Related
(Previous rom Android 5.1.1, EMUI 3.1, (EMUI3.1_PE-TL10_6.1.1, Ver. CUSTCHNC00D672)
HELP
I've completed this step
Created Folder dload with ROM on phone
1) unlock bootloader (Honor Multi Tool with SuperSu folder on phone).
NO TWM or ROOT
(Up to STEP 5)
http://forum.xda-developers.com/honor-6/development/honor-6-rooting-method-t2962795
2) Unbrick with ROM for Europe B571 file (done, no problem)
ROM http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v55895/f1/full/update.zip
to end Phone has rebooted.
Freeze on HONOR LOGO. STOP
I tried with VOL down, VOL up and power to flash ROM, but it fails (!!!)
Installing update stops at 4% : "installing update" - "Software install failed"
Any solution?
Now the phone is always turned on with logo HONOR and if I turn power off it restarts
Let me explain:
Procedure performed
1) Connect phone USB cable to PC
2) ROM Europe B571 in "dload" folder phone
7) Turn OFF phone, afte press Volume - and Power together
8) Phone must boot in to fastboot mode, where write Phone locked
9) Run Multi-Tool for unlock Bootloader
10) Choose 1: Bootloader, after 2: Unlock Bootloader, with unlock code.
12) Choose "Unbrick", 2: Continue and wait when all parts write to the phone. All ok
reboot phone itself. Honor logo on boot display. STUCK
does not turn off anymore. I'll wait until it drains the battery
Now with hold on power button It shut off but then restarts immediately.
I try to flash ROM but it failed.
If I connect the phone with usb, I no longer see the phone's storage unit
It's ruined now?!
A real tragedy! Please help.
(It would have been better to keep the stock rom 5.1.1)
Is B571 a marshmallow ROM?
Sent from my H30-U10 using Tapatalk
hamzio7 said:
Is B571 a marshmallow ROM?
Sent from my H30-U10 using Tapatalk
Click to expand...
Click to collapse
It shoud be a Android 6.0 so yes, MM
But Is Honor Multitools compatible?
Because or ROM for Europe B571 is corrupt
or Multitools is not compatible with release 6
Unbrick procedure was perfect.
caracal reloaded said:
It shoud be a Android 6.0 so yes, MM
But Is Honor Multitools compatible?
Because or ROM for Europe B571 is corrupt
or Multitools is be a Android 6.0 so yes, MM
But Is Honor Multitools compatible?
Because or ROM for Europe B571 is corrupt
or Multitools is not compatible with release 6
Unbrick procedure was perfect.
Click to expand...
Click to collapse
You can't unbrick using marshmallow...so go ahead and download the lollipop version and unbrick using it
Sent from my H30-U10 using Tapatalk
Ok, but for to install MM? Have I to install Europe 5.1.1 and than normal upgrade to Android 6 (rom EU 571). Right?
My phone has China rom
Do you know link for Europe 5.1.1 Rom? (Previous of 571)
My phone needs to be running one of the following builds to upgrade to PE-TL10C900B571 manual mode:
» PE-TL10C432B560 Android 6
» PE-TL10C900B521 Android 6
» PE-TL10C900B331 Android 5
Where I can found compatible EU version for Honortools? I cannot found EU official site
For unbricking you don't need the exact China ROM...any lollipop ROM for your phone will work...
Sent from my H30-U10 using Tapatalk
---------- Post added at 03:50 PM ---------- Previous post was at 03:46 PM ----------
You can find your desired ROM on Huawei's site...
Or you can try this link
http://dl.downloadrom.ir/huawei/Honor6Plus-TL10_C900B332_5.1.1_downloadrom.ir.zip
Sent from my H30-U10 using Tapatalk
hamzio7 said:
For unbricking you don't need the exact China ROM...any lollipop ROM for your phone will work...
Sent from my H30-U10 using Tapatalk
Click to expand...
Click to collapse
I will try B331 unbrick
Next step, manual B571
Xfingers
UPDATE (BAD NEWS)
1) I have installed B331 on china ROM. Multitools Unbrick (perfect)
2) reboot
3) Playstore was not working. Phone interface OK
4) I tried to flash from update section B571 (6.0). FAILED
5) rebot and I tried hard reset on setup section
6) Hard reset failed at 3%
7) Reboot, setup phone.
Now is a standard phone, the Huawei customizations are gone, there is no 4G date tag, icons are larger and the background is the envy of Gingerbread release. No huawei tools
Any solution?
I have performed a new unbrick with file B331, but nothing has changed.
Boot is regular, app, but the interface now is not customized by huawei. It is raw stock. Bad impression
How to do to install the B571 (6.0)? Or fix it?
The problem was on rom B331. I had done a reset from setting panel.
Reset Failed to about 2%
Reboot. Same problem
And following step:
I tried to re-unbrick with your link B332
http://dl.downloadrom.ir/huawei/Hono...loadrom.ir.zip
Unfortunately, the problem remained. Huawei is gone. Standard keyboard stock. Huawei keyboard is not listed. No folder Huawei and some tools, No 4G icon on shortcut and impossible to add it. There is not
No voice on gesture control panel blank screen
Now release rom is B332. But it is indecent
I tried also to install B571 6.0 (local mode) but installation failed
SCREENSHOT : https://s17.postimg.org/gyeybgsa7/Screenshot_2016_11_12_11_40_03_1.png
I can help you... since you are now on b331
the problem is...that your phone doesn't recognize the cust partition...
It's easy. you only need to flash the proper oeminfo zip file using a custom recovery..
I think your phone oeminfo is cn or china unicom i am not totally sure but you can check by dialing this
*#*#2846579#*#*
Find oem info
And see if it is as i mentioned...
If it is you have to flash (normal or eu) oeminfo zip file and then you can update to (eu or normal) marshmallow.
Sent from my H30-U10 using Tapatalk
---------- Post added at 08:42 PM ---------- Previous post was at 08:36 PM ----------
I think C900 is for the normal oeminfo and the C432 is for eu...
You can find the flashable oeminfo zips by googling them...
Or follow this guide
It's the same for all Huawei phones
http://www.carbontesla.com/2015/09/how-to-change-region-of-your-huawei-honor-4c-root/
Sent from my H30-U10 using Tapatalk
hamzio7 said:
I can help you... since you are now on b331
the problem is...that your phone doesn't recognize the cust partition...
It's easy. you only need to flash the proper oeminfo zip file using a custom recovery..
I think your phone oeminfo is cn or china unicom i am not totally sure but you can check by dialing this
*#*#2846579#*#*
Find oem info
And see if it is as i mentioned...
Click to expand...
Click to collapse
I don't see oem info.
I see this menu:
1) Backgroud setting
2) Veneer information > a) Version info b) Apparatus info c) Manufacture info d) Other info 5) verify key
3) Network information query
4) software upgrade
5) restore factory
6) battery charge
If it is you have to flash (normal or eu) oeminfo zip file and then you can update to (eu or normal) marshmallow.
Click to expand...
Click to collapse
I have dowloaded "oeminfo.zip"
https://mega.nz/#!6h830BQK!yzuSX7ron9pMTLPxLbd3KGxfr9kEpaVj5QsSUGdLA88
I think C900 is for the normal oeminfo and the C432 is for eu...
You can find the flashable oeminfo zips by googling them...
Click to expand...
Click to collapse
I did:
"Step 1: First of all, find out your current vendor/country info. One way to do this is by dialing *#*#2846579#*#* – from the menu that pops up go to Network Information > Vendor/Country Info. Some of the vendors/countries are"
On my phone I see: VENDOR COUNTRY INFO: Vendor: Country file not exist Country: Vendor Country file not exist."
Or follow this guide
It's the same for all Huawei phones
http://www.carbontesla.com/2015/09/how-to-change-region-of-your-huawei-honor-4c-root/
Sent from my H30-U10 using Tapatalk
Click to expand...
Click to collapse
" For example, if I were moving from Pakistan to Malaysia, I’d clear “hw/meafnaf” from custom.bin and insert “hw/spcseas” instead."
but How do I know the codes?
I must to root my phone before?
And, assuming that I can, I redo unbricking with Multitools?
Thanks!!
Are you sure that It is a region code problem?
Because now I unbrick to previous China romm 5.11 (89 app on upgrading, at boot) but still it looks like before. The gesture are not. Duble tap missing. Keyboard huawei missing
Strange because they are tools that are in rom
Perhaps with the hardreset it was deleted something definitely.
Can someone tell me vendor/country for EU?
I know only following country.Procedure
Step 1: First of all, find out your current vendor/country info. One way to do this is by dialing *#*#2846579#*#* – from the menu that pops up go to Network Information > Vendor/Country Info. Some country:
hw/spcseas – Malaysia
unicomelectric/cn – China
hw/meafnaf – Pakistan
mts/by – Belarus
I think I have to go with change region
In your opinion how can I do to fix actual china rom with keyboard, gesture etcc... missing?
Just extract the oeminfo zip file and copy your desired region zip (i.e normal oeminfo.zip)
to your phone and flash it with custom recovery... after that your phone region will change and you can flash marshmallow through local update...
Sent from my H30-U10 using Tapatalk
but oeminfo has four file
dir "by" > oeminfo
dir "my" > oeminfo
dir "pk" > oeminfo
dir "ru" > oeminfo
For europe?
---
Note
Still I do not understand why after flashing some ROM europe, with problems,
now I flashed (unbrick with Multitool) the latest china rom still missing parts (i.e. phone gesture, setup panel: blank)
If the phone is China and the rom is China (5.1.1), should not be a full installation 100% complete?!?!?!?!?
caracal reloaded said:
but oeminfo has four file
dir "by" > oeminfo
dir "my" > oeminfo
dir "pk" > oeminfo
dir "ru" > oeminfo
For europe?
---
Note
Still I do not understand why after flashing some ROM europe, with problems,
now I flashed (unbrick with Multitool) the latest china rom still missing parts (i.e. phone gesture, setup panel: blank)
If the phone is China and the rom is China (5.1.1), should not be a full installation 100% complete?!?!?!?!?
Click to expand...
Click to collapse
If the vendor is unknown the cust partition won't get recognized and the phone will look ugly and all of the customized apps won't be there...(Huawei swype an etc) apps won't get installed...you have to make sure that the folder in the cust/hw/xxx is the same as your vendor information...
Sent from my H30-U10 using Tapatalk
caracal reloaded said:
I don't see oem info.
I see this menu:
1) Backgroud setting
2) Veneer information > a) Version info b) Apparatus info c) Manufacture info d) Other info 5) verify key
3) Network information query
4) software upgrade
5) restore factory
6) battery charge
I have dowloaded "oeminfo.zip"
https://mega.nz/#!6h830BQK!yzuSX7ron9pMTLPxLbd3KGxfr9kEpaVj5QsSUGdLA88
I did:
"Step 1: First of all, find out your current vendor/country info. One way to do this is by dialing *#*#2846579#*#* – from the menu that pops up go to Network Information > Vendor/Country Info. Some of the vendors/countries are"
On my phone I see: VENDOR COUNTRY INFO: Vendor: Country file not exist Country: Vendor Country file not exist."
Or follow this guide
It's the same for all Huawei phones
" For example, if I were moving from Pakistan to Malaysia, I’d clear “hw/meafnaf” from custom.bin and insert “hw/spcseas” instead."
but How do I know the codes?
I must to root my phone before?
And, assuming that I can, I redo unbricking with Multitools?
Thanks!!
Click to expand...
Click to collapse
If this really can be fixed by the oeminfo zip file I'll let you know. Because on my phone I have the same vendor country file not exist error. Let me try fixing it on mine and tell you how i did it
---------- Post added at 08:43 PM ---------- Previous post was at 08:28 PM ----------
hamzio7 said:
I can help you... since you are now on b331
the problem is...that your phone doesn't recognize the cust partition...
It's easy. you only need to flash the proper oeminfo zip file using a custom recovery..
I think your phone oeminfo is cn or china unicom i am not totally sure but you can check by dialing this
*#*#2846579#*#*
Find oem info
And see if it is as i mentioned...
If it is you have to flash (normal or eu) oeminfo zip file and then you can update to (eu or normal) marshmallow.
Sent from my H30-U10 using Tapatalk
---------- Post added at 08:42 PM ---------- Previous post was at 08:36 PM ----------
I think C900 is for the normal oeminfo and the C432 is for eu...
You can find the flashable oeminfo zips by googling them...
Or follow this guide
It's the same for all Huawei phones
http://www.carbontesla.com/2015/09/how-to-change-region-of-your-huawei-honor-4c-root/
Click to expand...
Click to collapse
This doesn't apply to this phone. At least not my honor 6. There's no custom.bin file in /data.
---------- Post added at 08:45 PM ---------- Previous post was at 08:43 PM ----------
caracal reloaded said:
but oeminfo has four file
dir "by" > oeminfo
dir "my" > oeminfo
dir "pk" > oeminfo
dir "ru" > oeminfo
For europe?
---
Note
Still I do not understand why after flashing some ROM europe, with problems,
now I flashed (unbrick with Multitool) the latest china rom still missing parts (i.e. phone gesture, setup panel: blank)
If the phone is China and the rom is China (5.1.1), should not be a full installation 100% complete?!?!?!?!?
Click to expand...
Click to collapse
Usually a factory reset fixes this but I see your factory reset doesn't work
https://mega.nz/#!JUxHSYbb!LISC6PkXuFV8phHsPIISBm1fiwkrCoFHrErwPuooPvE
Download this file and flash it with custom recovery
Then your vendor information will show normal
Sent from my H30-U10 using Tapatalk
I tried factory reset on EU rom. Failed.
Now I have China Rom 5.1.1 (with problems), but I can carry out factory reset again with this China Rom....
Right? I would not have more problem with new factory reset
Perhaps It works...
If it doesn't works I am going to flash with your custom recovery.
Can you give my link for custom recovery procedure?
My phone doesn't have root, only unlock bootloader with unbrick multitools
Thanks
hamzio7 said:
https://mega.nz/#!JUxHSYbb!LISC6PkXuFV8phHsPIISBm1fiwkrCoFHrErwPuooPvE
Download this file and flash it with custom recovery
Then your vendor information will show normal
Sent from my H30-U10 using Tapatalk
Click to expand...
Click to collapse
Version?
Hey guys, i need some experts. Anyway, i own p9 lite L31C440B160 and i want to update to nougat, badly. However, i cant find any firmware with my number c440, does it even matter?
Can you please help me update to b370 or similar. I need it badly. Also, do i need to unlock bootloader on my p9 lite to flash custom roms?
btw, my phone is vendor:ee country:gb
faruk.foco said:
Hey guys, i need some experts. Anyway, i own p9 lite L31C440B160 and i want to update to nougat, badly. However, i cant find any firmware with my number c440, does it even matter?
Can you please help me update to b370 or similar. I need it badly. Also, do i need to unlock bootloader on my p9 lite to flash custom roms?
btw, my phone is vendor:ee country:gb
Click to expand...
Click to collapse
You have to debrand your phone...
That presume: unlock bootloader + twrp + root + (prepare in dload folder a C432 - B160/B161 firmware) + flash oeminfo C432 + repair firmware with dload folder.
It is a lot to do and somethings may goes wrong resultin in bricking your phone...
If you assume the risks, after that you have a C432 - B160/B161 phone which can be updated to B370/B371 via Firmware Finder.
gtdaniel said:
You have to debrand your phone...
That presume: unlock bootloader + twrp + root + (prepare in dload folder a C432 - B160/B161 firmware) + flash oeminfo C432 + repair firmware with dload folder.
It is a lot to do and somethings may goes wrong resultin in bricking your phone...
If you assume the risks, after that you have a C432 - B160/B161 phone which can be updated to B370/B371 via Firmware Finder.
Click to expand...
Click to collapse
Soooo all in all its not worth it? Thank man anyway...
faruk.foco said:
Soooo all in all its not worth it? Thank man anyway...
Click to expand...
Click to collapse
You have to decide if worth or not...
gtdaniel said:
You have to decide if worth or not...
Click to expand...
Click to collapse
Since you are here and obviously know a lot more about p9 lite than me, can you please find me a guide to do stuff that you told me to do. I know it's a lot to ask for, but I've been grinding all week trying to find guides etc and couldn't. Thanks in advance!
faruk.foco said:
Since you are here and obviously know a lot more about p9 lite than me, can you please find me a guide to do stuff that you told me to do. I know it's a lot to ask for, but I've been grinding all week trying to find guides etc and couldn't. Thanks in advance!
Click to expand...
Click to collapse
What you have to do i already said but you have to read arround here to do followings...
1. From anywhere you are (B336, B329, B170-160-130) you have to prepared in dload folder a B160/B161 stock firmware (B160 for Dual Sim, B161 for Single Sim).
2. Flash oeminfo/custom.bin (for SS phone or DS phone ) for your phone localisation: C150, C185, C432.
3. After that firmware become corrupted and need to be repaired from dload folder via 3 keys pressed / dialer code / emui error message.
4. Once you have a functional B160/B161 firmware install Firmware Finder (+proxy addon) and check <Use new firmware> and <Use system updater>.
5. Reconfigure WI-Fi connection from indications in Firmware Finder Proxy.
6. Search for B370/B371 firmware (B370 for DS, B371 for SS) of 1,94 Gb size for your phone localisation and send it to updater.
7. From there it is downloaded, verified and reboot to emui updater wich make his work and bring you B370/B371 firmware.
PS: - for flashing oeminfo/custom.bin i recomand this tool which make that work just fine.
https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
- if you have a flash-able zip of oeminfo/custom.bin i recommend flashing with twrp.
gtdaniel said:
What you have to do i already said but you have to read arround here to do followings...
1. From anywhere you are (B336, B329, B170-160-130) you have to prepared in dload folder a B160/B161 stock firmware (B160 for Dual Sim, B161 for Single Sim).
2. Flash oeminfo/custom.bin (for SS phone or DS phone ) for your phone localisation: C150, C185, C432.
3. After that firmware become corrupted and need to be repaired from dload folder via 3 keys pressed / dialer code / emui error message.
4. Once you have a functional B160/B161 firmware install Firmware Finder (+proxy addon) and check <Use new firmware> and <Use system updater>.
5. Reconfigure WI-Fi connection from indications in Firmware Finder Proxy.
6. Search for B370/B371 firmware (B370 for DS, B371 for SS) of 1,94 Gb size for your phone localisation and send it to updater.
7. From there it is downloaded, verified and reboot to emui updater wich make his work and bring you B370/B371 firmware.
PS: - for flashing oeminfo/custom.bin i recomand this tool which make that work just fine.
https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
- if you have a flash-able zip of oeminfo/custom.bin i recommend flashing with twrp.
Click to expand...
Click to collapse
Thank you very much man!!
Vns p31c636b170 how to install naugat in this ,
if some have zip file link that's better, or any suggestions please
How can I debrand my phone ? I mean going from C02 to C432 ?
Can anyone point out the steps needed ?
Thanks
bunilla said:
How can I debrand my phone ? I mean going from C02 to C432 ?
Can anyone point out the steps needed ?
Thanks
Click to expand...
Click to collapse
Unlock bootloader + TWRP + root + flash oeminfo of C432 + repair firmware via dload folder.
gtdaniel said:
Unlock bootloader + TWRP + root + flash oeminfo of C432 + repair firmware via dload folder.
Click to expand...
Click to collapse
which option in the toolkit should be pressed to put Oeminfo,upgrade button or individual?
gtdaniel said:
Unlock bootloader + TWRP + root + flash oeminfo of C432 + repair firmware via dload folder.
Click to expand...
Click to collapse
I have L31 and I want to debrand it from C440 to C432. I did some research, but still I have some questions.
1. Unlock bootloader + TWRP + root - I found this https://forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
It's ok right ?
2. Flash oeminfo of C432 and this should be done by SRKTool and oeminfo I found there https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
3. repair firmware via dload folder - Unfortunately I don't know how to do it. In the instructions for p9, it was done also in SRKTools using "Install Recovery 6.0", but there P9Lite is not mentioned, how should I do ?
4. Install new ROM - I should install new ROM for c432, right ? It's using 3 button method ?
And that's all ?
smackedRico said:
I have L31 and I want to debrand it from C440 to C432. I did some research, but still I have some questions.
3. repair firmware via dload folder - Unfortunately I don't know how to do it. In the instructions for p9, it was done also in SRKTools using "Install Recovery 6.0", but there P9Lite is not mentioned, how should I do ?
4. Install new ROM - I should install new ROM for c432, right ? It's using 3 button method ?
And that's all ?
Click to expand...
Click to collapse
Regarding <3. repair firmware via dload folder>, you have to download stock firmware for C432 (B130/131 or B160/161 - depends what oeminfo you flash),
unzip update.app and copied on dload folder on microsdcard. Power off and power on with 3 key combination and repair start...
At the end you have a brand new C432B1XX phone...
gtdaniel said:
Regarding <3. repair firmware via dload folder>, you have to download stock firmware for C432 (B130/131 or B160/161 - depends what oeminfo you flash),
unzip update.app and copied on dload folder on microsdcard. Power off and power on with 3 key combination and repair start...
At the end you have a brand new C432B1XX phone...
Click to expand...
Click to collapse
And the bootloader should be locked, right ?
smackedRico said:
And the bootloader should be locked, right ?
Click to expand...
Click to collapse
Indeed, you lose bootloader unlock, twrp and root (if you have).
If now I have c440B160, and I place oeminfo for c432 do i have to install c432b160 or I can install c432b131, because I only found that version
I installed TWRP and Root, and now I don't know how to change oeminfo, because in srk is only p9,not p9 lite, and I downloaded package .zip and tried to install it by TWRP but it didn't work. How should i do this ?
Ministry of solutions has a full tutorial, I used it and it worked flawlessly
Sent from my HUAWEI VNS-L21 using Tapatalk
Ok, thank. That worked. But now I try to update phone by using firmware finder. It finds me a lot of versions and I downloaded the newest b381 full ota, and it failed, because something was wrong in that package
What u debranded to?
Sent from my HUAWEI VNS-L21 using Tapatalk
Now i have c432b160, at least it sey so. I used the ministry of solutions oeminfo and rom.
Now I use firmware finder to find new versions, and it finds me a lot of them so I send b381 full ota to updater, it downloads, and then reboots, but it find verification error. How to fix it, i want to update to emui 5.0. Now I have C432B160
smackedRico said:
I have L31 and I want to debrand it from C440 to C432. I did some research, but still I have some questions.
1. Unlock bootloader + TWRP + root - I found this https://forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
It's ok right ?
2. Flash oeminfo of C432 and this should be done by SRKTool and oeminfo I found there https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
3. repair firmware via dload folder - Unfortunately I don't know how to do it. In the instructions for p9, it was done also in SRKTools using "Install Recovery 6.0", but there P9Lite is not mentioned, how should I do ?
4. Install new ROM - I should install new ROM for c432, right ? It's using 3 button method ?
And that's all ?
Click to expand...
Click to collapse
Do not debrand to c432 in srktool hope you didnt do it in srktool the c432 i only for normal P9 i once misd flashed it and i got vns-c432b160 i didnt have l21 or 31 nor anything and it was a pain in the a s s to fix
Hello guys...
I'm so stupid that i was even trying to do something with my phone. I got P9lite from my local carrer (PLAY) (L21C900B160) and i was trying to debrand it. Bootloader is unlocked and i flash TWRP for install new oeminfo (i think i just downloaded wrong one). After that i wanted to reflash my soft via dload (L21C900B160) to same version. Then i realize that i can't do it coz "its not valid version, try correct version" (i was using same dload software before). After that i was trying to normal boot my phone but i have "Type password to decrypt storage" and i'm writing correct password and i see "DECRYPTION UNSUCCESSFUL. You entered the correct password but the data on your phone is corrupt. To resume Using your phone you must perform a factory reset [...]" and i'm doing it. Factory resed done "Successful" and i reebot my phone to set it up but i see always "Type password to decrypt storage". I can't use fastboot commands in fastboot/bootloader mode (even try to find out that my phone is still bl unlocked), and i cant do anything with it. I don't know what to do with this. Please help me guys
EDIT:
1. What can i do with it?
2. It was big mistake to flash oeminfo (c432) to my c900?
3 . Can anybody tell me what's wrong with this oeminfo zip? Added to download for you.
If you used a C432 OEMInfo you must download and install a firmware that is C432 and Marshmallow.. Say B120/B160 and try to flash it through 3 buttons method.. You should get a phone working
I was trying it but installation failed
karov_mm said:
Hello guys...
3 . Can anybody tell me what's wrong with this oeminfo zip? Added to download for you.
Click to expand...
Click to collapse
Your attach oeminfo is for VNS-L21 Dual Sim, and is fine.
That problem with error corrupted firmware is normal after you flash oeminfo...
Something else is going wrong...
You are sure that you put in dload folder on microsdcard update.app from VNS-L21C432B130 stock firmware?
gtdaniel said:
Your attach oeminfo is for VNS-L21 Dual Sim, and is fine.
That problem with error corrupted firmware is normal after you flash oeminfo...
Something else is going wrong...
You are sure that you put in dload folder on microsdcard update.app from VNS-L21C432B130 stock firmware?
Click to expand...
Click to collapse
Yea, but It was l21c432b160 not c130
karov_mm said:
Yea, but It was l21c432b160 not c130
Click to expand...
Click to collapse
That oeminfo i used many time to return from Nougat to MM, but with B130 firmware...
gtdaniel said:
That oeminfo i used many time to return from Nougat to MM, but with B130 firmware...
Click to expand...
Click to collapse
I'm gonna try one more time but I'm on job so it might be in 2 hours
Edit: so it's okay that I flash oeminfo for 130 in 160system?
karov_mm said:
I'm gonna try one more time but I'm on job so it might be in 2 hours
Edit: so it's okay that I flash oeminfo for 130 in 160system?
Click to expand...
Click to collapse
Is ok. Anyway after any oeminfo flash phone become corrupted...
Make sure you have in dload folder update.app from B130.
After flash oeminfo, power off phone and started with 3 keys combination.
gtdaniel said:
Is ok. Anyway after any oeminfo flash phone become corrupted...
Make sure you have in dload folder update.app from B130.
After flash oeminfo, power off phone and started with 3 keys combination.
Click to expand...
Click to collapse
Can you send me link for 160 update.app? I'm in job and it's hard to search anything on backup phone. I will download this update file and try to repair phone on break from job.
EDIT: I MEAN 130 UPDATE.APP FILE, MY BAD
karov_mm said:
Can you send me link for 160 update.app? I'm in job and it's hard to search anything on backup phone. I will download this update file and try to repair phone on break from job.
Click to expand...
Click to collapse
NOT B160 update.app!
B130 is ok!
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v54902/f1/full/update.zip
gtdaniel said:
NOT B160 update.app!
B130 is ok!
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v54902/f1/full/update.zip
Click to expand...
Click to collapse
Sadly installing still not working
karov_mm said:
Sadly installing still not working
Click to expand...
Click to collapse
What is going wrong?
Post some printscreen or pictures...
gtdaniel said:
What is going wrong?
Post some printscreen or pictures...
Click to expand...
Click to collapse
I can't now. I think i used oeminfo for l31. This is user-script file from .zip that i post before.
"ui_print("Flasheando OEMInfo DUAL-SIM para P9Lite...");
ui_print("Realizado por BadWolf");
package_extract_file("oeminfoDUAL.img", "/dev/block/platform/hi_mci.0/by-name/oeminfo");
ui_print("Finalizado! Recuerda flashear ahora la ROM L31");
set_progress(1.000000);"
karov_mm said:
I can't now. I think i used oeminfo for l31. This is user-script file from .zip that i post before.
"ui_print("Flasheando OEMInfo DUAL-SIM para P9Lite...");
ui_print("Realizado por BadWolf");
package_extract_file("oeminfoDUAL.img", "/dev/block/platform/hi_mci.0/by-name/oeminfo");
ui_print("Finalizado! Recuerda flashear ahora la ROM L31");
set_progress(1.000000);"
Click to expand...
Click to collapse
Ok! Try with this oeminfo for VNS-L21 (Single Sim/Dual Sim)
Anyway, conform instructions from this post:
HOW TO DOWNGRADE FROM NOUGAT TO MM
VNS-L31
Look at that thread :
http://www.htcmania.com/showthread.php?t=1261335
VNS-L21 (THANKS TO @Johnny TDN )
1. flash TWRP(thanks to @BadWolfYe )
2. Flash this file
3. Put the MM UPDATE.APP in the DLOAD folder on EXTERNAL SDCARD
4. Install it using the 3 button method (dload method)
5. Factory reset
6. DONE!!
for VNS-L21 which i done 4-5 times for returning from Nougat to MM is one oeminfo which work for VNS-L21 who have in update script instructions for VNS-L31 and flash fine on VNS-L21...
Hi,
I got a huawei P10 lite locked in demo mode (coming from a commercial center demo product)
I unlocked OEM, open bootloader, installed TWRP (hope mine is the last), and I forgot to backup demo rom before trying to install a stock.
At this time, I can :
- enter TWRP
- enter Huawei recovery (but does update anything in wifi)
- enter bootloader to use fastboot.
My model is a :
WAS-LX1A on C652B101
I downloaded stock firmware posted 4 days ago, (http://bit.ly/2mcaPDA) and choose France Bytel (WAS-LX1AC530B171).
I put the update.app in a dload folder in my microSD card. I tried to update with vol+ vol- power.
I got a failed error
I download too WAS-LX1AC530B170 and got the same problem. I supposed it was because it wasn't the same country code (mine seems to be 652 right ?)
Finaly I found a supposed compatible version on (http://bit.ly/2hqbOOW) named : Full Firmware-mf WAS-LX1AC652B130 and a second one named Ota Update-mf WAS-LX1AC652B130.
I extracted update.app and put it in a dload folder and did not succed in upgrading.
My question is : Have I forgotten something ? Or is this demo model locked to be upgraded ?
Finaly, is there a backuped rom usable with TWRP to be restored ? (like I saw with the P8 lite 2017)
Thanks in advance, for your help, and my appologies for my very poor english writings
Man i recommend backup only oeminfo, copy c432 and restore, then with servicerom b182(ds) or b183(ss) copy update.app + all was folders inside dload to dload folder inside sdcard
Don' waste your time with vendors+huawei
foliaje said:
Man i recommend backup only oeminfo, copy c432 and restore, then with servicerom b182(ds) or b183(ss) copy update.app + all was folders inside dload to dload folder inside sdcard
Don' waste your time with vendors+huawei
Click to expand...
Click to collapse
Thanks for your quick answer.
Can you give me precisions plz ?
- backup only oeminfo ? You means backup with my twrp ?
- copy C432 and restore, you means download a stock c432 and restore it with twrp ?
- 3rd part is ok
lebeneur said:
Thanks for your quick answer.
Can you give me precisions plz ?
- backup only oeminfo ? You means backup with my twrp ?
- copy C432 and restore, you means download a stock c432 and restore it with twrp ?
- 3rd part is ok
Click to expand...
Click to collapse
Yeah you make a backup with twrp in your sdcard(copy to safe place), then copy/replace c432 and press restore.
Ok fine !
Have you got a link for the C432 wich could be copied or restor with TWRP ?
thanks
Here you can download dual or single,
if you can acess to settings<about phone therw you have the imei(s), or too looking in the box https://forum.xda-developers.com/p10-lite/how-to/huawei-p10-lite-oeminfo-collection-t3670325
Ok !
Just to be sure, there is no problem to use a servicerom LX1 to repair mine wich is a LX1A ?
lebeneur said:
Ok !
Just to be sure, there is no problem to use a servicerom LX1 to repair mine wich is a LX1A ?
Click to expand...
Click to collapse
we'll never try lx1 on lx1a device i dont want brick my device, just copy to dload folder in sdcard update.app and all was folders
LX1A
X means some number such as 0 or 2.
L21 dual SIM.
L01 single SIM
A is mark for 4gb model.
Great ! All seems clear. I will try this evening and will come back to informe you about the results.
Is the old oeminfo usefull after a successful restoration or can I keep the one I used in your sample ?
lebeneur said:
Great ! All seems clear. I will try this evening and will come back to informe you about the results.
Is the old oeminfo usefull after a successful restoration or can I keep the one I used in your sample ?
Click to expand...
Click to collapse
in post #4 i recommend copy to safe place before do anything, anyway usefull is but yo'll need a full backup, i dont know restore the mobile with ff
c432 is free nothing of vendors such as Vodafone, i dont know c652 where is so take care
All worked perfectly as you said ! Thank you very mutch sir !