Database Users

[Q][SOLVED!] SM-N9005 No Recovery!

SOLVED! I found this thread: http://forum.xda-developers.com/showthread.php?t=2613169&page=1
CWM: http://d-h.st/users/xiaolu/?fld_id=31400
twrp: http://forum.xda-developers.com/showpost.php?p=50333147&postcount=398&nocache=1&z=322768632322549
I'm very new to this type of thing, so please excuse my ignorance.
Android Version: 4.4.2
I have no recovery on my note 3, i have tried flashing Cwm and twrp, both times i am told the flash is a pass, but when i reboot into recovery i get this message: "Recovery booting. . . .
"recovery is not seandroid enforcing set warranty bit recovery" and the phone boots successfully into the stock rom. am i flashing the wrong twrp file?
I guess you will need more information, and i'll give it if someone is willing to help me.
Twrp flash file: openrecovery-twrp-2.6.3.7-hlte.img.tar
Odin log for the twrp flash:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!

What this means is that based on what you said is that youve flashed the wrong recovery.
What version of android are you currently on?
sent from my JEDI ELITE Note 3
for best xda results, click to enlarge ?
http://img268.imageshack.us/img268/9564/searchitnoob.gif

I'm on Android 4.4.2

CharlieSkies said:
I'm on Android 4.4.2
Click to expand...
Click to collapse
You need twrp 2.7
Try again
sent from my JEDI ELITE Note 3
for best xda results, click to enlarge ?
http://img268.imageshack.us/img268/9564/searchitnoob.gif

recovery will not flash

Hello, after hours of searching on google i cannot seem to find a solution to my problem. I am running 4.4.2 NC1. I have rooted it with towel root and tried flashing twrp with rom installer. It claimed success but now i cannot boot into recovery. I have tried flashing twrp with odin but it gives me this error:
"<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
I have tried restarting my computer, phone and using a different chord. Im at the end of my rope here and need some help. Thanks in advance.

You can't flash twrp. The only recovery you can use is safestrap. Start by reading this
http://forum.xda-developers.com/showthread.php?p=53758227
Sent from my Nexus 5 using XDA Free mobile app

[Q] Note 4 SM-N910S Rom to N910U Rom

Excuse Me, I have a Note 4, and want to change the Rom from N910S (Korea) to N910U (HK).
I tried to use Odin to directly install N910U Rom but fail, with follows error message:
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help, thousand Thanks!

kwok_h said:
Excuse Me, I have a Note 4, and want to change the Rom from N910S (Korea) to N910U (HK).
I tried to use Odin to directly install N910U Rom but fail, with follows error message:
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help, thousand Thanks!
Click to expand...
Click to collapse
Hi mate
just have finded out what was giving the error.
I've unchecked the reactivation lock under security tab on the android Kitkat... Now can flash whatever I wanted with odin.
Sent From Out of Nowhere

N910s
Do you mean you can flash over 910s an 910u rom ? ....

recovery problem in n9oo

i have a 32 gb n900 phone that with official lolipop that i was put it from sammobile.com and flash it by odin, then i tried 2 do a root with odin but it is not succes so i do it by kingo root
now, i need to flash a xda's developer Rom 2 my mobile by odin but there are a problem in odin to flash recovery !!!
i tried 2 use a varity of recoveries but it is not useful
it (odin) present that the recovery is failed with red and give
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
plz help because every things i did 2 make a recovry is unsuccedes

Then turn off reactivation lock
Sent from my GT-N7000

Rosli59564 said:
Then turn off reactivation lock
Sent from my GT-N7000
Click to expand...
Click to collapse
then after what ???
and how can I do this ??

As far as I remember reactivation locked is only available in KK. Not sure with Lollipop. I'm not with stock Lollipop for long. Some more my phone has just broke so I couldn't tell more about it.
Sent from my GT-N7000

Did you Troy different USB cables and USB ports?
I have reactivation lock on note 3 n900w8 so maybe some versions of note 3 have the lock in lollipop.

Can't flash CRAP firmware with odin 3.13

Hi!
I was trying to flash G950FXXU1CRAP on my SM-G950F
These are the four files i'm flashing:
AP_G950FXXU1CRAP_CL12993647_QB16754748_REV00_user_low_ship_meta.tar
BL_G950FXXU1CRAP_CL12993647_QB16754748_REV00_user_low_ship.tar
CP_G950FXXU1CRAP_CP8821295_CL12993647_QB16754748_REV00_user_low_ship.tar
HOME_CSC_OXM_G950FOXM1CRAP_CL12993647_QB16754748_REV00_user_low_ship.tar
This is the error I get on Odin:
Code:
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 5869 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> cm.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Before I also got a "device 2 binary 1 error" and once a "device 3 binary 1 error" while flashing, on the download screen, now I can't get it anymore.
I used Odin 3.13.1 and Prince Comsy Odin, none of those two worked.
I have no access to the recovery or the system.
What is going wrong?

Sempiternum said:
Hi!
I was trying to flash G950FXXU1CRAP on my SM-G950F
These are the four files i'm flashing:
AP_G950FXXU1CRAP_CL12993647_QB16754748_REV00_user_low_ship_meta.tar
BL_G950FXXU1CRAP_CL12993647_QB16754748_REV00_user_low_ship.tar
CP_G950FXXU1CRAP_CP8821295_CL12993647_QB16754748_REV00_user_low_ship.tar
HOME_CSC_OXM_G950FOXM1CRAP_CL12993647_QB16754748_REV00_user_low_ship.tar
This is the error I get on Odin:
Before I also got a "device 2 binary 1 error" and once a "device 3 binary 1 error" while flashing, on the download screen, now I can't get it anymore.
I used Odin 3.13.1 and Prince Comsy Odin, none of those two worked.
I have no access to the recovery or the system.
What is going wrong?
Click to expand...
Click to collapse
Sounds like you are trying to downgrade firmware from a higher bootloader version to a lower one.

U2 to U1
Sempiternum said:
Hi!
I was trying to flash G950FXXU1CRAP on my SM-G950F
These are the four files i'm flashing:
AP_G950FXXU1CRAP_CL12993647_QB16754748_REV00_user_low_ship_meta.tar
BL_G950FXXU1CRAP_CL12993647_QB16754748_REV00_user_low_ship.tar
CP_G950FXXU1CRAP_CP8821295_CL12993647_QB16754748_REV00_user_low_ship.tar
HOME_CSC_OXM_G950FOXM1CRAP_CL12993647_QB16754748_REV00_user_low_ship.tar
This is the error I get on Odin:
Code:
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 5869 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> cm.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Before I also got a "device 2 binary 1 error" and once a "device 3 binary 1 error" while flashing, on the download screen, now I can't get it anymore.
I used Odin 3.13.1 and Prince Comsy Odin, none of those two worked.
I have no access to the recovery or the system.
What is going wrong?
Click to expand...
Click to collapse
Does your current firmware say U2?
The "CRAP" firmware you mentioned says U1 and I read somewhere you can't fallback from U2 to U1