Database Users

Unlock Code ?

What I don't understand:
When trying to start the gsm function of the xda with a "foreign" sim-card it tells me to enter the Access-Code in order to unlock the phone.
In this case there must exist a certain defined code which lets you unlock everey xda.
I am asking myself if there has probably already been a clever person trying to get this code somehow. Or am I totally wrong and it is necessary even for O2 to connect the device to some sepcial equipment.

From my understanding every single phone/pda etc has its own unique unlock code, abit like a PUK code.
It is made up using digits from the phone number, SIM IMEI and the Device IMEI number, only the service provide i.e. Orange, O2, Vodafone will have the sequence for this.
Just use the XDA Unlock tool listed on the XDA Developers site.
Hope this helps
Mike

Unlocking
...or just try that with a serial cable connected to your XDA and have a terminal program (eg. Hyperterminal) running on your PC:
... some of these things are pretty easy
once you know the trick. For instance, if you just put the XDA
in bootloader mode and enter "dualser", followed by
"AT%UREG?3FE00C,4", you will see the SID unlock code. More news
about all the things we've learned will be available soon on our
GSM research page...
Click to expand...
Click to collapse
Write down this SID-Code and use it when you insert a foreign SIM-Card.
Greetings, Kaputter

Cricket - Vx6900 Gps "help 911"

I have a VX6900 that was Flashed to Cricket, I have GPSViewer, Google maps, HTC GPS tool, & Quick GPS. each one see that i have a GPS card but I have never gotten a lock on, I have followed many treads, but I still can't get the GPS to work on my phone. please Help

try gps toggle
my sister flashed her sprint version of the touch to cricket and she uses gps toggle to turn on/off the gps receiver. i suggest that you only have google maps and gps toggle installed, and nothing else. give it a try and let me know if it worked out for you!
good luck

I've been told that nothing i do will enable my GPS because it was flashed wrong

wakko69 said:
I have a VX6900 that was Flashed to Cricket, I have GPSViewer, Google maps, HTC GPS tool, & Quick GPS. each one see that i have a GPS card but I have never gotten a lock on, I have followed many treads, but I still can't get the GPS to work on my phone. please Help
Click to expand...
Click to collapse
I also have mine flashed to Cricket. I have never got a GPS lock on mine...

So anyone have any ideas??

did you get GPS working
Did you get GPS working with your cricket ROM If not let me know I can help you.

Please post anyway how to get GPS working with a Cricket ROM.. Also, do you or does anyone have suggestions for a Cricket ROM having just a stock Sprint Touch? Thanks in advance.

phigan said:
Please post anyway how to get GPS working with a Cricket ROM.. Also, do you or does anyone have suggestions for a Cricket ROM having just a stock Sprint Touch? Thanks in advance.
Click to expand...
Click to collapse
I will post you a nice tutorial tomorrow for the GPS and if you PM or post your email I will send you one of my cricket custom ROMS for the touch.

cricket ROM and tutorial
I have included a custom ROM in this tutorial
1st off credit is due to those that wrote these programs I only take credit for putting this all together.
#1 use msl grabber to get the msl/spc code found here
http://forum.ppcgeeks.com/showthread.php?t=43560
install via activesync or sd card and run on ppc.
#2 unlock with the 2.31 unlocker listed here
http://forum.ppcgeeks.com/showthread.php?t=20370
#3 flash this sprint 6.1 ROM to update radio "WARNING DO NOT LET CUSTOMIZATION RUN" SOFT RESET WHEN IT SAYS AUTO CUSTUMIZATION IN 3 SECONDS. This is for GPS1 to work.
http://www.htc.com/us/SupportDownloa...cat=2&dl_id=66
To do this connect USB to computer then Press power camera and Reset to get to bootloader red green yellow screen and connect to cable then run the exe file. DO NOT LET CUSTOMIZATION RUN SOFT RESET WHEN IT SAYS CUSTOMIZE IN 3 SECONDS.
#4 Go to the following and download from windows drivers and unlocking tools
http://www.4shared.com/dir/13898363/...4/sharing.html
QPST
windows htc driver
activesync4.5
Ryanmogul diagnostics shortcuts
download the following
http://www.4shared.com/file/10597370...HMregedit.html
http://www.4shared.com/file/94425441...t5_0_31_7.html
Install Ryans diagnostics on ppc
Install QPST on computer
Install htc drivers on computer
Put phone into diag mode & connect to computer. computer should connect and find new device
run QPST configururation and add new port till you find your phone.
Now in QPST run from top menu start clients service programing.
Select phone
Read from phone imput spc/msl code from the grabber.
Then enter 000000 in the service programing field.
Write to phone
now while in QPST lets get your GPSone ste up for cricket.
Go to the GPS1 tab and uncheck all the boxes then recheck them.
then enter the following
pde ip address 117.29.223.11
pde port # 8080
pde transport IP
Position calculation mobile
Write to phone
close out
I would recommend now to flash a custom ROM here is a link to one of mine. http://www.4shared.com/file/135174580/27254c16/VOGUIMG.htmlinstall on a FAT32 formated 2gig or less msd card and rename to VOGUIMG.NBH THEN INSERT CARD AND PUT PHONE INTO BOOT LOADER AND FOLLOW INSTRUCTIONS.
You will need a cricket PRL to load through PST setting.
then go to this thread it will help you set up your pst setting correctly.
http://forum.xda-developers.com/showthread.php?t=492824 *NOTE* In some cricket markets you will need to change from EVRC to VOICE 13K to make outgoing calls. YOU CAN ALSO DOWNLOAD THE MMS CAB FROM HERE and then
Install the cricketwapmms cab
Do not try to open a data connection untill you have cricket service on the phone.
To authinticate your user name 10digit#@mycricket.com
you must have service.
Just a couple notes to have Email and push services work you MUST have the $15.00 HTML plan on your account and your phone must be listed in the system as a QA4 Evoke.
GPS may Require priming unless you use Ryans Googlemaps.cab
Credits go to ImCokeMaN for the unlocker and his great tutorial
and Ryanmogul6800 on XDA for his great software and his perfect PST setting.
Please let me know if this helped any or if I can be of any further assistance.
__________________

My GPS is working, But I had help there a guy in omaha that did it and it's running nice.

Good glad you got it running Also if you wanted push email to work there is a program called funambol that works ok with cricket.

hi i am tryin to get the gps running using your fix but all of the links are not working when i click on them but just to tell you what im working with i have the sprint vogue flashed to cricket and im running the new nsfan wm6.5 v16 rom and when i try gps viewer i cant find a fix, so is it the rom maybe cause my radio is 3.42.50....so can you point me in the right direction cause my phone is amazing but the gps is a setback and this is something that i really want spent weeks looking for something so thanks for all of your help

I apologize for that I don't know why they don't work here is the GPS1 setting that need to be entered in QPST. Your radio version is good to go for GPS.
while in QPST lets get your GPSone ste up for cricket.
Go to the GPS1 tab and uncheck all the boxes then recheck them.
then enter the following
pde ip address 117.29.223.11
pde port # 8080
pde transport IP
Position calculation mobile
Write to phone
It looks like you have a good rom to be using so most of the links you don't really need.
Links you may need are below and they do work I just checked.
QPST http://www.4shared.com/file/101893747/6958b637/QPST_v27_Build_301.html
HTC driver http://www.4shared.com/file/101893703/a59b72a/WindowsHTCdrivers.html
Diagnostics shortcuts http://www.4shared.com/file/101893721/d661b484/RyanMogul_Diagnostic_Program_Shortcuts.html

thanks so much u will try it now and get back to you

SOLVED: FAKE IMEI after flash, shows 00000000

Hello all,
as title today flashed my phone to get new 7.8 dynamic rom
flash goes well
but after hard reset the phone shows invalid sim card
and imei shows 000000000 (code *#06#)
any idea?
i found a guide here to use QPST but is for samsung SIII
and the 8700 have different engineering menu code...
Please save me ((

***SOLVED***
the solution is app diagnosis
enter in diagnosis dialling the code ##634##
then *#7284#
and select
Modem, Usb Diag
restart the phone and follow the guide here
thanks to Hero for the guide

This may be little bit nooby but discussing on flashing imei's is not a bit illegal-ish? It's not like jailbreaking or any kind of alteration don't you think?

i think so,
in fact i posted a link and not the entire guide
... in any case, it's not so easy to change the imei on your phone and make it functionally.
you need an imei code there is not in use in your country by another phone
and an imei phone a phone like yours according with product type.
there is a function called:
"auto provisioning"
you see you receive, with some carriers, automatic mms and internet configuration at first access?
gsm cell identify and decrpt your imei and give this info to carrier.
hope this can helps

How to connect to a CWMP Server Huawei Router

Hello,
Recently i got root access to my modem Huawei HG532e using telnet and the "welcome to shell" string with help from one member of this forum, thank you for that i you are reading this
Now, checking all the things inside de modem's filesystem i found that in the curcfg.xml file in the modem is the CWMP TR-069 configuration to connect to the ACS server, the XML contains the URL cwmp.telmex.com and the username and password.
I had success changing the CWMP server for a fake one using a PERL script in my Kali virtual machine, i could get the Inform response from the CPE or the modem with some valuable information about the modem and system.
Now what i want is to connect to the real server using the credentials in the XML, i heard about some TR-069 Client implementations and Server ACS implementations but i had not success trying to connect to cwmp.telmex.com, i entered the credentials but when it loads i get an error saying that the servlet does not accept the GET method, and through POST i get nothing but a blank page.
Any ideas of what can i do to successfully connect to the ACS Server and weather it is going to be helpful to get some extra information, i mean, i heard about one 2wire modem that TELMEX used a few years ago that allowed access to a "secret" site/port to manage the modem remotely, i would like to know if it is possible to do the same for the HG532e modem that a i currently have

Huawei P10 lite no service

Urgent matter. I bought a huawei P10 lite from another person, I performed a hard reset and when I finished I can't get any signal on my device. It reads no service or emergency calls only. I tried everything on the net but nothing. The code *#*#4636#*#* doesn't work. The code that does work is *#*#6130#*#* but it's not very helpful. Can anyone help me to turn the radio on. Which code are for this process. Please send me solutions because it's urgent because I can't use my device.

Most likely, the phone is Locked to some mobile carrier.
Unfortunately there is no free way to unlock it!!!
About 3 weeks ago I had the same problems with P8Lite.
Paid solution:
- Go to https://www.dc-unlocker.com/buy and buy 3 credits (3 Euro) and create new account
- After a successful payment on your email you will receive Username and Password (check the Spam folder)
- Download HCU Client - https://hcu-client.com/download/
- Login with your Username and Password
- Put your P10Lite in the Manufacture mode
- Type this: *#*#2846579#*#*
- Go to ProjectMenu -> Background settings -> USB ports settings -> Manufacture mode
- Then connect the phone to PC via USB cable
- Press Read Phone Info
- Go to tap Unlock and press Direct SIM Unlock
- Finally, on the right side you should see Unlock done and the phone will turn off
- Turn on your phone and it will be unlocked.
Tested and works on P8 Lite, HCU cliend support P10 Lite and you can unlock it.

I think that it isn't locked because I tried with 3 different sim cards each in different mobile network.

I am still waiting for solutions. Thank you.

Some problem with IMEI or OEMinfo maybe ?.. try flash new FW

Still the same problem. Does anyone knows the shortcut to engineer mode? The new code because I found on the net some old codes but they didn't work.

There is no engeneering mode in P10 lite.
But as I said, I'm almost sure that phone is locked. Ask the previous owner what SIM card (mobile carrier / country) was used.
There is one other menu that is ProjectMenu
Insert you SIM card and check you SIM Lock status:
*#*#2846579#*#*
ProjectMenu -> Network Information Query -> SIM Lock Info
If you get "SIMLOCK_DEACTIVATE" then all it's okay and your phone isn't locked. But that means you probably have other big problems!
Can your phone has physically malfunction? Sim slots problem?
Also why you didn't test the phone before buying it?
Have you thought about mobile repair service?

Still the same problem
I installed a new software using update option and I get signal for five minutes but I wasn't able to use it because it didn't connect to network, then the no service and emergency calls only appear, oscillating between sim cards. The sim cards used are in different mobile service.
If I install Oreo the problem could disappear?
If so can anyone send me the link that I can download and install using update.app method?
If not could you suggest me a different solution.

Now shows that it's charging but the percentage of the battery drops.
Could be the same software problem?