Database Users

[Q] Recovery Mode Disappeared

Running Samsung-SGH-I337 Galaxy S4 AT&T with 4.2.2, rooted and encrypted of course, I've been trying to flash a custom recovery such as CWM via ROM Manager and also TWRP via GooManager as well as other attempts to get the custom recovery working. When ROM Manager or GooManager tries to set things up it says it works, but when I reboot into recovery mode it actually goes into Download/Odin mode instead. Even if I use the volume up method of getting into recovery mode (download mode is volume down) it goes to download mode instead. I've even rebooted to recovery mode via adb, still goes to download instead. What?

Try flashing it with Odin.

I haven't found a TWRP method that works for the ATT I337 via ODIN. Not sure how that would make a difference either though.

i dont about twrp why not use Philz Touch CWM ?
i can send your a link, pm me if you're interested

I tried flashing the version from here: goo. im/devs/philz_touch/CWM_Advanced_Edition/jflteatt but it fails every time. I've tried different verions of the ATT CWM Advanced Edition as well as different versions of Odin. I've read maybe it had something to do with a locked bootloader? Haven't been able to find much good information on that for my phone.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Parad0x86 said:
I tried flashing the version from here: goo. im/devs/philz_touch/CWM_Advanced_Edition/jflteatt but it fails every time. I've tried different verions of the ATT CWM Advanced Edition as well as different versions of Odin. I've read maybe it had something to do with a locked bootloader? Haven't been able to find much good information on that for my phone.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
have you tried other versions of Odin?

Hi,
I'd like to remember you that you have a specific forum for your device
http://forum.xda-developers.com/galaxy-s4-att
People there should be of better help than here .
~Lord

XxLordxX said:
Hi,
I'd like to remember you that you have a specific forum for your device
http://forum.xda-developers.com/galaxy-s4-att
People there should be of better help than here .
~Lord
Click to expand...
Click to collapse
Thanks, I didn't realize I had to look at "All" forums to find my device's forum since the default is just "Top Devices" and didn't see it. If this can be moved please do.
I've been reading and from what I've gathered, since I have MF3 firmware my bootloader is locked down and my only bet is to use Safestrap. I'll be looking into this.
Edit: Also I use encryption which is apparently not a good idea with Safestrap so I'm probably SOL. Awesome.

[Q] Help rooting Note 4 N910F

Hi,
Hope someone can help me. I'm having problems rooting my Note 4 N910F. Initially I tried CF's autoroot but my phone went into a loop with the message "CF Auto Root, Set Warranty bit : recovery" message appearing in the top left. I could not get it out of this, so then tried to install TWRP recovery. This seemed to be successful as the phone rebooted and i was able to use my phone again. See Odin log :
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
However when I tried to get into TWRP it simply boots into the stock android recovery. When i try to do a OTA update now I get the message " The operating system on your device has been modified...."
Thanks
Paul

Ok Think I've worked this out for myself. Think with CF autoroot I needed a special file that was posted by a Tony on here for my version of the N910F. Tried the TWRP again with Odin and did not do an automatic reboot this time. Pulled the battery and booted into recovery and have TWRP. Seems my phone was automatically replacing TWRP with stock recovery.
Hope this helps somebody else out!

Boot Loop and ..

.. I can't access recovery, though I am in download mode.
I have Odin downloaded and running. I can't seem to find my firmware (I haven't done this in so long, might as well be a n00b again) .. I'm looking for the stock firmware for SM-G900V(confirmed) .. Yeah, it's Verizon -_- .. Can't a fat kid get a drum stick?
I'll try looking some more while someone can try to help? Thanks in advance, I really need my phone .. like most people lol doctors appointments and disability stuff. Help a fatty out!

The latest full wipe stock:
https://www.androidfilehost.com/?fid=457095661767134383
Or choose what you need here: https://forum.xda-developers.com/verizon-galaxy-s5/general/odin-update-qa1-t3548544

I must be doing something wrong, I keep getting "Auth Fail" from Odin

n0kkie said:
I must be doing something wrong, I keep getting "Auth Fail" from Odin
Click to expand...
Click to collapse
I can see only 2 possible reasons:
1. It's not a SM-G900V, check "Product name" string in Odin mode.
2. The cable is not good, try another one.

<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

bbsc said:
I can see only 2 possible reasons:
1. It's not a SM-G900V, check "Product name" string in Odin mode.
2. The cable is not good, try another one.
Click to expand...
Click to collapse
That's where I got the info initially .. and good idea! I'll try another cord!

bbsc said:
I can see only 2 possible reasons:
1. It's not a SM-G900V, check "Product name" string in Odin mode.
2. The cable is not good, try another one.
Click to expand...
Click to collapse
Ok, I've tried three different cords, two of which are brand new, and no dice.

I had one successful try on Odin .. Then it started boot looping again .. ugh

I Give Up

n0kkie said:
I Give Up
Click to expand...
Click to collapse
So do I.
If you had a successful try, this means that you've flashed a correct firmware at least once.
If the phone still bootloops, it looks like a hardware problem.
I'd be glad to mistake.

[Please HELP] -----Loop on start + stuck on Samsung logo and now failed to mount/efs

Hi Guys,
I was try to flash with some rom and get error like the title.
First my s8 keep loop on starting. Spend a lot of time to fix that, so happy after go in to the rom.
How ever I have new error with the signal - No service ( circle slash)
Try again with odin on CSC but not work at all.
And now... Fail on mount efs.
I can't even flash rom anymore, even after flash rom it keep loop as the error .
I tried to research on the google, even try with the Z3X... but...
My last chance is asking help from you guys, otherwise as some guy say " samsung service asking for $300 for motherboard ... bla bla "
Help me if you can,
Many thanks,

Do you have nandroid backup or EFS backup ?

zelenko said:
Do you have nandroid backup or EFS backup ?
Click to expand...
Click to collapse
Yeah - that's promblem. I don't have it
Also living in Australia, I though problem from CSC and firmware with VAU region.
But actually not ...
So do I have anychance to do with the EFS?

try to flash latest firmware with july patches ....it should fix the problem

GoJun said:
Hi Guys,
I was try to flash with some rom and get error like the title.
First my s8 keep loop on starting. Spend a lot of time to fix that, so happy after go in to the rom.
How ever I have new error with the signal - No service ( circle slash)
Try again with odin on CSC but not work at all.
And now... Fail on mount efs.
I can't even flash rom anymore, even after flash rom it keep loop as the error .
I tried to research on the google, even try with the Z3X... but...
My last chance is asking help from you guys, otherwise as some guy say " samsung service asking for $300 for motherboard ... bla bla "
Help me if you can,
Many thanks,
Click to expand...
Click to collapse
Have you used adb before will that let u flash just the twrp package or dose it fail. and then in twrp flash youre efs backup the only other way i know is trying different official firmwares like you was.

Thank guys,
Omg one day without phone--- no internet for very long day - LOL
with the july patch now. Let see how it going.
Also I still can run to TWRP but after run the rom , it still loop stop on logo samsung.

khawarjaved said:
try to flash latest firmware with july patches ....it should fix the problem
Click to expand...
Click to collapse
Actualy, It's a Fail...
It says:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 5627 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Red line: SW REV. Check Fail ( bootloader) Device 3. Binary: 2

GoJun said:
Thank guys,
Omg one day without phone--- no internet for very long day - LOL
with the july patch now. Let see how it going.
Also I still can run to TWRP but after run the rom , it still loop stop on logo samsung.
Click to expand...
Click to collapse
Hoping that I'm not spamming...
Trying to follow the youtube and got this?
[email protected] C:\platform-tools
> adb devices
List of devices attached
ce11171b8bb2ef2a05 recovery
[email protected] C:\platform-tools
> adb shell
~ # su
/sbin/sh: su: not found
~ #
Where am I wrong?

Sorry for the spam,
I just update the last thing i just do.
Now it went back to the old Adnroid Recovery... and I can't update it to the TWRP anymore...
Also can't use the adb for the flash too..
Is that my last chance is go to the Samsung store ..?

GoJun said:
Actualy, It's a Fail...
It says:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 5627 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Red line: SW REV. Check Fail ( bootloader) Device 3. Binary: 2
Click to expand...
Click to collapse
It fails because you are flashing an older firmware man look for firmware with end CRF7 or something like that... Its giving error because you are flashing a firmware with older bootloader

khawarjaved said:
It fails because you are flashing an older firmware man look for firmware with end CRF7 or something like that... Its giving error because you are flashing a firmware with older bootloader
Click to expand...
Click to collapse
Thanks so much, another chance for me.
Let me try again...
So I tried with BL_G950FXXU2CRF7_CL13760092_QB18535731_REV00_user_low_ship.
And got this:
<ID:0/004> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 7 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Should I keep try the other BL one?

I tried with SM-G950F_1_20180717083127_fdfqza9z56_fac\BL_G950FXXU3CRGB_CL13971786_QB18969145_REV00_user_low_ship.tar.md5
And got success.

Congratulations man... Its working good?

It can root - But no service - Can boot to the phone - keep looping... GG
If can't do anything to fix, I think i have to go to service by samsung.

Man factory reset it once.clear storage etc.

Unroot and reset back to "as new"

So I got a Samsung Galaxy S8, and installed TWRP. I by mistake deleted the OS, so I have no OS on the phone now, I want to remove all the root and ****, and make it like a new one without any root. How can I do this?
I have tried multiple stuff using odin, but it looks like it stuck on <ID:0/005> SetupConnection.. all the time. Help please?

Have you tried flashing the same android version as before through Odin using the original cable?
i.e. you had android 7.0 and you're flashing 7.0 now and not trying to upgrade/downgrade

SevenD2 said:
Have you tried flashing the same android version as before through Odin using the original cable?
i.e. you had android 7.0 and you're flashing 7.0 now and not trying to upgrade/downgrade
Click to expand...
Click to collapse
How exactly? All I know is that I had Android 8.0, and bought the phone from Norway.

xScylez said:
How exactly? All I know is that I had Android 8.0, and bought the phone from Norway.
Click to expand...
Click to collapse
Follow this thread:
https://forum.xda-developers.com/galaxy-s8/how-to/official-stock-firmware-update-odin-t3598172
I'm assuming it's a G950F if you purchased it in Norway so the official firmware from:
https://www.sammobile.com/firmwares/galaxy-s8/SM-G950F/
and then follow the xda thread above

SevenD2 said:
Follow this thread:
https://forum.xda-developers.com/galaxy-s8/how-to/official-stock-firmware-update-odin-t3598172
I'm assuming it's a G950F if you purchased it in Norway so the official firmware from:
https://www.sammobile.com/firmwares/galaxy-s8/SM-G950F/
and then follow the xda thread above
Click to expand...
Click to collapse
I will have a look at it when I get home tonight.
I did manage to install GoogleWiz : - but I want to just reset everything, and make it as new. Hope it works with the links you sent.
EDIT: Haha the link you sent with download says Approx. 15 kB/Sec. This will take a day to download

xScylez said:
I will have a look at it when I get home tonight.
I did manage to install GoogleWiz : - but I want to just reset everything, and make it as new. Hope it works with the links you sent.
EDIT: Haha the link you sent with download says Approx. 15 kB/Sec. This will take a day to download
Click to expand...
Click to collapse
Use this instead https://updato.com/firmware-archive-select-model

update Odin

xScylez said:
So I got a Samsung Galaxy S8, and installed TWRP. I by mistake deleted the OS, so I have no OS on the phone now, I want to remove all the root and ****, and make it like a new one without any root. How can I do this?
I have tried multiple stuff using odin, but it looks like it stuck on <ID:0/005> SetupConnection.. all the time. Help please?
Click to expand...
Click to collapse
note that you will not be able to restore it 100%. Knox is and will be forever broken on your phone. And for that, all Knox related functions won't work either.

SevenD2 said:
Follow this thread:
https://forum.xda-developers.com/galaxy-s8/how-to/official-stock-firmware-update-odin-t3598172
I'm assuming it's a G950F if you purchased it in Norway so the official firmware from:
https://www.sammobile.com/firmwares/galaxy-s8/SM-G950F/
and then follow the xda thread above
Click to expand...
Click to collapse
After loading all and press Start i get this:
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 5641 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and when using the home_csc i get this:
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> userdata.img
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 3834 M
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)

Maybe trying using Prince comsy Odin
https://drive.google.com/file/d/1enVG5a_ocyjhRlta8AX_0b7LLoHWciVU/view
(Not my link)
Given you were able to install TWRP I assume your phone can connect to your laptop so idk why it's not working. A quick Google search found people used older versions of Odin to get it working.