Hi!
I was trying to flash G950FXXU1CRAP on my SM-G950F
These are the four files i'm flashing:
AP_G950FXXU1CRAP_CL12993647_QB16754748_REV00_user_low_ship_meta.tar
BL_G950FXXU1CRAP_CL12993647_QB16754748_REV00_user_low_ship.tar
CP_G950FXXU1CRAP_CP8821295_CL12993647_QB16754748_REV00_user_low_ship.tar
HOME_CSC_OXM_G950FOXM1CRAP_CL12993647_QB16754748_REV00_user_low_ship.tar
This is the error I get on Odin:
Code:
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 5869 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> cm.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Before I also got a "device 2 binary 1 error" and once a "device 3 binary 1 error" while flashing, on the download screen, now I can't get it anymore.
I used Odin 3.13.1 and Prince Comsy Odin, none of those two worked.
I have no access to the recovery or the system.
What is going wrong?
Sempiternum said:
Hi!
I was trying to flash G950FXXU1CRAP on my SM-G950F
These are the four files i'm flashing:
AP_G950FXXU1CRAP_CL12993647_QB16754748_REV00_user_low_ship_meta.tar
BL_G950FXXU1CRAP_CL12993647_QB16754748_REV00_user_low_ship.tar
CP_G950FXXU1CRAP_CP8821295_CL12993647_QB16754748_REV00_user_low_ship.tar
HOME_CSC_OXM_G950FOXM1CRAP_CL12993647_QB16754748_REV00_user_low_ship.tar
This is the error I get on Odin:
Before I also got a "device 2 binary 1 error" and once a "device 3 binary 1 error" while flashing, on the download screen, now I can't get it anymore.
I used Odin 3.13.1 and Prince Comsy Odin, none of those two worked.
I have no access to the recovery or the system.
What is going wrong?
Click to expand...
Click to collapse
Sounds like you are trying to downgrade firmware from a higher bootloader version to a lower one.
U2 to U1
Sempiternum said:
Hi!
I was trying to flash G950FXXU1CRAP on my SM-G950F
These are the four files i'm flashing:
AP_G950FXXU1CRAP_CL12993647_QB16754748_REV00_user_low_ship_meta.tar
BL_G950FXXU1CRAP_CL12993647_QB16754748_REV00_user_low_ship.tar
CP_G950FXXU1CRAP_CP8821295_CL12993647_QB16754748_REV00_user_low_ship.tar
HOME_CSC_OXM_G950FOXM1CRAP_CL12993647_QB16754748_REV00_user_low_ship.tar
This is the error I get on Odin:
Code:
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 5869 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> cm.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Before I also got a "device 2 binary 1 error" and once a "device 3 binary 1 error" while flashing, on the download screen, now I can't get it anymore.
I used Odin 3.13.1 and Prince Comsy Odin, none of those two worked.
I have no access to the recovery or the system.
What is going wrong?
Click to expand...
Click to collapse
Does your current firmware say U2?
The "CRAP" firmware you mentioned says U1 and I read somewhere you can't fallback from U2 to U1
Related
Excuse Me, I have a Note 4, and want to change the Rom from N910S (Korea) to N910U (HK).
I tried to use Odin to directly install N910U Rom but fail, with follows error message:
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help, thousand Thanks!
kwok_h said:
Excuse Me, I have a Note 4, and want to change the Rom from N910S (Korea) to N910U (HK).
I tried to use Odin to directly install N910U Rom but fail, with follows error message:
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help, thousand Thanks!
Click to expand...
Click to collapse
Hi mate
just have finded out what was giving the error.
I've unchecked the reactivation lock under security tab on the android Kitkat... Now can flash whatever I wanted with odin.
Sent From Out of Nowhere
N910s
Do you mean you can flash over 910s an 910u rom ? ....
i have a 32 gb n900 phone that with official lolipop that i was put it from sammobile.com and flash it by odin, then i tried 2 do a root with odin but it is not succes so i do it by kingo root
now, i need to flash a xda's developer Rom 2 my mobile by odin but there are a problem in odin to flash recovery !!!
i tried 2 use a varity of recoveries but it is not useful
it (odin) present that the recovery is failed with red and give
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
plz help because every things i did 2 make a recovry is unsuccedes
In download mode does it shows reactivation lockN?
Sent from my GT-N7000
Rosli59564 said:
In download mode does it shows reactivation lockN?
Sent from my GT-N7000
Click to expand...
Click to collapse
yes ??
I got a g935v from China. It came preloaded with g9350 china rom. I need google so I tried flashing it back to g935v. I got unsupported dev_type but funny enough the phone boots to the verizon rom. try my malaysia sim card and i got the "sim card is not from verizon" and no reception. i tried to flash to the U rom, odin failed and now that my phone is bricked (same problem unsupported dev type). tried flashing back to g9350 (china and hong kong rom) nothing worked. i would really appreciate if anyone could guide me on what to do next.
my odin everytime i flash
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> persist.img.ext4
<ID:0/006> userdata.img.ext4
<ID:0/006> meta-data/
<ID:0/006> meta-data/1.mf
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hello all !
I'm sorry but i m stuck with my phone.
It's a A5 2017 which was flash with lineageOS with twrp.
I'm trying to install a stock rom downloaded from sammobile A520FXXU6CHR1_A520FOXA6CRH1_XEF (france).
I'm using odin V3.13
FRP lock is OFF
i m using original samsung cable
When i m trying to flash only AP it fail on recovery.img with kernel rev. check fail device:4 binary:3 on the screen.
I try with several version of odin.
Is everyone have some tips to recover my device .
Thank you so much
Julien
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 4229 M
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 4229 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Resolved by using fenrir.
cozo31 said:
Hello all !
I'm sorry but i m stuck with my phone.
It's a A5 2017 which was flash with lineageOS with twrp.
I'm trying to install a stock rom downloaded from sammobile A520FXXU6CHR1_A520FOXA6CRH1_XEF (france).
I'm using odin V3.13
FRP lock is OFF
i m using original samsung cable
When i m trying to flash only AP it fail on recovery.img with kernel rev. check fail device:4 binary:3 on the screen.
I try with several version of odin.
Is everyone have some tips to recover my device .
Thank you so much
Julien
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 4229 M
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 4229 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Click to expand...
Click to collapse
Tried rooting this device (SM-G950F, 3 UK carrier logo), USB Debugging On, OEM Unlock On, odin successfully installed TWRP 3.3.1-1. Device restarted and since then does not go beyond Samsung logo. Can't go into recovery, can't shutdown the phone. Only goes into download mode. Googled and found a way to flash AQF7 BL, did flash it successfully with odin but still the same stuck at boot screen.
Here is what I tried so far;
Tried flashing TWRP older version 3.1.1-2
Tried flashing AQF7 Bootloader (BL_G950FXXU1AQF7_CL11544126_QB13847492_REV00_user_low_ship.tar)
Odin says successful install for both but can't get past boot screen.
Should I try flashing AQF7 firmware now? (downloading anyway). I would've tried it without asking but seen people doing it and still stuck at the same situation.
ODIN Log for TWRP flashing:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1207)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
ODIN Log for BL Flash
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1207)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> param.bin
<ID:0/006> up_param.bin
<ID:0/006> cm.bin
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
What if you try latest BTU firmware (CP/BL/AP/CSC) and then flash TWRP, untick autoreboot and try again? Is what comes to my mind atm
Well finally managed to flash a firmware... all is good. Phone is rooted now. All I wanted to do is to change the imei of this device. Installed Xposed firmware and the module (IMEI Changer). Imei changed as well, but when I put a sim it say not registered to network. Xposed IMEI changer says that its a software exploit and in Pakistan, the telecom authority has blocked all the imported phones (asking ridiculous amount as customs duty). Now I am not sure if the phone is carrier locked or locked by PTA (Pakistan Telecommunication Authority).
I apologize for the thread itself. It was more like a panic thread. Mods, would you please delete the thread, or if it doesn't bother anyone then someone please help me resolve this issue. PTA blocks the unregistered imei. This device is blocked and I have no idea how they do it. Youtube videos claims that imei changer works and changes the imei that PTA reads and unblocks the phone, but still not sure as I've successfully changed the imei.
Thanks.