Database Users

[Q] NC4 Eclipse Flash

Hi there,
I really need a quick few minutes of help. I began the night last night by trying to upgrade safestrap from 3.72 to 3.75, for what I later learned to be for no good reason. Anyway, I ended up wiping my entire internal storage including the root files, which forced me to odin back to MJE from NC2. So then I installed MJE and let the system upgrade to NC4. Then I proceeded to root and safestrap my system with success (including installing busybox). I then rebooted into recovery and flashed the Eclipse rom (I've tried stock and Rom-Slot1) and then rebooted into download mode and Odin'ed the NC2 kernel, which results in a fail every time. The odin log says it falis after aboot.mbn every time.
Please consider helping me!
Thanks!
P.s. This is the odin fail log.
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> NON-HLOS.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

[Q] How to root N9005 Lollipop N9005XXUGBNL8?

Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My Phone N9005 and Lollipop 5.0 N9005XXUGBNL8 installed.
Odin when I go to install v3.10 twrp or CR with getting the above error.
Debugging active.
I run the Odin as administrator.
"Auto reboot" and "Reset time" marked.
V3.7 I get the same error message.
Please help me?

In lollipop u can just install cwm
Auto reboot don't mark

freegalaxy said:
In lollipop u can just install cwm
Auto reboot don't mark
Click to expand...
Click to collapse
I use TWRP 2.8.10 recovery it work very well
auto reboot check

ZeoN1907 said:
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My Phone N9005 and Lollipop 5.0 N9005XXUGBNL8 installed.
Odin when I go to install v3.10 twrp or CR with getting the above error.
Debugging active.
I run the Odin as administrator.
"Auto reboot" and "Reset time" marked.
V3.7 I get the same error message.
Please help me?
Click to expand...
Click to collapse
use odin 3.09
search and download CF-Auto-Root-hlte-hltexx-smn9005
and put it in AP amd flash wait 2 minutes and done
i just did this today and it worked

cybertron_001 said:
use odin 3.09
search and download CF-Auto-Root-hlte-hltexx-smn9005
and put it in AP amd flash wait 2 minutes and done
i just did this today and it worked
Click to expand...
Click to collapse
Odin on my pc doesn't has AP, it has PDA instread, so it works the same way?

thahim said:
Odin on my pc doesn't has AP, it has PDA instread, so it works the same way?
Click to expand...
Click to collapse
Same they are. AP = PDA. The term AP was introduced from Odin 3.09 I think, all the prior versions of Odin have PDA labelled instead of AP.

Stuck in bootloop from trying to downgrade from 5.0 to 4.2

As the title says, I tried to downgrade from lollipop 5.0 to 4.2 because I've had several issues and I also wanted to get root. I think part of my mistake was I wiped data/factory reset before I flashed AP. Any help would be much appreciated, as I have been at this for the past five hours. I added some info below that might help below. Thanks
- I cannot boot into recovery and get the message (Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again)
- CP is the only thing that will flash and CSC also fails
- model number is g900a AT&T
- I have used Odin 3.10.7 and 3.09, but no luck
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> persist.img.ext4
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Did you try to repair him via kies?Maybe would help.
Sent from my D6503 using Tapatalk

Hey I have also experienced the same thing before, I was panicking that time, so I fixed it by flashing the old zip file, if that does not work try following the instructions your phone gave eg. Go to kies

VoltexYT said:
Hey I have also experienced the same thing before, I was panicking that time, so I fixed it by flashing the old zip file, if that does not work try following the instructions your phone gave eg. Go to kies
Click to expand...
Click to collapse
Kies and kies3 are both not recognizing my device. I heard it could be because of usb debugging, but I can't boot into my phone to check.

Allek84 said:
Did you try to repair him via kies?Maybe would help.
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Both kies and kies3 are not recognizing my device.

[Need Help] G935A Bootloop

Now I've searched just about all of Google on this, but I haven't been able to find a solution yet. Everyone here seems to know the most about this kind of stuff so I figured I'd make an account and explain my situation.
Backstory / How it happened
So, earlier today I figured I'd root my AT&T S7 Edge, I used a tutorial from Max Lee (I can't post links yet but if you need to find it I'm sure you can Google it) to get the job done, and after a while I managed to get the thing rooted. I knew absolutely nothing about what the hell flashing, roms, bricked phones, bootloops etc. were and now I only know a bit about them. So the phone was rooted just fine, I had SuperSU running, and a few other root apps, but then I figured I'd install xposed installer. So I went ahead and downloaded the wrong version (whoops) and it installed its framework and then said it needed to reboot my phone, low and behold we have a bootloop. It stays at the AT&T logo indefinitely if I'd let it. I'll happily admit to that being completely my mistake, I read the warning that it may cause a bootloop but I went ahead and installed it anyway thinking I could fix it if it happened. (This thread is my walk of shame I suppose)
Solutions I've tried
Now that the background has been explained, I'll go through the list of solutions I've tried, mind you I'm no expert at any of this so some of the info I give may seem redundant or nonsensical.
- Rebooting into recovery and clearing cache and factory resetting in every order you can imagine
* Only interesting thing I could find is that it still says custom on both the download mode (the one where you press vol down, power, and home) and when you reboot the phone and it goes through the initial animation, it shows custom with a little settings-looking icon just before it goes through the AT&T animation and takes a **** on my self esteem.
- Waiting ~1 hour for the AT&T logo to change to something other than an AT&T logo (I was desperate)
* Yeah nothing came out of that one...
- Flashing every stock firmware I could find on the internet, with every version of Odin I could find.
* Kept getting the same error, "FAIL! (Auth)". I looked it up and all I found was old threads from 2013 on the Galaxy S4, with some now-irrelevant information, I couldn't seem to get it to work, but I'm positive that's what I need to do unless you guys know another solution. Here's the full log:
Code:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Don't know what I did but after that at the download screen it says at the top left "SW REV CHECK FAIL : [aboot]Fused 4 > Binary 2
Sorry for the wall of text, I tried to format it as nicely as possible to make it somewhat readable. If anyone needs more info let me know.

Can you flash TWRP? If you can maybe you can boot into TWRP and then try to flash any rom from XDA and see if it comes alive...

alehawk said:
Can you flash TWRP? If you can maybe you can boot into TWRP and then try to flash any rom from XDA and see if it comes alive...
Click to expand...
Click to collapse
Thank you for the response
I've tried getting TWRP to work, but apparently there still isn't a way to get it working on the AT&T, I was under the impression that it was only for international and Korean versions. I haven't been able to find any version of TWRP that works for my device.
However I just did try some newer stock firmware from, "theandroidsoul" which partially worked, being that I'm desperate and don't know what I'm doing I just tried flashing all three:
G935AUCS4API2 - This one worked more than the others, but it seems at some point it disconnects for whatever reason, causing it to fail. After that my phone gave me the whole "You messed up go use smart switch" deal, and smart switch was saying my device was unsupported. That said I'm not sure what is causing the fake USB disconnect cause I can hear the windows sound for the USB disconnecting, but I'm not sure why.
Here's the log:
Code:
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> xbl.elf
<ID:0/005> tz.mbn
<ID:0/005> hyp.mbn
<ID:0/005> devcfg.mbn
<ID:0/005> pmic.elf
<ID:0/005> rpm.mbn
<ID:0/005> cmnlib.mbn
<ID:0/005> keymaster.mbn
<ID:0/005> apdp.mbn
<ID:0/005> msadp.mbn
<ID:0/005> cmnlib64.mbn
<ID:0/005> sec.dat
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
And here's the log after another try (I factory reset and wiped cache again to give it another go)
Code:
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> xbl.elf
<ID:0/005> tz.mbn
<ID:0/005> hyp.mbn
<ID:0/005> devcfg.mbn
<ID:0/005> pmic.elf
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I found it interesting that it got even less far than before.
G935AUCS2APH1 - Stopped at lksecapp.mbn then went to FAIL! (Auth). There was no disconnect or reconnect
G935AATT2APG1 - Same as above

I seem to be stuck in a similar situation. Did you ever find a fix?

wunderkinder said:
I seem to be stuck in a similar situation. Did you ever find a fix?
Click to expand...
Click to collapse
I had the at&t s7 edge before and had the same problem but not sure if it was the same odin error.
But this is how you flash a stock rom on the at&t:
-You must use the princecomsy odin (search for it on google)
-Here is the stock rom with the latest security update (type "G935AUCS4BRA1" in the google search bar)
(I wasn't allowed to post links)
unzip and flash
tell me how it goes

S8 G950F Bricked

Hello Guýs,
Iam helpless and dont kow what to do right now. I got me TWRP and wanted to install a Rom but i bricked my phone i guess.
Iam trying to get back to stock rom with Odin 3.12.3 but i always get fails. I got a new PIT file with odin.
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Removed!!
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any tipps would be very helpfull to me.
p.s. if i check the re-partition box i dont get any connection.
p.s.s. i have no kies but the Samsung USB Drivers installed

Michel93 said:
Hello Guýs,
Iam helpless and dont kow what to do right now. I got me TWRP and wanted to install a Rom but i bricked my phone i guess.
Iam trying to get back to stock rom with Odin 3.12.3 but i always get fails. I got a new PIT file with odin.
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Removed!!
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any tipps would be very helpfull to me.
p.s. if i check the re-partition box i dont get any connection.
p.s.s. i have no kies but the Samsung USB Drivers installed
Click to expand...
Click to collapse
kies is useless. your drivers are properly installed if Odin recognizes your device.
Download Odin 3.13.1 and try it again

Thanks I'll try when I am back home. I Cann only access download mode BTW. Else I stuck in a boot loop with this blue installing update screen.

Michel93 said:
Thanks I'll try when I am back home. I Cann only access download mode BTW. Else I stuck in a boot loop with this blue installing update screen.
Click to expand...
Click to collapse
as long as you can get to download mode, youre in good shape. From there, its merely a try-and-fail process of different Odin and firmware versions

Ty I was getting pretty despred after hours of fails and disappointment

Michel93 said:
Ty I was getting pretty despred after hours of fails and disappointment
Click to expand...
Click to collapse
it can get that way especially if youre downloading your firmwares from sammobile.com/firmwares directly. Takes FOREVAAAAAAR and then when it fails it gets SUPER irritating. Get the Frija firmware download tool here and the speed difference will blow you away. There is another firmware download tool out there too and i have it on my computer at home, but i cant remember what its called and the Frija tool is as good as that other tool anyways.

youdoofus said:
kies is useless. your drivers are properly installed if Odin recognizes your device.
Download Odin 3.13.1 and try it again
Click to expand...
Click to collapse
got the same problem with 13.1
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5582 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

HELL YEAH!!!
i think i got it!
I used the Firmware from "Frija", Odin 3.13.1 and a PIT-File from https://zfirmware.com/download-samsung-galaxy-s8-g950f-pit-file/.
The Problem with the connection was i had to enter Download Mode every time new an had to do the Pit with the Firmware together.
Thanks for ur help!
I will stay active here and try to helb other poor guys like myself.

Michel93 said:
HELL YEAH!!!
i think i got it!
I used the Firmware from "Frija", Odin 3.13.1 and a PIT-File from https://zfirmware.com/download-samsung-galaxy-s8-g950f-pit-file/.
The Problem with the connection was i had to enter Download Mode every time new an had to do the Pit with the Firmware together.
Thanks for ur help!
I will stay active here and try to helb other poor guys like myself.
Click to expand...
Click to collapse
right on, right on! yeah if you can get to download mode, youre usually good. From there its just getting the right Odin/firmware combo. Same holds true on 90%+ of most newer samsung phones