Database Users

Unbrick and Full system backup *.bin?

First, apologize for poor English.
Does anyone have full system backup as single img or bin file? Accidentally flash ZUK Z1 rom when porting MIUI8 and now my device is bricked, and partitions is a mess. QFIL doesn't allow me flash because detect ZUK device. Is anyone kind enough to make backup with EMMCRAW_1.4.0.0 or something similar? It's important to be a software without model check, just simple raw copy as single file.
update: Things goes worst. Tried to save it with Qfil but it fail, Miflash fail too and ruined my partitions. Long story short, now my device doesn't boot, blank screen, windows XP,7 and 10 recognize Qualcomm 9008 mode if i power it on without battery. With plugged battery recognized as Linux CD...something, without partitions. ADB and Fastboot doesn't work on any case. On many tries, Qfil accept only ZUK Z1 rom, flashing fine but doesn't boot off course. If i start QPST Configuration tool, it detects port but progress bar loading and never goes full, EMMC Software Download tool fail too. So, i'm asking for advice.

I found a friend with the same phone and make raw system dump, but result is same, only Qualcomm 9008 mode. Is my mainboard broken?

Did you try with older qfil? QPST ver2.7.422?
maybe this help

Krasimir said:
First, apologize for poor English.
Does anyone have full system backup as single img or bin file? Accidentally flash ZUK Z1 rom when porting MIUI8 and now my device is bricked, and partitions is a mess. QFIL doesn't allow me flash because detect ZUK device. Is anyone kind enough to make backup with EMMCRAW_1.4.0.0 or something similar? It's important to be a software without model check, just simple raw copy as single file.
update: Things goes worst. Tried to save it with Qfil but it fail, Miflash fail too and ruined my partitions. Long story short, now my device doesn't boot, blank screen, windows XP,7 and 10 recognize Qualcomm 9008 mode if i power it on without battery. With plugged battery recognized as Linux CD...something, without partitions. ADB and Fastboot doesn't work on any case. On many tries, Qfil accept only ZUK Z1 rom, flashing fine but doesn't boot off course. If i start QPST Configuration tool, it detects port but progress bar loading and never goes full, EMMC Software Download tool fail too. So, i'm asking for advice.
Click to expand...
Click to collapse
try volume down + power and try formating everything fro that menu

K920
Hi,
I have exactly the same problem. Did you resolve it?

Fastboot rom, to unbrick my op5

Hi there!!!
My OP5 is full dead!!! Black screen, no charging, no buttons !!!
That why ive tried change rom, flashed via twrp installed!!!
I think the good thing is PC can recognize because device in the Qualcomm HS-USB Qdloader 9008 /EDL mode.
I have tried unbrick it, using this tools
QFIL
Q phone download tool
eMMC DL TOOL
Xiaomi Mi Flas Tool
But....................I NEED A STOCK ROM MUST HAVE
“rawprogram0.XML”, “patch0.XML”, “prog_emmc_firehose_8974.mbn” and “MPRG8974.mbn” flashers . ETC, ETC
BECAUSE
OnePlus5OXYGEN_23_OTA_009_all_1707032123_c10521d0fb8b46c0. ZIP
is missing that kind of files.
DOES SOMEBODY CAN TELL ME WHERE CAN I GET THIS KIND OF ROM FOR OP5!!!????
HELP HELP

Get it from the official site

COOL1 BRICKED QUALCOMM HS-USB Diagnostic 900E

After using my cool1 for a month with no problems i decided to flash JUI 7.0.1 (with gapps etc...) on my Cool1 via TWRP but after doing it i realized it has many bugs and apps doesn't work properly. So i decided to return to EUI. After flashing the original stock firmware and rebooting the phone automatically switched off.
Power button not working, i cannot get into recovery and i tried all combinations of buttons without success.
When i connect it to the computer the red led start glowing and my computer recognizes it ONLY in Device Manager as QUALCOMM HS-USB Diagnostic 900E (COM3).
i have all the latest drivers installed.
i tried QFIL and it also recognizes it as QUALCOMM HS-USB Diagnostic 900E (COM3) and after setting everything when i click "Download" i get this error:
Start Download
COM Port number:3
Switch To EDL
Download Fail:Switch To EDL FailFailed to Switch to Emergency Download mode
Finish Download
Click to expand...
Click to collapse
MiFlash doesn't recognize the phone so nothing to do
Coolpad Download Assistant doesn't recognize the phone.
YGDP not working
to flash a new rom i need the phone to go into QUALCOMM HS-USB QDLOADER 9008 MODE but i tried everything installed the latest drivers even bought a 10$ EDL CABLE from amazon still not working always show me QUALCOMM HS-USB Diagnostic 900E
Any suggestion that would help, please... I think it's hard bricked because it cannot get into recovery nor the fastboot mode. completely dead only Red led glowing and QUALCOMM HS-USB Diagnostic 900E (COM3).
Thank you

hi
i installed custom recovery to cool 1 c 103
after it finished model number changed to 106
what i have to do?????

So nobody could help?

hello. probably you wipe system. .. or i dont know..but try this:
Forced writing a recovery mod using QFIL.exe:
a) open program qfil.exe
b) choose the recovery folder and xml file
(remember: for writing succes recovery you need type this command in cmd: BCDEDIT.EXE –SET TESTSIGNING OFF)
c) plug the phone
d) now. most important: Hold Volume up , Volume Down and Power Button At same time. and - always press the button
if not working : first d) and then c) steps.
if the qfil.exe read the phone hold continues button.
e) press download button on qfil.exe
Now in this moment you have a recovery mod.
This method it worked for me
So now you need a flash a rom.
I dont understand why after flash some room(miui 8, 9, etc) my phone did not open..
maybe some rom dont have a kernel
so.. i flash the jui 7 by cuoco and my phone its a live ()
now you can try flash now room (I'm not sure if it will work as I did not try)
1. wipe data and cache
2) flash new rom
edit: dont work flash any rom after flashed jiui..i dont know why......
Edit2: for change jui to eui watch this:
https://youtu.be/oPB1izX4Plo
Good luck:good:

Bogdanm997 said:
hello. probably you wipe system. .. or i dont know..but try this:
Forced writing a recovery mod using QFIL.exe:
a) open program qfil.exe
b) choose the recovery folder and xml file
(remember: for writing succes recovery you need type this command in cmd: BCDEDIT.EXE –SET TESTSIGNING OFF)
c) plug the phone
d) now. most important: Hold Volume up , Volume Down and Power Button At same time. and - always press the button
if not working : first d) and then c) steps.
if the qfil.exe read the phone hold continues button.
e) press download button on qfil.exe
Now in this moment you have a recovery mod.
This method it worked for me
So now you need a flash a rom.
I dont understand why after flash some room(miui 8, 9, etc) my phone did not open..
maybe some rom dont have a kernel
so.. i flash the jui 7 by cuoco and my phone its a live ()
now you can try flash now room (I'm not sure if it will work as I did not try)
1. wipe data and cache
2) flash new rom
edit: dont work flash any rom after flashed jiui..i dont know why......
Good luck:good:
Click to expand...
Click to collapse
I've flashed the recovery mode but my phone is not opening can you help me ? :crying:

silentzer14 said:
I've flashed the recovery mode but my phone is not opening can you help me ? :crying:
Click to expand...
Click to collapse
Edit 3: To change EUI to JUI or viceversa You need use Coolpad download assistant
I found a video yt, link bellow.
Hi, but recovery mod is working? Press Vol up + Power Button to Enter in recovery.
If recovery work, You can flash a rom . Jui or eui.
More details please and i try to help You.
Edit:
Or write rom with coolpad download assistant:
https://youtu.be/oPB1izX4Plo
After You can install recovery
Edit2: I recomanded install trwp 3.1.x.x by @Cuoco92
And then You can Root the phone. (Install magisk or SuperSU from recovery)

Bogdanm997 said:
Edit 3: To change EUI to JUI or viceversa You need use Coolpad download assistant
I found a video yt, link bellow.
Hi, but recovery mod is working? Press Vol up + Power Button to Enter in recovery.
If recovery work, You can flash a rom . Jui or eui.
More details please and i try to help You.
Edit:
Or write rom with coolpad download assistant:
https://youtu.be/oPB1izX4Plo
After You can install recovery
Edit2: I recomanded install trwp 3.1.x.x by @Cuoco92
And then You can Root the phone. (Install magisk or SuperSU from recovery)
Click to expand...
Click to collapse
I have fixed the device but the only problem now is I don't have any signal. Simcards are detected but no Network at ALL, I tried to Fix my IMEI but still the same, do you know how to fix it ?
I also tried to reflash the rom through TWRP still the same -_-

realblackyz said:
After using my cool1 for a month with no problems i decided to flash JUI 7.0.1 (with gapps etc...) on my Cool1 via TWRP but after doing it i realized it has many bugs and apps doesn't work properly. So i decided to return to EUI. After flashing the original stock firmware and rebooting the phone automatically switched off.
Power button not working, i cannot get into recovery and i tried all combinations of buttons without success.
When i connect it to the computer the red led start glowing and my computer recognizes it ONLY in Device Manager as QUALCOMM HS-USB Diagnostic 900E (COM3).
i have all the latest drivers installed.
i tried QFIL and it also recognizes it as QUALCOMM HS-USB Diagnostic 900E (COM3) and after setting everything when i click "Download" i get this error:
MiFlash doesn't recognize the phone so nothing to do
Coolpad Download Assistant doesn't recognize the phone.
YGDP not working
to flash a new rom i need the phone to go into QUALCOMM HS-USB QDLOADER 9008 MODE but i tried everything installed the latest drivers even bought a 10$ EDL CABLE from amazon still not working always show me QUALCOMM HS-USB Diagnostic 900E
Any suggestion that would help, please... I think it's hard bricked because it cannot get into recovery nor the fastboot mode. completely dead only Red led glowing and QUALCOMM HS-USB Diagnostic 900E (COM3).
Thank you
Click to expand...
Click to collapse
Turn off your phone then
Insert the Cable
Hold "VOLUME UP + DOWN + POWER BUTTON" wait until the 4th beep sound Then try to flash again.

I didnt get this problem, I dont know exactly how to fix, but try:
https://youtu.be/9mbNvItVg78
https://youtu.be/8QZF_H_JNpA

silentzer14 said:
Turn off your phone then
Insert the Cable
Hold "VOLUME UP + DOWN + POWER BUTTON" wait until the 4th beep sound Then try to flash again.
Click to expand...
Click to collapse
Unfortunately it isn't working just tried

Try Vol Up + Down + Usb Cable , to get into 9008 Mode.

dwaipayan774 said:
Try Vol Up + Down + Usb Cable , to get into 9008 Mode.
Click to expand...
Click to collapse
USB cable?sorry What's 9008 mode..

bigdoomzoe said:
USB cable?sorry What's 9008 mode..
Click to expand...
Click to collapse
Qualcomm HS- Usb 9008 mode .
Press vol up and down and plug in the usb cable while connected to PC.

What program is needed for the computer

bigdoomzoe said:
What program is needed for the computer
Click to expand...
Click to collapse
---------- Post added at 08:43 AM ---------- Previous post was at 08:42 AM ----------
bigdoomzoe said:
What program is needed for the computer
Click to expand...
Click to collapse
QFIL or HQXA

This will unlock my network

I try it but when i do the recovery mode only the red light is working the phone isn't vibrate and nothing so i tried to do it in the YGDP tool and isn't working too are you know anoyher way ?? :crying:

Boulfalxd said:
I try it but when i do the recovery mode only the red light is working the phone isn't vibrate and nothing so i tried to do it in the YGDP tool and isn't working too are you know anoyher way ?? :crying:
Click to expand...
Click to collapse
Try QGDP. On my Pc my phone is not detected by YGDP ,but I can flash stock ROM with QGDP.You can flash with QGDP , without even turning on the phone.Add the CPB file in QGDP, click start, and then plug in phone while switched off(no need to press any button)

Man you're my hero ;b

Boulfalxd said:
Man you're my hero ;b
Click to expand...
Click to collapse
If you were able to flash Stock ROM,then Congratulations.

LG G2 hard bricked, partition table lost and stuck in QDLoader 9008 mode

Hello Guys, I have LG G2 F320S (Korean Variant) and a few days ago it was stuck in fastboot mode while i was trying to upgrade to Lollipop firmware using LG Flash Tool 2014. And Fastboot commands were working fine but the problem was that some of the partitions had become write-protected so I was unable to erase or reflash those partitions. So, I short circuit the capacitor and I successfully entered Qualcomm 9006 mode with a number of partitions. I used SRKtool to restore partitions (I have this experience in the past so it was easy for me) but here I noticed 1 or 2 partitions were not restored (write-protected) but phone restarted to download mode. When I tried to flash stock firmware then it always stuck in the middle or something and later once again I was stuck in fastmode mode where I started.
I don't know how partitions became write-protected?
Once again I disassembled the cellphone and short-circuit the capacitor to enter Qualcomm 9006 mode and this time, I wanted to remove write-protection from these partitions so I opened "Diskpart" in "cmd" selected LG G2 and performed clean command and format it. Diskpart removed all the partitions gave me a 32GB single partition like a USB Flash. :laugh:
I thought may be after shorting the capacitor, I will get back partitions but this time I got QDLoader 9008 mode. Now whenever I connect phone to PC with or without battery then it is detected in Qualcomm QDloader 9008 mode.
I tried Boarddiag v3.99c but unfortunately this tool doesn't extract .kdz file of my LG G2 F320S korean variant. I tried to extract .tot file of LG G2 D802 (intl variant) and it completed successfully, so the problem is in .kdz file of my cellphone(probably not supported by this tool).
I can extract this .kdz using LGFirmware extract tool but unfortunately it doesn't create "partition.txt" file which is required in boarddiag to flash partitions. I used partition.txt file of LG G2 D802 but it gives error : No DLoad mode when trying to reflash programmer".
Any help would be appreciated.
#StayHomeStaySafe

Boarddiag full and working version helped
I have tried a lot of times to flash the partitions using boarddiag but it failed. It was the problem of the software because almost all versions had missing files. At last, I have found a working version of boarddiag which detects my phone and I am able to flash boot partitions to it. Although all 3 tests completed successfully (AP, EMMC, SDRAM) but still I am stucked, even after flashing all the boot images, I am still stuck in QDLoader 9008 mode and whenever I connect it to PC (with or without battery), it is detected in QDLoader 9008 mode.
Here is the link to the full working version of Boarddiag 3.99 for LG G2:
https://mega.nz/#!SwY2BQ6L!kPZ6s24hdaVj1x5grboFlAksHSwmItblXIcJCCSaeaw
(mega is blocked in many countries so you may have to use proxy/vpn to open this link)

Here is the result of all 3 tests. Please tell me whats the problem. SDRAM result is FAIL but why so?
https://ibb.co/6ntQwsv

Now I am able to enter "Download Mode" but unable to flash stock or any other firmware. I tried flashing with 2 softwares:
1. LG UP-G2-G3....This software gives error at 6% (at LAF read) as shown in picture below :
https://ibb.co/zXpDcjt
2. LG Flash tool 2014.... This software gives error at 4% by saying "Unable to Establish Connection" though connection is fine because phone is detected in Device Manager and in Download Mode "It shows signs that communication is successful but it wont flash.

salmanzafar said:
Now I am able to enter "Download Mode" but unable to flash stock or any other firmware. I tried flashing with 2 softwares:
1. LG UP-G2-G3....This software gives error at 6% (at LAF read) as shown in picture below :
https://ibb.co/zXpDcjt
2. LG Flash tool 2014.... This software gives error at 4% by saying "Unable to Establish Connection" though connection is fine because phone is detected in Device Manager and in Download Mode "It shows signs that communication is successful but it wont flash.
Click to expand...
Click to collapse
Did you try the TOT flash method already? It worked best for me, when I restored my phone from scratch 2 days ago.

rootarded said:
Did you try the TOT flash method already? It worked best for me, when I restored my phone from scratch 2 days ago.
Click to expand...
Click to collapse
Dear I have tried two methods. I tried LGUP and LG Flash Tools 2014. But both fails. Unfortunately, no TOT file is available for my LG G2 because its Korean variant (F320S) and it has only .kdz firmwares available.

QDLoader 9008 mode
Now, my phone is not entering download mode. It is displayed as QDLoader 9008 mode when connected to PC. Check the screenshot here : https://ibb.co/yk3VSbS
I have the working version of boarddiag but sometimes it passes all 3 tests and sometimes fails EMMC test ad sometimes SDRAM test is not completed successfully.

Please Help - Bricked - Stuck at Recovery - Big Problem - LeRee Le 3 C106 - LeEco Coolpad Cool1

Hello. While i tried flash twrp for newest ver and after reboot then cant go in again more to twrp.
I tried already thro MiFlash but PC doesnt recognize qualcom device, i have only "Coolpad Android Bootloader Interface" in device manager.
I also tried flash previous twrp CUOCO92 thro Windows CMD but i got error "unknown command".
I also tried with QFIL and QGDP/YGDP witch cpb file from here
and also doesnt work.
I also tried with Coolpad Download Assistant with this tutorial
https://forum.xda-developers.com/t/...-to-android-9-from-jui-or-nougat-rom.3954064/
but also doesn work, frozen at room upgrading for at least 1 hour and more, after that disconnected cable phone.
This phone is LeRee Le 3 C106
Please help me to recover my brick ;/
EDIT: FIXED!!!

miki666643 said:
Hello. While i tried flash twrp for newest ver and after reboot then cant go in again more to twrp.
I tried already thro MiFlash but PC doesnt recognize qualcom device, i have only "Coolpad Android Bootloader Interface" in device manager.
I also tried flash previous twrp CUOCO92 thro Windows CMD but i got error "unknown command".
I also tried with QFIL and QGDP/YGDP witch cpb file from here
and also doesnt work.
I also tried with Coolpad Download Assistant with this tutorial
https://forum.xda-developers.com/t/...-to-android-9-from-jui-or-nougat-rom.3954064/
but also doesn work, frozen at room upgrading for at least 1 hour and more, after that disconnected cable phone.
This phone is LeRee Le 3 C106
Please help me to recover my brick ;/
EDIT: FIXED!!!
Click to expand...
Click to collapse
HI, how do you have fixed? Please explain me....

dave21272 said:
HI, how do you have fixed? Please explain me....
Click to expand...
Click to collapse
thro YGDP_Tool_V4.0.6 installed original rom
1.52 GB file on MEGA
mega.nz
1. C1回退EUI刷机包 thro YGDP
2. TWRP_3.1.0_Cuoco92 thro mi flash
3. recovery from 4pda
4. ArrowOS Android 11 from 4pda
5. gapps
4pda helped me a lot

miki666643 said:
thro YGDP_Tool_V4.0.6 installed original rom
1.52 GB file on MEGA
mega.nz
1. C1回退EUI刷机包 thro YGDP
2. TWRP_3.1.0_Cuoco92 thro mi flash
3. recovery from 4pda
4. ArrowOS Android 11 from 4pda
5. gapps
4pda helped me a lot
Click to expand...
Click to collapse
Thanks!!! I try now!!!!

Can I flash if my pc recognized Coolpad Android Bootloader Interface wirh YGDP tool?

Great!!!!!!!!!!
my coolpad is alive !!!!!!!
The password for rar MEGA is : coolpadJUI2017
first flash init.cpb
second flash rom.cpb
and your phone is turn on !!!!!!!!!!!

yea exactly

However, I have another way.
1.Shut down your phone.
2.Hold Volume+ and Volume- , but WITHOUT power.
3.Connect it to computer.
4.If your phone's LED is flashing red lights, congratulations. You're now at 9008(EDL).
5.Download "C106-TWRP-需解压使用.zip“ from https://pan.baidu.com/s/1kdgu2YUstL...rentPath=/sharelink2927266148-452227205909178 .
6.Add a rom into the unzip folder.
7.Use QFIL(Miflash Public edition is okay,if you like) to flash it.
8.It should boot up.