Hello,
If anyone can backup their OEMINFO.img and send it to me or tell me how to extract oeminfo from a twrp backup please reply.
I prefer it to be europe model.
I kinda want to go back to stock but i flashed the wrong oeminfo and can't find the image file for the huawei p10 lite.
Here is European verisions (C432):
Single Sim LX1 (3GB RAM) - https://mega.nz/#!6QBSgSST!pZ0rTQ524bswjVZZqbBgXFug3srrDJ2rVUaIbn1lkgU
Dual Sim LX1 (3GB RAM) - https://mega.nz/#!ycpRnSqS!EW5acd5iYDofDGh4zGbWkWXvQwAnPORZB_FKv7KtRP0
Single Sim LX1A (4GB RAM) - https://drive.google.com/file/d/0B-k_1rnfFeEvTjkyLXNSVjVTSm8/view
Dual Sim LX1A (4GB RAM) - https://drive.google.com/file/d/0B-k_1rnfFeEvdWxZZE1tNWwwOHM/view
Download files, unzip it, go to TWRP -> Restore
Related
Hi
I have a p8 lite single sim B181. I want to flash to B170 dual sim. Can anyone tell me the steps? ADB flashing or SD flash is OK.
I already flashed another p8 from B133 to B170 with several steps. Is this possible heute too? Direct flashing would be much easier.
Thanks for help.
Will u plz help me to go Dual sim version from B133??
Same AS going from B181. B041c than b052 and ota 170. b041c with ADB flash. B052 SD flash
show this thread and go from step 1 to step 4 update 188 and you have dual sim firmware.
------> http://forum.xda-developers.com/p8lite/general/huawei-p8-lite-android-6-0-marshmallow-t3309796
Hey guys, after i unbrick my phone with one of the pe lite's version available in the web, it's written in the case of version 'NRD90M test-key', for fix this problem I decide the flash the oeminfo, but unfortunately that just get worse, undetected sim card, inability to unistall and even the inability to access the developer settings to unlock oem, I've tried to dload the same version as the oeminfo, but in vain, dload fail.
So the question is, why the dload failed and how to fix the problem, maybe I have an old sd card (class 4)? (I've a p9 lite l21)
Thank you in advance guys !!!
Up
Did you flash the correct oeminfo? It might the problem, check it
I didn't flash the correct oeminfo of the original version of my phone but I tried to flash a l21 oeminfo and update my phone to the same version. I didn't see a problem with that because it's the same hardware.
Try the official rollback package
Hi,
I got a huawei P10 lite locked in demo mode (coming from a commercial center demo product)
I unlocked OEM, open bootloader, installed TWRP (hope mine is the last), and I forgot to backup demo rom before trying to install a stock.
At this time, I can :
- enter TWRP
- enter Huawei recovery (but does update anything in wifi)
- enter bootloader to use fastboot.
My model is a :
WAS-LX1A on C652B101
I downloaded stock firmware posted 4 days ago, (http://bit.ly/2mcaPDA) and choose France Bytel (WAS-LX1AC530B171).
I put the update.app in a dload folder in my microSD card. I tried to update with vol+ vol- power.
I got a failed error
I download too WAS-LX1AC530B170 and got the same problem. I supposed it was because it wasn't the same country code (mine seems to be 652 right ?)
Finaly I found a supposed compatible version on (http://bit.ly/2hqbOOW) named : Full Firmware-mf WAS-LX1AC652B130 and a second one named Ota Update-mf WAS-LX1AC652B130.
I extracted update.app and put it in a dload folder and did not succed in upgrading.
My question is : Have I forgotten something ? Or is this demo model locked to be upgraded ?
Finaly, is there a backuped rom usable with TWRP to be restored ? (like I saw with the P8 lite 2017)
Thanks in advance, for your help, and my appologies for my very poor english writings
Man i recommend backup only oeminfo, copy c432 and restore, then with servicerom b182(ds) or b183(ss) copy update.app + all was folders inside dload to dload folder inside sdcard
Don' waste your time with vendors+huawei
foliaje said:
Man i recommend backup only oeminfo, copy c432 and restore, then with servicerom b182(ds) or b183(ss) copy update.app + all was folders inside dload to dload folder inside sdcard
Don' waste your time with vendors+huawei
Click to expand...
Click to collapse
Thanks for your quick answer.
Can you give me precisions plz ?
- backup only oeminfo ? You means backup with my twrp ?
- copy C432 and restore, you means download a stock c432 and restore it with twrp ?
- 3rd part is ok
lebeneur said:
Thanks for your quick answer.
Can you give me precisions plz ?
- backup only oeminfo ? You means backup with my twrp ?
- copy C432 and restore, you means download a stock c432 and restore it with twrp ?
- 3rd part is ok
Click to expand...
Click to collapse
Yeah you make a backup with twrp in your sdcard(copy to safe place), then copy/replace c432 and press restore.
Ok fine !
Have you got a link for the C432 wich could be copied or restor with TWRP ?
thanks
Here you can download dual or single,
if you can acess to settings<about phone therw you have the imei(s), or too looking in the box https://forum.xda-developers.com/p10-lite/how-to/huawei-p10-lite-oeminfo-collection-t3670325
Ok !
Just to be sure, there is no problem to use a servicerom LX1 to repair mine wich is a LX1A ?
lebeneur said:
Ok !
Just to be sure, there is no problem to use a servicerom LX1 to repair mine wich is a LX1A ?
Click to expand...
Click to collapse
we'll never try lx1 on lx1a device i dont want brick my device, just copy to dload folder in sdcard update.app and all was folders
LX1A
X means some number such as 0 or 2.
L21 dual SIM.
L01 single SIM
A is mark for 4gb model.
Great ! All seems clear. I will try this evening and will come back to informe you about the results.
Is the old oeminfo usefull after a successful restoration or can I keep the one I used in your sample ?
lebeneur said:
Great ! All seems clear. I will try this evening and will come back to informe you about the results.
Is the old oeminfo usefull after a successful restoration or can I keep the one I used in your sample ?
Click to expand...
Click to collapse
in post #4 i recommend copy to safe place before do anything, anyway usefull is but yo'll need a full backup, i dont know restore the mobile with ff
c432 is free nothing of vendors such as Vodafone, i dont know c652 where is so take care
All worked perfectly as you said ! Thank you very mutch sir !
Hi,
I have L01C55 (wich is TIM branded Huawei Nova).
I wold change the custom.bin and oeminfo.img for Europe.
Have you got custom.bin and oeminfo.img for Europe?
Thanks
rintintin78 said:
Hi,
I have L01C55 (wich is TIM branded Huawei Nova).
I wold change the custom.bin and oeminfo.img for Europe.
Have you got custom.bin and oeminfo.img for Europe?
Thanks
Click to expand...
Click to collapse
Never ever ever ever flash any other phone's oeminfo.img into yours! Never! If you dont want to hang your phone onto your wall as an accessorie I flashed mine yesterday now i only have serial number changed Bootloader Locked and thus un fixable phone...
OK Thanks,
Do you know a program to change phone country & vendor?
rintintin78 said:
OK Thanks,
Do you know a program to change phone country & vendor?
Click to expand...
Click to collapse
There's a paid solution called HCU Client but it also did not work for my CAN-L01C464 device thus i can not recommend it I have changed OEMINFO with UMTS Repair functionality of HCU Client during my timed licence period, it changed info successfully to C432 but unfortunately my phone did not boot with C432 roms, i tried many of them including B142 version full firmware... So i reverted back my oeminfo twrp backup and flashed back my C464B330 firmware back putting my self back into square 1
huawei nova Plus MLA-L11 Official firmware? 4.1? with cust and product file?
Just because i have a problem my phone is stuck on bootloop and when i flash system boot and recovery file using adb there's 2 other problem there's no cust and product file in any firmware i had try 3 or 4 firmware from Update finder and also from Some websites but there is not cust and product file In Update.app
am using huawei firmware extractor for extracting update.app
rintintin78 said:
Hi,
I have L01C55 (wich is TIM branded Huawei Nova).
I wold change the custom.bin and oeminfo.img for Europe.
Have you got custom.bin and oeminfo.img for Europe?
Thanks
Click to expand...
Click to collapse
this process only work in kirin devices, in snapdragon devices you need edite your oeminfo with hexadecimal editor and whit caution
Hi,
Have been messing around lately, but have bought a new phone now so I want to restore this one to its original stock rom.
I have the L31C432 dualsim version, but after I did a wrong flash, It now stands on L31C900B160.
I want to restore it to a stable version for L31C432...
Phone is unlocked and rooted and have TWRP installed.
(in P9 toolkit I see is it missing custom.bin , local.prop (Pro-Mode & App-Twin , It also says the model is a VNS-L11)
Can anyone help me restoring it please ?
Thanks