How to pass WAS-L01AC02 to WAS-L01AC432 - Huawei P10 Lite Questions & Answers

Hello,
How do I pass my Huawei P10 Lite from WAS-L01AC02(locked by vodafone) to WAS-L01AC432(Global Europe Version)?
Thanks

This may helps... if you just wants to rebrand the phone and unlock 2nd SIM slot: https://forum.xda-developers.com/p10-lite/how-to/huawei-p10-lite-lx1c432-successfully-t3737383
But if your SIM slot is locked to Vodafone there is no free way to unlock the SIM slots. In this case you need HCU Client and 3 credits (3 euro) to unlock the slots!
The easiest way to buy credits is by PayPal directly from DC-unlocker: https://www.dc-unlocker.com/buy
HCU Client: https://hcu-client.com/
SIM Unlock tutorial: http://hcu-client.com/huawei-mtk-phone-sim-unlock/
You need to enter into Manufacture Mode: *#*#2846579#*#*
Project menu -> Background settings -> USB Ports -> Manufacture Mode
Then run HCU Client, log in to your Account, connect the phone, go to tab Unlock, press Direct SIM Unlock.

Aalesund said:
This may helps... if you just wants to rebrand the phone and unlock 2nd SIM slot: https://forum.xda-developers.com/p10-lite/how-to/huawei-p10-lite-lx1c432-successfully-t3737383
But if your SIM slot is locked to Vodafone there is no free way to unlock the SIM slots. In this case you need HCU Client and 3 credits (3 euro) to unlock the slots!
The easiest way to buy credits is by PayPal directly fronm DC-unlocker: https://www.dc-unlocker.com/buy
HCU Client: https://hcu-client.com/
SIM Unlock tutorial: http://hcu-client.com/huawei-mtk-phone-sim-unlock/
You need to enter into Manufacture Mode: *#*#2846579#*#*
Project menu -> Background settings -> USB Ports -> Manufacture Mode
Then run HCU Client, log in to your Account, connect the phone, go to tab Unlock, press Direct SIM Unlock.
Click to expand...
Click to collapse
I had a Huawei p8 lite and i downloaded a rom(i think its was a stock rom) from a video from YouTube ( channel Huawei device). And after that my model number was BalongC432. (I did all that for free). And Also i unlocked the 2nd sim card wirh that rom C432.
I think it could happen that um My p10 lite Also.
Are you sure that theee are a free way to do this for free?
Thanks anyway.
I want to Turn my was-Lx1ac02 to was-lx1ac432 because i want android 8.0 beta in my phone
https://forum.xda-developers.com/p10-lite/help/want-to-install-android-8-huawei-p10-t3789618

Related

Sim unlock for SPV C500?

Hi
I recently bought a C500. It turned out to have been bought over Ebay from a previous owner.
The problem is that the phone is sim-locked. Is it possible to unlock the phone without having an Orange sim?
The main problem is that i live in Denmark and I have no idea of where to get hold of an Orange sim.
So is it possible to remove the simlock without actually having an Orange sim in the phone?
Thanks!
Unlocking of Typhoon, Hurricane and Tornado is for free: use the tools linked from here: http://www.mediafire.com/?tzx4f489w8qlmwf
1.) application unlock the operating system (first folder tools)
2.) start lokiwiz in the second folder and select "S" for SIM Unlock
3.) the device will prompt for a confirmation to load itsutils.dll, confirm that
Action continues, device restarts and is SIM Unlocked.

i want pro to inter sim code cos i chang my rom

i broken securety from my phone htc p3400 & change rom
my mobile close in mobinel simcard i buy the code & whin i go to inter it
im not fund the box to inter unlock cod & i afraid to re instol initial rom
becouse i broken security
i want programs to inter code unlocker to open mobile in all sim
c u helb me pls

Tutorial: Modem Huawei E303-HiLink working onTitan7010 (RK2918)

This modem is very different from the others. It's kind of interface ethernet-usb or something.
It is not possible or necessary to make the switch to modem only from Hyperterminal or puTTY.
Prerequisites:
1 - ROOT
2 - Modem with unbranded firmware.
To this must go to calcode.webs.com, or https://www.facebook.com/Calcodewebcom, with your IMEI can get the NCK and FLASH CODE CODE for Huawei modems IMEI number 85/86. Since it is the only calculator free to do so. The DC-Unlocker balance no longer free to do so, if you can accomplish for pay.
If you know the IMEI of the modem there are several ways to find out, the easiest is with the DC-Unlocker
Then lower the firmware of this website
http://www.unlockmodemfree.biz/2013/01/upgrade-huawei-e303-firmware-to.html
and flashed from a PC with WINDOWS (they will ask the flash code, there enter the flash code obtained from calcode.webs.com).
If your modem is lock then use the Card Lock Unlock Tool program, download it from the same website, and try to unlock your modem to use with any company (optional).
After this and the tablet off and plug the modem light up. When you turn the tablet will see the signal bar in the lower right corner.
3 - At this point of the tutorial is where I am a little confused. Since I do not know if I got the connection by using the method of xdadevelopers or if this is not necessary (because I did it before trying to connect to the UMTS Manager Root)
Two options: a) http://forum.xda-developers.com/showthread.php?t=2172914
This thread details a method somewhat difficult to do. I did it. Instead of using ES Explorer I used Root Explorer and instead of using the GScript used the Script Manager. The issue here is that after the method nothing happened, no connection established, no sailing. Then I opened the UMTS Manager Root and configured with APN, username and password for my ISP 3G. I used the port / dev/ttyUSB0 and "CONECT" with success.
b) Then it may not be necessary to make the method xdadevelopers and only need ROOT MANAGER UMTS on the tablet, download it from the PlayGoogle
https://play.google.com/store/search?q=UMTS+Manager+root&c=apps
add your apn, username and password. Then select the port / dev/ttyUSB0 and give Connect.
In the end I succeeded. Maybe some other user can play and comment if necessary xdadevelopers method (http://forum.xda-developers.com/showthread.php?t=2172914) before using the UMTS Manager Root or only using this apk wonderful connection is already achieved.
Thanks man
this is cool, just to add, the site you provided for unlcoking of huawei modems is no more in service so i just want to add a place people can generate free unlock codes for Huawei Modems like the E303 as you mentioned.
Huawei Unlock calculator

Sim Unlock - Honestly FREE

Hi all.
IMPORTANT S7 T-Mobile and S8 T-Mobile are Qualcomm based and MY METHOD DOES NOT WORK. I WILL UPDATE WHEN/IF IT DOES
UPDATE 27.01.2018
MAGISK........
I am having trouble unlocking on phones with Magisk installed for ROOT
Nothing against Magisk, I personally use and love it. Feel free to install this AFTER UNLOCK
I'm just having trouble with the unlock using Magisk.
I am offering a free unlock via
I will still gladly accept any donations that come my way via PayPal ([email protected])
But DONATION is 100% OPTIONAL
All i ask is RESPECT and PATIENCE. (if these are not given then I may CHOOSE not to help you)
Remember this is taking time away from my wife and family to help YOU!
This is a FREE remote unlock service. AT YOUR OWN RISK.
No, I will not share my method..... as it could get patched by Samsung.
Here we go........
SEE CURRENT SUPPORTED MODELS AND FIRMWARES HERE
F.A.Q
Q. What if my IMEI is bad or blacklisted?
A. There are a few times of blacklist... T-Mobile seems to block INTERNAL only if non payment. Others will block if non payment or lost/stolen.
This does not effect SIM unlock, I can do it regardless.... However, you WILL NOT GET NETWORK SIGNAL IF BLOCKED
Check here for T-mobile https://www.t-mobile.com/verifyIMEI.aspx and also here for all models http://imei24.com/blacklist_check/
If you are not sure ask first!
Q. Can you change/repair my IMEI?
A. HELL NO. This is not only against XDA Rules but it is illegal in most countries, including mine.
Q. Is this really free?
A. Yes, although I do hope for a donation for my time and effort
Q. When are you available?
A. See below.
Q. Can we get on with it all ready?
A. Yes!
Remote Sim Unlock Preparation
Contact
Please be considerate of my time zone this it GMT +03 (UTC +13), check here NZDT https://www.timeanddate.com/time/zones/nzdt I am usually available after work 5PM until 8PM.
I am also available some weekends. Leave me a message on hangouts here with [email protected] and i will get back to you ASAP.
Please contact me when you are ready after reading below. Contact [email protected] via Google Hangouts.
If you do not have a reply within 24 hours then please email me with your gmail address on [email protected] and I will add you to hangouts.
Google Hangouts is needed so you can follow directions as I unlock your device. Everyone with a Google accounts has Google Hangouts.
You can access it via hangouts.google.com
Phone Settings ALL Models
Disable FRP by enabling OEM UNLOCK
http://techbeasts.com/how-enable-oem-unlock-android-lollipop-marshmallow/
Enable USB debugging
https://forum.xda-developers.com/fire-phone/general/guide-enable-usb-debugging-setup-t2859697
Revoke USB authorization (if applicable)
Developer Settings > Revoke USB authorization
GSM Only
Phone dialer > *#0808# > USB = AP
Phone dialer > *#0808# > USB SETTINGS = DM + ACM/MODMEM + ADB (note, will say ACM or MODEM)
If and only IF the above doesn’t work then try:
Developer Settings > USB Configuration > RNDIS (USB Ethernet)
SPRINT Only
Phone dialer > ##3424# >Qualcomm USB settings > DM + ADB + Modem
If the above asks for MSL or doesn’t work then try:
Developer Settings > USB Configuration > RNDIS (USB Ethernet) then we can get MSL to enable the above if you need MSL
For those that don't know... the 5th to last digit in the firmware is the BOOTLOADER (BL) version. YOU CAN'T GO BACK!!
i.e G920TUVU5EQC2 the BL version is 5 so you can't flash anything less than BL version 5
PC
You will need a Windows PC for the software. Please ensure you have Windows 7 or newer
Windows Vista and XP are NOT RECOMMENDED (for anything lol).
Please download FlexiHub http://www.eltima.com/wiki/user-guides/flexihub-windows/installation.html and install on your PC.
Please reboot after install.
Please create a FREE flexihub account here https://flexihub.eltima.com/user/registration/ AFTER ENTER DETAILS, YOU WILL SEE A PAYMENT PAGE... CLOSE WINDOW NOW. FREE ACCOUNT ALREADY CREATED
Or I have a few accounts if you wish to use one just let me know.
Please have FlexiHub open and logged in.
Unlocking Process
When you have contacted me and I have replied that we are ready you may proceed to:
Open flexihub and log in to your account
DO NOT SEND COM PORT. THIS IS USELESS TO ME ALONE
If needed click 'UNLOCK' on the phone's driver so it can be accessed (i.e Samsung_Android OR Gadget_Serial OR MSMxxxx)
Right click on your phone's driver in flexihub(i.e Samsung_Android OR Gadget_Serial OR MSMxxxx) and click send invite.
Type in [email protected] and click OK.
I will connect to the device and proceed from there.
Please watch phone for USB Authorization prompt.
Check the box then press OK.
I will disconnect and reconnect as required (using FlexiHub).
Watch phone Screen for SU (ROOT) prompt and press GRANT.
All you need to do is watch the phone for USB Authorization and ROOT grant.
Please follow the instructions I send via Google Hangouts
After we are finished you can return your device settings to as they were and you can remove FlexiHub from PC.
Please kindly donate via PayPal to [email protected] (once again 100% optional)
Cool. Another way to unlock.
https://forum.xda-developers.com/galaxy-s7/how-to/galaxy-s7-free-unlock-code-samsung-t3677396
Xygote said:
Cool. Another way to unlock.
https://forum.xda-developers.com/galaxy-s7/how-to/galaxy-s7-free-unlock-code-samsung-t3677396
Click to expand...
Click to collapse
I like this way better, it doesn't beg for donations in huge red text
Im still doing this been very few at the moment :/
Bump.
Still doing this.
Few changes made to thread for clarity,
Mainly........
SEE CURRENT SUPPORTED MODELS AND FIRMWARES HERE
*Detection* said:
I like this way better, it doesn't beg for donations in huge red text
Click to expand...
Click to collapse
i don't understand what is so wrong with making a donation to someone who does a service for you for free?? So I take it you are one of those people who don't tip your waitress or bartender.. To each their own but see no need in leaving your comment.
I dont know why people complain when they see about donation.This guy is usimg his time to help you.Also the unlock process he is using requires a paid gsm software, maybe even some credits if he is using z3x.Stop complaining and keep donating if somoene is helping you with something.Great job man.
stifilz said:
Hi all.
IMPORTANT S7 T-Mobile and S8 T-Mobile are Qualcomm based and MY METHOD DOES NOT WORK. I WILL UPDATE WHEN/IF IT DOES
UPDATE 27.01.2018
MAGISK........
I am having trouble unlocking on phones with Magisk installed for ROOT
Nothing against Magisk, I personally use and love it. Feel free to install this AFTER UNLOCK
I'm just having trouble with the unlock using Magisk.
I am offering a free unlock via
I will still gladly accept any donations that come my way via PayPal ([email protected])
But DONATION is 100% OPTIONAL
All i ask is RESPECT and PATIENCE. (if these are not given then I may CHOOSE not to help you)
Remember this is taking time away from my wife and family to help YOU!
This is a FREE remote unlock service. AT YOUR OWN RISK.
No, I will not share my method..... as it could get patched by Samsung.
Here we go........
SEE CURRENT SUPPORTED MODELS AND FIRMWARES HERE
F.A.Q
Q. What if my IMEI is bad or blacklisted?
A. There are a few times of blacklist... T-Mobile seems to block INTERNAL only if non payment. Others will block if non payment or lost/stolen.
This does not effect SIM unlock, I can do it regardless.... However, you WILL NOT GET NETWORK SIGNAL IF BLOCKED
Check here for T-mobile https://www.t-mobile.com/verifyIMEI.aspx and also here for all models http://imei24.com/blacklist_check/
If you are not sure ask first!
Q. Can you change/repair my IMEI?
A. HELL NO. This is not only against XDA Rules but it is illegal in most countries, including mine.
Q. Is this really free?
A. Yes, although I do hope for a donation for my time and effort
Q. When are you available?
A. See below.
Q. Can we get on with it all ready?
A. Yes!
Remote Sim Unlock Preparation
Contact
Please be considerate of my time zone this it GMT +03 (UTC +13), check here NZDT https://www.timeanddate.com/time/zones/nzdt I am usually available after work 5PM until 8PM.
I am also available some weekends. Leave me a message on hangouts here with [email protected] and i will get back to you ASAP.
Please contact me when you are ready after reading below. Contact [email protected] via Google Hangouts.
If you do not have a reply within 24 hours then please email me with your gmail address on [email protected] and I will add you to hangouts.
Google Hangouts is needed so you can follow directions as I unlock your device. Everyone with a Google accounts has Google Hangouts.
You can access it via hangouts.google.com
Phone Settings ALL Models
Disable FRP by enabling OEM UNLOCK
http://techbeasts.com/how-enable-oem-unlock-android-lollipop-marshmallow/
Enable USB debugging
https://forum.xda-developers.com/fire-phone/general/guide-enable-usb-debugging-setup-t2859697
Revoke USB authorization (if applicable)
Developer Settings > Revoke USB authorization
GSM Only
Phone dialer > *#0808# > USB = AP
Phone dialer > *#0808# > USB SETTINGS = DM + ACM/MODMEM + ADB (note, will say ACM or MODEM)
If and only IF the above doesn’t work then try:
Developer Settings > USB Configuration > RNDIS (USB Ethernet)
SPRINT Only
Phone dialer > ##3424# >Qualcomm USB settings > DM + ADB + Modem
If the above asks for MSL or doesn’t work then try:
Developer Settings > USB Configuration > RNDIS (USB Ethernet) then we can get MSL to enable the above if you need MSL
For those that don't know... the 5th to last digit in the firmware is the BOOTLOADER (BL) version. YOU CAN'T GO BACK!!
i.e G920TUVU5EQC2 the BL version is 5 so you can't flash anything less than BL version 5
PC
You will need a Windows PC for the software. Please ensure you have Windows 7 or newer
Windows Vista and XP are NOT RECOMMENDED (for anything lol).
Please download FlexiHub http://www.eltima.com/wiki/user-guides/flexihub-windows/installation.html and install on your PC.
Please reboot after install.
Please create a FREE flexihub account here https://flexihub.eltima.com/user/registration/ AFTER ENTER DETAILS, YOU WILL SEE A PAYMENT PAGE... CLOSE WINDOW NOW. FREE ACCOUNT ALREADY CREATED
Or I have a few accounts if you wish to use one just let me know.
Please have FlexiHub open and logged in.
Unlocking Process
When you have contacted me and I have replied that we are ready you may proceed to:
Open flexihub and log in to your account
DO NOT SEND COM PORT. THIS IS USELESS TO ME ALONE
If needed click 'UNLOCK' on the phone's driver so it can be accessed (i.e Samsung_Android OR Gadget_Serial OR MSMxxxx)
Right click on your phone's driver in flexihub(i.e Samsung_Android OR Gadget_Serial OR MSMxxxx) and click send invite.
Type in [email protected] and click OK.
I will connect to the device and proceed from there.
Please watch phone for USB Authorization prompt.
Check the box then press OK.
I will disconnect and reconnect as required (using FlexiHub).
Watch phone Screen for SU (ROOT) prompt and press GRANT.
All you need to do is watch the phone for USB Authorization and ROOT grant.
Please follow the instructions I send via Google Hangouts
After we are finished you can return your device settings to as they were and you can remove FlexiHub from PC.
Please kindly donate via PayPal to [email protected] (once again 100% optional)
Click to expand...
Click to collapse
Nice thanks
stifilz said:
Hi all.
IMPORTANT S7 T-Mobile and S8 T-Mobile are Qualcomm based and MY METHOD DOES NOT WORK. I WILL UPDATE WHEN/IF IT DOES
UPDATE 27.01.2018
MAGISK........
I am having trouble unlocking on phones with Magisk installed for ROOT
Nothing against Magisk, I personally use and love it. Feel free to install this AFTER UNLOCK
I'm just having trouble with the unlock using Magisk.
I am offering a free unlock via
I will still gladly accept any donations that come my way via PayPal ([email protected])
But DONATION is 100% OPTIONAL
All i ask is RESPECT and PATIENCE. (if these are not given then I may CHOOSE not to help you)
Remember this is taking time away from my wife and family to help YOU!
This is a FREE remote unlock service. AT YOUR OWN RISK.
No, I will not share my method..... as it could get patched by Samsung.
Here we go........
SEE CURRENT SUPPORTED MODELS AND FIRMWARES HERE
F.A.Q
Q. What if my IMEI is bad or blacklisted?
A. There are a few times of blacklist... T-Mobile seems to block INTERNAL only if non payment. Others will block if non payment or lost/stolen.
This does not effect SIM unlock, I can do it regardless.... However, you WILL NOT GET NETWORK SIGNAL IF BLOCKED
Check here for T-mobile https://www.t-mobile.com/verifyIMEI.aspx and also here for all models http://imei24.com/blacklist_check/
If you are not sure ask first!
Q. Can you change/repair my IMEI?
A. HELL NO. This is not only against XDA Rules but it is illegal in most countries, including mine.
Q. Is this really free?
A. Yes, although I do hope for a donation for my time and effort
Q. When are you available?
A. See below.
Q. Can we get on with it all ready?
A. Yes!
Remote Sim Unlock Preparation
Contact
Please be considerate of my time zone this it GMT +03 (UTC +13), check here NZDT https://www.timeanddate.com/time/zones/nzdt I am usually available after work 5PM until 8PM.
I am also available some weekends. Leave me a message on hangouts here with [email protected] and i will get back to you ASAP.
Please contact me when you are ready after reading below. Contact [email protected] via Google Hangouts.
If you do not have a reply within 24 hours then please email me with your gmail address on [email protected] and I will add you to hangouts.
Google Hangouts is needed so you can follow directions as I unlock your device. Everyone with a Google accounts has Google Hangouts.
You can access it via hangouts.google.com
Phone Settings ALL Models
Disable FRP by enabling OEM UNLOCK
http://techbeasts.com/how-enable-oem-unlock-android-lollipop-marshmallow/
Enable USB debugging
https://forum.xda-developers.com/fire-phone/general/guide-enable-usb-debugging-setup-t2859697
Revoke USB authorization (if applicable)
Developer Settings > Revoke USB authorization
GSM Only
Phone dialer > *#0808# > USB = AP
Phone dialer > *#0808# > USB SETTINGS = DM + ACM/MODMEM + ADB (note, will say ACM or MODEM)
If and only IF the above doesn’t work then try:
Developer Settings > USB Configuration > RNDIS (USB Ethernet)
SPRINT Only
Phone dialer > ##3424# >Qualcomm USB settings > DM + ADB + Modem
If the above asks for MSL or doesn’t work then try:
Developer Settings > USB Configuration > RNDIS (USB Ethernet) then we can get MSL to enable the above if you need MSL
For those that don't know... the 5th to last digit in the firmware is the BOOTLOADER (BL) version. YOU CAN'T GO BACK!!
i.e G920TUVU5EQC2 the BL version is 5 so you can't flash anything less than BL version 5
PC
You will need a Windows PC for the software. Please ensure you have Windows 7 or newer
Windows Vista and XP are NOT RECOMMENDED (for anything lol).
Please download FlexiHub http://www.eltima.com/wiki/user-guides/flexihub-windows/installation.html and install on your PC.
Please reboot after install.
Please create a FREE flexihub account here https://flexihub.eltima.com/user/registration/AFTER ENTER DETAILS, YOU WILL SEE A PAYMENT PAGE... CLOSE WINDOW NOW. FREE ACCOUNT ALREADY CREATED
Or I have a few accounts if you wish to use one just let me know.
Please have FlexiHub open and logged in.
Unlocking Process
When you have contacted me and I have replied that we are ready you may proceed to:
Open flexihub and log in to your account
DO NOT SEND COM PORT. THIS IS USELESS TO ME ALONE
If needed click 'UNLOCK' on the phone's driver so it can be accessed (i.e Samsung_Android OR Gadget_Serial OR MSMxxxx)
Right click on your phone's driver in flexihub(i.e Samsung_Android OR Gadget_Serial OR MSMxxxx) and click send invite.
Type in [email protected] and click OK.
I will connect to the device and proceed from there.
Please watch phone for USB Authorization prompt.
Check the box then press OK.
I will disconnect and reconnect as required (using FlexiHub).
Watch phone Screen for SU (ROOT) prompt and press GRANT.
All you need to do is watch the phone for USB Authorization and ROOT grant.
Please follow the instructions I send via Google Hangouts
After we are finished you can return your device settings to as they were and you can remove FlexiHub from PC.
Please kindly donate via PayPal to [email protected] (once again 100% optional)[/QUOTE
What i have to do now I want to contact you I believe it is that way tell me how if I am doing something wrong
Click to expand...
Click to collapse
SICKMADE said:
i don't understand what is so wrong with making a donation to someone who does a service for you for free?? So I take it you are one of those people who don't tip your waitress or bartender.. To each their own but see no need in leaving your comment.
Click to expand...
Click to collapse
I don't understand people who think it's clever to bring up ancient posts for no reason other than to cause an argument, which you will not get
*Detection* said:
I don't understand people who think it's clever to bring up ancient posts for no reason other than to cause an argument, which you will not get
Click to expand...
Click to collapse
May be ancient to you but I don't spend every second on here ao was new to me and felt I would voice how stupid ignorant and disrespectful it was is all. But that's that nothing else to say take care
malebola said:
What i have to do now I want to contact you I believe it is that way tell me how if I am doing something wrong
Click to expand...
Click to collapse
You mean apart from....
Contact
Please be considerate of my time zone this it GMT +03 (UTC +13), check here NZDT https://www.timeanddate.com/time/zones/nzdt I am usually available after work 5PM until 8PM.
I am also available some weekends. Leave me a message on hangouts here with [email protected] and i will get back to you ASAP.
Please contact me when you are ready after reading below. Contact [email protected] via Google Hangouts.
If you do not have a reply within 24 hours then please email me with your gmail address on [email protected] and I will add you to hangouts.
Google Hangouts is needed so you can follow directions as I unlock your device. Everyone with a Google accounts has Google Hangouts.
You can access it via hangouts.google.com
Are you still doing this?
Just in case ... in a Note 8 exynos will work, I do not see it in the list sorry :good:
Hi. If you have time is there anyway you could try a US Cellular Galaxy S7 for me? I broke my moms phone and needed to replace it. It would be a huge help. Thank you.
Are you still offering this service? And is this still not possible on the T-Mobile S7?
is this still available? thanks

Huawei P10 lite no service

Urgent matter. I bought a huawei P10 lite from another person, I performed a hard reset and when I finished I can't get any signal on my device. It reads no service or emergency calls only. I tried everything on the net but nothing. The code *#*#4636#*#* doesn't work. The code that does work is *#*#6130#*#* but it's not very helpful. Can anyone help me to turn the radio on. Which code are for this process. Please send me solutions because it's urgent because I can't use my device.
Most likely, the phone is Locked to some mobile carrier.
Unfortunately there is no free way to unlock it!!!
About 3 weeks ago I had the same problems with P8Lite.
Paid solution:
- Go to https://www.dc-unlocker.com/buy and buy 3 credits (3 Euro) and create new account
- After a successful payment on your email you will receive Username and Password (check the Spam folder)
- Download HCU Client - https://hcu-client.com/download/
- Login with your Username and Password
- Put your P10Lite in the Manufacture mode
- Type this: *#*#2846579#*#*
- Go to ProjectMenu -> Background settings -> USB ports settings -> Manufacture mode
- Then connect the phone to PC via USB cable
- Press Read Phone Info
- Go to tap Unlock and press Direct SIM Unlock
- Finally, on the right side you should see Unlock done and the phone will turn off
- Turn on your phone and it will be unlocked.
Tested and works on P8 Lite, HCU cliend support P10 Lite and you can unlock it.
I think that it isn't locked because I tried with 3 different sim cards each in different mobile network.
I am still waiting for solutions. Thank you.
Some problem with IMEI or OEMinfo maybe ?.. try flash new FW
Still the same problem. Does anyone knows the shortcut to engineer mode? The new code because I found on the net some old codes but they didn't work.
There is no engeneering mode in P10 lite.
But as I said, I'm almost sure that phone is locked. Ask the previous owner what SIM card (mobile carrier / country) was used.
There is one other menu that is ProjectMenu
Insert you SIM card and check you SIM Lock status:
*#*#2846579#*#*
ProjectMenu -> Network Information Query -> SIM Lock Info
If you get "SIMLOCK_DEACTIVATE" then all it's okay and your phone isn't locked. But that means you probably have other big problems!
Can your phone has physically malfunction? Sim slots problem?
Also why you didn't test the phone before buying it?
Have you thought about mobile repair service?
Still the same problem
I installed a new software using update option and I get signal for five minutes but I wasn't able to use it because it didn't connect to network, then the no service and emergency calls only appear, oscillating between sim cards. The sim cards used are in different mobile service.
If I install Oreo the problem could disappear?
If so can anyone send me the link that I can download and install using update.app method?
If not could you suggest me a different solution.
Now shows that it's charging but the percentage of the battery drops.
Could be the same software problem?

Categories

Resources