Can someone help me fix this error when I'm trying to rooting with the file from ENG-Root-USA.zip(I use the S7edge_Qualcomm.tar from that zip) through Odin 3 v3.14.1 to my Samsung galaxy S7 edge SM-G935T please?
My phone info in Download mode:
PRODUCT NAME: SM-G935T
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
FRP LOCK: OFF
WARANTY VOID: 0x0
QUALCOMM SECURE BOOT: ENABLE
AP SWREV: B11(2, 1, 1, 1, 1) K11 S11
SECURE DOWNLOAD: ENABLE
My phone error: SW REV CHECK Fail : [boot]Fused 11> Binary 1
It quite literally says it.
Binary 11 is newer than binary 1.
Samsung are... Difficult when it comes to downgrading firmwares/basebands
Peterepeat87 said:
It quite literally says it.
Binary 11 is newer than binary 1.
Samsung are... Difficult when it comes to downgrading firmwares/basebands
Click to expand...
Click to collapse
So btw do you have the root file for T mobile samsung galaxy S7 edge because i've tried to search the file on the internet&Youtube and then each link/file i found has already been deleted and yea, now i don't know where should i find the file to root that phone
TheBlueSkull said:
So btw do you have the root file for T mobile samsung galaxy S7 edge because i've tried to search the file on the internet&Youtube and then each link/file i found has already been deleted and yea, now i don't know where should i find the file to root that phone
Click to expand...
Click to collapse
Please dude, there's an info post when you join up with a video about asking n00b questions without searching for yourself first.
Manufacturers > Samsung > T-Moblie S7 Edge page will help you in future.
This should get you going
[2022 Root For S7/S7Edge Oreo Rev4_To_Rev10/A_Odin Flashable Or ADB Method] Plus [Limited Root Method Rev11/B _Using Combo_Firmware]
Oreo Root For The S7/S7E (Will work on Rev4-Rev10/A Bootloader) Adb Install A big thanks goes out to @klabit87 he is 99 percent the reason we have root! Also @stang5litre and stang5litre test group. Prefered Root Method Oreo Only Using Odin...
forum.xda-developers.com
Also be careful with other sites with Odin downloads, some are dodgy. Find one on here. You shouldn't need one as new as 3.14 for an S7, although in the linked thread they have instructions for both odin and adb.
I recommend reading through the whole thread first. It's great to learn from the mistakes others have made so you don't have to make them yourself
Related
Hello first time poster long time reader here finally got rid of my old iphone 3gs and upgraded to a galaxy s4 loving it so far
I attempted my first root / rom change yesterday and tried out the google edition wasn't really my thing so i went back to the stock firmware and had a few questions / worries about what i have done so far and was hoping someone here may give some guidance
So i used this firmware from sammobile
GT-I9505 Galaxy S 4 LTE
PDA: I9505XXUBMEA
CSC: I9505XSABME4
MODEM: I9505DVUBME4
Added: 2013-06-03
I am assuming this is the correct one for my phone as its a i9505 and not branded by any carrier and i obviously live in australia
I put this firmware on and everythings running fine i can do the updates again because right now im not rooted anymore
My questions are as followed
1.I read that if you flash an official firmware it won't increase your binary counter does this included the google edition the 1 i used was
(http://forum.xda-developers.com/showthread.php?t=2348272)
2.How can i verify if my binary counter is 0 and that if i needed to claim warranty i would not be void i have put the phone into download mode and currently it says the following which i hope means everything is good to go
ODIN MODE
Product Name : GT-I9505
Current Binary : Samsung Official
System Status : Official
CSB-CONFIG-LSB : 0x30
Write Protection : Enabled
From everything i have read so far this would indicate binary counter is 0 and warranty can be claimed can someone verify this for me and give me some pace of mind
Thanks in advance !
Edit : sorry forgot to tick question box
You can use TriangleAway to reset counter:
http://forum.xda-developers.com/showthread.php?t=1494114
Hey guys
I have a Canadian Note 3 model 900W8
Yesterday I had to flash back to the stock firmware due to a bootloop issue I had...
Today I tried to re-root my Note 3...and when I press start in Odin, it fails.
I'm doing the exact same method I did the first time I rooted it, and it fails. In dowlnoad mode, the tiniest bit of progress is made and it just stops.
I believe it says recovery failed in download mode.
I've tried to do this on two different computers using various USB ports.
I have developer mode enabled, and usb debugger is also enabled.
Anyone have any ideas?
Thanks
Were you able to root using the same setup before?
Sent from my SM-N900W8 using xda app-developers app
---------- Post added at 04:35 PM ---------- Previous post was at 04:34 PM ----------
What firmware are you on 4.3 or 4.4?
Sent from my SM-N900W8 using xda app-developers app
I'm currently on 4.3
and yes it worked the exact same way last time...I'm not sure what I'm doing wrong this time...
I'm not able to post the url to the site that I used last time to root my phone....maybe if I space it out lol
www . android . gs / root-install-twrp-recovery-canada-galaxy-note-3-n900w8/
but yeah it worked perfectly fine when I did it last month
Try using cf auto root which you can find in the original android Dev section ( make sure you download the one for 4.3 ). If you're not successful in using Twrp, try Cwm as custom recovery ( although I'm using Twrp on 4.4 right now ).
alright so I tried again
in ODIN mode this is what I see
ODIN MODE
PRODUCT NAME: SM-N900W8
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
REACTIVATION LOCK: ON
KNOX KERNEL LOCK: 0X0
KNOX WARRANTY VOID: 0X1
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWERV: S2, T2, R2, A2, P2
WRITE PROTECTION: ENABLE
and this appears after the flash fails
SECURE CHECK FAIL: recovery
HulkSmash316 said:
alright so I tried again
in ODIN mode this is what I see
ODIN MODE
PRODUCT NAME: SM-N900W8
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
REACTIVATION LOCK: ON
KNOX KERNEL LOCK: 0X0
KNOX WARRANTY VOID: 0X1
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWERV: S2, T2, R2, A2, P2
WRITE PROTECTION: ENABLE
and this appears after the flash fails
SECURE CHECK FAIL: recovery
Click to expand...
Click to collapse
Ouch, you tripped your KNOX. Okay no worries. You're currently on 4.3 bootloader, and if you're trying to flash the 4.4.2 firmware - http://forum.xda-developers.com/showthread.php?t=2614772
I suggest you do that first.
Yeah I rooted my phone a month ago and tripped knox
I'm not upset about it or anything...
Thanks for the help, I'll give what you suggested a shot right now and will reply with the results
HulkSmash316 said:
Yeah I rooted my phone a month ago and tripped knox
I'm not upset about it or anything...
Thanks for the help, I'll give what you suggested a shot right now and will reply with the results
Click to expand...
Click to collapse
You have to turn off reactivation lock then flash again. It can be found in the security settings.
hey_joe said:
You have to turn off reactivation lock then flash again. It can be found in the security settings.
Click to expand...
Click to collapse
I have to turn off reactivation lock and flash again?
I already did step 1 of what nicholaschum suggested I do, and I have 4.4.2 installed now.
Before going through the setup process of setting up my phone, I went to root it immediately, but I got hte same failure I've been getting...
I assumed it's because I have to enable USB debugging...so I setup my phone...has me enter my login/password for my phone becuase of reactivation lock...confirm 4.4.2 is installed....enable dev mode.....check usb debugging....
So before I do anything further I just want to get confirmation....after checking reactivation lock in security settings (for some reason it wasn't checked just now when I looked even though I had to login with the info when I first booted the phone after flashing to 4.4.2)
do I flash 4.4.2 again and continue with what nicholaschum said to do?
HulkSmash316 said:
I have to turn off reactivation lock and flash again?
I already did step 1 of what nicholaschum suggested I do, and I have 4.4.2 installed now.
Before going through the setup process of setting up my phone, I went to root it immediately, but I got hte same failure I've been getting...
I assumed it's because I have to enable USB debugging...so I setup my phone...has me enter my login/password for my phone becuase of reactivation lock...confirm 4.4.2 is installed....enable dev mode.....check usb debugging....
So before I do anything further I just want to get confirmation....after checking reactivation lock in security settings (for some reason it wasn't checked just now when I looked even though I had to login with the info when I first booted the phone after flashing to 4.4.2)
do I flash 4.4.2 again and continue with what nicholaschum said to do?
Click to expand...
Click to collapse
You can continue what you are doing just make sure it says off when you are in download mode.
---------- Post added at 07:52 PM ---------- Previous post was at 07:50 PM ----------
I think as long as reactivation lock is on in download mode you won't get root or flash custom recovery.
Hey guys
I now have a rooted Note 3 running Kitkat 4.4.2
Huge thank you to you both of you who helped me this evening.
Now my biggest problem is trying to figure out what rom I want to install.
What would you guys recommend? The only ones I know are Jedi......xnote and wicked.
Basically don't want an bloatware that comes stock with Samsung devices lol
I personally use vision x n3 from the tmobile section as it comes stock and just add my own customization courtesy of xposed installer. Having said that, each of us has their own preferences so read the features that appeal to you and take that rim for a spin. Some roms though need a fix for bt, wifi and nfc along with a kernel that supports them in order to function especially those based on n9005.
hey_joe said:
I personally use vision x n3 from the tmobile section as it comes stock and just add my own customization courtesy of xposed installer. Having said that, each of us has their own preferences so read the features that appeal to you and take that rim for a spin. Some roms though need a fix for bt, wifi and nfc along with a kernel that supports them in order to function especially those based on n9005.
Click to expand...
Click to collapse
So the roms that are compatible for our N900W8 are for the n9005?
HulkSmash316 said:
So the roms that are compatible for our N900W8 are for the n9005?
Click to expand...
Click to collapse
I think every rom made for a note 3 snapdragon ( N9005, N900T, N900A, etc..) will work on our N900W8 except as i mentioned, the wifi,bt and nfc which will need a fix. I found that only AT&T and Tmobile roms don't need a fix for wifi,bt and nfc, They work right off the bat. Problem is there's not many 4.4 based rom from them because of their locked bootloader. If you're still looking for a good rom to try, give Knoxraid 3.5 a spin.
HulkSmash316 said:
Hey guys
I now have a rooted Note 3 running Kitkat 4.4.2
Huge thank you to you both of you who helped me this evening.
Now my biggest problem is trying to figure out what rom I want to install.
What would you guys recommend? The only ones I know are Jedi......xnote and wicked.
Basically don't want an bloatware that comes stock with Samsung devices lol
Click to expand...
Click to collapse
Check out the Canadian Galaxy Note 3 Users thread: http://forum.xda-developers.com/showthread.php?t=2464292
I personally use X-Note 10. But you can use ANY N9005 ROM provided you DON'T INSTALL KERNEL AND BOOT WITH IT. Follow this guide here to run custom ROMs on 4.4.2. Skip to Part Three. http://forum.xda-developers.com/showthread.php?t=2614772
Hello
i have the SM-N910C running the official lollipop firmware,
days ago i've rooted it using CF auto root through the odin,
And it was successful, but the question is the CF auto root
replacing the stock Kernel to another one while flashing ?
cause when i reset flash counter using triangle away even without restarting the phone it still shows in triangle away:
counter: 1
Binary: custom
system: official
but in bootloader it says:
current binary: samsung official
system status: official
secure download : enabled
knox warranty void: 1
rp swrev: 1
and the reactivation lock is off in the settings and the bootloader
i just need the software updates after root
and resetting the flash counter to Zero
and to know the kernel is it stock or custom
anyone could help ?
and sorry for any bad english, thanks.
Mr.3bood said:
Hello
i have the SM-N910C running the official lollipop firmware,
days ago i've rooted it using CF auto root through the odin,
And it was successful, but the question is the CF auto root
replacing the stock Kernel to another one while flashing ?
cause when i reset flash counter using triangle away even without restarting the phone it still shows in triangle away:
counter: 1
Binary: custom
system: official
but in bootloader it says:
current binary: samsung official
system status: official
secure download : enabled
knox warranty void: 1
rp swrev: 1
and the reactivation lock is off in the settings and the bootloader
i just need the software updates after root
and resetting the flash counter to Zero
and to know the kernel is it stock or custom
anyone could help ?
and sorry for any bad english, thanks.
Click to expand...
Click to collapse
Hi, cf autoroot doesnt replace your kernel, so u should still have stock kernel.
and also as far as i know, triangle away doesnt work on note 4 ... so right now there is no way to reset the counter to zero.
and 1 more thing is you may have posted this question in the wrong thread, you should have posted it in the Q&A thread. ^^
randykzc said:
Hi, cf autoroot doesnt replace your kernel, so u should still have stock kernel.
and also as far as i know, triangle away doesnt work on note 4 ... so right now there is no way to reset the counter to zero.
and 1 more thing is you may have posted this question in the wrong thread, you should have posted it in the Q&A thread. ^^
Click to expand...
Click to collapse
Thanks a lot , i'll try different ways to reset it, if i succeed i'll wrrite a thread about it
Mr.3bood said:
Thanks a lot , i'll try different ways to reset it, if i succeed i'll wrrite a thread about it
Click to expand...
Click to collapse
Good luck trying to figure out how to reset that counter permanently - so far no one managed to find a way to do that since the introduction of KNOX back in 2013.
Few days ago I purchased the lovely C9 pro online from HK, as a regular user I discovered that Knox can't be installed, secure folder isn't active and the disaster that software update (firm ware upgrade) option is missing! So I thought if I Web partition or hard reset from the recovery mode will help to solve this problems but when launched the recovery mode I found one line only.... Custom Binary (Boot) blocked by FRP lock...
Please advice
haythams said:
Few days ago I purchased the lovely C9 pro online from HK, as a regular user I discovered that Knox can't be installed, secure folder isn't active and the disaster that software update (firm ware upgrade) option is missing! So I thought if I Web partition or hard reset from the recovery mode will help to solve this problems but when launched the recovery mode I found one line only.... Custom Binary (Boot) blocked by FRP lock...
Please advice
Click to expand...
Click to collapse
I installed knox and its work with no problem
even secure folder works fine for me
my phone was CHINA firmware but I flash hongkong QA2 with odin to get google service
Unfortunately I discovered that my knox is void and I complaint to Samsung but no respond due date, I'm on the HK rom sin e purchased
haythams said:
Few days ago I purchased the lovely C9 pro online from HK, as a regular user I discovered that Knox can't be installed, secure folder isn't active and the disaster that software update (firm ware upgrade) option is missing! So I thought if I Web partition or hard reset from the recovery mode will help to solve this problems but when launched the recovery mode I found one line only.... Custom Binary (Boot) blocked by FRP lock...
Please advice
Click to expand...
Click to collapse
1)You are facing Custom binary blocked by frp lock because you haven't enabled Oem unlocking option from developers option..
2)Now the way to overcome is flash latest stock firmware for your model no and country using odin
3)What is your model no and country?
4)If hongkong is your country and c9000 is model no then here you can find latest 6.0.1 firmware
https://www.sammobile.com/firmwares/download/121194/C9000ZHU1AQA2_C9000ZZH1AQA2_TGY/
5)i assume your familiar with odin flashing,if not then let me know..i will provide you odin flashing guide
DroidHackeR said:
1)You are facing Custom binary blocked by frp lock because you haven't enabled Oem unlocking option from developers option..
2)Now the way to overcome is flash latest stock firmware for your model no and country using odin
3)What is your model no and country?
4)If hongkong is your country and c9000 is model no then here you can find latest 6.0.1 firmware
https://www.sammobile.com/firmwares/download/121194/C9000ZHU1AQA2_C9000ZZH1AQA2_TGY/
5)i assume your familiar with odin flashing,if not then let me know..i will provide you odin flashing guide
Click to expand...
Click to collapse
Thanks for your kind response
All been done as been explained but the rom been flashed via smart swich as a normal upgrade process.,the only main problem that my device still deknoxed and secure folder is not working due to unauthorized software
? even its been updated by samsung smart swich
ask helping
Can you provide me c9000 rom hongkong version on external link download? Thank you if you can , please notif me or send me a link: [email protected]
Looking for Stock firmware for Samsung Galaxy C9 Pro
Looking for Stock firmware for Samsung Galaxy C9 Pro (Model - SM-C900F/DS) of India. My device is struck at "Custom Binary Blocked by FRP. SECURE MODE: KERNEL" after flashing custom firmware on device.
durgapal said:
Looking for Stock firmware for Samsung Galaxy C9 Pro (Model - SM-C900F/DS) of India. My device is struck at "Custom Binary Blocked by FRP. SECURE MODE: KERNEL" after flashing custom firmware on device.
Click to expand...
Click to collapse
Try check here Hope it helps.
Looking for Stock firmware for Samsung Galaxy C9 Pro
My device is struck at "Custom Binary Blocked by FRP. SECURE MODE: KERNEL" after flashing custom firmware on the phone "KingRoot" I think its chineese Dual sim
Samsung galaxy C9 Pro - SMC9000
durgapal said:
Looking for Stock firmware for Samsung Galaxy C9 Pro (Model - SM-C900F/DS) of India. My device is struck at "Custom Binary Blocked by FRP. SECURE MODE: KERNEL" after flashing custom firmware on device.
Click to expand...
Click to collapse
I have the same problem, I'm from Portugal and I bought my phone from china. I' don´t know how to solve this problem. At Sammobile.com this phone is not available.
i face the same problem as above. I purchase this set in India and presently using in Saudi. Samsung Galaxy Pro C9, model. C900F/DS. any one help how to overcome problem "Custom binary blocked by FRP"
I tried rooting my s7 edge sf-g935f (European device) trying this method, https://forum.xda-developers.com/s7-edge/how-to/samsung-galaxy-s7-edge-root-exynos-t3646942
I got a failed verification and went back into twrp and accidentally wiped my whole phone including OS :crying::crying:
I still have access to downloader and twrp i have downloaded firmware but cannot get to install OS.
can someone please please help me or point me in the right direction
Greatly appreciated
Thanks
Alan
*** edit***
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G935F
Current Binary: Custom
System Status: Official
FRP LOCK: OFF
Secure Download: Enabled
Warranty Void: 1 (0x030c)
RP SWREV: B:2 K:0 S:0
When odin runs I get SW REV. Check Fail. Device 2, Binary: 1
Please anyone, I managed to install firmware but now my imei etc is unknown.
If someone can even point in right direction
Lads and girls, I'm begging for some help
Please someone must have some idea on how to help me out.
Please.
bupbups said:
Please someone must have some idea on how to help me out.
Please.
Click to expand...
Click to collapse
I think you should download official firmware and flash it using Odin ( i am no expert nor i have this device)this is just what i used to do with my older Samsung mobiles and i dont have any new Samsung device. i am going to buy s7 edge so i was here. hope this helps
nicholes said:
I think you should download official firmware and flash it using Odin ( i am no expert nor i have this device)this is just what i used to do with my older Samsung mobiles and i dont have any new Samsung device. i am going to buy s7 edge so i was here. hope this helps
Click to expand...
Click to collapse
Thanks Nicholes
Any idea where I could even get official firmware
Really appreciate your help
bupbups said:
Thanks Nicholes
Any idea where I could even get official firmware
Really appreciate your help
Click to expand...
Click to collapse
Here you go dear