Database Users

G900A Stuck on samsung logo then black screen D:

Hello everyone, I have a SM-G900A (Samsung Galaxy S5 ATT Model) Ok so it had 4.4.4 version of android on it. I wanted to put 4.4.2 on it so I could use towel root to root it. So I opened up Odin got the stock firmware from sammobile and tried flashing it, gave me a revision check error, so after doing some research downloaded the stock from here and put it in odin. Ok so from then I added the ap, csc, and cp. Odin looks like its installing right. So now when the phone starts it looks like its doing an update. So after that finishes it starts the samsung logo but freezes and goes to a black screen with the blue notification led pulsing, any ideas? I've tried looking stuff up and still no avail D:

coreyjhowe said:
Hello everyone, I have a SM-G900A (Samsung Galaxy S5 ATT Model) Ok so it had 4.4.4 version of android on it. I wanted to put 4.4.2 on it so I could use towel root to root it. So I opened up Odin got the stock firmware from sammobile and tried flashing it, gave me a revision check error, so after doing some research downloaded the stock from here and put it in odin. Ok so from then I added the ap, csc, and cp. Odin looks like its installing right. So now when the phone starts it looks like its doing an update. So after that finishes it starts the samsung logo but freezes and goes to a black screen with the blue notification led pulsing, any ideas? I've tried looking stuff up and still no avail D:
Click to expand...
Click to collapse
I have the exact same issue from trying to downgrade the firmware to 4.4.2 and my screen is blank with the blue LED light on. I've flashed at least a dozen times and reset factory settings and wiped cache partition with no improvement. If anybody can provide a solution, it would be much appreciated!

waqas1988 said:
I have the exact same issue from trying to downgrade the firmware to 4.4.2 and my screen is blank with the blue LED light on. I've flashed at least a dozen times and reset factory settings and wiped cache partition with no improvement. If anybody can provide a solution, it would be much appreciated!
Click to expand...
Click to collapse
I had the same issue. I reflashed the 4.4.4 OA1 kernel and was able to boot the phone back up. Still can not update device. Currently stuck on:
System Status: Official
Current Binary: Official
Knox Warranty Void: 0X0
Android version 4.4.2,
Baseband version G900AUCU1ANCE,
Build number KOT49H.G900AUCU1ANCE,
Kernel version 3.4.0-3116194,
SE for Android status Enforcing SEPF_SAMSUNG-SM-G900A_4.4.4_0033
At least I got the phone working again. FYI I had a similar issue in the past, went to best buy with an att note 3 and told them every time I try to ota update my phone it fails. And they re flashed my phone with no questions asked and I was able to ota update after that. I haven't got a chance to go to best buy yet but hopefully they can re flash my s5 like my other device and I can get the ota update.

alphamik3 said:
I had the same issue. I reflashed the 4.4.4 OA1 kernel and was able to boot the phone back up. Still can not update device. Currently stuck on:
System Status: Official
Current Binary: Official
Knox Warranty Void: 0X0
Android version 4.4.2,
Baseband version G900AUCU1ANCE,
Build number KOT49H.G900AUCU1ANCE,
Kernel version 3.4.0-3116194,
SE for Android status Enforcing SEPF_SAMSUNG-SM-G900A_4.4.4_0033
At least I got the phone working again. FYI I had a similar issue in the past, went to best buy with an att note 3 and told them every time I try to ota update my phone it fails. And they re flashed my phone with no questions asked and I was able to ota update after that. I haven't got a chance to go to best buy yet but hopefully they can re flash my s5 like my other device and I can get the ota update.
Click to expand...
Click to collapse
I think I had the same problem as you and used the 4.4.4 OA1 Kernal to get it working again. Next I flashed the G900A_Downgrade_to_NCE.tar.md5 and am working and se the last line as 4.4.2 where you have 4.4.4 . I'm guessing you have a mix of 4.4.2 and 4.4.4.

alphamik3 said:
I had the same issue. I reflashed the 4.4.4 OA1 kernel and was able to boot the phone back up. Still can not update device. Currently stuck on:
System Status: Official
Current Binary: Official
Knox Warranty Void: 0X0
Android version 4.4.2,
Baseband version G900AUCU1ANCE,
Build number KOT49H.G900AUCU1ANCE,
Kernel version 3.4.0-3116194,
SE for Android status Enforcing SEPF_SAMSUNG-SM-G900A_4.4.4_0033
At least I got the phone working again. FYI I had a similar issue in the past, went to best buy with an att note 3 and told them every time I try to ota update my phone it fails. And they re flashed my phone with no questions asked and I was able to ota update after that. I haven't got a chance to go to best buy yet but hopefully they can re flash my s5 like my other device and I can get the ota update.
Click to expand...
Click to collapse
I'm having this same black screen/blue led problem too after I tried to flash back to the stock NCE 4.4.2 from a rooted 5.0 on a g900a. Where did you get the file for the 4.4.4 OA1 kernel? or should I try flashing back to 5.0? I have no idea where to go next at this point. I'm afraid I need to bring my phone to a specialist...

t_maier23 said:
I'm having this same black screen/blue led problem too after I tried to flash back to the stock NCE 4.4.2 from a rooted 5.0 on a g900a. Where did you get the file for the 4.4.4 OA1 kernel? or should I try flashing back to 5.0? I have no idea where to go next at this point. I'm afraid I need to bring my phone to a specialist...
Click to expand...
Click to collapse
Check the at&t s5 section for files and probably better help since its for your model.
Sent from my twi5ted SM-G900A using Tapatalk

alphamik3 said:
I had the same issue. I reflashed the 4.4.4 OA1 kernel and was able to boot the phone back up. Still can not update device. Currently stuck on:
System Status: Official
Current Binary: Official
Knox Warranty Void: 0X0
Android version 4.4.2,
Baseband version G900AUCU1ANCE,
Build number KOT49H.G900AUCU1ANCE,
Kernel version 3.4.0-3116194,
SE for Android status Enforcing SEPF_SAMSUNG-SM-G900A_4.4.4_0033
At least I got the phone working again. FYI I had a similar issue in the past, went to best buy with an att note 3 and told them every time I try to ota update my phone it fails. And they re flashed my phone with no questions asked and I was able to ota update after that. I haven't got a chance to go to best buy yet but hopefully they can re flash my s5 like my other device and I can get the ota update.
Click to expand...
Click to collapse
Thank you very much!
I literally tried everything for 2 days and nothing worked.

i have the same exact issue, any help please???

Just joined the club today and spent already 6h+ trying to get the phone booting up again - is there really no solution to this?

N910H became N910C, and I can't change it...

Hello guys,
I've installed a ROM 6.0.1 with some N6 items, and haven't pay attention, but this ROM was for N910C.
Then, I'm trying to change it back, installing some N910H rom, trying to do the reverse thing, but it was not successful.
Somebody know hot to get my N910H back again??

xicko said:
Hello guys,
I've installed a ROM 6.0.1 with some N6 items, and haven't pay attention, but this ROM was for N910C.
Then, I'm trying to change it back, installing some N910H rom, trying to do the reverse thing, but it was not successful.
Somebody know hot to get my N910H back again??
Click to expand...
Click to collapse
Anybody??

xicko said:
Anybody??
Click to expand...
Click to collapse
Downlod samsung usb drivers & odin tool in your windows pc & Flash N910H official stock firmware
http://www.sammobile.com/firmwares/database/SM-N910H/
After flash firmware in odin make sure you do wipe cache & factory reset from recovery your model will be reverse back to N910H again.

Trex888 said:
Downlod samsung usb drivers & odin tool in your windows pc & Flash N910H official stock firmware
http://www.sammobile.com/firmwares/database/SM-N910H/
After flash firmware in odin make sure you do wipe cache & factory reset from recovery your model will be reverse back to N910H again.
Click to expand...
Click to collapse
Hi Trex888, thanks for your answer,
I already tried this solution, but I cant flash stock via Odin. I assume the phone is checking if the stock rom is n910c, and it gives me an error.
Do you want me to post the error?
Thanks!

xicko said:
Hi Trex888, thanks for your answer,
I already tried this solution, but I cant flash stock via Odin. I assume the phone is checking if the stock rom is n910c, and it gives me an error.
Do you want me to post the error?
Thanks!
Click to expand...
Click to collapse
Go to download mode and Check what exactly your model number is on top of screen and tell me

trex888 said:
go to download mode and check what exactly your model number is on top of screen and tell me
Click to expand...
Click to collapse
odin mode
product name: Sm-n910c
current binary: Custom
system status: Custom
reactivation lock: Off
secure download: Enabled
knox warranty void: 1
ap swrev: 2

xicko said:
odin mode
product name: Sm-n910c
current binary: Custom
system status: Custom
reactivation lock: Off
secure download: Enabled
knox warranty void: 1
ap swrev: 2
Click to expand...
Click to collapse
did you try to flash N910C occicial firmware ? try if it works then your motherboard is orignally N910C AND YOU CANNOT CONVERT TO N910H no matter which custom rom you flash it cannot change moherboard model

Trex888 said:
did you try to flash N910C occicial firmware ? try if it works then your motherboard is orignally N910C AND YOU CANNOT CONVERT TO N910H no matter which custom rom you flash it cannot change moherboard model
Click to expand...
Click to collapse
Man, I'm laughting a lot!!! I've made a great confusion between my last mobile (g900h) and this one.
I'm sorry. Thanks for your help!!!

aboot fused 2 binary 1

Hello Guys
I have Flashed a ROM and i trying to go back to my old Rom but it still Unpossible
I trying to Flash a Stock Rom
Handy Model J500H
Its Possible to Flash a ROM without the BL but if i start my Phone it will have green flickering on the Screen sorry for my Broke english Can anybody help me?
ODIN MODE
PRODUCT NAME : SW-J500H
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FRP LOCK: OFF
WARRANTY VOID: 0x1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1,T1,H1,R1,A2, P1
SW REV CHECK FAIL: (aboot) Fused 2 Binary 1

Hassan313 said:
Hello Guys
I have Flashed a ROM and i trying to go back to my old Rom but it still Unpossible
I trying to Flash a Stock Rom
Handy Model J500H
Its Possible to Flash a ROM without the BL but if i start my Phone it will have green flickering on the Screen sorry for my Broke english Can anybody help me?
ODIN MODE
PRODUCT NAME : SW-J500H
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FRP LOCK: OFF
WARRANTY VOID: 0x1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1,T1,H1,R1,A2, P1
SW REV CHECK FAIL: (aboot) Fused 2 Binary 1
Click to expand...
Click to collapse
You are trying to downgrade from Marshmallow 6.0.1 to Lollipop 5.1.1? If yes, then check this: http://forum.xda-developers.com/galaxy-j5/how-to/warning-flash-marshmallow-updates-t3500396 ...

Thanks for the speedfull reply i try to Flash this Rom AP_J500HXXU1AOFB_CL672792_QB5435108_REV00_user_low_ship_MULTI_CERT.tar
what for a ROM can i use?
#Henkate said:
You are trying to downgrade from Marshmallow 6.0.1 to Lollipop 5.1.1? If yes, then check this: http://forum.xda-developers.com/galaxy-j5/how-to/warning-flash-marshmallow-updates-t3500396 ...
Click to expand...
Click to collapse

Hassan313 said:
Thanks for the speedfull reply i try to Flash this Rom AP_J500HXXU1AOFB_CL672792_QB5435108_REV00_user_low_ship_MULTI_CERT.tar
what for a ROM can i use?
Click to expand...
Click to collapse
I'm sorry, but i didn't understand you.
You are getting "about fused" error when you are trying to downgrade from 6.0.1 to 5.1.1 ?

AP_J500HXXU1AOFB_CL672792_QB5435108_REV00_user_low_ship_MULTI_CERT.tarActually i have this Rom on my Handy and this is Android 6.0.1 but if i Flash this Rom i got a Display like this http://www.pic-upload.de/view-32287105/20161213_123128.jpg.html

What for a Rom i can Flash now for my Smartphone if i try a 5.1 Rom i will got the Error and if i Flash a 6.0.1 Rom i got a Screen like the Picture and allways if i try to Flash with Odin a BL i got this Error
http://www.pic-upload.de/view-32287105/20161213_123128.jpg.html

No Body with an Idea?

Hassan313 said:
No Body with an Idea?
Click to expand...
Click to collapse
Hey worry not. Got the same problem when i was trying to upgrade to 6.0.1 from 5.1.1 j500f. I was using smartcare(hehe not sure) what i did was i flashed my stock rom 5.1.1 through odin then it booted.i went to recovery did a factory reset and then went to advanced wiped dalvik cache.
Sent from my SM-J500F using Tapatalk

I downloaded this from sammobile.com/firmwares/download/114459/J500HXXU2BPK4_J500HODD2BPK3_BNG/ for the j500h model its a Bangladesch Version and it Works Perfectly in Germany the rom is without the German Language for the Gernan language i downloaded from the Playstore the Language Enabler

Hi, I have j510fn and I was a rom tester,
I have a problem since I flashed
J510FNXXU2APK6_J510FNODD2APK2_J510FNXXU2APK2_HOME.tar.md5
to test light stock rom v3 from Kingraheel
what happens is that NOW I can't flash any other firmware by odin... when I click START it says FAIL and in my device there is this text in red
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
I just want to flash my OFFICIAL firmware
J510FNXXU1APG1_J510FNPHE1APG1_J510FNXWU1APFC_HOME.tar.md5
but I can't... only APK6 firmware works on odin... any other firmware works.... can you help me?
I don't have any NANDROID backup of previous versions... only of my actual firmware... APK6
My computer does not detect my device... I have the drivers installed, and I tried on all the USB ports... it charges but not open files.... PLEASE HELP

TheWalkingSans said:
Hi, I have j510fn and I was a rom tester,
I have a problem since I flashed
J510FNXXU2APK6_J510FNODD2APK2_J510FNXXU2APK2_HOME.tar.md5
to test light stock rom v3 from Kingraheel
what happens is that NOW I can't flash any other firmware by odin... when I click START it says FAIL and in my device there is this text in red
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
I just want to flash my OFFICIAL firmware
J510FNXXU1APG1_J510FNPHE1APG1_J510FNXWU1APFC_HOME.tar.md5
but I can't... only APK6 firmware works on odin... any other firmware works.... can you help me?
I don't have any NANDROID backup of previous versions... only of my actual firmware... APK6
My computer does not detect my device... I have the drivers installed, and I tried on all the USB ports... it charges but not open files.... PLEASE HELP
Click to expand...
Click to collapse
No need to post twice.

I heard that you cannot downgrade android due to not allowed downgrade of bootloader (aboot.mbn). So stupid dude.

Hello i have the same problem. But until now i cannot downgrade to 5.1.1 via original firmware but i can install cm 12.1 and others. Via editing the kernel of said rom make it the same with the 6.0.1 bootloader.

---------------------------------------
SOLVED, SAME PROBLEM? CONTACT ME
Sent from my SM-J510FN using XDA Labs

TheWalkingSans said:
---------------------------------------
SOLVED, SAME PROBLEM? CONTACT ME
Sent from my SM-J510FN using XDA Labs
Click to expand...
Click to collapse
Why not writing the solution here or in the warning thread?
People could see it without contacting you, without any delay.

Its a little bit long, but I will post it ASAP
Sent from my SM-J510FN using XDA Labs
---------- Post added at 09:14 PM ---------- Previous post was at 08:51 PM ----------
Here is HOW I SOLVED IT:
This error happens when you before have updated from "U1" to "U2" and then you try to flash a firmware with "U1" (UX appears in the firmware "name")
So, the simple solution is to flash the stock firmware with the same "UX" that you had before your device gor bricked.
In my case, testing KingRaheel's ROMS I flashed an Indian firmware (...U2APK6...) at this moment I didn't know I ****ed up. But don't worry, I simply had updated the "U" and how I didn't know it, I tried to flash lots and lots of firmwares with "U1" without knowing what was happening. After long nights, I tried to flash my last firmware from SPAIN (PHE) with "U2" and it worked.
I hope I helped you. I used SM-J510FN (J5 2016)
If you have another device, try the same but with your current model, any questions, ask by twitter/dm
Sent from my SM-J510FN using XDA Labs

[help] Can't install firmware cos SW Rev. CHECK FAIL (BOOTLOADER) DEVICE: 4 BINARY: 3

Hi. I wanted to root my s8 but after reboot i get: "Only official firmware.."
So i tried to reinstall stock firmware and get "SW Rev. CHECK FAIL (BOOTLOADER) DEVICE: 4 BINARY: 3"
That means i tried to install version 3 BL when i already have BL v.4 on my phone.
But firmware name tells that its v.4 BL (G955FXXU4CRI5)
Now my phone is bricked and i cant install anything.
Please help

So i just tried install firmware from s8+
(idk how. This was dowloaded and i thought its for s8)
I used samfirm now and it worked

Gruglu said:
So i just tried install firmware from s8+
(idk how. This was dowloaded and i thought its for s8)
I used samfirm now and it worked
Click to expand...
Click to collapse
Hi can you talk me haw do u fix it thx

theohtc said:
Hi can you talk me haw do u fix it thx
Click to expand...
Click to collapse
You are trying to install older firmware than on the device. Download your latest firmware and reflash with latest odin

Thx brother its work god Plees u

Only official released binaries are allowed to be flashed(Recovery) Galaxy S8 G950FD

Hi folks, is there any solution to update Samsung recovery to TWRP 3.3.1 (the most current) without that error?:crying::crying:
I feel that the problem is due to the new binary (5).
Right now I can use the phone but I can't root it ...
I've tried flashing Other methods but they all throw the same Error at me.
Help!! hehehe

Good day everybody! The same error, Please help. I have the situation when i am try to flash twrp on samsung s8 sm-g950fd. I have next massage appear in the downloading mode: " Only original binaries can be flashed". OEM unlock switch on - everithing ok. System Andorid 9.0. I am try to flash twrp in downloading mode, in the same time when i am start to flash, i am hold on the button on/off, volume up and bixby, but the phone not switch off., and this msg appear .Please help.

Binario
The same thing happened to me
I flashed the first number 5 BTU binary and it worked

ERROR

dj.marcio said:
The same thing happened to me
I flashed the first number 5 BTU binary and it worked
Click to expand...
Click to collapse
There is no BTU for G950FD, did you just use the U5 950F firmware?

Its work on SM-G955F S8 Plus ??

bothered said:
There is no BTU for G950FD, did you just use the U5 950F firmware?
Click to expand...
Click to collapse
I have used many firmwares from other countries and it still does not work.

G950fxxs5dsf1
G950fxxs5dsf1