i have a 32 gb n900 phone that with official lolipop that i was put it from sammobile.com and flash it by odin, then i tried 2 do a root with odin but it is not succes so i do it by kingo root
now, i need to flash a xda's developer Rom 2 my mobile by odin but there are a problem in odin to flash recovery !!!
i tried 2 use a varity of recoveries but it is not useful
it (odin) present that the recovery is failed with red and give
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
plz help because every things i did 2 make a recovry is unsuccedes
Then turn off reactivation lock
Sent from my GT-N7000
Rosli59564 said:
Then turn off reactivation lock
Sent from my GT-N7000
Click to expand...
Click to collapse
then after what ???
and how can I do this ??
As far as I remember reactivation locked is only available in KK. Not sure with Lollipop. I'm not with stock Lollipop for long. Some more my phone has just broke so I couldn't tell more about it.
Sent from my GT-N7000
Did you Troy different USB cables and USB ports?
I have reactivation lock on note 3 n900w8 so maybe some versions of note 3 have the lock in lollipop.
Related
SOLVED! I found this thread: http://forum.xda-developers.com/showthread.php?t=2613169&page=1
CWM: http://d-h.st/users/xiaolu/?fld_id=31400
twrp: http://forum.xda-developers.com/showpost.php?p=50333147&postcount=398&nocache=1&z=322768632322549
I'm very new to this type of thing, so please excuse my ignorance.
Android Version: 4.4.2
I have no recovery on my note 3, i have tried flashing Cwm and twrp, both times i am told the flash is a pass, but when i reboot into recovery i get this message: "Recovery booting. . . .
"recovery is not seandroid enforcing set warranty bit recovery" and the phone boots successfully into the stock rom. am i flashing the wrong twrp file?
I guess you will need more information, and i'll give it if someone is willing to help me.
Twrp flash file: openrecovery-twrp-2.6.3.7-hlte.img.tar
Odin log for the twrp flash:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
What this means is that based on what you said is that youve flashed the wrong recovery.
What version of android are you currently on?
sent from my JEDI ELITE Note 3
for best xda results, click to enlarge ?
http://img268.imageshack.us/img268/9564/searchitnoob.gif
I'm on Android 4.4.2
CharlieSkies said:
I'm on Android 4.4.2
Click to expand...
Click to collapse
You need twrp 2.7
Try again
sent from my JEDI ELITE Note 3
for best xda results, click to enlarge ?
http://img268.imageshack.us/img268/9564/searchitnoob.gif
i have a 32 gb n900 phone that with official lolipop that i was put it from sammobile.com and flash it by odin, then i tried 2 do a root with odin but it is not succes so i do it by kingo root
now, i need to flash a xda's developer Rom 2 my mobile by odin but there are a problem in odin to flash recovery !!!
i tried 2 use a varity of recoveries but it is not useful
it (odin) present that the recovery is failed with red and give
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
plz help because every things i did 2 make a recovry is unsuccedes
In download mode does it shows reactivation lockN?
Sent from my GT-N7000
Rosli59564 said:
In download mode does it shows reactivation lockN?
Sent from my GT-N7000
Click to expand...
Click to collapse
yes ??
Hi!
I was trying to flash G950FXXU1CRAP on my SM-G950F
These are the four files i'm flashing:
AP_G950FXXU1CRAP_CL12993647_QB16754748_REV00_user_low_ship_meta.tar
BL_G950FXXU1CRAP_CL12993647_QB16754748_REV00_user_low_ship.tar
CP_G950FXXU1CRAP_CP8821295_CL12993647_QB16754748_REV00_user_low_ship.tar
HOME_CSC_OXM_G950FOXM1CRAP_CL12993647_QB16754748_REV00_user_low_ship.tar
This is the error I get on Odin:
Code:
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 5869 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> cm.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Before I also got a "device 2 binary 1 error" and once a "device 3 binary 1 error" while flashing, on the download screen, now I can't get it anymore.
I used Odin 3.13.1 and Prince Comsy Odin, none of those two worked.
I have no access to the recovery or the system.
What is going wrong?
Sempiternum said:
Hi!
I was trying to flash G950FXXU1CRAP on my SM-G950F
These are the four files i'm flashing:
AP_G950FXXU1CRAP_CL12993647_QB16754748_REV00_user_low_ship_meta.tar
BL_G950FXXU1CRAP_CL12993647_QB16754748_REV00_user_low_ship.tar
CP_G950FXXU1CRAP_CP8821295_CL12993647_QB16754748_REV00_user_low_ship.tar
HOME_CSC_OXM_G950FOXM1CRAP_CL12993647_QB16754748_REV00_user_low_ship.tar
This is the error I get on Odin:
Before I also got a "device 2 binary 1 error" and once a "device 3 binary 1 error" while flashing, on the download screen, now I can't get it anymore.
I used Odin 3.13.1 and Prince Comsy Odin, none of those two worked.
I have no access to the recovery or the system.
What is going wrong?
Click to expand...
Click to collapse
Sounds like you are trying to downgrade firmware from a higher bootloader version to a lower one.
U2 to U1
Sempiternum said:
Hi!
I was trying to flash G950FXXU1CRAP on my SM-G950F
These are the four files i'm flashing:
AP_G950FXXU1CRAP_CL12993647_QB16754748_REV00_user_low_ship_meta.tar
BL_G950FXXU1CRAP_CL12993647_QB16754748_REV00_user_low_ship.tar
CP_G950FXXU1CRAP_CP8821295_CL12993647_QB16754748_REV00_user_low_ship.tar
HOME_CSC_OXM_G950FOXM1CRAP_CL12993647_QB16754748_REV00_user_low_ship.tar
This is the error I get on Odin:
Code:
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 5869 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> cm.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Before I also got a "device 2 binary 1 error" and once a "device 3 binary 1 error" while flashing, on the download screen, now I can't get it anymore.
I used Odin 3.13.1 and Prince Comsy Odin, none of those two worked.
I have no access to the recovery or the system.
What is going wrong?
Click to expand...
Click to collapse
Does your current firmware say U2?
The "CRAP" firmware you mentioned says U1 and I read somewhere you can't fallback from U2 to U1
Tried rooting this device (SM-G950F, 3 UK carrier logo), USB Debugging On, OEM Unlock On, odin successfully installed TWRP 3.3.1-1. Device restarted and since then does not go beyond Samsung logo. Can't go into recovery, can't shutdown the phone. Only goes into download mode. Googled and found a way to flash AQF7 BL, did flash it successfully with odin but still the same stuck at boot screen.
Here is what I tried so far;
Tried flashing TWRP older version 3.1.1-2
Tried flashing AQF7 Bootloader (BL_G950FXXU1AQF7_CL11544126_QB13847492_REV00_user_low_ship.tar)
Odin says successful install for both but can't get past boot screen.
Should I try flashing AQF7 firmware now? (downloading anyway). I would've tried it without asking but seen people doing it and still stuck at the same situation.
ODIN Log for TWRP flashing:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1207)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
ODIN Log for BL Flash
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1207)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> param.bin
<ID:0/006> up_param.bin
<ID:0/006> cm.bin
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
What if you try latest BTU firmware (CP/BL/AP/CSC) and then flash TWRP, untick autoreboot and try again? Is what comes to my mind atm
Well finally managed to flash a firmware... all is good. Phone is rooted now. All I wanted to do is to change the imei of this device. Installed Xposed firmware and the module (IMEI Changer). Imei changed as well, but when I put a sim it say not registered to network. Xposed IMEI changer says that its a software exploit and in Pakistan, the telecom authority has blocked all the imported phones (asking ridiculous amount as customs duty). Now I am not sure if the phone is carrier locked or locked by PTA (Pakistan Telecommunication Authority).
I apologize for the thread itself. It was more like a panic thread. Mods, would you please delete the thread, or if it doesn't bother anyone then someone please help me resolve this issue. PTA blocks the unregistered imei. This device is blocked and I have no idea how they do it. Youtube videos claims that imei changer works and changes the imei that PTA reads and unblocks the phone, but still not sure as I've successfully changed the imei.
Thanks.
I've been gone for awhile. I've always been rooted until I got a phone that couldn't be so that made me less active on here. Then that phone broke and I got an Iphone given to me. I won't be getting another Iphone. That wasn't fun for me. Now I'm back at it with a phone that can be rooted and is already rooted but I can't get to the next step for some reason. The problem I'm having is that I can't get odin to flash TWRP for nothing. Here is my log if that helps. Just give me advise and I'll see what I can do here.
I'm doing all I can to get xposed on this phone so I can get those handy dandy addons.
In recovery mode it says I have the ''heroqltevzw''. I tried using google I even looked on here but I can not find any information about ''heroqltevzw''. It's either heroqltechn or herolte.
Using Odin3 v3.12.7. Used A Few Others But It All Gives Me The Same Problem.
Some info about my phone.
Model Number: SM-G930V (VERIZON)
ANDROID vERISON: 8.0.0 (OREO)
Build Number: R16NW.G930VVRU4CRE5
Debugging Is Enabled And So Is OEM Unlock.
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1207)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
In recovery mode it says ''heroqltevzw''
TylerMarshall256 said:
I've been gone for awhile. I've always been rooted until I got a phone that couldn't be so that made me less active on here. Then that phone broke and I got an Iphone given to me. I won't be getting another Iphone. That wasn't fun for me. Now I'm back at it with a phone that can be rooted and is already rooted but I can't get to the next step for some reason. The problem I'm having is that I can't get odin to flash TWRP for nothing. Here is my log if that helps. Just give me advise and I'll see what I can do here.
I'm doing all I can to get xposed on this phone so I can get those handy dandy addons.
In recovery mode it says I have the ''heroqltevzw''. I tried using google I even looked on here but I can not find any information about ''heroqltevzw''. It's either heroqltechn or herolte.
Using Odin3 v3.12.7. Used A Few Others But It All Gives Me The Same Problem.
Some info about my phone.
Model Number: SM-G930V (VERIZON)
ANDROID vERISON: 8.0.0 (OREO)
Build Number: R16NW.G930VVRU4CRE5
Debugging Is Enabled And So Is OEM Unlock.
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1207)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
In recovery mode it says ''heroqltevzw''
Click to expand...
Click to collapse
Bootloader is locked down tight. You can't flash TWRP on this phone.
landshark68 said:
Bootloader is locked down tight. You can't flash TWRP on this phone.
Click to expand...
Click to collapse