Database Users

Need help unbricking my Axon 7

So I'm quite a noob when it comes to flashing/recoveries/bootloaders and things like that, and that's most likely the reason why I got myself into this situation. Anyways my axon 7 (which I bought in China a year ago) was running fine yesterday, just a little bit slow. I had installed TWRP on it, and flashed the US rom along with SuperSU root. However last night was when things all went wrong.
I tried to flash the xposed installer from twrp which caused me to not get stuck on the AXON boot screen when I tried to restart.
Seeing that my phone was now softbricked, I thought since my phone was already running so slow, maybe I should take this opportunity to install lineage os and at the same time unbrick my phone. Win win right?
But when I tried to flash lineage os, I got the red error 7 message and problems with mounting /system. I went into the zip and changed the updated script and tried reflashing the new lineage os zip. That didn't worked and I still got error 7 messages.
So I this point I was quite desperate to get my phone back so I tried to reinstall the stock axon 7 rom which didn't work as I ended up with unable to mount /system errors.
I tried to reinstall twrp but my pc wouldn't recognize my phone while it was in fastboot mode.
I tried this tutorial IGNORETHISTEXTCASUEICANTPOSTLINKSYETJUSTCOPYTHELINKTHATCOMESAFTERhttps://m.youtube.com/watch?v=T-7neHzSIvc but got stuck on the step where I needed to reformat my data partition as exfat (the progress bar just kept going). After waiting 3 hours for it to format, I thought it was frozen or something because the guy in the video was able to format it instantly.
So I force restarted my axon 7 and now I'm here:
1. Most of the time when I restart my phone, it gets stuck on the zte logo
2. occasionally it gives me the option menu (with power off, fastboot, recover, etc.)
3. If try to use fastboot, my pc won't recognize my phone
4. If I use recovery, I get stuck on the teamwin screen, but my computer seems to recognize my phones presence, in the fastboot command prompt the "adb devices" command displays my phone as "10109dd offline", if I run any other command such as reinstalling TWRP, the command gets stuck at "waiting for device"
5. Obviously can't boot into android cause my whole system partition is wiped
Anyways that's the state I'm currently in (all because I wanted to install xposed installer ) and I would appreciate any suggestions!

Make sure all your phone drivers and adb are up to date.
Also try the Zadig drivers these might help too.
In Windows device manager it should show as,
Qualcomm HS-USB QDLoader 9008"
If you get stuck you can always try using an Edl package.
I have and Edl help page here>
https://forum.xda-developers.com/axon-7/help/bad-flash-help-page-axon-7-t3839700

Syberclone said:
Make sure all your phone drivers and adb are up to date.
Also try the Zadig drivers these might help too.
In Windows device manager it should show as,
Qualcomm HS-USB QDLoader 9008"
If you get stuck you can always try using an Edl package.
I have and Edl help page here>
https://forum.xda-developers.com/axon-7/help/bad-flash-help-page-axon-7-t3839700
Click to expand...
Click to collapse
Holy moly, you saved my life Syberclone! I was able to flash back my rom through EDL mode and my A7 is saved! :angel: Thanks a million!:good:

Letv LeEco Le1s hard bricked (Help needed)

Dear members, this is my first post and the problem is very complicted, so please bear with the long post
Device details:
LeEco Le1s (x500)
MTK6795 chipset
3 GB + 32 GB (Everybody knows )
Background:
I downgraded my ROM from 19s to 14s with SP Flash tool and the phone booted normally. I went through the initial setup, unlocked Developer mode and USB debugging. Then I opened the adb toolkit on Win 7 x86 machine to unlock bootloader and install twrp custom recovery at single go (instead of letting phone rebot after bootloader unlock and then proceeding with recovery flashing).
Now phone went to soft brick, to overcome which I needed to flash userdata with sp flash tool (I have done this in past also following a tutorial, the same files were used this time). But flashing process resulted in BROM error and I was not successful.
So, I re-flashed the original 14s rom via SP flash tool to get the things back to working, but phone didn't boot properly and bootloop situation was still there. I again reflashed the same ROM and this timephone entered red light of death mode, and didn't boot up after flashing original rom.
Now, I again googled this problem and found that we need to format flash with bootloader. Here the problem complicated further.
As soon as I formatted the flash and the bootloader, laptop stopped detecting the phone via usb cable. Now I can't flash any rom using SP flash tool as the phone is not detectable.
I have reinstalled my windows 7 32 bit operating system and reinstalled all the drivers for MTK smartphone. I have another Le1s phone running on 19s version of EUI marshmallow with stock recovery and locked bootloader which is detecting fine without problems.
Please guide me how can I resolve the problem.
Also guide if the other phone can anyhow help in this matter in terms of software backup for SP flash tool (I couldn't find a way of backing stock rom using SP flash tools.
Problem summary:
1) Flash with bootloader formatted
2) Phone is not detectable on Windows 7 32 bit OS and latest SP flash tools
3) Red LED turns on when phone connected to charger or laptop via usb cable,nothing on LCD display
4) Can't reach bootloader or recovery either
Help will be really appreciated. You all know the value of data stored on smartphones.
Thanks in advance!!

can explain how you were able to solve it?
facing a similar issue would ne helpful.
thanks.

LG G2 hard bricked, partition table lost and stuck in QDLoader 9008 mode

Hello Guys, I have LG G2 F320S (Korean Variant) and a few days ago it was stuck in fastboot mode while i was trying to upgrade to Lollipop firmware using LG Flash Tool 2014. And Fastboot commands were working fine but the problem was that some of the partitions had become write-protected so I was unable to erase or reflash those partitions. So, I short circuit the capacitor and I successfully entered Qualcomm 9006 mode with a number of partitions. I used SRKtool to restore partitions (I have this experience in the past so it was easy for me) but here I noticed 1 or 2 partitions were not restored (write-protected) but phone restarted to download mode. When I tried to flash stock firmware then it always stuck in the middle or something and later once again I was stuck in fastmode mode where I started.
I don't know how partitions became write-protected?
Once again I disassembled the cellphone and short-circuit the capacitor to enter Qualcomm 9006 mode and this time, I wanted to remove write-protection from these partitions so I opened "Diskpart" in "cmd" selected LG G2 and performed clean command and format it. Diskpart removed all the partitions gave me a 32GB single partition like a USB Flash. :laugh:
I thought may be after shorting the capacitor, I will get back partitions but this time I got QDLoader 9008 mode. Now whenever I connect phone to PC with or without battery then it is detected in Qualcomm QDloader 9008 mode.
I tried Boarddiag v3.99c but unfortunately this tool doesn't extract .kdz file of my LG G2 F320S korean variant. I tried to extract .tot file of LG G2 D802 (intl variant) and it completed successfully, so the problem is in .kdz file of my cellphone(probably not supported by this tool).
I can extract this .kdz using LGFirmware extract tool but unfortunately it doesn't create "partition.txt" file which is required in boarddiag to flash partitions. I used partition.txt file of LG G2 D802 but it gives error : No DLoad mode when trying to reflash programmer".
Any help would be appreciated.
#StayHomeStaySafe

Boarddiag full and working version helped
I have tried a lot of times to flash the partitions using boarddiag but it failed. It was the problem of the software because almost all versions had missing files. At last, I have found a working version of boarddiag which detects my phone and I am able to flash boot partitions to it. Although all 3 tests completed successfully (AP, EMMC, SDRAM) but still I am stucked, even after flashing all the boot images, I am still stuck in QDLoader 9008 mode and whenever I connect it to PC (with or without battery), it is detected in QDLoader 9008 mode.
Here is the link to the full working version of Boarddiag 3.99 for LG G2:
https://mega.nz/#!SwY2BQ6L!kPZ6s24hdaVj1x5grboFlAksHSwmItblXIcJCCSaeaw
(mega is blocked in many countries so you may have to use proxy/vpn to open this link)

Here is the result of all 3 tests. Please tell me whats the problem. SDRAM result is FAIL but why so?
https://ibb.co/6ntQwsv

Now I am able to enter "Download Mode" but unable to flash stock or any other firmware. I tried flashing with 2 softwares:
1. LG UP-G2-G3....This software gives error at 6% (at LAF read) as shown in picture below :
https://ibb.co/zXpDcjt
2. LG Flash tool 2014.... This software gives error at 4% by saying "Unable to Establish Connection" though connection is fine because phone is detected in Device Manager and in Download Mode "It shows signs that communication is successful but it wont flash.

salmanzafar said:
Now I am able to enter "Download Mode" but unable to flash stock or any other firmware. I tried flashing with 2 softwares:
1. LG UP-G2-G3....This software gives error at 6% (at LAF read) as shown in picture below :
https://ibb.co/zXpDcjt
2. LG Flash tool 2014.... This software gives error at 4% by saying "Unable to Establish Connection" though connection is fine because phone is detected in Device Manager and in Download Mode "It shows signs that communication is successful but it wont flash.
Click to expand...
Click to collapse
Did you try the TOT flash method already? It worked best for me, when I restored my phone from scratch 2 days ago.

rootarded said:
Did you try the TOT flash method already? It worked best for me, when I restored my phone from scratch 2 days ago.
Click to expand...
Click to collapse
Dear I have tried two methods. I tried LGUP and LG Flash Tools 2014. But both fails. Unfortunately, no TOT file is available for my LG G2 because its Korean variant (F320S) and it has only .kdz firmwares available.

QDLoader 9008 mode
Now, my phone is not entering download mode. It is displayed as QDLoader 9008 mode when connected to PC. Check the screenshot here : https://ibb.co/yk3VSbS
I have the working version of boarddiag but sometimes it passes all 3 tests and sometimes fails EMMC test ad sometimes SDRAM test is not completed successfully.

Recover L1 from soft brick

Hi all,
I need of some assistance, I've got 2 Xperia L1's in front of me that will not boot.
Plug in to PC, and the device is picked up as a USB Serial Port.
I can still get into flash mode, but even here I'm having issues.
I am unable to flash any stock ROM. The process simply stops and gives up with no errors at "Opening TA Partition 2".
I've got a backup of the TA partition, but I can't flash using dd / adb, as the phone does not boot.
Any recommendations? I've tried updating PC drivers, using old versions of flash tool and different cables with no luck..

[HELP] Z380KL stuck in qhsusb_bulk mode

I accidentally flashed my Z380KL (P024) with stock ROM using TWRP, and now the tablet won't boot. The tablet is only recognizable under qhsusb_bulk mode. There is no ASUS logo, and the screen won't turn on. I have all the necessary tools ready, including Tool Studio, eMMC DL and QFIL, but I have trouble finding the stock ROM including the mbn or the rawprogram.xml file, and there is not enough resources on the net. I looked up some blogs and they told me to have a backup of someone's eMMC backup, but I can't seem to find one online. Any help is much appreciated.
Also I have a TWRP backup of the LineageOS ROM earlier if that helps.
Does anyone have the full firmware for Z380KL? The one that contains rawprogram.xml, patch.xml and such