Hello guys,
I've installed a ROM 6.0.1 with some N6 items, and haven't pay attention, but this ROM was for N910C.
Then, I'm trying to change it back, installing some N910H rom, trying to do the reverse thing, but it was not successful.
Somebody know hot to get my N910H back again??
xicko said:
Hello guys,
I've installed a ROM 6.0.1 with some N6 items, and haven't pay attention, but this ROM was for N910C.
Then, I'm trying to change it back, installing some N910H rom, trying to do the reverse thing, but it was not successful.
Somebody know hot to get my N910H back again??
Click to expand...
Click to collapse
Anybody??
xicko said:
Anybody??
Click to expand...
Click to collapse
Downlod samsung usb drivers & odin tool in your windows pc & Flash N910H official stock firmware
http://www.sammobile.com/firmwares/database/SM-N910H/
After flash firmware in odin make sure you do wipe cache & factory reset from recovery your model will be reverse back to N910H again.
Trex888 said:
Downlod samsung usb drivers & odin tool in your windows pc & Flash N910H official stock firmware
http://www.sammobile.com/firmwares/database/SM-N910H/
After flash firmware in odin make sure you do wipe cache & factory reset from recovery your model will be reverse back to N910H again.
Click to expand...
Click to collapse
Hi Trex888, thanks for your answer,
I already tried this solution, but I cant flash stock via Odin. I assume the phone is checking if the stock rom is n910c, and it gives me an error.
Do you want me to post the error?
Thanks!
xicko said:
Hi Trex888, thanks for your answer,
I already tried this solution, but I cant flash stock via Odin. I assume the phone is checking if the stock rom is n910c, and it gives me an error.
Do you want me to post the error?
Thanks!
Click to expand...
Click to collapse
Go to download mode and Check what exactly your model number is on top of screen and tell me
trex888 said:
go to download mode and check what exactly your model number is on top of screen and tell me
Click to expand...
Click to collapse
odin mode
product name: Sm-n910c
current binary: Custom
system status: Custom
reactivation lock: Off
secure download: Enabled
knox warranty void: 1
ap swrev: 2
xicko said:
odin mode
product name: Sm-n910c
current binary: Custom
system status: Custom
reactivation lock: Off
secure download: Enabled
knox warranty void: 1
ap swrev: 2
Click to expand...
Click to collapse
did you try to flash N910C occicial firmware ? try if it works then your motherboard is orignally N910C AND YOU CANNOT CONVERT TO N910H no matter which custom rom you flash it cannot change moherboard model
Trex888 said:
did you try to flash N910C occicial firmware ? try if it works then your motherboard is orignally N910C AND YOU CANNOT CONVERT TO N910H no matter which custom rom you flash it cannot change moherboard model
Click to expand...
Click to collapse
Man, I'm laughting a lot!!! I've made a great confusion between my last mobile (g900h) and this one.
I'm sorry. Thanks for your help!!!
Related
Alright, fellow S4 owners.
My stupidity has caused some serious issues.
I have the GT-i9505, everything was going great. Had Jamal's Nexus ROM on there, went to flash another ROM. BAM, first mistake. Didn't make a backup (Yes, I know about my signature).
Second mistake, wiped everything including firmware. I'm currently downloading UK firmware which was originally on the phone, however I'm not even quite sure I have the correct region code for this one as it is unbranded.
Tried connecting to Kies, said something along the lines of "Device does not support initialising".
All I have right now is the download screen, just going down the list:
ODIN MODE
Product Name: GT-I9505
Current Binary: Custom
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
CSB-CONFIG-LSB: 0x30
Write Protection: Enable
The big message says: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Any help would be appreciated.
Just flash any latest stock firmware in Odin and you'll be up and running again mate.
You can find firmware on Sammobile
BTU is unbranded UK firmware I believe.
Sent from my GT-I9505 using XDA Premium HD app
Well, I'm certainly hoping. I have been downloading the firmware for about 3 hours now. Damn you Terafile.
EDIT: Alright, got the S4 back up and running, however I downloaded UK firmware, but I don't believe it's the BTU as suggested. Are there any immediate side effects of this?
Cyanidex00 said:
Well, I'm certainly hoping. I have been downloading the firmware for about 3 hours now. Damn you Terafile.
EDIT: Alright, got the S4 back up and running, however I downloaded UK firmware, but I don't believe it's the BTU as suggested. Are there any immediate side effects of this?
Click to expand...
Click to collapse
- This is latest BTU for u phone: HERE
- When u finish of flash with ODIN u can root it
- Conect it to KIES 3, maybe it will tell ya u have the latest firmware installed. If no take a look close the word CSC and btw () u will have ur phone code
- If u need change it:
- Make a SD Internal Backup
- For change CSC only download this program HERE.
- If works, enjoy it :highfive:
please Help Me !!!! My phone SM-G530H and I Want to flash stock rom or any rom from Download Mode but every thing Fail !!!! :crying::crying::crying::crying:
it's show "KNOX Check Fail : aboot" any thing i want to flash it failed ! why ??!! :crying::crying:
is this problem Cause KNOX Bootloader ?? and " Download secure : ENABLE " is this problem because my download protected ?
my mobile android version is KitKat 4.4.4 if i delete aboot.mbn and bootloader files from stock russian lollipop and flashed it will break my phone ?????????? and i will no be able to return to stock rom kitkat because i can't install anyrom ?
same here, but my problem is SECURE CHECKFAIL : recovery...
download correct rom. check baseband xxu or xcu ..
Killwish said:
download correct rom. check baseband xxu or xcu ..
Click to expand...
Click to collapse
I tried but no luck and i want to install anything like custom recovery or stock russian Lolipop is this bootloader problem ? how to unlock knox bootloader in galaxy grand prime ? or flash anything
mohamedfaky said:
I tried but no luck and i want to install anything like custom recovery or stock russian Lolipop is this bootloader problem ? how to unlock knox bootloader in galaxy grand prime ? or flash anything
Click to expand...
Click to collapse
" Could not be normal boot " ?!!!!!!!!!!!!!!! :crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
download this firmware as long as it matches whats originally on the phone.
http://www.sammobile.com/firmwares/download/35758/G530HXXU1ANI8_G530HSER1ANI8_SER/
use the newest odin and flash it in the ap slot with stock settings
silentgumm said:
download this firmware as long as it matches whats originally on the phone.
http://www.sammobile/firmwares/download/35758/G530HXXU1ANI8_G530HSER1ANI8_SER/
use the newest odin and flash it in the ap slot with stock settings
Click to expand...
Click to collapse
Thank you but my mobile can't install any rom from another country so i downloaded stock rom from my country and flashed it success and my problem has solved but i want to install stock lollipop rom what should i do ? Lollipop stock rom only russian country and odin always fail if you know how to install lollipop from russian country please tell me ( in my phone show " KNOX Check fail : aboot " and Thank you
Hello so here is the problem, I restarted my phone last night then i got a error saying custom binary blocked by frp lock. So i followed steps and waited hours for firmware to download to get nothing but fails on Odin. I am now getting SW REV. CHECK FAIL DEVICE: 2 BINARY: 1
I have downloaded the very last firmware from this site and it has not worked any suggestions would be very helpful.
the website is: sammobile SM-G928P the very last one the is 5.1.1
I could use any help please and thank you.
DETAILS: SM-G928P (Samsung Galaxy S6 Edge +)
Current Binary: Custom
System Status: Custom
FRP Lock: On
Phone cannot be used at all but the Downloading screen ODIN MODE and the start up screen with the custom binary blocked frp lock
try update your phone with lastest verion 6.0.1 G928PVPS2BPD1
KingGoldenWax said:
Hello so here is the problem, I restarted my phone last night then i got a error saying custom binary blocked by frp lock. So i followed steps and waited hours for firmware to download to get nothing but fails on Odin. I am now getting SW REV. CHECK FAIL DEVICE: 2 BINARY: 1
I have downloaded the very last firmware from this site and it has not worked any suggestions would be very helpful.
the website is: sammobile SM-G928P the very last one the is 5.1.1
I could use any help please and thank you.
DETAILS: SM-G928P (Samsung Galaxy S6 Edge +)
Current Binary: Custom
System Status: Custom
FRP Lock: On
Phone cannot be used at all but the Downloading screen ODIN MODE and the start up screen with the custom binary blocked frp lock
Click to expand...
Click to collapse
blocked frp loc k
you need flash stock rom will be fix this problem
good luck
thanhman18 said:
try update your phone with lastest verion 6.0.1 G928PVPS2BPD1
Click to expand...
Click to collapse
I am downloading the one you listed 6.0.1 G928PVPS2BPD1 It will be done downloading in 2 hours. Then I will place it in AP spot then click start and hope the it works. Will keep you updated thanks for the help.
yaniyu said:
blocked frp loc k
you need flash stock rom will be fix this problem
good luck
Click to expand...
Click to collapse
I am downloading 6.0.1 G928PVPS2BPD1 right now. What stock rom are you talking about the 5.1.1 firmware? I appreciate the help, just do not know what stock rom to flash I will search up G928PVPS2BPD1 stock rom or S6 edge + stock rom right now.
thanhman18 said:
try update your phone with lastest verion 6.0.1 G928PVPS2BPD1
Click to expand...
Click to collapse
It worked thank you so much.
kinggoldenwax said:
i am downloading 6.0.1 g928pvps2bpd1 right now. What stock rom are you talking about the 5.1.1 firmware? I appreciate the help, just do not know what stock rom to flash i will search up g928pvps2bpd1 stock rom or s6 edge + stock rom right now.
Click to expand...
Click to collapse
g928pvps2bpd1
Hello Guys
I have Flashed a ROM and i trying to go back to my old Rom but it still Unpossible
I trying to Flash a Stock Rom
Handy Model J500H
Its Possible to Flash a ROM without the BL but if i start my Phone it will have green flickering on the Screen sorry for my Broke english Can anybody help me?
ODIN MODE
PRODUCT NAME : SW-J500H
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FRP LOCK: OFF
WARRANTY VOID: 0x1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1,T1,H1,R1,A2, P1
SW REV CHECK FAIL: (aboot) Fused 2 Binary 1
Hassan313 said:
Hello Guys
I have Flashed a ROM and i trying to go back to my old Rom but it still Unpossible
I trying to Flash a Stock Rom
Handy Model J500H
Its Possible to Flash a ROM without the BL but if i start my Phone it will have green flickering on the Screen sorry for my Broke english Can anybody help me?
ODIN MODE
PRODUCT NAME : SW-J500H
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FRP LOCK: OFF
WARRANTY VOID: 0x1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1,T1,H1,R1,A2, P1
SW REV CHECK FAIL: (aboot) Fused 2 Binary 1
Click to expand...
Click to collapse
You are trying to downgrade from Marshmallow 6.0.1 to Lollipop 5.1.1? If yes, then check this: http://forum.xda-developers.com/galaxy-j5/how-to/warning-flash-marshmallow-updates-t3500396 ...
Thanks for the speedfull reply i try to Flash this Rom AP_J500HXXU1AOFB_CL672792_QB5435108_REV00_user_low_ship_MULTI_CERT.tar
what for a ROM can i use?
#Henkate said:
You are trying to downgrade from Marshmallow 6.0.1 to Lollipop 5.1.1? If yes, then check this: http://forum.xda-developers.com/galaxy-j5/how-to/warning-flash-marshmallow-updates-t3500396 ...
Click to expand...
Click to collapse
Hassan313 said:
Thanks for the speedfull reply i try to Flash this Rom AP_J500HXXU1AOFB_CL672792_QB5435108_REV00_user_low_ship_MULTI_CERT.tar
what for a ROM can i use?
Click to expand...
Click to collapse
I'm sorry, but i didn't understand you.
You are getting "about fused" error when you are trying to downgrade from 6.0.1 to 5.1.1 ?
AP_J500HXXU1AOFB_CL672792_QB5435108_REV00_user_low_ship_MULTI_CERT.tarActually i have this Rom on my Handy and this is Android 6.0.1 but if i Flash this Rom i got a Display like this http://www.pic-upload.de/view-32287105/20161213_123128.jpg.html
What for a Rom i can Flash now for my Smartphone if i try a 5.1 Rom i will got the Error and if i Flash a 6.0.1 Rom i got a Screen like the Picture and allways if i try to Flash with Odin a BL i got this Error
http://www.pic-upload.de/view-32287105/20161213_123128.jpg.html
No Body with an Idea?
Hassan313 said:
No Body with an Idea?
Click to expand...
Click to collapse
Hey worry not. Got the same problem when i was trying to upgrade to 6.0.1 from 5.1.1 j500f. I was using smartcare(hehe not sure) what i did was i flashed my stock rom 5.1.1 through odin then it booted.i went to recovery did a factory reset and then went to advanced wiped dalvik cache.
Sent from my SM-J500F using Tapatalk
I downloaded this from sammobile.com/firmwares/download/114459/J500HXXU2BPK4_J500HODD2BPK3_BNG/ for the j500h model its a Bangladesch Version and it Works Perfectly in Germany the rom is without the German Language for the Gernan language i downloaded from the Playstore the Language Enabler
Hi, I have j510fn and I was a rom tester,
I have a problem since I flashed
J510FNXXU2APK6_J510FNODD2APK2_J510FNXXU2APK2_HOME.tar.md5
to test light stock rom v3 from Kingraheel
what happens is that NOW I can't flash any other firmware by odin... when I click START it says FAIL and in my device there is this text in red
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
I just want to flash my OFFICIAL firmware
J510FNXXU1APG1_J510FNPHE1APG1_J510FNXWU1APFC_HOME.tar.md5
but I can't... only APK6 firmware works on odin... any other firmware works.... can you help me?
I don't have any NANDROID backup of previous versions... only of my actual firmware... APK6
My computer does not detect my device... I have the drivers installed, and I tried on all the USB ports... it charges but not open files.... PLEASE HELP
TheWalkingSans said:
Hi, I have j510fn and I was a rom tester,
I have a problem since I flashed
J510FNXXU2APK6_J510FNODD2APK2_J510FNXXU2APK2_HOME.tar.md5
to test light stock rom v3 from Kingraheel
what happens is that NOW I can't flash any other firmware by odin... when I click START it says FAIL and in my device there is this text in red
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
I just want to flash my OFFICIAL firmware
J510FNXXU1APG1_J510FNPHE1APG1_J510FNXWU1APFC_HOME.tar.md5
but I can't... only APK6 firmware works on odin... any other firmware works.... can you help me?
I don't have any NANDROID backup of previous versions... only of my actual firmware... APK6
My computer does not detect my device... I have the drivers installed, and I tried on all the USB ports... it charges but not open files.... PLEASE HELP
Click to expand...
Click to collapse
No need to post twice.
I heard that you cannot downgrade android due to not allowed downgrade of bootloader (aboot.mbn). So stupid dude.
Hello i have the same problem. But until now i cannot downgrade to 5.1.1 via original firmware but i can install cm 12.1 and others. Via editing the kernel of said rom make it the same with the 6.0.1 bootloader.
---------------------------------------
SOLVED, SAME PROBLEM? CONTACT ME
Sent from my SM-J510FN using XDA Labs
TheWalkingSans said:
---------------------------------------
SOLVED, SAME PROBLEM? CONTACT ME
Sent from my SM-J510FN using XDA Labs
Click to expand...
Click to collapse
Why not writing the solution here or in the warning thread?
People could see it without contacting you, without any delay.
Its a little bit long, but I will post it ASAP
Sent from my SM-J510FN using XDA Labs
---------- Post added at 09:14 PM ---------- Previous post was at 08:51 PM ----------
Here is HOW I SOLVED IT:
This error happens when you before have updated from "U1" to "U2" and then you try to flash a firmware with "U1" (UX appears in the firmware "name")
So, the simple solution is to flash the stock firmware with the same "UX" that you had before your device gor bricked.
In my case, testing KingRaheel's ROMS I flashed an Indian firmware (...U2APK6...) at this moment I didn't know I ****ed up. But don't worry, I simply had updated the "U" and how I didn't know it, I tried to flash lots and lots of firmwares with "U1" without knowing what was happening. After long nights, I tried to flash my last firmware from SPAIN (PHE) with "U2" and it worked.
I hope I helped you. I used SM-J510FN (J5 2016)
If you have another device, try the same but with your current model, any questions, ask by twitter/dm
Sent from my SM-J510FN using XDA Labs
Hi, I have j510fn and I was a rom tester,
I have a problem since I flashed
J510FNXXU2APK6_J510FNODD2APK2_J510FNXXU2APK2_HOME.tar.md5
to test light stock rom v3 from Kingraheel
what happens is that NOW I can't flash any other firmware by odin... when I click START it says FAIL and in my device there is this text in red
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
I just want to flash my OFFICIAL firmware
J510FNXXU1APG1_J510FNPHE1APG1_J510FNXWU1APFC_HOME.tar.md5
but I can't... only APK6 firmware works on odin... any other firmware works.... can you help me?
I don't have any NANDROID backup of previous versions... only of my actual firmware... APK6
My computer does not detect my device... I have the drivers installed, and I tried on all the USB ports... it charges but not open files.... PLEASE HELP
TheWalkingSans said:
Hi, I have j510fn and I was a rom tester,
I have a problem since I flashed
J510FNXXU2APK6_J510FNODD2APK2_J510FNXXU2APK2_HOME.tar.md5
to test light stock rom v3 from Kingraheel
what happens is that NOW I can't flash any other firmware by odin... when I click START it says FAIL and in my device there is this text in red
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
I just want to flash my OFFICIAL firmware
J510FNXXU1APG1_J510FNPHE1APG1_J510FNXWU1APFC_HOME.tar.md5
but I can't... only APK6 firmware works on odin... any other firmware works.... can you help me?
I don't have any NANDROID backup of previous versions... only of my actual firmware... APK6
My computer does not detect my device... I have the drivers installed, and I tried on all the USB ports... it charges but not open files.... PLEASE HELP
Click to expand...
Click to collapse
You can't downgrade your firmware, your device has a revision 2 bootloader, you need to flash revision 2 firmware.
ashyx said:
You can't downgrade your firmware, your device has a revision 2 bootloader, you need to flash revision 2 firmware.
Click to expand...
Click to collapse
Downgrade? I wasn't downgrading dude, it was the firmware requires for Light Stock Rom V3 from KingRaheel... it was at the same version, same in v1.1 and n7 hybrid... and all of them worked before... and NOW no
TheWalkingSans said:
Downgrade? I wasn't downgrading dude, it was the firmware requires for Light Stock Rom V3 from KingRaheel... it was at the same version, same in v1.1 and n7 hybrid... and all of them worked before... and NOW no
Click to expand...
Click to collapse
Please don't be flippant Im trying to help you. [emoji55]
You have flashed the APK6 firmware which is a revision 2 firmware.
The firmware you are trying to flash is revision 1.
You can't downgrade revisions. It worked before because your device still had revision 1 firmware installed.
ashyx said:
Please don't be flippant Im trying to help you. [emoji55]
You have flashed the APK6 firmware which is a revision 2 firmware.
The firmware you are trying to flash is revision 1.
You can't downgrade revisions. It worked before because your device still had revision 1 firmware installed.
Click to expand...
Click to collapse
So, what do I do now? How do I check my fevision firmware?
TheWalkingSans said:
So, what do I do now? How do I check my fevision firmware?
Click to expand...
Click to collapse
You can view the revision information in Odin (download) mode.
Post the details or screenshot for confirmation.
ashyx said:
you can view the revision information in odin (download) mode.
Post the details or screenshot for confirmation.
Click to expand...
Click to collapse
odin mode
product name: Sm-j510fn
current binary: Custom
system status: Custom
frp lock: Off
warranty void: 0x1 (2)
qualcom sevureboot: Enable (csb)
rp swrev: S1, t1, h1, r1, a2, p1
secure download: Enable
TheWalkingSans said:
odin mode
product name: Sm-j510fn
current binary: Custom
system status: Custom
frp lock: Off
warranty void: 0x1 (2)
qualcom sevureboot: Enable (csb)
rp swrev: S1, t1, h1, r1, a2, p1
secure download: Enable
Click to expand...
Click to collapse
Aboot is revision 2 so you can't downgrade the bootloader.
If you remove it from the revision 1 firmware the rest of it may flash.
ashyx said:
Aboot is revision 2 so you can't downgrade the bootloader.
If you remove it from the revision 1 firmware the rest of it may flash.
Click to expand...
Click to collapse
H - O - W - ?
TheWalkingSans said:
H - O - W - ?
Click to expand...
Click to collapse
Instead of attempting to downgrade why not just flash the revision 2 firmware for your device?
ashyx said:
Instead of attempting to downgrade why not just flash the revision 2 firmware for your device?
Click to expand...
Click to collapse
Again, How? Haha
TheWalkingSans said:
Again, How? Haha
Click to expand...
Click to collapse
With odin:
https://samsung-firmware.org/download/Galaxy J5 ⑥/e083/PHE/J510FNXXU2APL4/J510FNPHE2APL1/
ashyx said:
With odin:
https://samsung-firmware.org/download/Galaxy J5 ⑥/e083/PHE/J510FNXXU2APL4/J510FNPHE2APL1/
Click to expand...
Click to collapse
Dude, i have this firmware installed
TheWalkingSans said:
Dude, i have this firmware installed
Click to expand...
Click to collapse
You stated APK6 for region ODD.
This is update APL4 for region PHE.
If you indeed have that installed why do you need to downgrade?
ashyx said:
You stated APK6 for region ODD.
This is update APL4 for region PHE.
If you indeed have that installed why do you need to downgrade?
Click to expand...
Click to collapse
Actually I have installed APL4 but in next days I will have to flash other versions to test roms... How do I know if I can flash those wothout getting that error?
TheWalkingSans said:
Actually I have installed APL4 but in next days I will have to flash other versions to test roms... How do I know if I can flash those wothout getting that error?
Click to expand...
Click to collapse
Are these custom roms flashed with twrp?
If so you should be fine as these don't contain the bootloader.
It looks like the revision 2 bootloader is backwards compatible with earlier revision 1 firmware.
ashyx said:
Are these custom roms flashed with twrp?
If so you should be fine as these don't contain the bootloader.
It looks like the revision 2 bootloader is backwards compatible with earlier revision 1 firmware.
Click to expand...
Click to collapse
Yes they are, but first I have to flash by odin the correcr stock firmware for those roms because if not the wifi does not work
TheWalkingSans said:
Yes they are, but first I have to flash by odin the correcr stock firmware for those roms because if not the wifi does not work
Click to expand...
Click to collapse
Extract the NON-HLOS.bin from the firmware and repack it to tar format then flash with odin after flashing the custom rom.
That usually cures loss of wifi.
Otherwise you will need to remove aboot from the firmware before flashing with odin.
Neither of the above will guarantee that wifi will work as the bootloader will decide if it will allow the firmware to be mismatched.
ashyx said:
Extract the NON-HLOS.bin from the firmware and repack it to tar format then flash with odin after flashing the custom rom.
That usually cures loss of wifi.
Otherwise you will need to remove aboot from the firmware before flashing with odin.
Neither of the above will guarantee that wifi will work as the bootloader will decide if it will allow the firmware to be mismatched.
Click to expand...
Click to collapse
Guide step by step?
---------------------------------------
SOLVED, SAME PROBLEM? CONTACT ME
Here is HOW I SOLVED IT:
This error happens when you before have updated from "U1" to "U2" and then you try to flash a firmware with "U1" (UX appears in the firmware "name")
So, the simple solution is to flash the stock firmware with the same "UX" that you had before your device gor bricked.
In my case, testing KingRaheel's ROMS I flashed an Indian firmware (...U2APK6...) at this moment I didn't know I ****ed up. But don't worry, I simply had updated the "U" and how I didn't know it, I tried to flash lots and lots of firmwares with "U1" without knowing what was happening. After long nights, I tried to flash my last firmware from SPAIN (PHE) with "U2" and it worked.
I hope I helped you. I used SM-J510FN (J5 2016)
If you have another device, try the same but with your current model, any questions, ask by twitter/dm
Sent from my SM-J510FN using XDA Labs