovery which is presumably why this issue occurred.
Any suggestions or solutions are greatly appreciated.
Changed to Odin 3.12.7 from 3.13.1 and got:
"<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin.lz4"
Is also stuck on set partition
Click to expand...
Click to collapse
youre probably using the wrong version of Odin. Go get a fresh copy of v3.13.1 and try it with that
and/or a fresh download of the firmware from www.sammobile.com/firmwares but id use frijas firmware download tool in all honesty, its about 12 times faster
youdoofus said:
youre probably using the wrong version of Odin. Go get a fresh copy of v3.13.1 and try it with that
and/or a fresh download of the firmware from but id use frijas firmware download tool in all honesty, its about 12 times faster
Click to expand...
Click to collapse
Just attempted to flash Oreo 8.0 with a fresh Odin 3.13.1 and I was given the same "Complete(Write) operation failed."
av3nje said:
Just attempted to flash Oreo 8.0 with a fresh Odin 3.13.1 and I was given the same "Complete(Write) operation failed."
Click to expand...
Click to collapse
After using a different firmware, it worked fine. Thank you for your suggestion.
av3nje said:
After using a different firmware, it worked fine. Thank you for your suggestion.
Click to expand...
Click to collapse
glad to help!