Hello guys...
I'm so stupid that i was even trying to do something with my phone. I got P9lite from my local carrer (PLAY) (L21C900B160) and i was trying to debrand it. Bootloader is unlocked and i flash TWRP for install new oeminfo (i think i just downloaded wrong one). After that i wanted to reflash my soft via dload (L21C900B160) to same version. Then i realize that i can't do it coz "its not valid version, try correct version" (i was using same dload software before). After that i was trying to normal boot my phone but i have "Type password to decrypt storage" and i'm writing correct password and i see "DECRYPTION UNSUCCESSFUL. You entered the correct password but the data on your phone is corrupt. To resume Using your phone you must perform a factory reset [...]" and i'm doing it. Factory resed done "Successful" and i reebot my phone to set it up but i see always "Type password to decrypt storage". I can't use fastboot commands in fastboot/bootloader mode (even try to find out that my phone is still bl unlocked), and i cant do anything with it. I don't know what to do with this. Please help me guys
EDIT:
1. What can i do with it?
2. It was big mistake to flash oeminfo (c432) to my c900?
3 . Can anybody tell me what's wrong with this oeminfo zip? Added to download for you.
If you used a C432 OEMInfo you must download and install a firmware that is C432 and Marshmallow.. Say B120/B160 and try to flash it through 3 buttons method.. You should get a phone working
I was trying it but installation failed
karov_mm said:
Hello guys...
3 . Can anybody tell me what's wrong with this oeminfo zip? Added to download for you.
Click to expand...
Click to collapse
Your attach oeminfo is for VNS-L21 Dual Sim, and is fine.
That problem with error corrupted firmware is normal after you flash oeminfo...
Something else is going wrong...
You are sure that you put in dload folder on microsdcard update.app from VNS-L21C432B130 stock firmware?
gtdaniel said:
Your attach oeminfo is for VNS-L21 Dual Sim, and is fine.
That problem with error corrupted firmware is normal after you flash oeminfo...
Something else is going wrong...
You are sure that you put in dload folder on microsdcard update.app from VNS-L21C432B130 stock firmware?
Click to expand...
Click to collapse
Yea, but It was l21c432b160 not c130
karov_mm said:
Yea, but It was l21c432b160 not c130
Click to expand...
Click to collapse
That oeminfo i used many time to return from Nougat to MM, but with B130 firmware...
gtdaniel said:
That oeminfo i used many time to return from Nougat to MM, but with B130 firmware...
Click to expand...
Click to collapse
I'm gonna try one more time but I'm on job so it might be in 2 hours
Edit: so it's okay that I flash oeminfo for 130 in 160system?
karov_mm said:
I'm gonna try one more time but I'm on job so it might be in 2 hours
Edit: so it's okay that I flash oeminfo for 130 in 160system?
Click to expand...
Click to collapse
Is ok. Anyway after any oeminfo flash phone become corrupted...
Make sure you have in dload folder update.app from B130.
After flash oeminfo, power off phone and started with 3 keys combination.
gtdaniel said:
Is ok. Anyway after any oeminfo flash phone become corrupted...
Make sure you have in dload folder update.app from B130.
After flash oeminfo, power off phone and started with 3 keys combination.
Click to expand...
Click to collapse
Can you send me link for 160 update.app? I'm in job and it's hard to search anything on backup phone. I will download this update file and try to repair phone on break from job.
EDIT: I MEAN 130 UPDATE.APP FILE, MY BAD
karov_mm said:
Can you send me link for 160 update.app? I'm in job and it's hard to search anything on backup phone. I will download this update file and try to repair phone on break from job.
Click to expand...
Click to collapse
NOT B160 update.app!
B130 is ok!
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v54902/f1/full/update.zip
gtdaniel said:
NOT B160 update.app!
B130 is ok!
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v54902/f1/full/update.zip
Click to expand...
Click to collapse
Sadly installing still not working
karov_mm said:
Sadly installing still not working
Click to expand...
Click to collapse
What is going wrong?
Post some printscreen or pictures...
gtdaniel said:
What is going wrong?
Post some printscreen or pictures...
Click to expand...
Click to collapse
I can't now. I think i used oeminfo for l31. This is user-script file from .zip that i post before.
"ui_print("Flasheando OEMInfo DUAL-SIM para P9Lite...");
ui_print("Realizado por BadWolf");
package_extract_file("oeminfoDUAL.img", "/dev/block/platform/hi_mci.0/by-name/oeminfo");
ui_print("Finalizado! Recuerda flashear ahora la ROM L31");
set_progress(1.000000);"
karov_mm said:
I can't now. I think i used oeminfo for l31. This is user-script file from .zip that i post before.
"ui_print("Flasheando OEMInfo DUAL-SIM para P9Lite...");
ui_print("Realizado por BadWolf");
package_extract_file("oeminfoDUAL.img", "/dev/block/platform/hi_mci.0/by-name/oeminfo");
ui_print("Finalizado! Recuerda flashear ahora la ROM L31");
set_progress(1.000000);"
Click to expand...
Click to collapse
Ok! Try with this oeminfo for VNS-L21 (Single Sim/Dual Sim)
Anyway, conform instructions from this post:
HOW TO DOWNGRADE FROM NOUGAT TO MM
VNS-L31
Look at that thread :
http://www.htcmania.com/showthread.php?t=1261335
VNS-L21 (THANKS TO @Johnny TDN )
1. flash TWRP(thanks to @BadWolfYe )
2. Flash this file
3. Put the MM UPDATE.APP in the DLOAD folder on EXTERNAL SDCARD
4. Install it using the 3 button method (dload method)
5. Factory reset
6. DONE!!
for VNS-L21 which i done 4-5 times for returning from Nougat to MM is one oeminfo which work for VNS-L21 who have in update script instructions for VNS-L31 and flash fine on VNS-L21...
Related
hello
i have i bricked p9lite now i guess
why it happend i was on android 7.0 nougat beta version but bluetooth was not working good etc so i was trying to get 6.0 back well there happend somthing wrong i completed erase my phone for some reason
and get couple errors in twrp when i trying to install any firmware errors are: 7 and 134
i have twrp nougat and fastboot
and phone have no os atm
and have a unlocked bootloader and have code if needed
sombody can help me plz can't figure it out now
mayby thanks arrowbow
First of all...
Restore your TWRP backup to get your OS back to work.
To downgrade from Nougat, you really need the RIGHT files.
So start by telling us which phone you have (L31 or 21?).
if you haveb't a twrp backup you can go to fastboot and flash system.img boot.img cust.img and recovery.img
Yea, but before flash oeminfo via twrp
k i have huawei vns-l31 i don't have any backup so thats the problem i forgot to make it thats kinda dumb
i only have some .zip file no .img files
Flash OEMinfo, then install version B150 (for me, it ONLY worked with B150 no other version) with the three button method.
Copy the update.app into DLOAD of your SD card with mounting storage in TWRP.
Schlengge said:
Flash OEMinfo, then install version B150 (for me, it ONLY worked with B150 no other version) with the three button method.
Copy the update.app into DLOAD of your SD card with mounting storage in TWRP.
Click to expand...
Click to collapse
k wait how i flash oeminfo in it ? in bootloader or twrp and can you give me a link for the correct oeminfo file plz i don't wanna do somthing wrong now
arrowbow said:
k wait how i flash oeminfo in it ? in bootloader or twrp and can you give me a link for the correct oeminfo file plz i don't wanna do somthing wrong now
Click to expand...
Click to collapse
Flashable zip file that can be flashed in TWRP.
Link can be found here in the OP https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932
Look at the rollback section.
arrowbow said:
k wait how i flash oeminfo in it ? in bootloader or twrp and can you give me a link for the correct oeminfo file plz i don't wanna do somthing wrong now
Click to expand...
Click to collapse
trying to find b150 but any site won't let me do you have some mediafire or a site can't find b150
Schlengge said:
Flashable zip file that can be flashed in TWRP.
Link can be found here in the OP https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932
Look at the rollback section.
Click to expand...
Click to collapse
k let me look
or i am retarded or i really can't see the rollback section for oeminfo
arrowbow said:
trying to find b150 but any site won't let me do you have some mediafire or a site can't find b150
Click to expand...
Click to collapse
Nope don't have it I am on Lineage OS now so deleted all my stock related stuff.
Look at the HTC mania thread, the Spanish one. It is linked several times in these Nougat threads. They have a link to a collection of firmwares where there is also B150 for download.
Use a translator to find the link for L31 firmwares.
Schlengge said:
Nope don't have it I am on Lineage OS now so deleted all my stock related stuff.
Look at the HTC mania thread, the Spanish one. It is linked several times in these Nougat threads. They have a link to a collection of firmwares where there is also B150 for download.
Use a translator to find the link for L31 firmwares.
Click to expand...
Click to collapse
k got the b150 firmware update.zip only i really can't find a oeminfo yet only for vns 21 or somthing
nvm i have C432OemInfo-DUALSIM-P9LITE.zip thats the right file right ?
arrowbow said:
nvm i have C432OemInfo-DUALSIM-P9LITE.zip thats the right file right ?
Click to expand...
Click to collapse
Yes.
Schlengge said:
Yes.
Click to expand...
Click to collapse
k so i flash that oeminfo in twrp right ?
arrowbow said:
k so i flash that oeminfo in twrp right ?
Click to expand...
Click to collapse
i did flash that oeminfo zip in twrp i got this
mount -o bind '/data/media' '/sdcard' process ended with ERROR: 134
arrowbow said:
k so i flash that oeminfo in twrp right ?
Click to expand...
Click to collapse
First, put the update.app from B150 into your SD card in the DLOAD folder.
Then flash OEM, then turn off device and turn back on with all three buttons pressed.
Schlengge said:
First, put the update.app from B150 into your SD card in the DLOAD folder.
Then flash OEM, then turn off device and turn back on with all three buttons pressed.
Click to expand...
Click to collapse
k let me try it sec
How can I debrand my phone ? I mean going from C02 to C432 ?
Can anyone point out the steps needed ?
Thanks
bunilla said:
How can I debrand my phone ? I mean going from C02 to C432 ?
Can anyone point out the steps needed ?
Thanks
Click to expand...
Click to collapse
Unlock bootloader + TWRP + root + flash oeminfo of C432 + repair firmware via dload folder.
gtdaniel said:
Unlock bootloader + TWRP + root + flash oeminfo of C432 + repair firmware via dload folder.
Click to expand...
Click to collapse
which option in the toolkit should be pressed to put Oeminfo,upgrade button or individual?
gtdaniel said:
Unlock bootloader + TWRP + root + flash oeminfo of C432 + repair firmware via dload folder.
Click to expand...
Click to collapse
I have L31 and I want to debrand it from C440 to C432. I did some research, but still I have some questions.
1. Unlock bootloader + TWRP + root - I found this https://forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
It's ok right ?
2. Flash oeminfo of C432 and this should be done by SRKTool and oeminfo I found there https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
3. repair firmware via dload folder - Unfortunately I don't know how to do it. In the instructions for p9, it was done also in SRKTools using "Install Recovery 6.0", but there P9Lite is not mentioned, how should I do ?
4. Install new ROM - I should install new ROM for c432, right ? It's using 3 button method ?
And that's all ?
smackedRico said:
I have L31 and I want to debrand it from C440 to C432. I did some research, but still I have some questions.
3. repair firmware via dload folder - Unfortunately I don't know how to do it. In the instructions for p9, it was done also in SRKTools using "Install Recovery 6.0", but there P9Lite is not mentioned, how should I do ?
4. Install new ROM - I should install new ROM for c432, right ? It's using 3 button method ?
And that's all ?
Click to expand...
Click to collapse
Regarding <3. repair firmware via dload folder>, you have to download stock firmware for C432 (B130/131 or B160/161 - depends what oeminfo you flash),
unzip update.app and copied on dload folder on microsdcard. Power off and power on with 3 key combination and repair start...
At the end you have a brand new C432B1XX phone...
gtdaniel said:
Regarding <3. repair firmware via dload folder>, you have to download stock firmware for C432 (B130/131 or B160/161 - depends what oeminfo you flash),
unzip update.app and copied on dload folder on microsdcard. Power off and power on with 3 key combination and repair start...
At the end you have a brand new C432B1XX phone...
Click to expand...
Click to collapse
And the bootloader should be locked, right ?
smackedRico said:
And the bootloader should be locked, right ?
Click to expand...
Click to collapse
Indeed, you lose bootloader unlock, twrp and root (if you have).
If now I have c440B160, and I place oeminfo for c432 do i have to install c432b160 or I can install c432b131, because I only found that version
I installed TWRP and Root, and now I don't know how to change oeminfo, because in srk is only p9,not p9 lite, and I downloaded package .zip and tried to install it by TWRP but it didn't work. How should i do this ?
Ministry of solutions has a full tutorial, I used it and it worked flawlessly
Sent from my HUAWEI VNS-L21 using Tapatalk
Ok, thank. That worked. But now I try to update phone by using firmware finder. It finds me a lot of versions and I downloaded the newest b381 full ota, and it failed, because something was wrong in that package
What u debranded to?
Sent from my HUAWEI VNS-L21 using Tapatalk
Now i have c432b160, at least it sey so. I used the ministry of solutions oeminfo and rom.
Now I use firmware finder to find new versions, and it finds me a lot of them so I send b381 full ota to updater, it downloads, and then reboots, but it find verification error. How to fix it, i want to update to emui 5.0. Now I have C432B160
smackedRico said:
I have L31 and I want to debrand it from C440 to C432. I did some research, but still I have some questions.
1. Unlock bootloader + TWRP + root - I found this https://forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
It's ok right ?
2. Flash oeminfo of C432 and this should be done by SRKTool and oeminfo I found there https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
3. repair firmware via dload folder - Unfortunately I don't know how to do it. In the instructions for p9, it was done also in SRKTools using "Install Recovery 6.0", but there P9Lite is not mentioned, how should I do ?
4. Install new ROM - I should install new ROM for c432, right ? It's using 3 button method ?
And that's all ?
Click to expand...
Click to collapse
Do not debrand to c432 in srktool hope you didnt do it in srktool the c432 i only for normal P9 i once misd flashed it and i got vns-c432b160 i didnt have l21 or 31 nor anything and it was a pain in the a s s to fix
Hi Guys.
Maybe somebody can help here:
I am on B161 and get the OTA Update for B371 - but only the 2.5GB version! And with this update, bluetooth and many more things don't work.
What can I do to Upgrade to nougat? Which Version should I use? How to upgrade correctly?
I don't get the full B371 Upgrade option in the system. And when i Install the B371 Image from Firmware Finder (VNS-L31C432B371 FullOTA-MF-PV) its not working either...
PLEASE help, Nougat has a much better Ram Usage und battery life then MM on my P9 Lite 2GB Variant.....
Thanks!
Better wait.
Nougat has battery drain.
Johnny TDN said:
Better wait.
Nougat has battery drain.
Click to expand...
Click to collapse
But the thing is -> i have the Update available to B371 but it is only the 2,5gb version and i'm thinking will this update be replaced with another one or am i stuck on this update the system wants to give me...
If your phone is stock and update is available via System Updater, go for it!
You have nothing to lose...
gtdaniel said:
If your phone is stock and update is available via System Updater, go for it!
You have nothing to lose...
Click to expand...
Click to collapse
I was on B371 before but had the issue with bluetooth not working etc. Then i did the rollback package and afterwards went back to B161 - so i suppose its not really stock?
I'm just thinking - now i am on B161 and B371 Update is visible for me - but only the 2.5GB variant - and i don't want to update and have the same issues and again do the rollback and loose all my data?
Also i don't really now what it means exactly to be on "Stock" rom - because i think B161 is the actual Stock rom for now?
EDIT: Also i See i have the Firmware VNS-L31 but my Model is actually VNS-L21 so thats weird too.
e-coder said:
I was on B371 before but had the issue with bluetooth not working etc. Then i did the rollback package and afterwards went back to B161 - so i suppose its not really stock?
I'm just thinking - now i am on B161 and B371 Update is visible for me - but only the 2.5GB variant - and i don't want to update and have the same issues and again do the rollback and loose all my data?
Also i don't really now what it means exactly to be on "Stock" rom - because i think B161 is the actual Stock rom for now?
EDIT: Also i See i have the Firmware VNS-L31 but my Model is actually VNS-L21 so thats weird too.
Click to expand...
Click to collapse
Stock phone means unaltered phone (firmware official, bootloader lock, stock recovery etc)
If you have VNS-L31 firmware on VNS-L21 phone is not ok... So your phone is altered...
gtdaniel said:
Stock phone means unaltered phone (firmware official, bootloader lock, stock recovery etc)
If you have VNS-L31 firmware on VNS-L21 phone is not ok... So your phone is altered...
Click to expand...
Click to collapse
Ok Thanks!
I tried the update now and as supposed it is the update with the nrdm900 test-key
what would be best to do? do the rollback to vns-l21c432b161 and wait? i think this firmware version would be stock?
e-coder said:
Ok Thanks!
I tried the update now and as supposed it is the update with the nrdm900 test-key
what would be best to do? do the rollback to vns-l21c432b161 and wait? i think this firmware version would be stock?
Click to expand...
Click to collapse
First of all you have to bring your phone on stock condition (VNS-L21C432B131).
After that you have to apply a B161 official update.
And from there, with Firmware Finder you go to B371.
gtdaniel said:
First of all you have to bring your phone on stock condition (VNS-L21C432B131).
After that you have to apply a B161 official update.
And from there, with Firmware Finder you go to B371.
Click to expand...
Click to collapse
Ok i Will update to the rollback package. After that i will update to B131. Do you have a link for that?
EDIT: Found the Link here http://firmware.smartphonewp.com/do...irmware-version-b131-android-6-0-marshmallow/
And when i am on B131 can I Update via system Updater to b161 ?
e-coder said:
Ok i Will update to the rollback package. After that i will update to B131. Do you have a link for that?
EDIT: Found the Link here http://firmware.smartphonewp.com/do...irmware-version-b131-android-6-0-marshmallow/
And when i am on B131 can I Update via system Updater to b161 ?
Click to expand...
Click to collapse
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v54896/f1/full/update.zip
gtdaniel said:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v54896/f1/full/update.zip
Click to expand...
Click to collapse
Thanks man! you're great!
And when B131 is installed will i get B161 via system update?
e-coder said:
Thanks man! you're great!
And when B131 is installed will i get B161 via system update?
Click to expand...
Click to collapse
Yes, that it should be if everything works fine.
gtdaniel said:
Yes, that it should be if everything works fine.
Click to expand...
Click to collapse
lol ok i did the rollback with the rollback package which obviously only changes the oeminfo to VNS-L31C900B300 (as mentioned in another post to rollback from Nougat to MM)
Now when I try to Install the B131 Package with dload method it says the firmware doesnt fit. The build is not correct for this device
EDIT: i try now to install it via Firmware Finder, lets see if theres better luck with that - Or should I ? The update has only 1,5GB - that confuses me Allthough i selected the FULL OTA
e-coder said:
lol ok i did the rollback with the rollback package which obviously only changes the oeminfo to VNS-L31C900B300 (as mentioned in another post to rollback from Nougat to MM)
Now when I try to Install the B131 Package with dload method it says the firmware doesnt fit. The build is not correct for this device
EDIT: i try now to install it via Firmware Finder, lets see if theres better luck with that - Or should I ? The update has only 1,5GB - that confuses me Allthough i selected the FULL OTA
Click to expand...
Click to collapse
Man, you are in twilight zone if your VNS-L21 phone have VNS-L31 firmware...
I said earlier: First of all you have to bring your phone on stock condition (VNS-L21C432B131).
That you have to do first!
gtdaniel said:
Man, you are in twilight zone if your VNS-L21 phone have VNS-L31 firmware...
I said earlier: First of all you have to bring your phone on stock condition (VNS-L21C432B131).
That you have to do first!
Click to expand...
Click to collapse
Man I tried Tried to do the upgrade via dload method - doesnt work. I tried to install B131 via Firmware Finder - didnt work he cant do it - while verifying the update package switches a few times from 0 to 1 % and after some times he says the package is corrupt.
Can I go just higher than B371 to get everything working again?
Or flash back to B131 with some TWRP or something like that?
Or maybe try to flash the B371 with firmware finder again? That version where it says FullOTA-MF-PV (whatever PV means)
If i was you, i do following:
- first, i make sure if my phone is VNS-L21 (very important!)
- put in dload folder on microsdcard, update.app from B161 firmware: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66051/f1/full/update.zip
- flash via twrp oeminfo from this link: https://mega.nz/#!Egl01ZpJ!g1K9xV2yZ4oyoBKxFMOWgghTTUzqLUBoBeXkUboCi-A
- start phone with 3 keys combination and let firmware to repair itself.
gtdaniel said:
If i was you, i do following:
- first, i make sure if my phone is VNS-L21 (very important!)
- put in dload folder on microsdcard, update.app from B161 firmware: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66051/f1/full/update.zip
- flash via twrp oeminfo from this link: https://mega.nz/#!Egl01ZpJ!g1K9xV2yZ4oyoBKxFMOWgghTTUzqLUBoBeXkUboCi-A
- start phone with 3 keys combination and let firmware to repair itself.
Click to expand...
Click to collapse
thats what i try - to get back to vns-l21 but no image worked so far .... i will try to update to vns-l21c432b160 firmware with firmware finder maybe that'll work...
what is in this oeminfo file and is there another way to flash it without twrp?
e-coder said:
thats what i try - to get back to vns-l21 but no image worked so far .... i will try to update to vns-l21c432b160 firmware with firmware finder maybe that'll work...
what is in this oeminfo file and is there another way to flash it without twrp?
Click to expand...
Click to collapse
Nope, oeminfo must be flashed via twrp or via some tools (for that is need root).
In that oeminfo file is stock oeminfo for installing VNS-L21C432B161 firmware.
gtdaniel said:
Nope, oeminfo must be flashed via twrp or via some tools (for that is need root).
In that oeminfo file is stock oeminfo for installing VNS-L21C432B161 firmware.
Click to expand...
Click to collapse
Hm okay, so the first problem needs to be solved first - i am in VNS-L31C900B300 now - how can i get back to SOME VNS-L21 image....? as said i tried to dload the B131 Image you gave me the link for but it didnt work to update.
Right now i am trying to install VNS-L21C432B371 FullOTA-MF-PV from FF.... EDIT: Ok that does not work either
e-coder said:
Hm okay, so the first problem needs to be solved first - i am in VNS-L31C900B300 now - how can i get back to SOME VNS-L21 image....? as said i tried to dload the B131 Image you gave me the link for but it didnt work to update.
Right now i am trying to install VNS-L21C432B371 FullOTA-MF-PV from FF....
Click to expand...
Click to collapse
Ok... Good luck, but from my experience i think you can not do something right until you flash oeminfo right for your device...
hey xda.
i got unlocked bootloader and twrp installed.
i formatet data via twrp now i cant flash a rom?
(unable to write data) or something
I cant go to the Dload function
if im now in twrp my phone keeps restarting
i have adb installed
i really need help, i can do it my self or u can help via teamviewer i ****t brand new phone
and when im wipe
Failed to mount cust
failed to mount daata
failed to mount system
I have to know your system version that you have cancelled and the recovery version, because Nougat is different from MM
What phone do you have? (Back of the phone it tells you what VNS is. Say what VNS is.)
Ask somebody to send you a backup of their rom.
Jinclaudio said:
I have to know your system version that you have cancelled and the recovery version, because Nougat is different from MM
Click to expand...
Click to collapse
I rolled back from nogat to mm my phone is L31, the version i rolled to was full ota b161 i think or 161
Johnny TDN said:
What phone do you have? (Back of the phone it tells you what VNS is. Say what VNS is.)
Ask somebody to send you a backup of their rom.
Click to expand...
Click to collapse
p9 lite vns FUH7N17311000495 (backup folder) :S
where do i find the VNS number
You can try to recovery the stock ROM with dload method.
1. May sure that you've flashed the OEM info. It will lock your bootloader.
2. Put update.app in dload. The version can be b161.
3 update.
Reboot
---------- Post added at 04:30 PM ---------- Previous post was at 04:27 PM ----------
https://drive.google.com/file/d/0B70jqOUVoiIDbjhPdnZxaEFxUEU/view?usp=drivesdk
Here is oeminfo that I used, flahsable with twrp, if you need
mhmortensen said:
p9 lite vns fuh7n17311000495 (backup folder) :s
where do i find the vns number
Click to expand...
Click to collapse
on the back of the crap phone!
Johnny TDN said:
on the back of the crap phone!
Click to expand...
Click to collapse
I know its L31c432.
But the question is.
I will dload now, Can i dload to the Newest firmware (nogat orginal). I just flash the recovery from the update app
Mhmortensen said:
I know its L31c432.
But the question is.
I will dload now, Can i dload to the Newest firmware (nogat orginal). I just flash the recovery from the update app
Click to expand...
Click to collapse
Get the 6.0 version.
Nougat is a bit unstable (battery drain...)
Hi,
I got a huawei P10 lite locked in demo mode (coming from a commercial center demo product)
I unlocked OEM, open bootloader, installed TWRP (hope mine is the last), and I forgot to backup demo rom before trying to install a stock.
At this time, I can :
- enter TWRP
- enter Huawei recovery (but does update anything in wifi)
- enter bootloader to use fastboot.
My model is a :
WAS-LX1A on C652B101
I downloaded stock firmware posted 4 days ago, (http://bit.ly/2mcaPDA) and choose France Bytel (WAS-LX1AC530B171).
I put the update.app in a dload folder in my microSD card. I tried to update with vol+ vol- power.
I got a failed error
I download too WAS-LX1AC530B170 and got the same problem. I supposed it was because it wasn't the same country code (mine seems to be 652 right ?)
Finaly I found a supposed compatible version on (http://bit.ly/2hqbOOW) named : Full Firmware-mf WAS-LX1AC652B130 and a second one named Ota Update-mf WAS-LX1AC652B130.
I extracted update.app and put it in a dload folder and did not succed in upgrading.
My question is : Have I forgotten something ? Or is this demo model locked to be upgraded ?
Finaly, is there a backuped rom usable with TWRP to be restored ? (like I saw with the P8 lite 2017)
Thanks in advance, for your help, and my appologies for my very poor english writings
Man i recommend backup only oeminfo, copy c432 and restore, then with servicerom b182(ds) or b183(ss) copy update.app + all was folders inside dload to dload folder inside sdcard
Don' waste your time with vendors+huawei
foliaje said:
Man i recommend backup only oeminfo, copy c432 and restore, then with servicerom b182(ds) or b183(ss) copy update.app + all was folders inside dload to dload folder inside sdcard
Don' waste your time with vendors+huawei
Click to expand...
Click to collapse
Thanks for your quick answer.
Can you give me precisions plz ?
- backup only oeminfo ? You means backup with my twrp ?
- copy C432 and restore, you means download a stock c432 and restore it with twrp ?
- 3rd part is ok
lebeneur said:
Thanks for your quick answer.
Can you give me precisions plz ?
- backup only oeminfo ? You means backup with my twrp ?
- copy C432 and restore, you means download a stock c432 and restore it with twrp ?
- 3rd part is ok
Click to expand...
Click to collapse
Yeah you make a backup with twrp in your sdcard(copy to safe place), then copy/replace c432 and press restore.
Ok fine !
Have you got a link for the C432 wich could be copied or restor with TWRP ?
thanks
Here you can download dual or single,
if you can acess to settings<about phone therw you have the imei(s), or too looking in the box https://forum.xda-developers.com/p10-lite/how-to/huawei-p10-lite-oeminfo-collection-t3670325
Ok !
Just to be sure, there is no problem to use a servicerom LX1 to repair mine wich is a LX1A ?
lebeneur said:
Ok !
Just to be sure, there is no problem to use a servicerom LX1 to repair mine wich is a LX1A ?
Click to expand...
Click to collapse
we'll never try lx1 on lx1a device i dont want brick my device, just copy to dload folder in sdcard update.app and all was folders
LX1A
X means some number such as 0 or 2.
L21 dual SIM.
L01 single SIM
A is mark for 4gb model.
Great ! All seems clear. I will try this evening and will come back to informe you about the results.
Is the old oeminfo usefull after a successful restoration or can I keep the one I used in your sample ?
lebeneur said:
Great ! All seems clear. I will try this evening and will come back to informe you about the results.
Is the old oeminfo usefull after a successful restoration or can I keep the one I used in your sample ?
Click to expand...
Click to collapse
in post #4 i recommend copy to safe place before do anything, anyway usefull is but yo'll need a full backup, i dont know restore the mobile with ff
c432 is free nothing of vendors such as Vodafone, i dont know c652 where is so take care
All worked perfectly as you said ! Thank you very mutch sir !