Hi, I have j510fn and I was a rom tester,
I have a problem since I flashed
J510FNXXU2APK6_J510FNODD2APK2_J510FNXXU2APK2_HOME.tar.md5
to test light stock rom v3 from Kingraheel
what happens is that NOW I can't flash any other firmware by odin... when I click START it says FAIL and in my device there is this text in red
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
I just want to flash my OFFICIAL firmware
J510FNXXU1APG1_J510FNPHE1APG1_J510FNXWU1APFC_HOME.tar.md5
but I can't... only APK6 firmware works on odin... any other firmware works.... can you help me?
I don't have any NANDROID backup of previous versions... only of my actual firmware... APK6
My computer does not detect my device... I have the drivers installed, and I tried on all the USB ports... it charges but not open files.... PLEASE HELP
TheWalkingSans said:
Hi, I have j510fn and I was a rom tester,
I have a problem since I flashed
J510FNXXU2APK6_J510FNODD2APK2_J510FNXXU2APK2_HOME.tar.md5
to test light stock rom v3 from Kingraheel
what happens is that NOW I can't flash any other firmware by odin... when I click START it says FAIL and in my device there is this text in red
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
I just want to flash my OFFICIAL firmware
J510FNXXU1APG1_J510FNPHE1APG1_J510FNXWU1APFC_HOME.tar.md5
but I can't... only APK6 firmware works on odin... any other firmware works.... can you help me?
I don't have any NANDROID backup of previous versions... only of my actual firmware... APK6
My computer does not detect my device... I have the drivers installed, and I tried on all the USB ports... it charges but not open files.... PLEASE HELP
Click to expand...
Click to collapse
You can't downgrade your firmware, your device has a revision 2 bootloader, you need to flash revision 2 firmware.
ashyx said:
You can't downgrade your firmware, your device has a revision 2 bootloader, you need to flash revision 2 firmware.
Click to expand...
Click to collapse
Downgrade? I wasn't downgrading dude, it was the firmware requires for Light Stock Rom V3 from KingRaheel... it was at the same version, same in v1.1 and n7 hybrid... and all of them worked before... and NOW no
TheWalkingSans said:
Downgrade? I wasn't downgrading dude, it was the firmware requires for Light Stock Rom V3 from KingRaheel... it was at the same version, same in v1.1 and n7 hybrid... and all of them worked before... and NOW no
Click to expand...
Click to collapse
Please don't be flippant Im trying to help you. [emoji55]
You have flashed the APK6 firmware which is a revision 2 firmware.
The firmware you are trying to flash is revision 1.
You can't downgrade revisions. It worked before because your device still had revision 1 firmware installed.
ashyx said:
Please don't be flippant Im trying to help you. [emoji55]
You have flashed the APK6 firmware which is a revision 2 firmware.
The firmware you are trying to flash is revision 1.
You can't downgrade revisions. It worked before because your device still had revision 1 firmware installed.
Click to expand...
Click to collapse
So, what do I do now? How do I check my fevision firmware?
TheWalkingSans said:
So, what do I do now? How do I check my fevision firmware?
Click to expand...
Click to collapse
You can view the revision information in Odin (download) mode.
Post the details or screenshot for confirmation.
ashyx said:
you can view the revision information in odin (download) mode.
Post the details or screenshot for confirmation.
Click to expand...
Click to collapse
odin mode
product name: Sm-j510fn
current binary: Custom
system status: Custom
frp lock: Off
warranty void: 0x1 (2)
qualcom sevureboot: Enable (csb)
rp swrev: S1, t1, h1, r1, a2, p1
secure download: Enable
TheWalkingSans said:
odin mode
product name: Sm-j510fn
current binary: Custom
system status: Custom
frp lock: Off
warranty void: 0x1 (2)
qualcom sevureboot: Enable (csb)
rp swrev: S1, t1, h1, r1, a2, p1
secure download: Enable
Click to expand...
Click to collapse
Aboot is revision 2 so you can't downgrade the bootloader.
If you remove it from the revision 1 firmware the rest of it may flash.
ashyx said:
Aboot is revision 2 so you can't downgrade the bootloader.
If you remove it from the revision 1 firmware the rest of it may flash.
Click to expand...
Click to collapse
H - O - W - ?
TheWalkingSans said:
H - O - W - ?
Click to expand...
Click to collapse
Instead of attempting to downgrade why not just flash the revision 2 firmware for your device?
ashyx said:
Instead of attempting to downgrade why not just flash the revision 2 firmware for your device?
Click to expand...
Click to collapse
Again, How? Haha
TheWalkingSans said:
Again, How? Haha
Click to expand...
Click to collapse
With odin:
https://samsung-firmware.org/download/Galaxy J5 ⑥/e083/PHE/J510FNXXU2APL4/J510FNPHE2APL1/
ashyx said:
With odin:
https://samsung-firmware.org/download/Galaxy J5 ⑥/e083/PHE/J510FNXXU2APL4/J510FNPHE2APL1/
Click to expand...
Click to collapse
Dude, i have this firmware installed
TheWalkingSans said:
Dude, i have this firmware installed
Click to expand...
Click to collapse
You stated APK6 for region ODD.
This is update APL4 for region PHE.
If you indeed have that installed why do you need to downgrade?
ashyx said:
You stated APK6 for region ODD.
This is update APL4 for region PHE.
If you indeed have that installed why do you need to downgrade?
Click to expand...
Click to collapse
Actually I have installed APL4 but in next days I will have to flash other versions to test roms... How do I know if I can flash those wothout getting that error?
TheWalkingSans said:
Actually I have installed APL4 but in next days I will have to flash other versions to test roms... How do I know if I can flash those wothout getting that error?
Click to expand...
Click to collapse
Are these custom roms flashed with twrp?
If so you should be fine as these don't contain the bootloader.
It looks like the revision 2 bootloader is backwards compatible with earlier revision 1 firmware.
ashyx said:
Are these custom roms flashed with twrp?
If so you should be fine as these don't contain the bootloader.
It looks like the revision 2 bootloader is backwards compatible with earlier revision 1 firmware.
Click to expand...
Click to collapse
Yes they are, but first I have to flash by odin the correcr stock firmware for those roms because if not the wifi does not work
TheWalkingSans said:
Yes they are, but first I have to flash by odin the correcr stock firmware for those roms because if not the wifi does not work
Click to expand...
Click to collapse
Extract the NON-HLOS.bin from the firmware and repack it to tar format then flash with odin after flashing the custom rom.
That usually cures loss of wifi.
Otherwise you will need to remove aboot from the firmware before flashing with odin.
Neither of the above will guarantee that wifi will work as the bootloader will decide if it will allow the firmware to be mismatched.
ashyx said:
Extract the NON-HLOS.bin from the firmware and repack it to tar format then flash with odin after flashing the custom rom.
That usually cures loss of wifi.
Otherwise you will need to remove aboot from the firmware before flashing with odin.
Neither of the above will guarantee that wifi will work as the bootloader will decide if it will allow the firmware to be mismatched.
Click to expand...
Click to collapse
Guide step by step?
---------------------------------------
SOLVED, SAME PROBLEM? CONTACT ME
Here is HOW I SOLVED IT:
This error happens when you before have updated from "U1" to "U2" and then you try to flash a firmware with "U1" (UX appears in the firmware "name")
So, the simple solution is to flash the stock firmware with the same "UX" that you had before your device gor bricked.
In my case, testing KingRaheel's ROMS I flashed an Indian firmware (...U2APK6...) at this moment I didn't know I ****ed up. But don't worry, I simply had updated the "U" and how I didn't know it, I tried to flash lots and lots of firmwares with "U1" without knowing what was happening. After long nights, I tried to flash my last firmware from SPAIN (PHE) with "U2" and it worked.
I hope I helped you. I used SM-J510FN (J5 2016)
If you have another device, try the same but with your current model, any questions, ask by twitter/dm
Sent from my SM-J510FN using XDA Labs
Related
Hey i have note 3 so i installed the kies and a message poped up that says
a new update is available
Current firmware version : PDA:MI7 / PHONE:MI6 / CSC:MI2 (PHN)
Latest firmware version : PDA:MJ3 / PHONE:MJ2 / CSC:MJ3 (PHN)
my device is rooted so if i click update via kies will it unroot my device?what is the best thing to do in my situation to have the latest firmware?and if i will unroot the device will i have region lock?
VodkaPlease said:
Hey i have note 3 so i installed the kies and a message poped up that says
a new update is available
Current firmware version : PDA:MI7 / PHONE:MI6 / CSC:MI2 (PHN)
Latest firmware version : PDA:MJ3 / PHONE:MJ2 / CSC:MJ3 (PHN)
my device is rooted so if i click update via kies will it unroot my device?what is the best thing to do in my situation to have the latest firmware?and if i will unroot the device will i have region lock?
Click to expand...
Click to collapse
You may refer to this thread
http://forum.xda-developers.com/showthread.php?t=2522729
williamyi said:
You may refer to this thread
http://forum.xda-developers.com/showthread.php?t=2522729
Click to expand...
Click to collapse
+100000000
williamyi said:
You may refer to this thread
http://forum.xda-developers.com/showthread.php?t=2522729
Click to expand...
Click to collapse
ultramag69 said:
+100000000
Click to expand...
Click to collapse
but you still guys didn't tell me what is the best thing to do :3
should i flash the official firmware first through odin?right now i am on N9005XXUBMI7 firmware can i flash directly the latest firmware MJ7?or click update via kies and then root it?
EDIT:my knox is already 0x1
VodkaPlease said:
but you still guys didn't tell me what is the best thing to do :3
should i flash the official firmware first through odin?right now i am on N9005XXUBMI7 firmware can i flash directly the latest firmware MJ7?or click update via kies and then root it?
EDIT:my knox is already 0x1
Click to expand...
Click to collapse
You should tell us earlier that you knox is tripped with 0x1.
Then it will be very easy. You can flash through either Mobile Odin Pro or PC Odin. MOP should be able to retain your root access (clicking the Everrot option). If you flash through PC Odin, then use CF Auto Root to re-root your Note 3
williamyi said:
You should tell us earlier that you knox is tripped with 0x1.
Then it will be very easy. You can flash through either Mobile Odin Pro or PC Odin. MOP should be able to retain your root access (clicking the Everrot option). If you flash through PC Odin, then use CF Auto Root to re-root your Note 3
Click to expand...
Click to collapse
So just load the latest official rom via odin and check cf auto root and start flashing ? But when I flash a new official rom will I have region lock ?
In odin mode i saw something like this.
ODIN MODE
Product Name: GT-i9505
Current binary: custom
system status : Custom
Knox kernel lock : 0x0
knox warrenty void : 0x1
CSB-CONFIG-LSB: 0x30
Write protection : Enable
eMMC Burst mode: Enabled
I have 4.3 firmware
Can i downgrade my firmware to 4.2.2 ??
or if i get official firmware of 4.4 then can i update it to 4.4 using ODIN??
i am really in delimma i don't know what will happen because of the new bootloader i can work or not.. Just need reply if i cannot downgrade or upgrade using ODIN then it's usless of keeping this phone i have to sell it that's why i need fast reply !!!
No. Can you upgrade to official 4.4 - probably, given if you have the Knox bootloader you can flash firmware the same or newer than what you have, but not firmware with the old bootloader.
nishangrg said:
I have 4.3 firmware
Can i downgrade my firmware to 4.2.2 ??
Click to expand...
Click to collapse
MistahBungle said:
No. Can you upgrade to official 4.4 - probably, given if you have the Knox bootloader you can flash firmware the same or newer than what you have, but not firmware with the old bootloader.
Click to expand...
Click to collapse
thankyou but is there any possible solution to downgrade to 4.2.2??
i have heard if i downgrade my bootloader then i can install 4.2.2 is it true??
*cough*
I've already answered your question (and the answer is easily found in hundreds of different threads here/elsewhere anyway). And as I said to someone else on here a week or so ago, I find repeating myself tedious in the extreme.
Hello guys,
I've installed a ROM 6.0.1 with some N6 items, and haven't pay attention, but this ROM was for N910C.
Then, I'm trying to change it back, installing some N910H rom, trying to do the reverse thing, but it was not successful.
Somebody know hot to get my N910H back again??
xicko said:
Hello guys,
I've installed a ROM 6.0.1 with some N6 items, and haven't pay attention, but this ROM was for N910C.
Then, I'm trying to change it back, installing some N910H rom, trying to do the reverse thing, but it was not successful.
Somebody know hot to get my N910H back again??
Click to expand...
Click to collapse
Anybody??
xicko said:
Anybody??
Click to expand...
Click to collapse
Downlod samsung usb drivers & odin tool in your windows pc & Flash N910H official stock firmware
http://www.sammobile.com/firmwares/database/SM-N910H/
After flash firmware in odin make sure you do wipe cache & factory reset from recovery your model will be reverse back to N910H again.
Trex888 said:
Downlod samsung usb drivers & odin tool in your windows pc & Flash N910H official stock firmware
http://www.sammobile.com/firmwares/database/SM-N910H/
After flash firmware in odin make sure you do wipe cache & factory reset from recovery your model will be reverse back to N910H again.
Click to expand...
Click to collapse
Hi Trex888, thanks for your answer,
I already tried this solution, but I cant flash stock via Odin. I assume the phone is checking if the stock rom is n910c, and it gives me an error.
Do you want me to post the error?
Thanks!
xicko said:
Hi Trex888, thanks for your answer,
I already tried this solution, but I cant flash stock via Odin. I assume the phone is checking if the stock rom is n910c, and it gives me an error.
Do you want me to post the error?
Thanks!
Click to expand...
Click to collapse
Go to download mode and Check what exactly your model number is on top of screen and tell me
trex888 said:
go to download mode and check what exactly your model number is on top of screen and tell me
Click to expand...
Click to collapse
odin mode
product name: Sm-n910c
current binary: Custom
system status: Custom
reactivation lock: Off
secure download: Enabled
knox warranty void: 1
ap swrev: 2
xicko said:
odin mode
product name: Sm-n910c
current binary: Custom
system status: Custom
reactivation lock: Off
secure download: Enabled
knox warranty void: 1
ap swrev: 2
Click to expand...
Click to collapse
did you try to flash N910C occicial firmware ? try if it works then your motherboard is orignally N910C AND YOU CANNOT CONVERT TO N910H no matter which custom rom you flash it cannot change moherboard model
Trex888 said:
did you try to flash N910C occicial firmware ? try if it works then your motherboard is orignally N910C AND YOU CANNOT CONVERT TO N910H no matter which custom rom you flash it cannot change moherboard model
Click to expand...
Click to collapse
Man, I'm laughting a lot!!! I've made a great confusion between my last mobile (g900h) and this one.
I'm sorry. Thanks for your help!!!
Hello Guys
I have Flashed a ROM and i trying to go back to my old Rom but it still Unpossible
I trying to Flash a Stock Rom
Handy Model J500H
Its Possible to Flash a ROM without the BL but if i start my Phone it will have green flickering on the Screen sorry for my Broke english Can anybody help me?
ODIN MODE
PRODUCT NAME : SW-J500H
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FRP LOCK: OFF
WARRANTY VOID: 0x1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1,T1,H1,R1,A2, P1
SW REV CHECK FAIL: (aboot) Fused 2 Binary 1
Hassan313 said:
Hello Guys
I have Flashed a ROM and i trying to go back to my old Rom but it still Unpossible
I trying to Flash a Stock Rom
Handy Model J500H
Its Possible to Flash a ROM without the BL but if i start my Phone it will have green flickering on the Screen sorry for my Broke english Can anybody help me?
ODIN MODE
PRODUCT NAME : SW-J500H
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FRP LOCK: OFF
WARRANTY VOID: 0x1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1,T1,H1,R1,A2, P1
SW REV CHECK FAIL: (aboot) Fused 2 Binary 1
Click to expand...
Click to collapse
You are trying to downgrade from Marshmallow 6.0.1 to Lollipop 5.1.1? If yes, then check this: http://forum.xda-developers.com/galaxy-j5/how-to/warning-flash-marshmallow-updates-t3500396 ...
Thanks for the speedfull reply i try to Flash this Rom AP_J500HXXU1AOFB_CL672792_QB5435108_REV00_user_low_ship_MULTI_CERT.tar
what for a ROM can i use?
#Henkate said:
You are trying to downgrade from Marshmallow 6.0.1 to Lollipop 5.1.1? If yes, then check this: http://forum.xda-developers.com/galaxy-j5/how-to/warning-flash-marshmallow-updates-t3500396 ...
Click to expand...
Click to collapse
Hassan313 said:
Thanks for the speedfull reply i try to Flash this Rom AP_J500HXXU1AOFB_CL672792_QB5435108_REV00_user_low_ship_MULTI_CERT.tar
what for a ROM can i use?
Click to expand...
Click to collapse
I'm sorry, but i didn't understand you.
You are getting "about fused" error when you are trying to downgrade from 6.0.1 to 5.1.1 ?
AP_J500HXXU1AOFB_CL672792_QB5435108_REV00_user_low_ship_MULTI_CERT.tarActually i have this Rom on my Handy and this is Android 6.0.1 but if i Flash this Rom i got a Display like this http://www.pic-upload.de/view-32287105/20161213_123128.jpg.html
What for a Rom i can Flash now for my Smartphone if i try a 5.1 Rom i will got the Error and if i Flash a 6.0.1 Rom i got a Screen like the Picture and allways if i try to Flash with Odin a BL i got this Error
http://www.pic-upload.de/view-32287105/20161213_123128.jpg.html
No Body with an Idea?
Hassan313 said:
No Body with an Idea?
Click to expand...
Click to collapse
Hey worry not. Got the same problem when i was trying to upgrade to 6.0.1 from 5.1.1 j500f. I was using smartcare(hehe not sure) what i did was i flashed my stock rom 5.1.1 through odin then it booted.i went to recovery did a factory reset and then went to advanced wiped dalvik cache.
Sent from my SM-J500F using Tapatalk
I downloaded this from sammobile.com/firmwares/download/114459/J500HXXU2BPK4_J500HODD2BPK3_BNG/ for the j500h model its a Bangladesch Version and it Works Perfectly in Germany the rom is without the German Language for the Gernan language i downloaded from the Playstore the Language Enabler
Hi, I have j510fn and I was a rom tester,
I have a problem since I flashed
J510FNXXU2APK6_J510FNODD2APK2_J510FNXXU2APK2_HOME.tar.md5
to test light stock rom v3 from Kingraheel
what happens is that NOW I can't flash any other firmware by odin... when I click START it says FAIL and in my device there is this text in red
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
I just want to flash my OFFICIAL firmware
J510FNXXU1APG1_J510FNPHE1APG1_J510FNXWU1APFC_HOME.tar.md5
but I can't... only APK6 firmware works on odin... any other firmware works.... can you help me?
I don't have any NANDROID backup of previous versions... only of my actual firmware... APK6
My computer does not detect my device... I have the drivers installed, and I tried on all the USB ports... it charges but not open files.... PLEASE HELP
TheWalkingSans said:
Hi, I have j510fn and I was a rom tester,
I have a problem since I flashed
J510FNXXU2APK6_J510FNODD2APK2_J510FNXXU2APK2_HOME.tar.md5
to test light stock rom v3 from Kingraheel
what happens is that NOW I can't flash any other firmware by odin... when I click START it says FAIL and in my device there is this text in red
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
I just want to flash my OFFICIAL firmware
J510FNXXU1APG1_J510FNPHE1APG1_J510FNXWU1APFC_HOME.tar.md5
but I can't... only APK6 firmware works on odin... any other firmware works.... can you help me?
I don't have any NANDROID backup of previous versions... only of my actual firmware... APK6
My computer does not detect my device... I have the drivers installed, and I tried on all the USB ports... it charges but not open files.... PLEASE HELP
Click to expand...
Click to collapse
No need to post twice.
I heard that you cannot downgrade android due to not allowed downgrade of bootloader (aboot.mbn). So stupid dude.
Hello i have the same problem. But until now i cannot downgrade to 5.1.1 via original firmware but i can install cm 12.1 and others. Via editing the kernel of said rom make it the same with the 6.0.1 bootloader.
---------------------------------------
SOLVED, SAME PROBLEM? CONTACT ME
Sent from my SM-J510FN using XDA Labs
TheWalkingSans said:
---------------------------------------
SOLVED, SAME PROBLEM? CONTACT ME
Sent from my SM-J510FN using XDA Labs
Click to expand...
Click to collapse
Why not writing the solution here or in the warning thread?
People could see it without contacting you, without any delay.
Its a little bit long, but I will post it ASAP
Sent from my SM-J510FN using XDA Labs
---------- Post added at 09:14 PM ---------- Previous post was at 08:51 PM ----------
Here is HOW I SOLVED IT:
This error happens when you before have updated from "U1" to "U2" and then you try to flash a firmware with "U1" (UX appears in the firmware "name")
So, the simple solution is to flash the stock firmware with the same "UX" that you had before your device gor bricked.
In my case, testing KingRaheel's ROMS I flashed an Indian firmware (...U2APK6...) at this moment I didn't know I ****ed up. But don't worry, I simply had updated the "U" and how I didn't know it, I tried to flash lots and lots of firmwares with "U1" without knowing what was happening. After long nights, I tried to flash my last firmware from SPAIN (PHE) with "U2" and it worked.
I hope I helped you. I used SM-J510FN (J5 2016)
If you have another device, try the same but with your current model, any questions, ask by twitter/dm
Sent from my SM-J510FN using XDA Labs
Hello.. help me.. I accidenttaly wiped all my data from TWRP.. When I want to reboot my system it says NO OS INSTALLED.. then I stuck at the TWRP recovery.. I tried to installed new original rom using Odin but always FAIL.. Please help me to fix this issue.. I read about hundreds forum on how to fix NO OS INSTALLED issue but it doesn't help me at all.. How to installed the original j5 SM-J510GN ROM without using Odin?
The only thing that you can do if you dont wanna use odin is downloading a custom ROM, connect phone to PC and paste ROM to SD or Internal Storage and flash it.
Press thanks button if I helped !
Harith Dhiyauddin said:
Hello.. help me.. I accidenttaly wiped all my data from TWRP.. When I want to reboot my system it says NO OS INSTALLED.. then I stuck at the TWRP recovery.. I tried to installed new original rom using Odin but always FAIL.. Please help me to fix this issue.. I read about hundreds forum on how to fix NO OS INSTALLED issue but it doesn't help me at all.. How to installed the original j5 SM-J510GN ROM without using Odin?
Click to expand...
Click to collapse
Use different firmware if it fails.
nch26 said:
The only thing that you can do if you dont wanna use odin is downloading a custom ROM, connect phone to PC and paste ROM to SD or Internal Storage and flash it.
Press thanks button if I helped !
Click to expand...
Click to collapse
Can I flash a .MD5 file in TWRP ?
SpamMachine said:
Use different firmware if it fails.
Click to expand...
Click to collapse
I tried to flash the ROM .zip file but it says the file is corrupt.. what should I do? Please help me..
Harith Dhiyauddin said:
I tried to flash the ROM .zip file but it says the file is corrupt.. what should I do? Please help me..
Click to expand...
Click to collapse
Download the latest Stock Rom for your device from Sammobile and flash it through Odin.
AndroiDTechi said:
Download the latest Stock Rom for your device from Sammobile and flash it through Odin.
Click to expand...
Click to collapse
I've tried to flash the stockrom through odin but Fail
Try to Flash
A Custom Rom first and then flash the stock with Odin...
custom binary block sm-j510gn
Harith Dhiyauddin said:
Hello.. help me.. I accidenttaly wiped all my data from TWRP.. When I want to reboot my system it says NO OS INSTALLED.. then I stuck at the TWRP recovery.. I tried to installed new original rom using Odin but always FAIL.. Please help me to fix this issue.. I read about hundreds forum on how to fix NO OS INSTALLED issue but it doesn't help me at all.. How to installed the original j5 SM-J510GN ROM without using Odin?
Click to expand...
Click to collapse
I HAVE THE SAME ISSUE regarding to custom binary block. HELP me pls i dont know the exact link of firmware.
PRODUCT NAME: SM-J510GN
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FRP LOCK: ON
WARRANTY VOID: 0×1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, H1, R1, A2, P1
SECURE DOWNLOAD: ENABLE
help me pls thank you
jaymins said:
I HAVE THE SAME ISSUE regarding to custom binary block. HELP me pls i dont know the exact link of firmware.
PRODUCT NAME: SM-J510GN
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
FRP LOCK: ON
WARRANTY VOID: 0×1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, H1, R1, A2, P1
SECURE DOWNLOAD: ENABLE
help me pls thank you
Click to expand...
Click to collapse
U can go to sammobile.com and select ur mobile model in it and it shows the latest and oldest roms available for u .it's safe I flashed my device from the stock rom from that website but u should choose ur rom which is available for your country.if u have any questions you can ask me .hope ur problem is solved now .
---------- Post added at 06:13 AM ---------- Previous post was at 06:08 AM ----------
mjhonny14377 said:
U can go to sammobile.com and select ur mobile model in it and it shows the latest and oldest roms available for u .it's safe I flashed my device from the stock rom from that website but u should choose ur rom which is available for your country.but if your problem is with custom binary blocked by frp then u should use latest Odin and then ur stock firmware to be loaded to Odin and hit AP and then start .Odin flashes the rom to ur device but u would loose the data from your internal storage.if u are stuck at a boot loop after flashing. reflash the rom again .it would work .I had a sm-j500f by which I faced the same problem
---------- Post added at 06:13 AM ---------- Previous post was at 06:13 AM ----------
mjhonny14377 said:
U can go to sammobile.com and select ur mobile model in it and it shows the latest and oldest roms available for u .it's safe I flashed my device from the stock rom from that website but u should choose ur rom which is available for your country.if u have any questions you can ask me .hope ur problem is solved now .
---------- Post added at 06:13 AM ---------- Previous post was at 06:08 AM ----------
mjhonny14377 said:
U can go to sammobile.com and select ur mobile model in it and it shows the latest and oldest roms available for u .it's safe I flashed my device from the stock rom from that website but u should choose ur rom which is available for your country.but if your problem is with custom binary blocked by frp then u should use latest Odin and then ur stock firmware to be loaded to Odin and hit AP and then start .Odin flashes the rom to ur device but u would loose the data from your internal storage.if u are stuck at a boot loop after flashing. reflash the rom again .it would work .I had a sm-j500f by which I faced the same problem
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse