After using my cool1 for a month with no problems i decided to flash JUI 7.0.1 (with gapps etc...) on my Cool1 via TWRP but after doing it i realized it has many bugs and apps doesn't work properly. So i decided to return to EUI. After flashing the original stock firmware and rebooting the phone automatically switched off.
Power button not working, i cannot get into recovery and i tried all combinations of buttons without success.
When i connect it to the computer the red led start glowing and my computer recognizes it ONLY in Device Manager as QUALCOMM HS-USB Diagnostic 900E (COM3).
i have all the latest drivers installed.
i tried QFIL and it also recognizes it as QUALCOMM HS-USB Diagnostic 900E (COM3) and after setting everything when i click "Download" i get this error:
Start Download
COM Port number:3
Switch To EDL
Download Fail:Switch To EDL FailFailed to Switch to Emergency Download mode
Finish Download
Click to expand...
Click to collapse
MiFlash doesn't recognize the phone so nothing to do
Coolpad Download Assistant doesn't recognize the phone.
YGDP not working
to flash a new rom i need the phone to go into QUALCOMM HS-USB QDLOADER 9008 MODE but i tried everything installed the latest drivers even bought a 10$ EDL CABLE from amazon still not working always show me QUALCOMM HS-USB Diagnostic 900E
Any suggestion that would help, please... I think it's hard bricked because it cannot get into recovery nor the fastboot mode. completely dead only Red led glowing and QUALCOMM HS-USB Diagnostic 900E (COM3).
Thank you
hi
i installed custom recovery to cool 1 c 103
after it finished model number changed to 106
what i have to do?????
So nobody could help?
hello. probably you wipe system. .. or i dont know..but try this:
Forced writing a recovery mod using QFIL.exe:
a) open program qfil.exe
b) choose the recovery folder and xml file
(remember: for writing succes recovery you need type this command in cmd: BCDEDIT.EXE –SET TESTSIGNING OFF)
c) plug the phone
d) now. most important: Hold Volume up , Volume Down and Power Button At same time. and - always press the button
if not working : first d) and then c) steps.
if the qfil.exe read the phone hold continues button.
e) press download button on qfil.exe
Now in this moment you have a recovery mod.
This method it worked for me
So now you need a flash a rom.
I dont understand why after flash some room(miui 8, 9, etc) my phone did not open..
maybe some rom dont have a kernel
so.. i flash the jui 7 by cuoco and my phone its a live ()
now you can try flash now room (I'm not sure if it will work as I did not try)
1. wipe data and cache
2) flash new rom
edit: dont work flash any rom after flashed jiui..i dont know why......
Edit2: for change jui to eui watch this:
https://youtu.be/oPB1izX4Plo
Good luck:good:
Bogdanm997 said:
hello. probably you wipe system. .. or i dont know..but try this:
Forced writing a recovery mod using QFIL.exe:
a) open program qfil.exe
b) choose the recovery folder and xml file
(remember: for writing succes recovery you need type this command in cmd: BCDEDIT.EXE –SET TESTSIGNING OFF)
c) plug the phone
d) now. most important: Hold Volume up , Volume Down and Power Button At same time. and - always press the button
if not working : first d) and then c) steps.
if the qfil.exe read the phone hold continues button.
e) press download button on qfil.exe
Now in this moment you have a recovery mod.
This method it worked for me
So now you need a flash a rom.
I dont understand why after flash some room(miui 8, 9, etc) my phone did not open..
maybe some rom dont have a kernel
so.. i flash the jui 7 by cuoco and my phone its a live ()
now you can try flash now room (I'm not sure if it will work as I did not try)
1. wipe data and cache
2) flash new rom
edit: dont work flash any rom after flashed jiui..i dont know why......
Good luck:good:
Click to expand...
Click to collapse
I've flashed the recovery mode but my phone is not opening can you help me ? :crying:
silentzer14 said:
I've flashed the recovery mode but my phone is not opening can you help me ? :crying:
Click to expand...
Click to collapse
Edit 3: To change EUI to JUI or viceversa You need use Coolpad download assistant
I found a video yt, link bellow.
Hi, but recovery mod is working? Press Vol up + Power Button to Enter in recovery.
If recovery work, You can flash a rom . Jui or eui.
More details please and i try to help You.
Edit:
Or write rom with coolpad download assistant:
https://youtu.be/oPB1izX4Plo
After You can install recovery
Edit2: I recomanded install trwp 3.1.x.x by @Cuoco92
And then You can Root the phone. (Install magisk or SuperSU from recovery)
Bogdanm997 said:
Edit 3: To change EUI to JUI or viceversa You need use Coolpad download assistant
I found a video yt, link bellow.
Hi, but recovery mod is working? Press Vol up + Power Button to Enter in recovery.
If recovery work, You can flash a rom . Jui or eui.
More details please and i try to help You.
Edit:
Or write rom with coolpad download assistant:
https://youtu.be/oPB1izX4Plo
After You can install recovery
Edit2: I recomanded install trwp 3.1.x.x by @Cuoco92
And then You can Root the phone. (Install magisk or SuperSU from recovery)
Click to expand...
Click to collapse
I have fixed the device but the only problem now is I don't have any signal. Simcards are detected but no Network at ALL, I tried to Fix my IMEI but still the same, do you know how to fix it ?
I also tried to reflash the rom through TWRP still the same -_-
realblackyz said:
After using my cool1 for a month with no problems i decided to flash JUI 7.0.1 (with gapps etc...) on my Cool1 via TWRP but after doing it i realized it has many bugs and apps doesn't work properly. So i decided to return to EUI. After flashing the original stock firmware and rebooting the phone automatically switched off.
Power button not working, i cannot get into recovery and i tried all combinations of buttons without success.
When i connect it to the computer the red led start glowing and my computer recognizes it ONLY in Device Manager as QUALCOMM HS-USB Diagnostic 900E (COM3).
i have all the latest drivers installed.
i tried QFIL and it also recognizes it as QUALCOMM HS-USB Diagnostic 900E (COM3) and after setting everything when i click "Download" i get this error:
MiFlash doesn't recognize the phone so nothing to do
Coolpad Download Assistant doesn't recognize the phone.
YGDP not working
to flash a new rom i need the phone to go into QUALCOMM HS-USB QDLOADER 9008 MODE but i tried everything installed the latest drivers even bought a 10$ EDL CABLE from amazon still not working always show me QUALCOMM HS-USB Diagnostic 900E
Any suggestion that would help, please... I think it's hard bricked because it cannot get into recovery nor the fastboot mode. completely dead only Red led glowing and QUALCOMM HS-USB Diagnostic 900E (COM3).
Thank you
Click to expand...
Click to collapse
Turn off your phone then
Insert the Cable
Hold "VOLUME UP + DOWN + POWER BUTTON" wait until the 4th beep sound Then try to flash again.
I didnt get this problem, I dont know exactly how to fix, but try:
https://youtu.be/9mbNvItVg78
https://youtu.be/8QZF_H_JNpA
silentzer14 said:
Turn off your phone then
Insert the Cable
Hold "VOLUME UP + DOWN + POWER BUTTON" wait until the 4th beep sound Then try to flash again.
Click to expand...
Click to collapse
Unfortunately it isn't working just tried
Try Vol Up + Down + Usb Cable , to get into 9008 Mode.
dwaipayan774 said:
Try Vol Up + Down + Usb Cable , to get into 9008 Mode.
Click to expand...
Click to collapse
USB cable?sorry What's 9008 mode..
bigdoomzoe said:
USB cable?sorry What's 9008 mode..
Click to expand...
Click to collapse
Qualcomm HS- Usb 9008 mode .
Press vol up and down and plug in the usb cable while connected to PC.
What program is needed for the computer
bigdoomzoe said:
What program is needed for the computer
Click to expand...
Click to collapse
---------- Post added at 08:43 AM ---------- Previous post was at 08:42 AM ----------
bigdoomzoe said:
What program is needed for the computer
Click to expand...
Click to collapse
QFIL or HQXA
This will unlock my network
I try it but when i do the recovery mode only the red light is working the phone isn't vibrate and nothing so i tried to do it in the YGDP tool and isn't working too are you know anoyher way ?? :crying:
Boulfalxd said:
I try it but when i do the recovery mode only the red light is working the phone isn't vibrate and nothing so i tried to do it in the YGDP tool and isn't working too are you know anoyher way ?? :crying:
Click to expand...
Click to collapse
Try QGDP. On my Pc my phone is not detected by YGDP ,but I can flash stock ROM with QGDP.You can flash with QGDP , without even turning on the phone.Add the CPB file in QGDP, click start, and then plug in phone while switched off(no need to press any button)
Man you're my hero ;b
Boulfalxd said:
Man you're my hero ;b
Click to expand...
Click to collapse
If you were able to flash Stock ROM,then Congratulations.
Related
Hello guys, I have a problem with this phone.
First I flashed the euro+fastboot kdz... The phone booted and worked awesome but It wasn't showing recovery or LG logo.
Somewhere on this forum I read that you had to flash v10c and then v20B to fix this.
I did so, v10c failed, but v20B flashed correctly, but it didn't boot up.
I'm still stuck here, the phone is completely dark, but when I connect it to the pc I can see it with ADB, It just doesn't go into fastboot mode (because of v20B I guess). But flashing the euro kdz won't work anymore, and I'm stuck in ADB without fastboot.
Hope you guys can help me,
Juxter.
Juxter said:
Hello guys, I have a problem with this phone.
First I flashed the euro+fastboot kdz... The phone booted and worked awesome but It wasn't showing recovery or LG logo.
Somewhere on this forum I read that you had to flash v10c and then v20B to fix this.
I did so, v10c failed, but v20B flashed correctly, but it didn't boot up.
I'm still stuck here, the phone is completely dark, but when I connect it to the pc I can see it with ADB, It just doesn't go into fastboot mode (because of v20B I guess). But flashing the euro kdz won't work anymore, and I'm stuck in ADB without fastboot.
Hope you guys can help me,
Juxter.
Click to expand...
Click to collapse
Try again.
First refer to this thread:
dont see recovery and boot logo - http://forum.xda-developers.com/showthread.php?t=825173
And the original post by: Feuerbard
#22 - http://forum.xda-developers.com/showpost.php?p=9457010&postcount=22
Thumbs up solution to get logo
solution from 4PDA
flash first french firmware _hxxp://csmg.lgmobile.com:9002/swdata/WEBSW/GT540/ANEUBK/V20a_00/V20A_00.kdz
(you must make kdz flasher fullscreen and change right option to CS_EMERGENCY)
dont boot android , remove accu reinsert them and press vol - and plug usb cable into port on mainboard - you must get in download mode )
flash firmware with fastboot (i use CIS _hxxp://narod.ru/disk/26675062000/V20B_00.kdz.html)
boot android and flash this firmware _hxxp://narod.ru/disk/25473801000/out.kdz.html
after this you must see all logo ( LG , Motion LG , Android )
after this flash firmware you like (custom fastboot e t с)
maybe some point is not needed but this tutorial work 100% and tested by myself
Click to expand...
Click to collapse
And the post by namco:
in post -- #45 - http://forum.xda-developers.com/showpost.php?p=10241289&postcount=45
namco said:
So after 4 5 6 or maybe 10 times, it will finally become working, that's what you're saying?
This is really odd, something's wrong with these phones lol
Okay, i'll load myself with a ton of patience and repeat the steps as per the instructions. This is *exactly* how i am doing it, with all the details:
1) Using the French v20A ROM - http://csmg.lgmobile.com:9002/swdata/WEBSW/GT540/ANEUBK/V20a_00/V20A_00.kdz and this Russian one - http://narod.ru/disk/25473801000/out.kdz.html
2) Take out the battery, SIM card and SD card
3) While holding the Vol - button, plug USB into phone so that the phone goes into Download Mode
4) Run the KDZ Updater, put it into CS_Emergency mode
5) Select the French V20A rom and flash it
6) When it's finished (immediately after the DOWNLOAD MODE letters vanish), i pull out the USB plug from the PC, so that the phone doesn't boot.
7) Again hold Vol - and reinsert USB to put the phone back in Download Mode
8) In KDZ Updater (still in CS_Emergency mode) select out.kdz and flash it
9) Let the phone boot into Android
At this point i STILL don't have a boot animation, should i keep doing this until i see one appear?
When it (if) finally appears, i just flash my own ROM, do a factory reset and it should stay that way, correct?
I guess my impossibility to access recovery mode also has something to do with this...
Click to expand...
Click to collapse
Note: For above step: 1) Using the French v20A ROM
-- as long as you have the ROM of v20 with fastboot option, it doesn't really matter.
================
For out.kdz file alternate download link by fisher:
#59 - http://forum.xda-developers.com/showpost.php?p=10426771&postcount=59
Originally Posted by fishears
Try this:
http://www.mediafire.com/?u2mhgrbva8dr5cm
================
Hope this helps.
Thanks for the reply, I actually fixed it following this:
hxxp://modaco.com/topic/329863-how-to-raise-gt540-from-the-dead/
Once I got fastboot with that cwm.kdz I reflashed a fastboot rom, and from that one I could use the KDZ updater again, following the French kdz procedure...
The phone now is fully working recovery and bootanimations again
How to install CWM Recovery without USB Debugging enabled on LENOVO A6000 Plus?
I've tried minimal adb & flashboot, but it failed.
NB : My phone is soft bricked after installed system update on my rooted lenovo a6000 Plus. [Update kraft-a6000-s_s010_150515]
Please, help me. :crying:
query
I am also having the same problem......
can anyone help?
please plesae
vokkus kreatif said:
How to install CWM Recovery without USB Debugging enabled on LENOVO A6000 Plus?
I've tried minimal adb & flashboot, but it failed.
NB : My phone is soft bricked after installed system update on my rooted lenovo a6000 Plus. [Update kraft-a6000-s_s010_150515]
Please, help me. :crying:
Click to expand...
Click to collapse
Same here...
Did you find any solution
lenovo a60000 ran into problem
hi my lenovo a60000 ran into problem it just vibrates and shows lenovo
start screen and not going anywhere from there,its not even going into
recovery mode,even when i connect to pc it doesn't show up there too,is
there any other alternative to fix it or is my phone cannot be
recovered,any help will really appreciate.
SAME same seems like there is no help out there and we might have to use our phones as paperweight!
hi bud your situation seems to be similar to mine here is how I was able to work out mine, go to boycracked webpage use this " boycracked How to Unbrick Lenovo A6000" In google (sorry I cannot add webpage due to restrictions) the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all
sp_grewal said:
hi bud your situation seems to be similar to mine here is how I was able to work out mine, go to boycracked webpage use this " boycracked How to Unbrick Lenovo A6000" In google (sorry I cannot add webpage due to restrictions) the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all
Click to expand...
Click to collapse
thanks a lot dude finally my phone got new life thanks to you and boycracked
Sent from my Lenovo A6000 using XDA Free mobile app
How to root Lenovo a6000 plus lollipop.I have upgraded from kitkat to lollipop now i unable to root my phone cause no kingroot,iroot,even minimal adb cwm also not working.and unable to flash kitkatrom also cause error aborted.
Please help me
vinod352 said:
Sent from my Lenovo A6000 using XDA Free mobile app
How to root Lenovo a6000 plus lollipop.I have upgraded from kitkat to lollipop now i unable to root my phone cause no kingroot,iroot,even minimal adb cwm also not working.and unable to flash kitkatrom also cause error aborted.
Please help me
Click to expand...
Click to collapse
1. Download custom recovery for lenovo a6000 lollipop, just googling "[A6000]TWRP-2.8.6.0_no_theme.img" (without quotes)
2. download installation zip of supersu from chainfire, just googling "BETA-SuperSU-v2.49.zip" (without quotes)
3. Enter to fastboot, type "fastboot boot [A6000]TWRP-2.8.6.0_no_theme.img" (without quotes) in cmd/terminal. wait for a moment... until your phone land on custom recovery (TWRP)
4. flash file "BETA-SuperSU-v2.49.zip".
Sent from my Lenovo A6000 using XDA Free mobile app
Bro Thanx for reply.I will try and I'll tell here if it success
Please help me my lenovo a6000 is not booting into system or recovery only fastest even after factory rest clear cache and dalvik installing stock rom ?
Thanks!
sp_grewal said:
hi bud your situation seems to be similar to mine here is how I was able to work out mine, go to boycracked webpage use this " boycracked How to Unbrick Lenovo A6000" In google (sorry I cannot add webpage due to restrictions) the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all
Click to expand...
Click to collapse
Thanks.
I did see the boycracked website but i couldn't get my deivce into 9008 mode..thanks a lot
Not able to enter the recovery
My phone is working perfectly(boots to system)...
but Im not able to go to recovery or reset the device...
BenNy tHa said:
My phone is working perfectly(boots to system)...
but Im not able to go to recovery or reset the device...
Click to expand...
Click to collapse
Flash stock recovery with fastboot
BenNy tHa said:
My phone is working perfectly(boots to system)...
but Im not able to go to recovery or reset the device...
Click to expand...
Click to collapse
Just flash a custom one... No image twrp recovery.. It's the only one working now.. You can get it just Google it
gks131 said:
Just flash a custom one... No image twrp recovery.. It's the only one working now.. You can get it just Google it
Click to expand...
Click to collapse
I tried its not working,after flashing when I reboot to recovery it stays @ the android logo page .
May be I'm not doing it properly.
Can u help me with the steps to do it??
BenNy tHa said:
I tried its not working,after flashing when I reboot to recovery it stays @ the android logo page .
May be I'm not doing it properly.
Can u help me with the steps to do it??
Click to expand...
Click to collapse
If you are on lollipop flash this one
http://www.mediafire.com/?7d6aoevnk52cg5i
Use fastboot flash recovery recovery.img
My phone does not reboot
batmanx0369 said:
hi my lenovo a60000 ran into problem it just vibrates and shows lenovo
start screen and not going anywhere from there,its not even going into
recovery mode,even when i connect to pc it doesn't show up there too,is
there any other alternative to fix it or is my phone cannot be
recovered,any help will really appreciate.
Click to expand...
Click to collapse
same problem ; please post if u have found a solution
kanna9999 said:
same problem ; please post if u have found a solution
Click to expand...
Click to collapse
Just use fastboot to flash twrp 3.0.0 by sevenmax (just Google it)
Command:
Fastboot flash recovery (then recovery name.zip or .img)
Then flash from it the rom you like
Sent from my GT-I9300I using Tapatalk
The help, please! Constantly continued bootloop
There is an insertion, the programmed equipment for FlashTool or Odin
Huawei G7_L01?
I can not come in Fastboot
download ur offcial rom and put in dload folder on ur sdcard. power off ur device and hold power + vol up + vol down and wait until the instalation finish and supposedly it will restored back ur bootloader
Ascend G7-L01 doesn't boot
Hi,
I have the same problem after upgrading my G7-L01 by putting dload in SDcard.
The MUI update started and finished 100% but the phone become bricked!
It is detected as "RELINK HS-USB QDLoader 9008 (Port16)".
I think that I must flash now with SP Flash Tool or other tool! But I didn't find a ROM for that (with scatter).
Thanks for help!
hosnix said:
Hi,
I have the same problem after upgrading my G7-L01 by putting dload in SDcard.
The MUI update started and finished 100% but the phone become bricked!
It is detected as "RELINK HS-USB QDLoader 9008 (Port16)".
I think that I must flash now with SP Flash Tool or other tool! But I didn't find a ROM for that (with scatter).
Thanks for help!
Click to expand...
Click to collapse
i have the same scenario. my phone still bricked. did find any solution to make it boot again ?
I was trying to update my Axon 7 Mini with an update zip from here https://www.ztedevices.com/en/support/detail?id=03743F4E761C475F838D444384791D36
Extracted the update.zip from the download. put the update.zip in the root of my sd card. Applied through recovery using sd card update. The phone accepted the file. Said it was successful. I wiped the cache partition and selected reboot system. The phone never turned on again. No signs of life whatsoever. Plugged into my desktop PC. Windows detects it but doesn't recognize it. I need some MAJOR help please.
Can you enter the recovery again by pressing volume up and power simultaneously? If not, then you will probably need to enter emergency download "EDL" mode and flash firmware using EDL Tool. Do you have an european version of phone? On my Axon 7 Mini I just upgraded directly from Marshmallow to Nougat without any problems.
So, how to enter the EDL mode, please look here:
https://forum.xda-developers.com/axon-7/how-to/guide-axon-7-universal-unbrick-t3814413
Maybe you will need the EDL cable or you can try this "DIY hack video". - I had also bricked phone and this video helped me a lot!
When the phone is in EDL mode then you will need the firmware and EDL Tool for flashing.
Good Luck!
Machi007 said:
Can you enter the recovery again by pressing volume up and power simultaneously? If not, then you will probably need to enter emergency download "EDL" mode and flash firmware using EDL Tool. Do you have an european version of phone? On my Axon 7 Mini I just upgraded directly from Marshmallow to Nougat without any problems.
So, how to enter the EDL mode, please look here:
https://forum.xda-developers.com/axon-7/how-to/guide-axon-7-universal-unbrick-t3814413
Maybe you will need the EDL cable or you can try this "DIY hack video". - I had also bricked phone and this video helped me a lot!
When the phone is in EDL mode then you will need the firmware and EDL Tool for flashing.
Good Luck!
Click to expand...
Click to collapse
Windows doesn't recognize it in through the usb drivers in EDL mode so idk if it can go into that mode manually. Definitely not by command prompt.
Hi all.
I´m still searching some way to solve my problem.
What´s happaned:
was on AEX OREO, make downgrade to SLIM stock 7.1 from raystef66 = all ok. But after a couple days made magisk upgrade to 17 via twrp and after that is "death"...when I try to start my phone I can see first ZTE logo, than 3x red led, that´s all, I think after flash stockrom I lost customrecovery......?.....t I can not start to TWRP, FASTBOOD...maybe EDL working but:
When I try combo+pwr I see DFU/com4 port. So I tried guidef from raystef66 with ZTE DFU_MultiDL_A2017X_Tool = apk see my phone but still in disconect mode(conect stat) but WIN see my phone as HS USB QDlouder 9008 com 8, now I run edl tool from djkuz.
Tool see my phone, name QUALCOM HS=USB QDlouader 9008 and I tried flash edl or recovery with error = from log:
Did not receive Sahara hello packet from device miflash says can not recivie hallo pocaked.
Any new idea how to fix...?
Thx!!
trying on WIN7 pro
kraljan66 said:
Hi all.
I´m still searching some way to solve my problem.
What´s happaned:
was on AEX OREO, make downgrade to SLIM stock 7.1 from raystef66 = all ok. But after a couple days made magisk upgrade to 17 via twrp and after that is "death"...when I try to start my phone I can see first ZTE logo, than 3x red led, that´s all, I think after flash stockrom I lost customrecovery......?.....t I can not start to TWRP, FASTBOOD...maybe EDL working but:
When I try combo+pwr I see DFU/com4 port. So I tried guidef from raystef66 with ZTE DFU_MultiDL_A2017X_Tool = apk see my phone but still in disconect mode(conect stat) but WIN see my phone as HS USB QDlouder 9008 com 8, now I run edl tool from djkuz.
Tool see my phone, name QUALCOM HS=USB QDlouader 9008 and I tried flash edl or recovery with error = from log:
Did not receive Sahara hello packet from device miflash says can not recivie hallo pocaked.
Any new idea how to fix...?
Thx!!
trying on WIN7 pro
Click to expand...
Click to collapse
First: did the DFU see a com port in the config?
You do have to select the com port manually.
Second: can you boot to FTM?
Third: try another Edl package, some Edl have to be installed as a backup restore not via a straight flashing.
thx for quick answer!
1 see pic pls, in DFU com4
2 no can not get to FTM
3 tried 3x another packages...see log/pic from ZTE EDL tool...
kraljan66 said:
thx for quick answer!
1 see pic pls, in DFU com4
2 no can not get to FTM
3 tried 3x another packages...see log/pic from ZTE EDL tool...
Click to expand...
Click to collapse
Use the latest MiFlash. I've been having trouble with EDL Tool lately. Maybe it'll work. z
I'm guessing the red LED turns off as soon as you connect MultiDL correctly?
Make sure Edl tool is in the root directory of you PC or laptop drive.
EG: C:\ or D:\ as per the instructions.
Make sure you run it as admin too.
If I remember correctly the full Edl package had to be placed into the appropriate folder as per instruction (via the tool) and on the post.
@Syberclone:
I have all as you write...in root, edl package is correct/about edl package edl tool says "success = tried 4different edl package for my phone"/
I´m convinced about a port problem, log from edl tool is:
15:47:25: INFO: User wants to talk to port '\\.\COM8'
ERROR
15:47:25: {ERROR: OpenPort:5198 Failed to open com port '\\.\COM8'
I´ll try another miflash but dont believe ...:-/
just used another PC with WIN7 and now.....CHEEEEERS!!!!!!
Thx to all!