I tried rooting my s7 edge sf-g935f (European device) trying this method, https://forum.xda-developers.com/s7-edge/how-to/samsung-galaxy-s7-edge-root-exynos-t3646942
I got a failed verification and went back into twrp and accidentally wiped my whole phone including OS :crying::crying:
I still have access to downloader and twrp i have downloaded firmware but cannot get to install OS.
can someone please please help me or point me in the right direction
Greatly appreciated
Thanks
Alan
*** edit***
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G935F
Current Binary: Custom
System Status: Official
FRP LOCK: OFF
Secure Download: Enabled
Warranty Void: 1 (0x030c)
RP SWREV: B:2 K:0 S:0
When odin runs I get SW REV. Check Fail. Device 2, Binary: 1
Please anyone, I managed to install firmware but now my imei etc is unknown.
If someone can even point in right direction
Lads and girls, I'm begging for some help
Please someone must have some idea on how to help me out.
Please.
bupbups said:
Please someone must have some idea on how to help me out.
Please.
Click to expand...
Click to collapse
I think you should download official firmware and flash it using Odin ( i am no expert nor i have this device)this is just what i used to do with my older Samsung mobiles and i dont have any new Samsung device. i am going to buy s7 edge so i was here. hope this helps
nicholes said:
I think you should download official firmware and flash it using Odin ( i am no expert nor i have this device)this is just what i used to do with my older Samsung mobiles and i dont have any new Samsung device. i am going to buy s7 edge so i was here. hope this helps
Click to expand...
Click to collapse
Thanks Nicholes
Any idea where I could even get official firmware
Really appreciate your help
bupbups said:
Thanks Nicholes
Any idea where I could even get official firmware
Really appreciate your help
Click to expand...
Click to collapse
Here you go dear
Related
Hello i can't unbrick my s4.
I try to install cwm , but it's failed and now I can't install anything!
when i start my phone a message say me : "firmware upgrade encountered an issue. please select recovery mode in kies & try again".
I try this:
- reinstall , renew the firmware by kies.(on windows 7 and 8)
- install by odin a lot of stock rom (the latest two is: TIM-I9505XXUGNF1-20140708100448.zip and I9505XXUFNAD_I9505OXXFNA2_I9505XXUFNAD_OXX.zip)
but the odin mode say me always write (auth) fail!.
In fact on my screen there is this text:
Code:
currenty binary: custom
system status: Official
knox kernel lock: 0x0
knox warrany void: 0x0
csb-config.lsb: 0x30
write protection: Enable
eMMC BURST MODE enabled
what can I do ?please help me ... thanks in advance and sorry for my bad english ... I'm italian!
hackmejava said:
Hello i can't unbrick my s4.
I try to install cwm , but it's failed and now I can't install anything!
when i start my phone a message say me : "firmware upgrade encountered an issue. please select recovery mode in kies & try again".
I try this:
- reinstall , renew the firmware by kies.(on windows 7 and 8)
- install by odin a lot of stock rom (the latest two is: TIM-I9505XXUGNF1-20140708100448.zip and I9505XXUFNAD_I9505OXXFNA2_I9505XXUFNAD_OXX.zip)
but the odin mode say me always write (auth) fail!.
In fact on my screen there is this text:
Code:
currenty binary: custom
system status: Official
knox kernel lock: 0x0
knox warrany void: 0x0
csb-config.lsb: 0x30
write protection: Enable
eMMC BURST MODE enabled
what can I do ?please help me ... thanks in advance and sorry for my bad english ... I'm italian!
Click to expand...
Click to collapse
Hi,
Check this thread :
http://forum.xda-developers.com/showthread.php?t=2265477
MAX 404 said:
Hi,
Check this thread :
http://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
thanks you for the answer, but when I flash the firmware with odin (and fail),
the s4 in download mode is written on the phone
Code:
SW REV. CHECK FAIL : fused 4, Binary : 3
the latest firmware i try to flash is :
I9505XXUFNA1_I9505OXAFNA1_I9505XXUFNA1_HOME.tar
Please Help Me!:crying:
hackmejava said:
thanks you for the answer, but when I flash the firmware with odin (and fail),
the s4 in download mode is written on the phone
Code:
SW REV. CHECK FAIL : fused 4, Binary : 3
the latest firmware i try to flash is :
I9505XXUFNA1_I9505OXAFNA1_I9505XXUFNA1_HOME.tar
Please Help Me!:crying:
Click to expand...
Click to collapse
Mate ,
That is an old leaked ( jan 2014) software....why you want to install it? Anyway what you have installed now , maybe the bootloader installed now in your phone is newer that the one your trying to install , if so it will not let you
Ok i don t know why i m trying to install this firmware . I m trying to unbrick my phone can you link me the right firmware? Please thanks you in advance!
hackmejava said:
Ok i don t know why i m trying to install this firmware . I m trying to unbrick my phone can you link me the right firmware? Please thanks you in advance!
Click to expand...
Click to collapse
Hi mate ,
First of all read this thread:
http://forum.xda-developers.com/showthread.php?t=2265477
There are very useful tips to solve softbrick issues , there it also gives you links to firmware files or check here
http://www.sammobile.com/firmwares/
MAX 404 said:
Hi mate ,
First of read this thread:
http://forum.xda-developers.com/showthread.php?t=2265477
There are very useful tips to solve softbrick issues , there it also gives you links to firmware files or check here
http://www.sammobile.com/firmwares/
Click to expand...
Click to collapse
thanks you for the answer but in this list of firmwares there isn't a italian firmware! what can I do?
hackmejava said:
thanks you for the answer but in this list of firmwares there isn't a italian firmware! what can I do?
Click to expand...
Click to collapse
Check the other link Sammobile , there they have all firmware
Thanks you ! My phone working now! The problem was Windows 8.... on windows 7 odin flash fine![emoji3]
Hello so here is the problem, I restarted my phone last night then i got a error saying custom binary blocked by frp lock. So i followed steps and waited hours for firmware to download to get nothing but fails on Odin. I am now getting SW REV. CHECK FAIL DEVICE: 2 BINARY: 1
I have downloaded the very last firmware from this site and it has not worked any suggestions would be very helpful.
the website is: sammobile SM-G928P the very last one the is 5.1.1
I could use any help please and thank you.
DETAILS: SM-G928P (Samsung Galaxy S6 Edge +)
Current Binary: Custom
System Status: Custom
FRP Lock: On
Phone cannot be used at all but the Downloading screen ODIN MODE and the start up screen with the custom binary blocked frp lock
try update your phone with lastest verion 6.0.1 G928PVPS2BPD1
KingGoldenWax said:
Hello so here is the problem, I restarted my phone last night then i got a error saying custom binary blocked by frp lock. So i followed steps and waited hours for firmware to download to get nothing but fails on Odin. I am now getting SW REV. CHECK FAIL DEVICE: 2 BINARY: 1
I have downloaded the very last firmware from this site and it has not worked any suggestions would be very helpful.
the website is: sammobile SM-G928P the very last one the is 5.1.1
I could use any help please and thank you.
DETAILS: SM-G928P (Samsung Galaxy S6 Edge +)
Current Binary: Custom
System Status: Custom
FRP Lock: On
Phone cannot be used at all but the Downloading screen ODIN MODE and the start up screen with the custom binary blocked frp lock
Click to expand...
Click to collapse
blocked frp loc k
you need flash stock rom will be fix this problem
good luck
thanhman18 said:
try update your phone with lastest verion 6.0.1 G928PVPS2BPD1
Click to expand...
Click to collapse
I am downloading the one you listed 6.0.1 G928PVPS2BPD1 It will be done downloading in 2 hours. Then I will place it in AP spot then click start and hope the it works. Will keep you updated thanks for the help.
yaniyu said:
blocked frp loc k
you need flash stock rom will be fix this problem
good luck
Click to expand...
Click to collapse
I am downloading 6.0.1 G928PVPS2BPD1 right now. What stock rom are you talking about the 5.1.1 firmware? I appreciate the help, just do not know what stock rom to flash I will search up G928PVPS2BPD1 stock rom or S6 edge + stock rom right now.
thanhman18 said:
try update your phone with lastest verion 6.0.1 G928PVPS2BPD1
Click to expand...
Click to collapse
It worked thank you so much.
kinggoldenwax said:
i am downloading 6.0.1 g928pvps2bpd1 right now. What stock rom are you talking about the 5.1.1 firmware? I appreciate the help, just do not know what stock rom to flash i will search up g928pvps2bpd1 stock rom or s6 edge + stock rom right now.
Click to expand...
Click to collapse
g928pvps2bpd1
Hello guys,
I've installed a ROM 6.0.1 with some N6 items, and haven't pay attention, but this ROM was for N910C.
Then, I'm trying to change it back, installing some N910H rom, trying to do the reverse thing, but it was not successful.
Somebody know hot to get my N910H back again??
xicko said:
Hello guys,
I've installed a ROM 6.0.1 with some N6 items, and haven't pay attention, but this ROM was for N910C.
Then, I'm trying to change it back, installing some N910H rom, trying to do the reverse thing, but it was not successful.
Somebody know hot to get my N910H back again??
Click to expand...
Click to collapse
Anybody??
xicko said:
Anybody??
Click to expand...
Click to collapse
Downlod samsung usb drivers & odin tool in your windows pc & Flash N910H official stock firmware
http://www.sammobile.com/firmwares/database/SM-N910H/
After flash firmware in odin make sure you do wipe cache & factory reset from recovery your model will be reverse back to N910H again.
Trex888 said:
Downlod samsung usb drivers & odin tool in your windows pc & Flash N910H official stock firmware
http://www.sammobile.com/firmwares/database/SM-N910H/
After flash firmware in odin make sure you do wipe cache & factory reset from recovery your model will be reverse back to N910H again.
Click to expand...
Click to collapse
Hi Trex888, thanks for your answer,
I already tried this solution, but I cant flash stock via Odin. I assume the phone is checking if the stock rom is n910c, and it gives me an error.
Do you want me to post the error?
Thanks!
xicko said:
Hi Trex888, thanks for your answer,
I already tried this solution, but I cant flash stock via Odin. I assume the phone is checking if the stock rom is n910c, and it gives me an error.
Do you want me to post the error?
Thanks!
Click to expand...
Click to collapse
Go to download mode and Check what exactly your model number is on top of screen and tell me
trex888 said:
go to download mode and check what exactly your model number is on top of screen and tell me
Click to expand...
Click to collapse
odin mode
product name: Sm-n910c
current binary: Custom
system status: Custom
reactivation lock: Off
secure download: Enabled
knox warranty void: 1
ap swrev: 2
xicko said:
odin mode
product name: Sm-n910c
current binary: Custom
system status: Custom
reactivation lock: Off
secure download: Enabled
knox warranty void: 1
ap swrev: 2
Click to expand...
Click to collapse
did you try to flash N910C occicial firmware ? try if it works then your motherboard is orignally N910C AND YOU CANNOT CONVERT TO N910H no matter which custom rom you flash it cannot change moherboard model
Trex888 said:
did you try to flash N910C occicial firmware ? try if it works then your motherboard is orignally N910C AND YOU CANNOT CONVERT TO N910H no matter which custom rom you flash it cannot change moherboard model
Click to expand...
Click to collapse
Man, I'm laughting a lot!!! I've made a great confusion between my last mobile (g900h) and this one.
I'm sorry. Thanks for your help!!!
Hello Guys
I have Flashed a ROM and i trying to go back to my old Rom but it still Unpossible
I trying to Flash a Stock Rom
Handy Model J500H
Its Possible to Flash a ROM without the BL but if i start my Phone it will have green flickering on the Screen sorry for my Broke english Can anybody help me?
ODIN MODE
PRODUCT NAME : SW-J500H
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FRP LOCK: OFF
WARRANTY VOID: 0x1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1,T1,H1,R1,A2, P1
SW REV CHECK FAIL: (aboot) Fused 2 Binary 1
Hassan313 said:
Hello Guys
I have Flashed a ROM and i trying to go back to my old Rom but it still Unpossible
I trying to Flash a Stock Rom
Handy Model J500H
Its Possible to Flash a ROM without the BL but if i start my Phone it will have green flickering on the Screen sorry for my Broke english Can anybody help me?
ODIN MODE
PRODUCT NAME : SW-J500H
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FRP LOCK: OFF
WARRANTY VOID: 0x1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1,T1,H1,R1,A2, P1
SW REV CHECK FAIL: (aboot) Fused 2 Binary 1
Click to expand...
Click to collapse
You are trying to downgrade from Marshmallow 6.0.1 to Lollipop 5.1.1? If yes, then check this: http://forum.xda-developers.com/galaxy-j5/how-to/warning-flash-marshmallow-updates-t3500396 ...
Thanks for the speedfull reply i try to Flash this Rom AP_J500HXXU1AOFB_CL672792_QB5435108_REV00_user_low_ship_MULTI_CERT.tar
what for a ROM can i use?
#Henkate said:
You are trying to downgrade from Marshmallow 6.0.1 to Lollipop 5.1.1? If yes, then check this: http://forum.xda-developers.com/galaxy-j5/how-to/warning-flash-marshmallow-updates-t3500396 ...
Click to expand...
Click to collapse
Hassan313 said:
Thanks for the speedfull reply i try to Flash this Rom AP_J500HXXU1AOFB_CL672792_QB5435108_REV00_user_low_ship_MULTI_CERT.tar
what for a ROM can i use?
Click to expand...
Click to collapse
I'm sorry, but i didn't understand you.
You are getting "about fused" error when you are trying to downgrade from 6.0.1 to 5.1.1 ?
AP_J500HXXU1AOFB_CL672792_QB5435108_REV00_user_low_ship_MULTI_CERT.tarActually i have this Rom on my Handy and this is Android 6.0.1 but if i Flash this Rom i got a Display like this http://www.pic-upload.de/view-32287105/20161213_123128.jpg.html
What for a Rom i can Flash now for my Smartphone if i try a 5.1 Rom i will got the Error and if i Flash a 6.0.1 Rom i got a Screen like the Picture and allways if i try to Flash with Odin a BL i got this Error
http://www.pic-upload.de/view-32287105/20161213_123128.jpg.html
No Body with an Idea?
Hassan313 said:
No Body with an Idea?
Click to expand...
Click to collapse
Hey worry not. Got the same problem when i was trying to upgrade to 6.0.1 from 5.1.1 j500f. I was using smartcare(hehe not sure) what i did was i flashed my stock rom 5.1.1 through odin then it booted.i went to recovery did a factory reset and then went to advanced wiped dalvik cache.
Sent from my SM-J500F using Tapatalk
I downloaded this from sammobile.com/firmwares/download/114459/J500HXXU2BPK4_J500HODD2BPK3_BNG/ for the j500h model its a Bangladesch Version and it Works Perfectly in Germany the rom is without the German Language for the Gernan language i downloaded from the Playstore the Language Enabler
Hi, I have j510fn and I was a rom tester,
I have a problem since I flashed
J510FNXXU2APK6_J510FNODD2APK2_J510FNXXU2APK2_HOME.tar.md5
to test light stock rom v3 from Kingraheel
what happens is that NOW I can't flash any other firmware by odin... when I click START it says FAIL and in my device there is this text in red
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
I just want to flash my OFFICIAL firmware
J510FNXXU1APG1_J510FNPHE1APG1_J510FNXWU1APFC_HOME.tar.md5
but I can't... only APK6 firmware works on odin... any other firmware works.... can you help me?
I don't have any NANDROID backup of previous versions... only of my actual firmware... APK6
My computer does not detect my device... I have the drivers installed, and I tried on all the USB ports... it charges but not open files.... PLEASE HELP
TheWalkingSans said:
Hi, I have j510fn and I was a rom tester,
I have a problem since I flashed
J510FNXXU2APK6_J510FNODD2APK2_J510FNXXU2APK2_HOME.tar.md5
to test light stock rom v3 from Kingraheel
what happens is that NOW I can't flash any other firmware by odin... when I click START it says FAIL and in my device there is this text in red
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
I just want to flash my OFFICIAL firmware
J510FNXXU1APG1_J510FNPHE1APG1_J510FNXWU1APFC_HOME.tar.md5
but I can't... only APK6 firmware works on odin... any other firmware works.... can you help me?
I don't have any NANDROID backup of previous versions... only of my actual firmware... APK6
My computer does not detect my device... I have the drivers installed, and I tried on all the USB ports... it charges but not open files.... PLEASE HELP
Click to expand...
Click to collapse
No need to post twice.
I heard that you cannot downgrade android due to not allowed downgrade of bootloader (aboot.mbn). So stupid dude.
Hello i have the same problem. But until now i cannot downgrade to 5.1.1 via original firmware but i can install cm 12.1 and others. Via editing the kernel of said rom make it the same with the 6.0.1 bootloader.
---------------------------------------
SOLVED, SAME PROBLEM? CONTACT ME
Sent from my SM-J510FN using XDA Labs
TheWalkingSans said:
---------------------------------------
SOLVED, SAME PROBLEM? CONTACT ME
Sent from my SM-J510FN using XDA Labs
Click to expand...
Click to collapse
Why not writing the solution here or in the warning thread?
People could see it without contacting you, without any delay.
Its a little bit long, but I will post it ASAP
Sent from my SM-J510FN using XDA Labs
---------- Post added at 09:14 PM ---------- Previous post was at 08:51 PM ----------
Here is HOW I SOLVED IT:
This error happens when you before have updated from "U1" to "U2" and then you try to flash a firmware with "U1" (UX appears in the firmware "name")
So, the simple solution is to flash the stock firmware with the same "UX" that you had before your device gor bricked.
In my case, testing KingRaheel's ROMS I flashed an Indian firmware (...U2APK6...) at this moment I didn't know I ****ed up. But don't worry, I simply had updated the "U" and how I didn't know it, I tried to flash lots and lots of firmwares with "U1" without knowing what was happening. After long nights, I tried to flash my last firmware from SPAIN (PHE) with "U2" and it worked.
I hope I helped you. I used SM-J510FN (J5 2016)
If you have another device, try the same but with your current model, any questions, ask by twitter/dm
Sent from my SM-J510FN using XDA Labs
Can someone help me fix this error when I'm trying to rooting with the file from ENG-Root-USA.zip(I use the S7edge_Qualcomm.tar from that zip) through Odin 3 v3.14.1 to my Samsung galaxy S7 edge SM-G935T please?
My phone info in Download mode:
PRODUCT NAME: SM-G935T
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
FRP LOCK: OFF
WARANTY VOID: 0x0
QUALCOMM SECURE BOOT: ENABLE
AP SWREV: B11(2, 1, 1, 1, 1) K11 S11
SECURE DOWNLOAD: ENABLE
My phone error: SW REV CHECK Fail : [boot]Fused 11> Binary 1
It quite literally says it.
Binary 11 is newer than binary 1.
Samsung are... Difficult when it comes to downgrading firmwares/basebands
Peterepeat87 said:
It quite literally says it.
Binary 11 is newer than binary 1.
Samsung are... Difficult when it comes to downgrading firmwares/basebands
Click to expand...
Click to collapse
So btw do you have the root file for T mobile samsung galaxy S7 edge because i've tried to search the file on the internet&Youtube and then each link/file i found has already been deleted and yea, now i don't know where should i find the file to root that phone
TheBlueSkull said:
So btw do you have the root file for T mobile samsung galaxy S7 edge because i've tried to search the file on the internet&Youtube and then each link/file i found has already been deleted and yea, now i don't know where should i find the file to root that phone
Click to expand...
Click to collapse
Please dude, there's an info post when you join up with a video about asking n00b questions without searching for yourself first.
Manufacturers > Samsung > T-Moblie S7 Edge page will help you in future.
This should get you going
[2022 Root For S7/S7Edge Oreo Rev4_To_Rev10/A_Odin Flashable Or ADB Method] Plus [Limited Root Method Rev11/B _Using Combo_Firmware]
Oreo Root For The S7/S7E (Will work on Rev4-Rev10/A Bootloader) Adb Install A big thanks goes out to @klabit87 he is 99 percent the reason we have root! Also @stang5litre and stang5litre test group. Prefered Root Method Oreo Only Using Odin...
forum.xda-developers.com
Also be careful with other sites with Odin downloads, some are dodgy. Find one on here. You shouldn't need one as new as 3.14 for an S7, although in the linked thread they have instructions for both odin and adb.
I recommend reading through the whole thread first. It's great to learn from the mistakes others have made so you don't have to make them yourself