I used my phone until it died. I've never done that before but now all of a sudden since that time it will not charge. Ive tried multible batteries. The phone is working totally the same as before and works fine, but it will not charge. is this common ?has anybody heard of this? Thanks
Most likely your charging port is broken. Have you tried a back cover with wireless charging?
Related
I've been using wireless charging at home and work for over a month and love it. But it stopped working a few days ago, and the device no longer detected when placed on a wireless charger. Then it worked sporadically for a day, and now it's dead again. Any suggestions or diagnostics I can run to figure out if it is a hardware or software issue? TIA
Sorry to ask ... but it could be the charger itself ?
I have a cheapo charger and it can act up sometimes. Luckily, it has a LED ... if the light stays on after I remove the phone then I
will need to reset the charger (or it won't charge the phone next time).
I don't think it is the chargers, since the phone started failing on both at the same time and the Nexus 7 still charges fine on the one I have at home. I wonder if there is a software setting to turn wireless charging on/off or something?
I think that the problem may have been static for some reason. I have found that rubbing the back of the phone with a cloth (my shirt) before putting it on the wireless charger gets it to work. This holds true with or without bumper case on the phone, and works for my home and office chargers. Strange.
Last week my phone started not charging properly, with the charging cable plugged in it would seem to randomly stop and then start charging again. I tried a few different chargers and it was the same, sometimes it would charge and others times not, but eventually it stopped charging all together and the battery died.
I thought the charging port might have gone faulty, so I ordered a new one and replaced it, but it still didn't charge. So, I bought a new battery and tried that, the phone booted up fine and worked but again, it still wouldn't charge.
I'm assuming something must be broken on the motherboard, but I don't really want to spend any more on it and the phone is out of warranty,so I just wondered if anyone had any other suggestions I can try before I have to sell it for parts?
Cheers
IDK but maybe small smd fuses..
_____________________________________Read more write less and be smart
Recently my OP2 doesn't seem to charge properly. Meaning...with the USB cord connected to the base it charges for a min then stops. The light stays on as if it's charging but it's not. I have to unplug it and plus it back in and it's fine for a few min then it stops and I have to do it again. This just started happening. I haven't dropped it or anything. The charge port is fine. Anybody else have this problem or HAD this problem...any info would help...
I have this exact same problem with my less than a week old OPT. I think its the charging cable gone bad. Using Ampere to check the charging current, I find that it never goes over 200ma and after about a minute (or lesser) disconnects because the software cuts it off when the current is too low. For now, charging with the phone turned off works, since no software to cut off the charger, but I do not know if this is bad for the battery. I am trying to find another Type C cable now, see if I can confirm this. Will post back if I do.
UPDATE: Was the cable. Friend's xiaomi cable worked perfectly and charged my phone back to 100% while I had dinner. Amazon is giving me a free replacement, so not complaing too much ...
Lately I've been having issues with my phone and charging. It started with the stock OEM charger getting steadily harder and harder to use.. so I bought an Aukey charger to replace it with and it completely refuses to work on my phone, so I tried another phone and tablet and it works great. I tried my super old Galaxy note 2 charger with a motorola usb cable from my maxx and it works fine... I then tried that usb cable on the aukey QC 2.0 charger and it won't work... tried the same cable again on my phone with the sammy charger and it worked... tried a QC 3.0 aukey wall charger and it won't work... yet I have a QC 2.0 incipio car charger. it was working with the USB moto cable I've had in my car since I got my Bionic... then it just stopped charging my phone, got a new USB and it works great now except the moto usb will work for friends, just not my phone.
I have absolutely no idea what's causing this... I thought maybe there was lint in the charging port so I took a tootpick and cleaned it out, got a small piece of lint, same thing with all the chargers. I can't find anything online, and being a tinkerer I've tried everything I can think of before asking. I'm starting to think the phone itself is having problems and the port is actually bad or there's something wrong in the software causing it to have problems with turbo or QC chargers.
any ideas?
There is a general inconsistency with this device and Quick Chargers... if you look in the Accessories area there are several threads discussing it.
Personally, I use the Aukey QC 2.0 charger for travel with an Eversame premium braided cable and it works fine, yet others use the same combination and it won't Turbo charge or in some cases charge at all.
I also face the same issue. Some USB cables work with my Moto X Style and some doesn't .
i am having an even worse issue and i am sure its a software problem, recently my moto x stopped charging using the moto charger so in the last two months i have 4 different chargers who worked for some time each now it just doesnt work at all, i have cleaned the port numerous times then it just stopped working so when the phone finally died all of a sudden it started charging but as soon as it switched to turbo mode the charge would stop and start over again. i have deduced its a software problem as once the phone tries to go to turbo charging mode it cant sustain the charge and cancels it. amphere even shows its discharging while on the charger , however if it starts charging while the phone is off with a low voltage adapter and turn on the phone once you dont remove the cable it will charge (extremely slowly but it will charge).
redtrinstar said:
i am having an even worse issue and i am sure its a software problem, recently my moto x stopped charging using the moto charger so in the last two months i have 4 different chargers who worked for some time each now it just doesnt work at all, i have cleaned the port numerous times then it just stopped working so when the phone finally died all of a sudden it started charging but as soon as it switched to turbo mode the charge would stop and start over again. i have deduced its a software problem as once the phone tries to go to turbo charging mode it cant sustain the charge and cancels it. amphere even shows its discharging while on the charger , however if it starts charging while the phone is off with a low voltage adapter and turn on the phone once you dont remove the cable it will charge (extremely slowly but it will charge).
Click to expand...
Click to collapse
FYI... There is no software problem with charging, if there was it would affecting hundreds of thousands of people. And I doubt you have 2 software problems, a bad kernel and a bad bootloader/recovery image, because 2 different things control charging when powered on and powered off.
Issue here is you likely have a high resistance connection somewhere between the USB port and the battery itself, or a bad charging circuit... It's hardware.
while i can understand where you are coming from when the phone is in factory mode (motorola customer care told me to try) its charging fine also turbo charging is working now just it doesnt recognize the sim card. it was a suggestion from Motorola customer service desk, as i live outside of the us they gave me some options to try. they said it was a software glitch where the phone may have gotten an overload from a bad connection and caused the phone to not recognize the charger. however while the phone is off this check is not performed which is why i was getting a lower amp charger to work as the phone did not have to enable the protocol that allows for quick charge/turbo charge voltages.
Hi,
I have a pretty new Motorola G8 that unfortunately I dropped into water.
I got it out immediately and it seemed fine.
Soon after I charged it overnight and it got to 100% but in the morning I noticed that when connected to the charger it was very, very hot.
When I unplugged it the temperature went to normal and the phone worked ok, but now it won't charge anymore.
I have turned if off an on again, used a different socket for the charger, tried a different charger etc - nothing.
The one thing I cannot try is chanigng the cable as it uses a USB-C cable and I have only got one of these.
Anyone with an idea of what else I could try or what the problem might be?
Is is possible that there was still moisture inside and that charging it "moist" could have damaged the battery?
Many thanks!