Hi there,
I really need a quick few minutes of help. I began the night last night by trying to upgrade safestrap from 3.72 to 3.75, for what I later learned to be for no good reason. Anyway, I ended up wiping my entire internal storage including the root files, which forced me to odin back to MJE from NC2. So then I installed MJE and let the system upgrade to NC4. Then I proceeded to root and safestrap my system with success (including installing busybox). I then rebooted into recovery and flashed the Eclipse rom (I've tried stock and Rom-Slot1) and then rebooted into download mode and Odin'ed the NC2 kernel, which results in a fail every time. The odin log says it falis after aboot.mbn every time.
Please consider helping me!
Thanks!
P.s. This is the odin fail log.
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> NON-HLOS.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i have a 32 gb n900 phone that with official lolipop that i was put it from sammobile.com and flash it by odin, then i tried 2 do a root with odin but it is not succes so i do it by kingo root
now, i need to flash a xda's developer Rom 2 my mobile by odin but there are a problem in odin to flash recovery !!!
i tried 2 use a varity of recoveries but it is not useful
it (odin) present that the recovery is failed with red and give
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
plz help because every things i did 2 make a recovry is unsuccedes
In download mode does it shows reactivation lockN?
Sent from my GT-N7000
Rosli59564 said:
In download mode does it shows reactivation lockN?
Sent from my GT-N7000
Click to expand...
Click to collapse
yes ??
My j5 (sm-j510fn) got pattern-locked n i tried to reset it but no success! Odin cant flash cuz the phone is on "mdm mode" or something and wipes wont working- what should i do?
try using nand erase all in odin
didnt worked bro...
EDIT: weird... cant upload an image of that...
anyway, the log says:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005> ERASE_SECTOR: 0
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
use different firmware.
it isnt possible too body, due to odin refusing listen to me! it seems his hammer got heavier and now nothing is possible for me! cant flash rom/ firmware/ recovery- everything iv done give me a big red FAIL and a message of "MDM MODE, CANT DOWNLOAD" at the phone screen
SM-935F from XSG region. Unlocked and Qualcomm processor. Never enabled debugging mode or OEM in developer tools. I tried to flash my phone with the following firmware. However when I tried to do it, Odin failed. Also Smart Switch Samsung doesn't initiate/emergency recovery says cannot proceed due to an error.
Samsung Smart Switch shows the below data while trying to initiate the recovery which eventually fails.
PDA: QH8 / CSC: QG2 / PHONE:QG3 (COS)
Phone doesn't go to recovery mode at all. I can get it to Download mode however everytime I try to run a firmware, it shows "Complete(Write) operation failed."
Also tried to do abd enable reboot which said "device(null) not found". Just need this working and I don't care about losing data. Please let me know how to proceed.
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> modem_debug.bin
<ID:0/005> Home Binary Download
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hello Guýs,
Iam helpless and dont kow what to do right now. I got me TWRP and wanted to install a Rom but i bricked my phone i guess.
Iam trying to get back to stock rom with Odin 3.12.3 but i always get fails. I got a new PIT file with odin.
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Removed!!
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any tipps would be very helpfull to me.
p.s. if i check the re-partition box i dont get any connection.
p.s.s. i have no kies but the Samsung USB Drivers installed
Michel93 said:
Hello Guýs,
Iam helpless and dont kow what to do right now. I got me TWRP and wanted to install a Rom but i bricked my phone i guess.
Iam trying to get back to stock rom with Odin 3.12.3 but i always get fails. I got a new PIT file with odin.
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Removed!!
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any tipps would be very helpfull to me.
p.s. if i check the re-partition box i dont get any connection.
p.s.s. i have no kies but the Samsung USB Drivers installed
Click to expand...
Click to collapse
kies is useless. your drivers are properly installed if Odin recognizes your device.
Download Odin 3.13.1 and try it again
Thanks I'll try when I am back home. I Cann only access download mode BTW. Else I stuck in a boot loop with this blue installing update screen.
Michel93 said:
Thanks I'll try when I am back home. I Cann only access download mode BTW. Else I stuck in a boot loop with this blue installing update screen.
Click to expand...
Click to collapse
as long as you can get to download mode, youre in good shape. From there, its merely a try-and-fail process of different Odin and firmware versions
Ty I was getting pretty despred after hours of fails and disappointment
Michel93 said:
Ty I was getting pretty despred after hours of fails and disappointment
Click to expand...
Click to collapse
it can get that way especially if youre downloading your firmwares from sammobile.com/firmwares directly. Takes FOREVAAAAAAR and then when it fails it gets SUPER irritating. Get the Frija firmware download tool here and the speed difference will blow you away. There is another firmware download tool out there too and i have it on my computer at home, but i cant remember what its called and the Frija tool is as good as that other tool anyways.
youdoofus said:
kies is useless. your drivers are properly installed if Odin recognizes your device.
Download Odin 3.13.1 and try it again
Click to expand...
Click to collapse
got the same problem with 13.1
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5582 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
HELL YEAH!!!
i think i got it!
I used the Firmware from "Frija", Odin 3.13.1 and a PIT-File from https://zfirmware.com/download-samsung-galaxy-s8-g950f-pit-file/.
The Problem with the connection was i had to enter Download Mode every time new an had to do the Pit with the Firmware together.
Thanks for ur help!
I will stay active here and try to helb other poor guys like myself.
Michel93 said:
HELL YEAH!!!
i think i got it!
I used the Firmware from "Frija", Odin 3.13.1 and a PIT-File from https://zfirmware.com/download-samsung-galaxy-s8-g950f-pit-file/.
The Problem with the connection was i had to enter Download Mode every time new an had to do the Pit with the Firmware together.
Thanks for ur help!
I will stay active here and try to helb other poor guys like myself.
Click to expand...
Click to collapse
right on, right on! yeah if you can get to download mode, youre usually good. From there its just getting the right Odin/firmware combo. Same holds true on 90%+ of most newer samsung phones